Print file information: RUN_IN_PLACE=no EMC2_DIR= EMC2_BIN_DIR=/usr/bin EMC2_TCL_DIR=/usr/share/emc/tcl EMC2_SCRIPT_DIR= EMC2_RTLIB_DIR=/usr/realtime-2.6.32-122-rtai/modules/emc2 EMC2_CONFIG_DIR= EMC2_LANG_DIR=/usr/share/emc/tcl/msgs INIVAR=inivar HALCMD=halcmd EMC2_EMCSH=/usr/bin/wish8.5 EMC2 - 2.4.3 Machine configuration directory is '/home/julian/emc2/configs/stepper' Machine configuration file is 'stepper_inch.ini' INIFILE=/home/julian/emc2/configs/stepper/stepper_inch.ini PARAMETER_FILE=stepper.var EMCMOT=motmod EMCIO=io TASK=milltask HALUI= DISPLAY=axis NML_FILE= Starting EMC2... Starting EMC2 server program: emcsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Realtime system did not load Shutting down and cleaning up EMC2... Killing task emcsvr, PID=1940 Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Cleanup done Debug file information: insmod: error inserting '/usr/realtime-2.6.32-122-rtai/modules/rtai_hal.ko': -1 Operation not permitted 1940 PID TTY STAT TIME COMMAND Stopping realtime threads RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded Unloading hal components RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded RTAPI: ERROR: could not open shared memory (errno=2) HAL: ERROR: rtapi init failed halcmd: hal_init() failed: -22 NOTE: 'rtapi' kernel module must be loaded ERROR: Module hal_lib does not exist in /proc/modules ERROR: Module rtapi does not exist in /proc/modules ERROR: Module rtai_math does not exist in /proc/modules ERROR: Module rtai_sem does not exist in /proc/modules ERROR: Module rtai_fifos does not exist in /proc/modules ERROR: Module rtai_sched does not exist in /proc/modules ERROR: Module rtai_hal does not exist in /proc/modules Kernel message information: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ffae000 (usable) [ 0.000000] BIOS-e820: 000000001ffae000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x1ffae max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 0FEDA0000 mask FFFFE0000 write-through [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001ffae000 (usable) [ 0.000000] modified: 000000001ffae000 - 0000000020000000 (reserved) [ 0.000000] modified: 00000000feda0000 - 00000000fee00000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001ffae000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001ffae000 page 4k [ 0.000000] kernel direct mapping tables up to 1ffae000 @ 7000-c000 [ 0.000000] RAMDISK: 17383000 - 18001d73 [ 0.000000] ACPI: RSDP 000fdf00 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 1fff0000 00028 (v01 DELL CPi R 27D5061E ASL 00000061) [ 0.000000] ACPI: FACP 1fff0400 00074 (v01 DELL CPi R 27D5061E ASL 00000061) [ 0.000000] ACPI: DSDT 1fff0c00 02E13 (v01 INT430 SYSFexxx 00001001 MSFT 0100000E) [ 0.000000] ACPI: FACS 1ffff800 00040 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1ffae000 [ 0.000000] low ram: 0 - 1ffae000 [ 0.000000] node 0 low ram: 00000000 - 1ffae000 [ 0.000000] node 0 bootmap 00008000 - 0000bff8 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001ffae000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000 - 00008b0db8] [ 0.000000] #4 [0017383000 - 0018001d73] RAMDISK ==> [0017383000 - 0018001d73] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [00008b1000 - 00008b41a4] BRK ==> [00008b1000 - 00008b41a4] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001ffae [ 0.000000] HighMem 0x0001ffae -> 0x0001ffae [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001ffae [ 0.000000] On node 0 totalpages: 130889 [ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125902 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:deda0000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @c1800000 s74936 r0 d23368 u4194304 [ 0.000000] pcpu-alloc: s74936 r0 d23368 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129865 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=23618b41-813f-4407-a72f-4a71c2000c0f ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2619800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 495368k/523960k available (4539k kernel code, 27868k reserved, 1928k data, 620k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe07ae000 - 0xff7fe000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdffae000 ( 511 MB) [ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB) [ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB) [ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] I-pipe 2.6-03: pipeline enabled. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1395.327 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2790.65 BogoMIPS (lpj=5581308) [ 0.004030] Security Framework initialized [ 0.004064] AppArmor: AppArmor initialized [ 0.004075] Mount-cache hash table entries: 512 [ 0.004244] Initializing cgroup subsys ns [ 0.004250] Initializing cgroup subsys cpuacct [ 0.004257] Initializing cgroup subsys memory [ 0.004270] Initializing cgroup subsys devices [ 0.004274] Initializing cgroup subsys freezer [ 0.004278] Initializing cgroup subsys net_cls [ 0.004307] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004312] CPU: L2 cache: 2048K [ 0.004318] mce: CPU supports 5 MCE banks [ 0.004336] Performance Events: [ 0.004339] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.004343] no hardware sampling interrupt available. [ 0.004346] p6 PMU driver. [ 0.004368] ... version: 0 [ 0.004371] ... bit width: 32 [ 0.004374] ... generic