LINUXCNC - 2.10.0-pre0-1919-g29db881ed
Machine configuration directory is '/home/alex/linuxcnc/configs/remora_EC500_touch_01'
Machine configuration file is 'remora-nvem.ini'
Starting LinuxCNC...
linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod num_dio=11
Note: Using POSIX realtime
Found file(REL): ./remora-nvem.hal
[QTvcp.QTVCP.WIDGETS.DIALOG_WIDGET][WARNING]  Detected hal_manualtoolchange component already loaded
   Qtvcp recommends to allow use of it's own component by not loading the original. 
   Qtvcp Integrated toolchange dialog will not show until then (dialog_widget.py:384)

User command file for pause pin found

Unexpected realtime delay on task 0 with period 1000000
This Message will only display once per session.
Run the Latency Test and resolve before continuing.
 on_abort executing
Unexpected realtime delay on task 0 with period 1000000
This Message will only display once per session.
Run the Latency Test and resolve before continuing.

task: main loop took 0.125138 seconds
 on_abort executing
 on_abort executing
task: main loop took 0.143207 seconds
 on_abort executing
task: main loop took 0.124486 seconds
Shutting down and cleaning up LinuxCNC...
task: 0 cycles, min=0.000010, max=0.143207, avg=-1.000000, 3 latency excursions (> 10x expected cycle time of 0.010000s)
Note: Using POSIX realtime