mill@mill-desktop:~$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbfff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfff0000 (usable) [ 0.000000] modified: 00000000bfff0000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37369000 - 37fef6f9 [ 0.000000] Allocated new RAMDISK: 008b5000 - 0153b6f9 [ 0.000000] Move RAMDISK from 0000000037369000 - 0000000037fef6f8 to 008b5000 - 0153b6f8 [ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219) [ 0.000000] 2183MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000 - 00008b0db8] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008b1000 - 00008b4135] BRK ==> [00008b1000 - 00008b4135] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008b5000 - 000153b6f9] NEW RAMDISK ==> [00008b5000 - 000153b6f9] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bfff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfff0 [ 0.000000] On node 0 totalpages: 786303 [ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c153d200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4368 pages used for memmap [ 0.000000] HighMem zone: 554722 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: Intel [ 0.000000] MPTABLE: Product ID: Eaglelake [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Processor #2 [ 0.000000] Processor #3 [ 0.000000] I/O APIC #4 Version 32 at 0xFEC00000. [ 0.000000] Processors: 4 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @c3000000 s74936 r0 d23368 u1048576 [ 0.000000] pcpu-alloc: s74936 r0 d23368 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780159 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=9ae85006-7662-42cd-b895-9dd1c6d1e27c ro vga=792 splash quiet splash noacpi isolcpus=1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] allocated 15728000 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bfff0) [ 0.000000] Memory: 3082368k/3145664k available (4539k kernel code, 61912k reserved, 1928k data, 620k init, 2236360k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB) [ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB) [ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] I-pipe 2.6-03: pipeline enabled. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2500.341 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.68 BogoMIPS (lpj=10001364) [ 0.004018] Security Framework initialized [ 0.004034] AppArmor: AppArmor initialized [ 0.004039] Mount-cache hash table entries: 512 [ 0.004138] Initializing cgroup subsys ns [ 0.004141] Initializing cgroup subsys cpuacct [ 0.004144] Initializing cgroup subsys memory [ 0.004150] Initializing cgroup subsys devices [ 0.004152] Initializing cgroup subsys freezer [ 0.004154] Initializing cgroup subsys net_cls [ 0.004169] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004171] CPU: L2 cache: 2048K [ 0.004173] CPU: Physical Processor ID: 0 [ 0.004175] CPU: Processor Core ID: 0 [ 0.004178] mce: CPU supports 6 MCE banks [ 0.004184] CPU0: Thermal monitoring enabled (TM2) [ 0.004191] Performance Events: Core2 events, Intel PMU driver. [ 0.004198] ... version: 2 [ 0.004199] ... bit width: 40 [ 0.004201] ... generic registers: 2 [ 0.004202] ... value mask: 000000ffffffffff [ 0.004204] ... max period: 000000007fffffff [ 0.004205] ... fixed-purpose events: 3 [ 0.004207] ... event mask: 0000000700000003 [ 0.004210] Checking 'hlt' instruction... OK. [ 0.020800] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.020804] ftrace: allocating 21003 entries in 42 pages [ 0.028503] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.028562] ExtINT not setup in hardware but reported by MP table [ 0.028667] alloc irq_desc for 16 on node 0 [ 0.028669] alloc kstat_irqs on node 0 [ 0.028672] alloc irq_desc for 17 on node 0 [ 0.028673] alloc kstat_irqs on node 0 [ 0.028676] alloc irq_desc for 18 on node 0 [ 0.028677] alloc kstat_irqs on node 0 [ 0.028680] alloc irq_desc for 19 on node 0 [ 0.028682] alloc kstat_irqs on node 0 [ 0.028684] alloc irq_desc for 23 on node 0 [ 0.028686] alloc kstat_irqs on node 0 [ 0.028818] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.032001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.032001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.032001] ..... (found apic 0 pin 0) ... [ 0.076252] ....... works. [ 0.076254] CPU0: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz