1. Hardware & Machines
  3. Milling Machines
  5. Mikron WF 2/3 DCM

Mikron WF 2/3 DCM

More
11 Nov 2021 22:29 #226154 by Mikron1207
Mikron WF 2/3 DCM was created by Mikron1207
I'm retrofitting a Mikron WF 2/3 DCM, does anyone have a circuit diagram for the Heidenhain TNC 145RT or 145 CR? Everything that is useful for the transmission control. Which communication protocol is used between the TNC 145 and the Mikron control?   
Attachments:

Please Log in or Create an account to join the conversation.

More
06 Dec 2021 23:13 #228481 by tommylight
Replied by tommylight on topic Mikron WF 2/3 DCM
Are there supposed to be two of the same pictures ?
We would need the other picture with A20 in it.

Please Log in or Create an account to join the conversation.

More
01 Dec 2022 21:51 - 01 Dec 2022 21:52 #258263 by Vojta333
Replied by Vojta333 on topic Mikron WF 2/3 DCM
I have complete manual for Mikron WF 40 C (31,5-3150 RPM) and hire is the bitcode for speeds and for M03,M04,M05 codes

docs.google.com/spreadsheets/d/15ErQ2TpD...xoE/edit?usp=sharing

I have TNC 145C and Bit 1 is J2/2, Bit 2 is J2/3 ... Bit 8 is J2/9
Last edit: 01 Dec 2022 21:52 by Vojta333.

Please Log in or Create an account to join the conversation.

Moderators: piasdom
  1. Hardware & Machines
  3. Milling Machines
  5. Mikron WF 2/3 DCM
Time to create page: 0.109 seconds
Powered by Kunena Forum