How to add inputs and outputs to iocontrol
22 Jun 2009 11:22 #470
by BigJohnT
Replied by BigJohnT on topic Re:How to add inputs and outputs to iocontrol
pyVCP and HAL.
John
John
Please Log in or Create an account to join the conversation.
23 Jun 2009 08:37 #471
by kreshnik
Replied by kreshnik on topic Re:How to add inputs and outputs to iocontrol
Thank you guys for your help.
For this project (with MINI interface in TCL) I decided to add 5 inputs and 5 outputs directly to the source code and I rebuild EMC.
It seems working.
In the future I'll use pyVCP and HAL.
Bye
For this project (with MINI interface in TCL) I decided to add 5 inputs and 5 outputs directly to the source code and I rebuild EMC.
It seems working.
In the future I'll use pyVCP and HAL.
Bye
Please Log in or Create an account to join the conversation.
Time to create page: 0.090 seconds