stepping 0a [ 0.184132] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.272074] CPU1: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz stepping 0a [ 0.272083] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.276087] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.008000] Initializing CPU#2 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 2 [ 0.008000] CPU2: Thermal monitoring enabled (TM2) [ 0.364028] CPU2: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz stepping 0a [ 0.364037] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.368080] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.008000] Initializing CPU#3 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 3 [ 0.008000] CPU3: Thermal monitoring enabled (TM2) [ 0.456069] CPU3: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz stepping 0a [ 0.456079] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.460012] Brought up 4 CPUs [ 0.460014] Total of 4 processors activated (20001.51 BogoMIPS). [ 0.461070] CPU0 attaching sched-domain: [ 0.461073] domain 0: span 0,2-3 level CPU [ 0.461075] groups: 0 2-3 (cpu_power = 2048) [ 0.461082] CPU2 attaching sched-domain: [ 0.461083] domain 0: span 2-3 level MC [ 0.461086] groups: 2 3 [ 0.461089] domain 1: span 0,2-3 level CPU [ 0.461092] groups: 2-3 (cpu_power = 2048) 0 [ 0.461097] CPU3 attaching sched-domain: [ 0.461099] domain 0: span 2-3 level MC [ 0.461101] groups: 3 2 [ 0.461104] domain 1: span 0,2-3 level CPU [ 0.461106] groups: 2-3 (cpu_power = 2048) 0 [ 0.461217] devtmpfs: initialized [ 0.461217] regulator: core version 0.5 [ 0.461217] NET: Registered protocol family 16 [ 0.461217] Trying to unpack rootfs image as initramfs... [ 0.461217] EISA bus registered [ 0.461217] PCI: Using configuration type 1 for base access [ 0.461217] bio: create slab <bio-0> at 0 [ 0.461217] ACPI: Interpreter disabled. [ 0.461217] vgaarb: loaded [ 0.461217] SCSI subsystem initialized [ 0.461253] libata version 3.00 loaded. [ 0.461253] usbcore: registered new interface driver usbfs [ 0.461253] usbcore: registered new interface driver hub [ 0.461253] usbcore: registered new device driver usb [ 0.461253] PCI: Probing PCI hardware [ 0.461253] PCI: Probing PCI hardware (bus 00) [ 0.461253] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.461253] pci 0000:00:01.0: PME# disabled [ 0.461253] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.461253] pci 0000:00:1c.0: PME# disabled [ 0.461253] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.461253] pci 0000:00:1c.1: PME# disabled [ 0.461253] pci 0000:00:1d.0: reg 20 io port: [0xcc00-0xcc1f] [ 0.464011] pci 0000:00:1d.1: reg 20 io port: [0xc880-0xc89f] [ 0.464055] pci 0000:00:1d.2: reg 20 io port: [0xc800-0xc81f] [ 0.464098] pci 0000:00:1d.3: reg 20 io port: [0xc480-0xc49f] [ 0.464145] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe9ffc00-0xfe9fffff] [ 0.464192] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.464196] pci 0000:00:1d.7: PME# disabled [ 0.464305] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.464309] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.464312] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 0.464316] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017) [ 0.464319] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff) [ 0.464355] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.464361] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.464367] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7] [ 0.464373] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb] [ 0.464379] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.464414] pci 0000:00:1f.2: reg 10 io port: [0xc400-0xc407] [ 0.464419] pci 0000:00:1f.2: reg 14 io port: [0xc080-0xc083] [ 0.464425] pci 0000:00:1f.2: reg 18 io port: [0xc000-0xc007] [ 0.464430] pci 0000:00:1f.2: reg 1c io port: [0xbc00-0xbc03] [ 0.464435] pci 0000:00:1f.2: reg 20 io port: [0xb880-0xb88f] [ 0.464457] pci 0000:00:1f.2: PME# supported from D3hot [ 0.464460] pci 0000:00:1f.2: PME# disabled [ 0.464500] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.464546] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.464555] pci 0000:01:00.0: reg 18 64bit mmio: [0xfeaf0000-0xfeafffff] [ 0.464560] pci 0000:01:00.0: reg 20 io port: [0xd000-0xd0ff] [ 