registers: 2 [ 0.004377] ... value mask: 00000000ffffffff [ 0.004380] ... max period: 000000007fffffff [ 0.004384] ... fixed-purpose events: 0 [ 0.004387] ... event mask: 0000000000000003 [ 0.004393] Checking 'hlt' instruction... OK. [ 0.021179] SMP alternatives: switching to UP code [ 0.028766] Freeing SMP alternatives: 31k freed [ 0.028781] ACPI: Core revision 20090903 [ 0.035263] ACPI: setting ELCR to 0200 (from 0800) [ 0.036009] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036015] ftrace: allocating 21003 entries in 42 pages [ 0.045938] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.045943] weird, boot CPU (#0) not listed by the BIOS. [ 0.045946] SMP motherboard not detected. [ 0.045949] Local APIC not detected. Using dummy APIC emulation. [ 0.045952] SMP disabled [ 0.046134] Brought up 1 CPUs [ 0.046138] Total of 1 processors activated (2790.65 BogoMIPS). [ 0.047634] CPU0 attaching NULL sched-domain. [ 0.047832] devtmpfs: initialized [ 0.048332] regulator: core version 0.5 [ 0.048399] NET: Registered protocol family 16 [ 0.048567] EISA bus registered [ 0.048577] ACPI: bus type pci registered [ 0.082348] PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=2 [ 0.082351] PCI: Using configuration type 1 for base access [ 0.083504] bio: create slab at 0 [ 0.084225] ACPI: EC: Look up EC in DSDT [ 0.096854] ACPI: Interpreter enabled [ 0.096857] ACPI: (supports S0 S5) [ 0.096873] ACPI: Using PIC for interrupt routing [ 0.118333] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.124390] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.124444] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.124572] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f] [ 0.124629] pci 0000:00:1d.1: reg 20 io port: [0xbf40-0xbf5f] [ 0.124686] pci 0000:00:1d.2: reg 20 io port: [0xbf20-0xbf3f] [ 0.124752] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4fffc00-0xf4ffffff] [ 0.124814] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.124821] pci 0000:00:1d.7: PME# disabled [ 0.124917] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.124922] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO [ 0.124949] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] [ 0.124957] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] [ 0.124966] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] [ 0.124975] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] [ 0.124983] pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf] [ 0.124992] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.125040] pci 0000:00:1f.5: reg 10 io port: [0xb800-0xb8ff] [ 0.125048] pci 0000:00:1f.5: reg 14 io port: [0xbc40-0xbc7f] [ 0.125057] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf4fff800-0xf4fff9ff] [ 0.125065] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf4fff400-0xf4fff4ff] [ 0.125098] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.125104] pci 0000:00:1f.5: PME# disabled [ 0.125137] pci 0000:00:1f.6: reg 10 io port: [0xb400-0xb4ff] [ 0.125146] pci 0000:00:1f.6: reg 14 io port: [0xb080-0xb0ff] [ 0.125187] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.125192] pci 0000:00:1f.6: PME# disabled [ 0.125233] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] [ 0.125241] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.125262] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x80000000-0x8001ffff] [ 0.125319] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.125324] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] [ 0.125330] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.125366] pci 0000:02:00.0: reg 10 32bit mmio: [0xfaffe000-0xfaffffff] [ 0.125411] pci 0000:02:00.0: supports D1 D2 [ 0.125415] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.125420] pci 0000:02:00.0: PME# disabled [ 0.125456] pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.125478] pci 0000:02:01.0: supports D1 D2 [ 0.125481] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.125487] pci 0000:02:01.0: PME# disabled [ 0.125524] pci 0000:02:01.1: reg 10 32bit mmio: [0xfaffd800-0xfaffdfff] [ 0.125533] pci 0000:02:01.1: reg 14 32bit mmio: [0xfaff8000-0xfaffbfff] [ 0.125577] pci 0000:02:01.1: supports D1 D2 [ 0.125580] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot [ 0.125586] pci 0000:02:01.1: PME# disabled [ 0.125630] pci 0000:02:03.0: reg 10 32bit mmio: [0xfaffc000-0xfaffcfff] [ 0.125679] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold [ 0.125685] pci 0000:02:03.0: PME# disabled [ 0.125727] pci 0000:00:1e.0: transparent bridge [ 0.125733] pci 0000:00:1e.0: bridge io port: [0xd000-0xefff] [ 0.125739] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6000000-0xfbffffff] [ 0.125771] pci_bus 0000:00: on NUMA node 0 [ 0.125778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.126124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.126204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.145177] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.145345] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 [ 0.145510] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) [ 0.145674] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) [ 0.145814] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.145987] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.146141] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.146148] vgaarb: loaded [ 0.146311] SCSI