(12:22:27am)> linuxcnc remora-nvem.ini 
LINUXCNC - 2.9.2-168-ge7cd5217d9
Machine configuration directory is '/home/alex/linuxcnc/configs/remora_EC500_touch'
Machine configuration file is 'remora-nvem.ini'
Starting LinuxCNC...
linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod num_dio=11
Note: Using POSIX realtime
twopass:invoked with <> options
twopass:found ./01_remora-nvem.hal
twopass:found ./10_USB_buttons.hal
twopass:pass0: loadusr -W hal_manualtoolchange
twopass:pass0: loadusr -W hal_input -KRAL DragonRise
note: name is 'DragonRise Inc.   Generic   USB  Joystick  '
[QTvcp][INFO]  INFO logging on (qtvcp:544)
[QTvcp.QTVCP.QT_PSTAT][INFO]  Using DEFAULT handler file path: /usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py (qt_pstat.py:129)
[QTvcp.QTVCP.QT_PSTAT][INFO]  Using DEFAULT ui file from: /usr/share/qtvcp/screens/qtdragon/qtdragon.ui (qt_pstat.py:161)
[QTvcp.QTVCP.QT_PSTAT][INFO]  Using LOCAL resources.py file from: /home/alex/linuxcnc/configs/remora_EC500_touch/qtvcp/screens/qtdragon/resources.py (qt_pstat.py:254)
[QTvcp.QTVCP.QT_PSTAT][INFO]  Using no translations, default system locale is: en (qt_pstat.py:284)
[QTvcp][INFO]  Building A LinuxCNC Main Screen with: Python 3 (qtvcp:151)
[QTvcp][INFO]  No handler file specified on command line. (qtvcp:159)
[QTvcp][INFO]  No HAL component base name specified on command line using: qtdragon (qtvcp:190)
[QTvcp.QTVCP.QT_MAKEGUI][INFO]  Qsettings file path: /home/alex/.config/QtVcp/qtdragon.conf (qt_makegui.py:98)
[QTvcp.QTVCP.QT_MAKEGUI][INFO]  Imported resources.py filed: /home/alex/linuxcnc/configs/remora_EC500_touch/qtvcp/screens/qtdragon/resources.py (qt_makegui.py:192)
[QTvcp.QTVCP.WIDGETS.DIALOG_WIDGET][WARNING]  Detected hal_manualtoolchange component already loaded
   Qtvcp recommends to allow use of it's own component by not loading the original. 
   Qtvcp Integrated toolchange dialog will not show until then (dialog_widget.py:382)
[QTvcp.QTDRAGON_HANDLER][INFO]  Using Basic Probe (qtdragon_handler.py:456)
[QTvcp.QTVCP.QT_MAKEGUI][INFO]  Handler Override file found at: /home/alex/linuxcnc/configs/remora_EC500_touch/pause_pin.py (qt_makegui.py:356)

User command file for pause pin found

[QTvcp][INFO]  Postgui filename: ['99_postgui_call_list.hal'] (qtvcp:427)
[QTvcp][INFO]  Postgui commands: None (qtvcp:439)
[QTvcp][INFO]  Preference path: ./qtdragon.pref (qtvcp:416)
Spike filter active[0][1]: -327
Spike filter active[0][2]: -327
Unexpected realtime delay on task 0 with period 1000000
This Message will only display once per session.
Run the Latency Test and resolve before continuing.
 on_abort executing
Unexpected realtime delay on task 0 with period 1000000
This Message will only display once per session.
Run the Latency Test and resolve before continuing.