0.464569] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfeac0000-0xfeadffff] [ 0.464586] pci 0000:01:00.0: supports D1 D2 [ 0.464614] pci 0000:01:00.1: reg 10 64bit mmio: [0xfeaec000-0xfeaeffff] [ 0.464646] pci 0000:01:00.1: supports D1 D2 [ 0.464686] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.464689] pci 0000:00:01.0: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.464693] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.464773] pci 0000:03:00.0: reg 10 io port: [0xe800-0xe8ff] [ 0.464792] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xfdfff000-0xfdffffff] [ 0.464805] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xfdff8000-0xfdffbfff] [ 0.464813] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfebe0000-0xfebfffff] [ 0.464850] pci 0000:03:00.0: supports D1 D2 [ 0.464852] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.464856] pci 0000:03:00.0: PME# disabled [ 0.464902] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff] [ 0.464905] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.464911] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.464954] pci 0000:00:1e.0: transparent bridge [ 0.465207] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.465296] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:27b8] [ 0.465417] NetLabel: Initializing [ 0.465419] NetLabel: domain hash size = 128 [ 0.465420] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.465430] NetLabel: unlabeled traffic allowed by default [ 0.465456] Switching to clocksource tsc [ 0.466145] AppArmor: AppArmor Filesystem Enabled [ 0.466148] pnp: PnP ACPI: disabled [ 0.466151] PnPBIOS: Scanning system for PnP BIOS support... [ 0.466159] PnPBIOS: Found PnP BIOS installation structure at 0xc00f5a40 [ 0.466162] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x6d1a, dseg 0xf0000 [ 0.466825] PnPBIOS: 20 nodes reported by PnP BIOS; 20 recorded by driver [ 0.466835] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 0.466838] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 0.466841] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.466844] system 00:00: iomem range 0xbfff0000-0xbfffffff has been reserved [ 0.466847] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.466849] system 00:00: iomem range 0xfff00000-0xffffffff has been reserved [ 0.466852] system 00:00: iomem range 0x1000-0x13ff could not be reserved [ 0.466861] system 00:0c: ioport range 0xa00-0xadf has been reserved [ 0.466866] system 00:0e: ioport range 0x4d0-0x4d1 has been reserved [ 0.466868] system 00:0e: ioport range 0xcf8-0xcff could not be reserved [ 0.466871] system 00:0e: ioport range 0x480-0x4bf has been reserved [ 0.466874] system 00:0e: ioport range 0x800-0x87f has been reserved [ 0.466877] system 00:0e: ioport range 0x8f0-0x8ff has been reserved [ 0.466879] system 00:0e: ioport range 0xae0-0xaef has been reserved [ 0.466883] system 00:0e: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.466888] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved [ 0.466893] system 00:10: ioport range 0x4700-0x470b has been reserved [ 0.467069] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.467072] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.467076] pci 0000:00:01.0: MEM window: 0xfea00000-0xfeafffff [ 0.467080] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.467084] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.467087] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 0.467091] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff [ 0.467095] pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff [ 0.467101] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.467104] pci 0000:00:1c.1: IO window: 0xe000-0xefff [ 0.467108] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff [ 0.467112] pci 0000:00:1c.1: PREFETCH window: 0x000000fdf00000-0x000000fdffffff [ 0.467117] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.467119] pci 0000:00:1e.0: IO window: disabled [ 0.467123] pci 0000:00:1e.0: MEM window: disabled [ 0.467127] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.467142] pci 0000:00:01.