subsystem initialized [ 0.146365] libata version 3.00 loaded. [ 0.146459] usbcore: registered new interface driver usbfs [ 0.146477] usbcore: registered new interface driver hub [ 0.146514] usbcore: registered new device driver usb [ 0.146694] ACPI: WMI: Mapper loaded [ 0.146697] PCI: Using ACPI for IRQ routing [ 0.146866] NetLabel: Initializing [ 0.146870] NetLabel: domain hash size = 128 [ 0.146872] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.146891] NetLabel: unlabeled traffic allowed by default [ 0.146927] Switching to clocksource tsc [ 0.147937] AppArmor: AppArmor Filesystem Enabled [ 0.147937] pnp: PnP ACPI init [ 0.147937] ACPI: bus type pnp registered [ 0.158921] pnp 00:02: io resource (0x800-0x805) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.158927] pnp 00:02: io resource (0x808-0x80f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.159023] pnp 00:03: io resource (0x806-0x807) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.159029] pnp 00:03: io resource (0x810-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.159034] pnp 00:03: io resource (0x860-0x87f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.165837] pnp: PnP ACPI: found 11 devices [ 0.165840] ACPI: ACPI bus type pnp unregistered [ 0.165846] PnPBIOS: Disabled by ACPI PNP [ 0.165861] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 0.165866] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 0.165870] system 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 0.165875] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.165880] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved [ 0.165885] system 00:00: iomem range 0x1fff0000-0x1fffffff has been reserved [ 0.165890] system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved [ 0.165894] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.165904] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.165912] system 00:03: ioport range 0xf400-0xf4fe has been reserved [ 0.165917] system 00:03: ioport range 0x880-0x8bf has been reserved [ 0.165922] system 00:03: ioport range 0x8c0-0x8df has been reserved [ 0.165926] system 00:03: ioport range 0x8e0-0x8ff has been reserved [ 0.165936] system 00:08: ioport range 0x900-0x97f has been reserved [ 0.200653] pci 0000:01:00.0: BAR 6: no parent found for of device [0x80000000-0x8001ffff] [ 0.200680] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.200684] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.200690] pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff [ 0.200696] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xdfffffff [ 0.200708] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03 [ 0.200712] pci 0000:02:01.0: IO window: 0x00d000-0x00d0ff [ 0.200718] pci 0000:02:01.0: IO window: 0x00d400-0x00d4ff [ 0.200724] pci 0000:02:01.0: PREFETCH window: 0x20000000-0x23ffffff [ 0.200730] pci 0000:02:01.0: MEM window: 0x28000000-0x2bffffff [ 0.200736] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.200740] pci 0000:00:1e.0: IO window: 0xd000-0xefff [ 0.200747] pci 0000:00:1e.0: MEM window: 0xf6000000-0xfbffffff [ 0.200754] pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x23ffffff [ 0.200773] pci 0000:00:1e.0: setting latency timer to 64 [ 0.200783] pci 0000:02:01.0: enabling device (0000 -> 0003) [ 0.201026] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.201030] PCI: setting IRQ 11 as level-triggered [ 0.201036] pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.201046] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.201050] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.201054] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.201059] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff] [ 0.201063] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.201067] pci_bus 0000:02: resource 0 io: [0xd000-0xefff] [ 0.201071] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xfbffffff] [ 0.201076] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff] [ 0.201080] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.201084] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.201088] pci_bus 0000:03: resource 0 io: [0xd000-0xd0ff] [ 0.201092] pci_bus 0000:03: resource 1 io: [0xd400-0xd4ff] [ 0.201096] pci_bus 0000:03: resource 2 pref mem [0x20000000-0x23ffffff] [ 0.201101] pci_bus 0000:03: resource 3 mem: [0x28000000-0x2bffffff] [ 0.201142] NET: Registered protocol family 2 [ 0.201253] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.201602] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.201730] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.201846] TCP: Hash tables configured (established 16384 bind 16384) [ 0.201849] TCP reno registered [ 0.201934] NET: Registered protocol family 1 [ 0.202024] pci 0000:01:00.0: Boot video device [ 0.202184] Scanning for low memory corruption every 60 seconds [ 0.202314] audit: initializing netlink socket (disabled) [ 0.202332] type=2000 audit(1373002095.200:1): initialized [ 0.215003] Trying to unpack rootfs image as initramfs... [ 0.229337] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.237485] VFS: Disk quotas dquot_6.5.2 [ 0.237581] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.238462] fuse init (API version 7.13) [ 0.238594] msgmni has been set to 968 [ 0.238886] alg: No test for stdrng (krng) [ 0.238978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.238983] io