Research Paper using LinuxCNC for ASEE
30 Oct 2014 02:50 #52557
by mcenter
Research Paper using LinuxCNC for ASEE was created by mcenter
This is a paper that I presented at the American Society of Engineering Educators (ASEE) 2014 Midwest Conference.
It is based on a research apparatus I made about three years ago. It is probably more "interesting" than useful.
uafs.edu/sites/default/files/users/Center.pdf
Mark Center
University of Arkansas
It is based on a research apparatus I made about three years ago. It is probably more "interesting" than useful.
uafs.edu/sites/default/files/users/Center.pdf
Mark Center
University of Arkansas
Please Log in or Create an account to join the conversation.
30 Oct 2014 19:45 - 30 Oct 2014 19:46 #52576
by andypugh
Replied by andypugh on topic Research Paper using LinuxCNC for ASEE
The planer mentioned would be the ideal machine for investigating
this sort of thing:
A stationary camera and long, straight workpiece would be a good combination.
A stationary camera and long, straight workpiece would be a good combination.
Last edit: 30 Oct 2014 19:46 by andypugh.
Please Log in or Create an account to join the conversation.
Moderators: HansU
Time to create page: 0.171 seconds