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.467146] pci 0000:00:01.0: setting latency timer to 64 [ 0.467152] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.467157] pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.467161] pci 0000:00:1c.0: setting latency timer to 64 [ 0.467170] pci 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 0.467174] pci 0000:00:1c.1: setting latency timer to 64 [ 0.467180] pci 0000:00:1e.0: setting latency timer to 64 [ 0.467184] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.467186] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.467189] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.467191] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.467193] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.467196] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 0.467198] pci_bus 0000:02: resource 1 mem: [0xc0000000-0xc01fffff] [ 0.467201] pci_bus 0000:02: resource 2 pref mem [0xc0200000-0xc03fffff] [ 0.467203] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.467205] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.467208] pci_bus 0000:03: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.467210] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.467213] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff] [ 0.467242] NET: Registered protocol family 2 [ 0.467324] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.467580] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.467875] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.468044] TCP: Hash tables configured (established 131072 bind 65536) [ 0.468047] TCP reno registered [ 0.468123] NET: Registered protocol family 1 [ 0.494480] pci 0000:01:00.0: Boot video device [ 0.494793] Scanning for low memory corruption every 60 seconds [ 0.494869] audit: initializing netlink socket (disabled) [ 0.494880] type=2000 audit(1314094878.494:1): initialized [ 0.502246] highmem bounce pool size: 64 pages [ 0.502251] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.503699] VFS: Disk quotas dquot_6.5.2 [ 0.503753] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.504260] fuse init (API version 7.13) [ 0.504337] msgmni has been set to 1654 [ 0.504633] alg: No test for stdrng (krng) [ 0.504690] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.504693] io scheduler noop registered [ 0.504695] io scheduler anticipatory registered [ 0.504697] io scheduler deadline registered [ 0.504730] io scheduler cfq registered (default) [ 0.504841] alloc irq_desc for 24 on node -1 [ 0.504844] alloc kstat_irqs on node -1 [ 0.504851] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.504856] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.504931] alloc irq_desc for 25 on node -1 [ 0.504933] alloc kstat_irqs on node -1 [ 0.504940] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.504947] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.505035] alloc irq_desc for 26 on node -1 [ 0.505037] alloc kstat_irqs on node -1 [ 0.505043] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.505050] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.505116] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.505149] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.506295] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.506383] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.506431] isapnp: Scanning for PnP cards... [ 0.506485] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.506783] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.506907] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.507919] brd: module loaded [ 0.508327] loop: module loaded [ 0.508394] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.508466] ata_piix 0000:00:1f.1: version 2.13 [ 0.508478] ata_piix 0000:00:1f.1: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 0.508507] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.511915] scsi0 : ata_piix [ 0.518462] scsi1 : ata_piix [ 0.518498] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.518500] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.518526] ata_piix 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19 [ 0.518531] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.518561] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.518606] scsi2 : ata_piix [ 0.518652] scsi3 : ata_piix [ 0.518681] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19 [ 0.518683] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19 [ 0.518979] Fixed MDIO Bus: probed [ 0.519009] PPP generic driver version 