[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4-9-rtai-686-pae (Debian 3.4.55-4linuxcnc) () (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Debian 3.4.55-4linuxcnc [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable) [ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cff9e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff9e000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: MSI MS-7641/760GMA-P34(FX) (MS-7641) , BIOS V25.0 05/28/2013 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x017f8000-0x017fffff] [ 0.000000] RAMDISK: 3642a000 - 3720d000 [ 0.000000] ACPI: RSDP 000f8cf0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT cff90000 0003C (v01 7641MS A7641100 20130528 MSFT 00000097) [ 0.000000] ACPI: FACP cff90200 00084 (v01 7641MS A7641100 20130528 MSFT 00000097) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579) [ 0.000000] ACPI: DSDT cff90660 09C74 (v01 A7641 A7641100 00000100 INTL 20051117) [ 0.000000] ACPI: FACS cff9e000 00040 [ 0.000000] ACPI: APIC cff90390 0010C (v01 7641MS A7641100 20130528 MSFT 00000097) [ 0.000000] ACPI: MCFG cff904a0 0003C (v01 7641MS OEMMCFG 20130528 MSFT 00000097) [ 0.000000] ACPI: OEMB cff9e040 00072 (v01 7641MS A7641100 20130528 MSFT 00000097) [ 0.000000] ACPI: HPET cff9a660 00038 (v01 7641MS OEMHPET 20130528 MSFT 00000097) [ 0.000000] ACPI: SSDT cff9a6a0 00470 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2439MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000cff90 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cff90 [ 0.000000] On node 0 totalpages: 851743 [ 0.000000] free_area_init_node: node 0, pgdat c1498a00, node_mem_map f4a2a200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4880 pages used for memmap [ 0.000000] HighMem zone: 619650 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] 24 Processors exceeds NR_CPUS limit of 8 [ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2fe00000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 17 pages/cpu @f7763000 s48384 r0 d21248 u69632 [ 0.000000] pcpu-alloc: s48384 r0 d21248 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 845087 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-9-rtai-686-pae root=UUID=7ad752b8-688e-4470-9fac-8f78b489e6f0 ro initrd=/install/gtk/initrd.gz lapic quiet rootdelay=5 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 6814720 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000cff90) [ 0.000000] Memory: 3352192k/3407424k available (3495k kernel code, 54780k reserved, 1237k data, 416k init, 2498120k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc14a0000 - 0xc1508000 ( 416 kB) [ 0.000000] .data : 0xc1369d4a - 0xc149f480 (1237 kB) [ 0.000000] .text : 0xc1000000 - 0xc1369d4a (3495 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:744 16 [ 0.000000] CPU 0 irqstacks, hard=f3c06000 soft=f3c08000 [ 0.000000] Interrupt pipeline (release #3) [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 3399.809 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.61 BogoMIPS (lpj=13599236) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000038] Security Framework initialized [ 0.000041] AppArmor: AppArmor disabled by boot time parameter [ 0.000055] Mount-cache hash table entries: 512 [ 0.000189] Initializing cgroup subsys cpuacct [ 0.000190] Initializing cgroup subsys memory [ 0.000196] Initializing cgroup subsys devices [ 0.000197] Initializing cgroup subsys freezer [ 0.000198] Initializing cgroup subsys net_cls [ 0.000200] Initializing cgroup subsys blkio [ 0.000204] Initializing cgroup subsys perf_event [ 0.000222] CPU: Physical Processor ID: 0 [ 0.000223] CPU: Processor Core ID: 0 [ 0.000225] mce: CPU supports 6 MCE banks [ 0.000230] LVT offset 0 assigned for vector 0xf9 [ 0.000233] using AMD E400 aware idle routine [ 0.000281] ACPI: Core revision 20120320 [ 0.009357] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.009694] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.051297] CPU0: AMD Phenom(tm) II X2 B59 Processor stepping 03 [ 0.155724] Performance Events: AMD PMU driver. [ 0.155728] ... version: 0 [ 0.155729] ... bit width: 48 [ 0.155730] ... generic registers: 4 [ 0.155731] ... value mask: 0000ffffffffffff [ 0.155733] ... max period: 00007fffffffffff [ 0.155734] ... fixed-purpose events: 0 [ 0.155735] ... event mask: 000000000000000f [ 0.155761] System has AMD C1E enabled [ 0.155762] I-pipe: will not be able to use LAPIC as a tick device [ 0.155763] I-pipe: disable C1E power state in your BIOS [ 0.155770] Switch to broadcast mode on CPU0 [ 0.167800] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.179796] CPU 1 irqstacks, hard=f3c94000 soft=f3c96000 [ 0.179798] Booting Node 0, Processors #1 [ 0.190408] Initializing CPU#1 [ 0.192844] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.192848] Switch to broadcast mode on CPU1 [ 0.192872] Brought up 2 CPUs [ 0.192874] Total of 2 processors activated (13599.23 BogoMIPS). [ 0.195077] devtmpfs: initialized [ 0.195246] PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes) [ 0.195326] dummy: [ 0.195367] NET: Registered protocol family 16 [ 0.195423] node 0 link 0: io port [1000, ffffff] [ 0.195425] TOM: 00000000d0000000 aka 3328M [ 0.195427] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.195429] node 0 link 0: mmio [a0000, bffff] [ 0.195432] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff] [ 