scheduler noop registered [ 0.238986] io scheduler anticipatory registered [ 0.238989] io scheduler deadline registered [ 0.239046] io scheduler cfq registered (default) [ 0.239204] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.239237] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.239342] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.239816] ACPI: Lid Switch [LID] [ 0.239881] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.239888] ACPI: Power Button [PBTN] [ 0.239951] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.239955] ACPI: Sleep Button [SBTN] [ 0.241927] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.242638] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7 [ 0.242643] PCI: setting IRQ 7 as level-triggered [ 0.242650] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7 [ 0.242659] serial 0000:00:1f.6: PCI INT B disabled [ 0.244054] brd: module loaded [ 0.244756] loop: module loaded [ 0.244865] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.244977] ata_piix 0000:00:1f.1: version 2.13 [ 0.249513] isapnp: Scanning for PnP cards... [ 0.254982] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.255238] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.255244] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.255303] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.255401] scsi0 : ata_piix [ 0.261127] scsi1 : ata_piix [ 0.262350] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 [ 0.262355] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 [ 0.262906] Fixed MDIO Bus: probed [ 0.262958] PPP generic driver version 2.4.2 [ 0.263027] tun: Universal TUN/TAP device driver, 1.6 [ 0.263030] tun: (C) 1999-2004 Max Krasnyansky [ 0.263166] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.263424] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 0.263431] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 0.263453] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.263458] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.263502] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.263546] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.267438] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.311130] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00 [ 0.333370] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.333548] usb usb1: configuration #1 chosen from 1 choice [ 0.333593] hub 1-0:1.0: USB hub found [ 0.333607] hub 1-0:1.0: 6 ports detected [ 0.333701] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.333725] uhci_hcd: USB Universal Host Controller Interface driver [ 0.333796] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.333808] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.333814] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.333865] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.333896] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80 [ 0.334023] usb usb2: configuration #1 chosen from 1 choice [ 0.334061] hub 2-0:1.0: USB hub found [ 0.334071] hub 2-0:1.0: 2 ports detected [ 0.334127] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.334135] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.334139] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.334190] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.334213] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40 [ 0.334335] usb usb3: configuration #1 chosen from 1 choice [ 0.334372] hub 3-0:1.0: USB hub found [ 0.334382] hub 3-0:1.0: 2 ports detected [ 0.334717] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.334722] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.334730] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.334735] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.334788] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.334812] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20 [ 0.334941] usb usb4: configuration #1 chosen from 1 choice [ 0.334978] hub 4-0:1.0: USB hub found [ 0.334988] hub 4-0:1.0: 2 ports detected [ 0.335112] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.345896] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.345911] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.346111] mice: PS/2 mouse device common for all mice [ 0.346373] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.346393] rtc0: alarms up to one day, 114 bytes nvram [ 0.346575] device-mapper: uevent: version 1.0.3 [ 0.346748] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.347968] device-mapper: multipath: version 1.1.0 loaded [ 0.347973] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.348787] EISA: Probing bus 0 at eisa.0 [ 0.348815] EISA: Detected 0 cards. [ 0.348819] cpuidle: using governor ladder [ 0.348823] cpuidle: using governor menu [ 0.349430] TCP cubic registered [ 0.349662] NET: Registered protocol family 10 [ 0.350229] lo: Disabled Privacy Extensions [ 0.350626] NET: Registered protocol family 17 [ 0.350665] Using IPI No-Shortcut mode [ 0.350777] registered taskstats version 1 [ 0.351069] rtc_cmos 00:06: setting system clock to 2013-07-05 05:28:15 UTC (1373002095) [ 0.351075] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.351077] EDD information not available. [ 0.353405] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.505818] ata1.00: ATA-6: ST980815A, 3.ALE, max UDMA/100 [ 0.505824] ata1.00: 156301488 sectors, multi 8: LBA48 [ 