2.4.2 [ 0.519053] tun: Universal TUN/TAP device driver, 1.6 [ 0.519055] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.519127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.519144] ehci_hcd 0000:00:1d.7: PCI->APIC IRQ transform: INT A -> IRQ 23 [ 0.519157] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.519160] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.519192] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.519209] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.519218] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.523097] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.523107] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9ffc00 [ 0.538465] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.538570] usb usb1: configuration #1 chosen from 1 choice [ 0.538596] hub 1-0:1.0: USB hub found [ 0.538603] hub 1-0:1.0: 8 ports detected [ 0.538662] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.538678] uhci_hcd: USB Universal Host Controller Interface driver [ 0.538713] uhci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23 [ 0.538722] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.538725] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.538758] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.538781] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00 [ 0.538853] usb usb2: configuration #1 chosen from 1 choice [ 0.538875] hub 2-0:1.0: USB hub found [ 0.538881] hub 2-0:1.0: 2 ports detected [ 0.538918] uhci_hcd 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19 [ 0.538923] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.538925] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.538953] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.538973] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c880 [ 0.539045] usb usb3: configuration #1 chosen from 1 choice [ 0.539067] hub 3-0:1.0: USB hub found [ 0.539072] hub 3-0:1.0: 2 ports detected [ 0.539110] uhci_hcd 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 0.539115] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.539118] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.539144] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.539168] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800 [ 0.539240] usb usb4: configuration #1 chosen from 1 choice [ 0.539261] hub 4-0:1.0: USB hub found [ 0.539267] hub 4-0:1.0: 2 ports detected [ 0.539304] uhci_hcd 0000:00:1d.3: PCI->APIC IRQ transform: INT D -> IRQ 16 [ 0.539309] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.539312] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.539338] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.539361] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c480 [ 0.539438] usb usb5: configuration #1 chosen from 1 choice [ 0.539460] hub 5-0:1.0: USB hub found [ 0.539465] hub 5-0:1.0: 2 ports detected [ 0.539556] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 [ 0.539888] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.539895] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.539959] mice: PS/2 mouse device common for all mice [ 0.540028] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.540048] rtc0: alarms up to one day, 114 bytes nvram [ 0.540140] device-mapper: uevent: version 1.0.3 [ 0.540246] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.540330] device-mapper: multipath: version 1.1.0 loaded [ 0.540332] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.540427] EISA: Probing bus 0 at eisa.0 [ 0.540432] Cannot allocate resource for EISA slot 1 [ 0.540451] EISA: Detected 0 cards. [ 0.540453] cpuidle: using governor ladder [ 0.540455] cpuidle: using governor menu [ 0.540819] TCP cubic registered [ 0.540954] NET: Registered protocol family 10 [ 0.541329] lo: Disabled Privacy Extensions [ 0.541602] NET: Registered protocol family 17 [ 0.541628] Using IPI No-Shortcut mode [ 0.541690] registered taskstats version 1 [ 0.541959] rtc_cmos 00:04: setting system clock to 2011-08-23 10:21:19 UTC (1314094879) [ 0.541962] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.541963] EDD information not available. [ 0.573456] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.737331] Freeing initrd memory: 12825k freed [ 0.738569] ata4.00: HPA unlocked: 312579695 -> 312581808, native 312581808 [ 0.738573] ata4.00: ATA-8: WDC WD1600AAJS-08B4A0, 01.03A01, max UDMA/100 [ 0.738576] ata4.