0.195435] node 0 link 0: mmio [f0000000, fe6fffff] [ 0.195436] node 0 link 0: mmio [fe700000, fe8fffff] [ 0.195438] node 0 link 0: mmio [fe900000, ffdfffff] [ 0.195440] TOM2: 0000000130000000 aka 4864M [ 0.195442] bus: [00, 1f] on node 0 link 0 [ 0.195443] bus: 00 index 0 [io 0x0000-0xffff] [ 0.195445] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.195446] bus: 00 index 2 [mem 0xd0000000-0xdfffffff] [ 0.195447] bus: 00 index 3 [mem 0xf0000000-0xffffffff] [ 0.195475] ACPI: bus type pci registered [ 0.195520] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.195522] PCI: not using MMCONFIG [ 0.196196] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.196197] PCI: Using configuration type 1 for base access [ 0.196198] PCI: Using configuration type 1 for extended access [ 0.196616] bio: create slab at 0 [ 0.196697] ACPI: Added _OSI(Module Device) [ 0.196700] ACPI: Added _OSI(Processor Device) [ 0.196702] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.196704] ACPI: Added _OSI(Processor Aggregator Device) [ 0.197479] ACPI: EC: Look up EC in DSDT [ 0.198569] ACPI: Executed 4 blocks of module-level executable AML code [ 0.201429] ACPI: Interpreter enabled [ 0.201432] ACPI: (supports S0 S1 S4 S5) [ 0.201448] ACPI: Using IOAPIC for interrupt routing [ 0.201466] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.202002] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.202004] PCI: Using MMCONFIG for extended config space [ 0.207205] ACPI: No dock devices found. [ 0.207209] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.207270] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.207366] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.207368] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.207370] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.207372] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.207374] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff] [ 0.207376] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.207400] PCI host bridge to bus 0000:00 [ 0.207402] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.207403] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.207405] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.207407] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.207409] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff] [ 0.207411] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.207421] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 [ 0.207458] pci 0000:00:01.0: [1022:9602] type 01 class 0x060400 [ 0.207492] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400 [ 0.207514] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.207527] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400 [ 0.207549] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.207561] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400 [ 0.207583] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.207614] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f [ 0.207632] pci 0000:00:11.0: reg 10: [io 0xa000-0xa007] [ 0.207642] pci 0000:00:11.0: reg 14: [io 0x9000-0x9003] [ 0.207650] pci 0000:00:11.0: reg 18: [io 0x8000-0x8007] [ 0.207659] pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003] [ 0.207668] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f] [ 0.207677] pci 0000:00:11.0: reg 24: [mem 0xfe6ffc00-0xfe6fffff] [ 0.207696] pci 0000:00:11.0: set SATA to AHCI mode [ 0.207726] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.207739] pci 0000:00:12.0: reg 10: [mem 0xfe6fe000-0xfe6fefff] [ 0.207803] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.207815] pci 0000:00:12.1: reg 10: [mem 0xfe6fd000-0xfe6fdfff] [ 0.207878] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.207896] pci 0000:00:12.2: reg 10: [mem 0xfe6ff800-0xfe6ff8ff] [ 0.207960] pci 0000:00:12.2: supports D1 D2 [ 0.207962] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.207983] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.207996] pci 0000:00:13.0: reg 10: [mem 0xfe6fc000-0xfe6fcfff] [ 0.208053] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.208065] pci 0000:00:13.1: reg 10: [mem 0xfe6fb000-0xfe6fbfff] [ 0.208128] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.208146] pci 0000:00:13.2: reg 10: [mem 0xfe6ff400-0xfe6ff4ff] [ 0.208210] pci 0000:00:13.2: supports D1 D2 [ 0.208212] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.208236] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.208321] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.208336] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.208345] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.208353] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.208362] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.208371] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.208415] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.208435] pci 0000:00:14.2: reg 10: [mem 0xfe6f4000-0xfe6f7fff 64bit] [ 0.208489] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.208502] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.208571] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.208608] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.208620] pci 0000:00:14.5: reg 10: [mem 0xfe6fa000-0xfe6fafff] [ 0.208680] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 [ 