0.521876] ata1.00: configured for UDMA/100 [ 0.529626] ata2.00: ATAPI: _NEC DVD+/-RW ND-6500A, 202C, max UDMA/33 [ 0.605413] ata2.00: configured for UDMA/33 [ 0.932892] isapnp: No Plug & Play device found [ 0.933145] scsi 0:0:0:0: Direct-Access ATA ST980815A n/a PQ: 0 ANSI: 5 [ 0.933401] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.933662] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 0.933739] sd 0:0:0:0: [sda] Write Protect is off [ 0.933743] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.933783] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.934003] sda: sda1 sda2 < [ 0.969102] scsi 1:0:0:0: CD-ROM _NEC DVD+-RW ND-6500A 202C PQ: 0 ANSI: 5 [ 0.971559] sda5 sda6 > [ 0.993164] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.093932] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.093940] Uniform CD-ROM driver Revision: 3.20 [ 1.094136] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.094245] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.100292] Freeing initrd memory: 12795k freed [ 1.120164] Freeing unused kernel memory: 620k freed [ 1.121091] Write protecting the kernel text: 4540k [ 1.121133] Write protecting the kernel read-only data: 1668k [ 1.144324] udev: starting version 151 [ 1.431561] Linux agpgart interface v0.103 [ 1.465744] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:1d/LNXVIDEO:00/input/input5 [ 1.465876] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.466053] agpgart-intel 0000:00:00.0: Intel 855PM Chipset [ 1.475619] b44 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 1.493545] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 [ 1.555437] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0 [ 1.555511] ohci1394 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.555864] b44.c:v2.0 [ 1.556438] [drm] Initialized drm 1.1.0 20060810 [ 1.580203] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:11:43:61:33:32 [ 1.610784] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[faffd800-faffdfff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.613400] nouveau 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.617168] [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5 [ 1.617445] [drm] nouveau 0000:01:00.0: Detected an NV30 generation card (0x034400b1) [ 1.617483] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 1.799394] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 1.799633] [drm] nouveau 0000:01:00.0: BMP BIOS found [ 1.799637] [drm] nouveau 0000:01:00.0: BMP version 5.40 [ 1.799642] [drm] nouveau 0000:01:00.0: Bios version 04.34.20.42 [ 1.799647] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 2.2 [ 1.799653] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01010300 000088b8 [ 1.799660] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 03000323 00000004 [ 1.799664] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01120312 00000010 [ 1.799668] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02030321 00000703 [ 1.799851] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode [ 1.799856] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEDDB [ 1.812042] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF04B [ 1.812057] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF191 [ 1.812121] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF34A [ 1.812128] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF367 [ 1.812136] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF384 [ 1.820055] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF514 [ 1.828231] [TTM] Zone kernel: Available graphics memory: 254566 kiB. [ 1.828248] [drm] nouveau 0000:01:00.0: 64 MiB VRAM [ 1.828313] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 1.828335] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 1.828377] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode [ 1.828404] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture) [ 1.830425] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [ 1.831155] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 1.831166] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [ 1.831175] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 1.888298] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 1.888500] [drm] nouveau 0000:01:00.0: Detected a LVDS connector [ 1.990655] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector [ 1.990786] [drm] nouveau 0000:01:00.0: Detected a TV connector [ 1.992749] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 1.992755] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on lvds encoder (output 1) [ 1.992762] [drm] nouveau 0000:01:00.0: Calling LVDS script 1: [ 1.992767] [drm] nouveau 0000:01:00.0: Calling LVDS script 6: [ 1.992771] [drm] nouveau 0000:01:00.0: 0xDE71: Parsing digital output script table [ 2.496027] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [ 2.496032] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 2.576135] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x49000, bo d783e200 [ 2.576270] fb0: nouveaufb frame buffer device [ 2.576273] registered panic notifier [ 2.576281] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 2.579717] vga16fb: initializing [ 2.579722] vga16fb: mapped to 0xc00a0000 [ 2.579726] vga16fb: not registering due to another framebuffer present [ 2.603350] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A [ 2.603355] [drm] nouveau 