Basic Configuration 1401 topics

A place to discuss basic configurations like probe input, homing etc.

Subject	Replies / Views	Last Post
What am I doing wrong? (Mill vs Lathe speed) Topic started 03 Dec 2011 17:45, by Harry_Y Last Post 05 Dec 2011 00:07 by Harry_Y 1 2	Replies:10 Views:9130	Harry_Y Last Post by Harry_Y 05 Dec 2011 00:07
Can Scales be used to close the loop? Topic started 20 Oct 2011 22:21, by DroopG96 Last Post 03 Dec 2011 05:43 by garymcrobertpdx	Replies:9 Views:9761	garymcrobertpdx Last Post by garymcrobertpdx 03 Dec 2011 05:43
Does this pin assignment look OK? Topic started 01 Dec 2011 14:26, by Harry_Y Last Post 02 Dec 2011 20:24 by Harry_Y	Replies:8 Views:6867	Harry_Y Last Post by Harry_Y 02 Dec 2011 20:24
Waiting for operator. Topic started 19 Nov 2011 00:02, by sheetmetal Last Post 19 Nov 2011 03:18 by sheetmetal	Replies:2 Views:4295	sheetmetal Last Post by sheetmetal 19 Nov 2011 03:18
Z DIR PROBLEM AND OUT FOR RELAY Topic started 17 Nov 2011 16:13, by cncdtgrouter Last Post 18 Nov 2011 10:31 by cncdtgrouter	Replies:2 Views:3437	cncdtgrouter Last Post by cncdtgrouter 18 Nov 2011 10:31
axis has fliped Topic started 12 Nov 2011 11:28, by guyver001 Last Post 12 Nov 2011 13:01 by guyver001	Replies:2 Views:2871	guyver001 Last Post by guyver001 12 Nov 2011 13:01
Resolvers to Encoders Topic started 01 Nov 2011 23:14, by SRT Last Post 09 Nov 2011 21:16 by jmelson	Replies:7 Views:10.5k	jmelson Last Post by jmelson 09 Nov 2011 21:16
fine tuning - x-axis resolution - HELP!! Topic started 23 Oct 2011 21:03, by whampoo Last Post 07 Nov 2011 11:41 by BigJohnT 1 2 3	Replies:29 Views:24.7k	Last Post by BigJohnT 07 Nov 2011 11:41
Spindle index-enable for threading repeat passes. Topic started 17 Oct 2011 13:00, by NICKKINSMAN Last Post 31 Oct 2011 17:38 by NICKKINSMAN 1 2 3	Replies:21 Views:20.1k	NICKKINSMAN Last Post by NICKKINSMAN 31 Oct 2011 17:38
Two stepper motors on one axis - help needed Topic started 23 Oct 2011 18:04, by DaveAK Last Post 24 Oct 2011 00:52 by DaveAK	Replies:2 Views:6227	DaveAK Last Post by DaveAK 24 Oct 2011 00:52
Deviation problem with configured axis Topic started 14 Oct 2011 11:57, by Tilman Last Post 19 Oct 2011 17:23 by andypugh 1 2 3	Replies:28 Views:24.1k	Last Post by andypugh 19 Oct 2011 17:23
Pushbutton To Relay Control Topic started 30 Sep 2011 11:55, by NICKKINSMAN Last Post 06 Oct 2011 17:34 by NICKKINSMAN	Replies:7 Views:9507	NICKKINSMAN Last Post by NICKKINSMAN 06 Oct 2011 17:34
Stepper moving in only one direction Topic started 02 Oct 2011 00:44, by tduckman Last Post 03 Oct 2011 09:03 by andypugh	Replies:2 Views:5314	Last Post by andypugh 03 Oct 2011 09:03
Homng moving away from home Topic started 03 Sep 2011 16:47, by TarHeelTom Last Post 03 Oct 2011 08:00 by TarHeelTom 1 2	Replies:18 Views:16.1k	TarHeelTom Last Post by TarHeelTom 03 Oct 2011 08:00
How would one configure Kolmorgen drives in EMC. Topic started 16 Sep 2011 01:15, by cnczky Last Post 17 Sep 2011 05:11 by jmelson	Replies:2 Views:3468	jmelson Last Post by jmelson 17 Sep 2011 05:11
Camview-emc configuration Topic started 30 Aug 2011 13:07, by Vider Last Post 30 Aug 2011 13:07 by Vider	Replies:0 Views:4932	Vider Last Post by Vider 30 Aug 2011 13:07
Pocket number does not update Topic started 26 Aug 2011 18:23, by GStewart Last Post 29 Aug 2011 18:51 by GStewart 1 2	Replies:11 Views:11.9k	GStewart Last Post by GStewart 29 Aug 2011 18:51
axis are moving but direction is wrong Topic started 11 Aug 2011 14:02, by wbeppler Last Post 18 Aug 2011 15:57 by wbeppler	Replies:6 Views:9389	wbeppler Last Post by wbeppler 18 Aug 2011 15:57
Wizard stepconf: not possible to modify values ! Topic started 13 Aug 2011 17:23, by michel Last Post 14 Aug 2011 12:55 by BigJohnT	Replies:5 Views:4857	Last Post by BigJohnT 14 Aug 2011 12:55
ignore limit switch do not work Topic started 11 Aug 2011 14:11, by wbeppler Last Post 11 Aug 2011 14:27 by BigJohnT	Replies:1 Views:4617	Last Post by BigJohnT 11 Aug 2011 14:27

Time to create page: 0.170 seconds