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.755105] ata4.00: configured for UDMA/100 [ 0.766543] ata3.00: HPA unlocked: 488395055 -> 488397168, native 488397168 [ 0.766547] ata3.00: ATA-8: ST3250318AS, CC38, max UDMA/133 [ 0.766549] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.782767] ata3.00: configured for UDMA/133 [ 0.860325] isapnp: No Plug & Play device found [ 0.882666] ata1.00: ATAPI: SONY DVD RW DW-D22A, BYS2, max UDMA/66 [ 0.882696] ata1.01: ATAPI: ATAPI DVD A DH20A4P, 9P54, max UDMA/66 [ 0.898563] ata1.00: configured for UDMA/66 [ 0.930562] ata1.01: configured for UDMA/66 [ 0.932456] scsi 0:0:0:0: CD-ROM SONY DVD RW DW-D22A BYS2 PQ: 0 ANSI: 5 [ 0.936161] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 0.936165] Uniform CD-ROM driver Revision: 3.20 [ 0.936269] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.936323] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.937377] scsi 0:0:1:0: CD-ROM ATAPI DVD A DH20A4P 9P54 PQ: 0 ANSI: 5 [ 0.942522] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.942606] sr 0:0:1:0: Attached scsi CD-ROM sr1 [ 0.942641] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 0.942777] scsi 2:0:0:0: Direct-Access ATA ST3250318AS CC38 PQ: 0 ANSI: 5 [ 0.942887] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 0.942890] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 0.942935] sd 2:0:0:0: [sda] Write Protect is off [ 0.942937] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.942960] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.942980] scsi 3:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5 [ 0.943076] sd 3:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 0.943078] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 0.943089] sda: [ 0.943178] sd 3:0:0:0: [sdb] Write Protect is off [ 0.943180] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.943204] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.943327] sdb: sdb1 [ 0.958897] sd 3:0:0:0: [sdb] Attached SCSI disk [ 0.969224] sda1 sda2 < sda5 > [ 0.997188] sd 2:0:0:0: [sda] Attached SCSI disk [ 0.997213] Freeing unused kernel memory: 620k freed [ 0.997483] Write protecting the kernel text: 4540k [ 0.997523] Write protecting the kernel read-only data: 1668k [ 1.014169] udev: starting version 151 [ 1.054289] Linux agpgart interface v0.103 [ 1.072993] [drm] Initialized drm 1.1.0 20060810 [ 1.075428] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.075445] r8169 0000:03:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17 [ 1.075478] r8169 0000:03:00.0: setting latency timer to 64 [ 1.075518] alloc irq_desc for 27 on node -1 [ 1.075520] alloc kstat_irqs on node -1 [ 1.075533] r8169 0000:03:00.0: irq 27 for MSI/MSI-X [ 1.076023] eth0: RTL8168d/8111d at 0xf80e8000, 40:61:86:7d:28:15, XID 081000c0 IRQ 27 [ 1.102686] [drm] radeon defaulting to kernel modesetting. [ 1.102689] [drm] radeon kernel modesetting enabled. [ 1.102726] radeon 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 1.102731] radeon 0000:01:00.0: setting latency timer to 64 [ 1.103826] [drm] radeon: Initializing kernel modesetting. [ 1.103943] [drm] register mmio base: 0xFEAF0000 [ 1.103945] [drm] register mmio size: 65536 [ 1.104012] ATOM BIOS: 113 [ 1.104030] [drm] Clocks initialized ! [ 1.104057] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 1.104059] [drm] Detected VRAM RAM=256M, BAR=256M [ 1.104061] [drm] RAM width 64bits DDR [ 1.104096] [TTM] Zone kernel: Available graphics memory: 430194 kiB. [ 1.104098] [TTM] Zone highmem: Available graphics memory: 1548374 kiB. [ 1.104111] [drm] radeon: 256M of VRAM memory ready [ 1.104113] [drm] radeon: 512M of GTT memory ready. [ 1.104148] alloc irq_desc for 28 on node -1 [ 1.104151] alloc kstat_irqs on node -1 [ 1.104161] radeon 0000:01:00.0: irq 28 for MSI/MSI-X [ 1.104168] [drm] radeon: using MSI. [ 1.104195] [drm] radeon: irq initialized. [ 1.104198] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.104438] [drm] Loading RV710 Microcode [ 1.104441] platform radeon_cp.0: firmware: requesting radeon/RV710_pfp.bin [ 1.105651] platform radeon_cp.0: firmware: requesting radeon/RV710_me.bin [ 1.106923] platform radeon_cp.0: firmware: requesting radeon/R700_rlc.bin [ 