0000:01:00.0: Calling LVDS script 2: [ 2.603360] [drm] nouveau 0000:01:00.0: 0xDF52: Parsing digital output script table [ 2.640034] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on lvds encoder (output 1) [ 2.640038] [drm] nouveau 0000:01:00.0: Calling LVDS script 5: [ 2.640042] [drm] nouveau 0000:01:00.0: 0xDE5A: Parsing digital output script table [ 2.640052] [drm] nouveau 0000:01:00.0: Output LVDS-1 is running on CRTC 0 using output A [ 2.643213] Console: switching to colour frame buffer device 160x50 [ 2.880199] ieee1394: Host added: ID:BUS[0-00:1023] GUID[364fc0001ebea0c1] [ 3.015632] xor: automatically using best checksumming function: pIII_sse [ 3.032017] pIII_sse : 3728.000 MB/sec [ 3.032021] xor: using function: pIII_sse (3728.000 MB/sec) [ 3.037239] device-mapper: dm-raid45: initialized v0.2594b [ 3.190128] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 13.733285] udev: starting version 151 [ 13.761405] Adding 1490936k swap on /dev/sda6. Priority:-1 extents:1 across:1490936k [ 13.828178] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.830551] lp: driver loaded but no devices found [ 14.095155] intel_rng: FWH not detected [ 14.224870] lib80211: common routines for IEEE802.11 drivers [ 14.224876] lib80211_crypt: registered algorithm 'NULL' [ 14.361787] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 14.376105] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 14.376111] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 14.384095] dell-wmi: No known WMI GUID found [ 14.399053] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:0191] [ 14.399074] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI [ 14.399078] yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI [ 14.399085] yenta_cardbus 0000:02:01.0: TI: mfunc 0x012c1202, devctl 0x64 [ 14.443701] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 14.443706] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 14.580615] type=1505 audit(1373016509.728:2): operation="profile_load" pid=611 name="/sbin/dhclient3" [ 14.581481] type=1505 audit(1373016509.728:3): operation="profile_load" pid=611 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 14.581949] type=1505 audit(1373016509.728:4): operation="profile_load" pid=611 name="/usr/lib/connman/scripts/dhclient-script" [ 14.630110] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0478, PCI irq 11 [ 14.630117] yenta_cardbus 0000:02:01.0: Socket status: 30000086 [ 14.630124] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 14.630137] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff [ 14.630143] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xefff: clean. [ 14.630861] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff [ 14.630866] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff [ 14.635912] ipw2200 0000:02:03.0: PCI INT A -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7 [ 14.648761] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 14.648851] ipw2200 0000:02:03.0: firmware: requesting ipw2200-bss.fw [ 14.762969] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6 [ 14.782260] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7 [ 14.987049] ipw2200: Radio Frequency Kill Switch is On: [ 14.987053] Kill switch must be turned off for wireless networking to work. [ 15.016262] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7 [ 15.016313] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 15.019679] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 15.075099] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 15.076183] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 15.076642] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 15.076713] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 15.077279] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 15.137125] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.241629] type=1505 audit(1373016510.388:5): operation="profile_load" pid=823 name="/usr/share/gdm/guest-session/Xsession" [ 15.245720] type=1505 audit(1373016510.392:6): operation="profile_replace" pid=824 name="/sbin/dhclient3" [ 15.246586] type=1505 audit(1373016510.392:7): operation="profile_replace" pid=824 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.247063] type=1505 audit(1373016510.392:8): operation="profile_replace" pid=824 name="/usr/lib/connman/scripts/dhclient-script" [ 15.259258] type=1505 audit(1373016510.404:9): operation="profile_load" pid=825 name="/usr/bin/evince" [ 15.291865] type=1505 audit(1373016510.436:10): operation="profile_load" pid=825 name="/usr/bin/evince-previewer" [ 15.300368] type=1505 audit(1373016510.448:11): operation="profile_load" pid=825 name="/usr/bin/evince-thumbnailer" [ 15.662694] ppdev: user-space parallel port driver [ 15.848069] intel8x0_measure_ac97_clock: measured 55383 usecs (2668 samples) [ 15.848074] intel8x0: clocking to 48000 [ 15.866884] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 15.867673] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 296.023643] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 296.029409] SGI XFS Quota Management subsystem [ 296.060427] JFS: nTxBlock = 3977, nTxLock = 31820 [ 296.138361] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 296.174955] QNX4 filesystem 0.2.3 registered. [ 296.305354] Btrfs loaded [ 319.526466] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT AVAILABLE/ENABLED.