help for driver information
- revolter
-
Topic Author
- Visitor
-
26 Mar 2010 21:01 #2458
by revolter
help for driver information was created by revolter
i bought the q2hb44 driver
and i want to drive a stepper motor with it. in steoconf there is 4 box for driver information. Step Time , Step Space , Direction Hold , Direction Setup
i found its information in my driver datasheet. but when i use them for drive the motor my motor doesnt move!
could some one help me to find my correct information and driver information boxes?
and i want to drive a stepper motor with it. in steoconf there is 4 box for driver information. Step Time , Step Space , Direction Hold , Direction Setup
i found its information in my driver datasheet. but when i use them for drive the motor my motor doesnt move!
could some one help me to find my correct information and driver information boxes?
Please Log in or Create an account to join the conversation.
27 Mar 2010 12:04 #2461
by BigJohnT
Replied by BigJohnT on topic Re:help for driver information
Try doubling the time values and see if it moves. If not then something else might be wrong.
www.linuxcnc.org/docview/html//common_Stepper_Diagnostics.html
John
www.linuxcnc.org/docview/html//common_Stepper_Diagnostics.html
John
Please Log in or Create an account to join the conversation.
Time to create page: 0.125 seconds