1.155122] [drm] ring test succeeded in 1 usecs [ 1.155264] [drm] radeon: ib pool ready. [ 1.155334] [drm] ib test succeeded in 0 usecs [ 1.155475] [drm] Radeon Display Connectors [ 1.155477] [drm] Connector 0: [ 1.155479] [drm] VGA [ 1.155481] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 1.155483] [drm] Encoders: [ 1.155484] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 1.155486] [drm] Connector 1: [ 1.155487] [drm] HDMI-A [ 1.155489] [drm] HPD1 [ 1.155491] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 1.155493] [drm] Encoders: [ 1.155495] [drm] DFP1: INTERNAL_UNIPHY [ 1.155496] [drm] Connector 2: [ 1.155498] [drm] DVI-I [ 1.155499] [drm] HPD4 [ 1.155501] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c [ 1.155503] [drm] Encoders: [ 1.155504] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 1.155506] [drm] DFP2: INTERNAL_UNIPHY2 [ 1.288555] [drm] fb mappable at 0xD0141000 [ 1.288558] [drm] vram apper at 0xD0000000 [ 1.288559] [drm] size 5242880 [ 1.288561] [drm] fb depth is 24 [ 1.288562] [drm] pitch is 5120 [ 1.288618] fb0: radeondrmfb frame buffer device [ 1.288620] registered panic notifier [ 1.288624] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 1.293055] Console: switching to colour frame buffer device 160x64 [ 1.436507] vesafb: framebuffer at 0xd0000000, mapped to 0xf8e00000, using 3072k, total 3072k [ 1.436510] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 1.436512] vesafb: scrolling: redraw [ 1.436515] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.436635] fb1: VESA VGA frame buffer device [ 1.718198] xor: automatically using best checksumming function: pIII_sse [ 1.734349] pIII_sse : 9023.000 MB/sec [ 1.734351] xor: using function: pIII_sse (9023.000 MB/sec) [ 1.736466] device-mapper: dm-raid45: initialized v0.2594b [ 1.927230] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 1.927235] EXT4-fs (sda1): write access will be enabled during recovery [ 3.311822] EXT4-fs (sda1): orphan cleanup on readonly fs [ 3.311830] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12325245 [ 3.311900] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12325120 [ 3.311916] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12321125 [ 3.311931] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12325926 [ 3.311945] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12325933 [ 3.311960] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 12325931 [ 3.311973] EXT4-fs (sda1): 6 orphan inodes deleted [ 3.311976] EXT4-fs (sda1): recovery complete [ 3.551498] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 11.719264] udev: starting version 151 [ 11.739549] Adding 9069560k swap on /dev/sda5. Priority:-1 extents:1 across:9069560k [ 11.752107] lp: driver loaded but no devices found [ 11.829420] intel_rng: FWH not detected [ 11.890653] HDA Intel 0000:01:00.1: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 11.890682] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 11.914379] type=1505 audit(1314094890.872:2): operation="profile_load" pid=561 name="/sbin/dhclient3" [ 11.914534] type=1505 audit(1314094890.872:3): operation="profile_replace" pid=590 name="/sbin/dhclient3" [ 11.914953] type=1505 audit(1314094890.872:4): operation="profile_load" pid=561 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.915162] type=1505 audit(1314094890.872:5): operation="profile_replace" pid=590 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.915301] type=1505 audit(1314094890.872:6): operation="profile_load" pid=561 name="/usr/lib/connman/scripts/dhclient-script" [ 11.915511] type=1505 audit(1314094890.872:7): operation="profile_replace" pid=590 name="/usr/lib/connman/scripts/dhclient-script" [ 11.989216] psmouse serio1: ID: 10 00 64 [ 12.100851] type=1505 audit(1314094891.056:8): operation="profile_load" pid=812 name="/usr/share/gdm/guest-session/Xsession" [ 12.102980] type=1505 audit(1314094891.060:9): operation="profile_load" pid=817 name="/usr/sbin/tcpdump" [ 12.103742] type=1505 audit(1314094891.060:10): operation="profile_load" pid=816 name="/usr/lib/cups/backend/cups-pdf" [ 12.103754] type=1505 audit(1314094891.060:11): operation="profile_replace" pid=813 name="/sbin/dhclient3" [ 12.172765] r8169: eth0: link up [ 12.172770] r8169: eth0: link up [ 12.597005] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 13.767129] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 14.789915] I-pipe: Domain RTAI registered. [ 14.789921] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [ 14.789923] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [ 14.790003] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 14.790005] PIPELINE layers: [ 14.790007] f995de20 9ac15d93 RTAI 200 [ 14.790009] c085cb20 0 Linux 100 [ 14.834856] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>. [ 14.864664] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes. [ 14.864669] RTAI[sched]: hard timer type/freq = APIC/20833037(Hz); default timing: periodic; linear timed lists. [ 14.864672] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2500341000 hz. [ 14.864674] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 14.864736] RTAI[usi]: enabled. [ 14.929104] RTAI[math]: loaded. [ 15.207483] config string '0x378 out ' [ 15.255313] classicladder_rt: module license 'LGPL' taints kernel. [ 15.255316] Disabling lock debugging due to kernel taint [ 15.257094] creating ladder-state [ 22.777060] eth0: no IPv6 routers present [ 74.629036] ppdev: user-space parallel port driver [ 195.229143] RTAPI: ERROR: Unexpected realtime delay on task 1 [ 195.229163] This Message will only display once per session. [ 195.229164] Run the Latency Test and resolve before continuing. [ 676.316260] PNPBIOS fault.. attempting recovery. [ 676.316263] PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue [ 676.316265] PnPBIOS: You may need to reboot with the "pnpbios=off" option to operate stably [ 676.316267] PnPBIOS: Check with your vendor for an updated BIOS [ 676.316270] PnPBIOS: set_dev_node: unexpected status 0x3a [ 676.316272] probe_parport 00:0b: disable failed [ 676.396251] RTAI[math]: unloaded. [ 676.415330] SCHED releases registered named ALIEN RTGLBH [ 676.476447] RTAI[malloc]: unloaded. [ 676.576212] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 676.578406] I-pipe: Domain RTAI unregistered. [ 676.578497] RTAI[hal]: unmounted. [ 679.707828] I-pipe: Domain RTAI registered. [ 679.707833] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [ 679.707835] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [ 679.707938] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 679.707940] PIPELINE layers: [ 679.707942] f9df1e20 9ac15d93 RTAI 200 [ 679.707944] c085cb20 0 Linux 100 [ 679.722817] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>. [ 679.723138] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes. [ 679.723144] RTAI[sched]: hard timer type/freq = APIC/20833037(Hz); default timing: periodic; linear timed lists. [ 679.723147] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2500341000 hz. [ 679.723149] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 679.723202] RTAI[usi]: enabled. [ 679.750738] RTAI[math]: loaded. [ 679.826622] config string '0x378 out ' [ 679.834823] creating ladder-state [ 2892.091838] udev: starting version 151 [ 2906.527746] PnPBIOS: get_dev_node: function not supported on this system [ 2906.527750] probe_parport 00:0b: disable failed [ 2906.562396] RTAI[math]: unloaded. [ 2906.577688] SCHED releases registered named ALIEN RTGLBH [ 2906.638715] RTAI[malloc]: unloaded. [ 2906.738471] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 2906.740625] I-pipe: Domain RTAI unregistered. [ 2906.740722] RTAI[hal]: unmounted. [ 2908.985940] I-pipe: Domain RTAI registered. [ 2908.985945] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [ 2908.985947] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [ 2908.986024] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 2908.986025] PIPELINE layers: [ 2908.986028] fa3afe20 9ac15d93 RTAI 200 [ 2908.986030] c085cb20 0 Linux 100 [ 2909.001704] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>. [ 2909.002020] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes. [ 2909.002025] RTAI[sched]: hard timer type/freq = APIC/20833037(Hz); default timing: periodic; linear timed lists. [ 2909.002028] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2500341000 hz. [ 2909.002031] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 2909.002084] RTAI[usi]: enabled. [ 2909.026800] RTAI[math]: loaded. [ 2909.097063] config string '0x378 out ' [ 2909.104575] creating ladder-state mill@mill-desktop:~$