0.208694] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 [ 0.208706] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 [ 0.208718] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 [ 0.208731] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 [ 0.208769] pci 0000:01:05.0: [1002:9616] type 00 class 0x030000 [ 0.208777] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.208781] pci 0000:01:05.0: reg 14: [io 0xb000-0xb0ff] [ 0.208785] pci 0000:01:05.0: reg 18: [mem 0xfe8e0000-0xfe8effff] [ 0.208794] pci 0000:01:05.0: reg 24: [mem 0xfe700000-0xfe7fffff] [ 0.208806] pci 0000:01:05.0: supports D1 D2 [ 0.208848] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.208851] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.208853] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff] [ 0.208856] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.208888] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.208900] pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff] [ 0.208920] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] [ 0.208933] pci 0000:02:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref] [ 0.208966] pci 0000:02:00.0: supports D1 D2 [ 0.208968] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.215775] pci 0000:00:05.0: PCI bridge to [bus 02-02] [ 0.215779] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 0.215784] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.215822] pci 0000:03:00.0: [1912:0014] type 00 class 0x0c0330 [ 0.215839] pci 0000:03:00.0: reg 10: [mem 0xfe9fe000-0xfe9fffff 64bit] [ 0.215900] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.224362] pci 0000:00:06.0: PCI bridge to [bus 03-03] [ 0.224367] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.224401] pci 0000:04:00.0: [1b21:0611] type 00 class 0x010185 [ 0.224412] pci 0000:04:00.0: reg 10: [io 0xe800-0xe807] [ 0.224420] pci 0000:04:00.0: reg 14: [io 0xe400-0xe403] [ 0.224427] pci 0000:04:00.0: reg 18: [io 0xe000-0xe007] [ 0.224434] pci 0000:04:00.0: reg 1c: [io 0xd800-0xd803] [ 0.224442] pci 0000:04:00.0: reg 20: [io 0xd400-0xd40f] [ 0.224449] pci 0000:04:00.0: reg 24: [mem 0xfeaffc00-0xfeaffdff] [ 0.231763] pci 0000:00:07.0: PCI bridge to [bus 04-04] [ 0.231767] pci 0000:00:07.0: bridge window [io 0xd000-0xefff] [ 0.231769] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.231795] pci 0000:05:02.0: [2718:5125] type 00 class 0x110000 [ 0.231811] pci 0000:05:02.0: reg 10: [mem 0xfebf0000-0xfebfffff] [ 0.231923] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode) [ 0.231929] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.231933] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.231935] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.231937] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.231939] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.231940] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) [ 0.231942] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.231955] pci_bus 0000:00: on NUMA node 0 [ 0.231958] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.232134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.232167] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT] [ 0.232190] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.232211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 0.232248] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.232287] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f) [ 0.236739] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15) [ 0.236771] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *11 12 14 15) [ 0.236800] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.236828] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 12 14 15) [ 0.236856] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15) [ 0.236884] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.236912] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15) [ 0.236940] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.237011] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.237014] vgaarb: loaded [ 0.237015] vgaarb: bridge control possible 0000:01:05.0 [ 0.237035] PCI: Using ACPI for IRQ routing [ 0.237037] PCI: pci_cache_line_size set to 64 bytes [ 0.237112] reserve RAM buffer: 000000000009f400 - 000000000009ffff [ 0.237114] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff [ 0.237201] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.237205] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.239239] Switching to clocksource hpet [ 0.239289] pnp: PnP ACPI init [ 0.239296] ACPI: bus type pnp registered [ 0.239357] pnp 00:00: [bus 00-ff] [ 0.239359] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.239361] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.239363] pnp 00:00: [io 0x0d00-0xffff window] [ 0.239365] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.239366] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.239368] pnp 00:00: [mem 0xd0000000-0xdfffffff window] [ 0.239370] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.239401] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.239456] pnp 00:01: [mem 0x00000000-0xffffffff disabled] [ 0.239458] pnp 00:01: [mem 0x00000000-0xffffffff disabled] [ 0.239490] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.239527] pnp 00:02: [dma 4] [ 0.239528] pnp 00:02: [io 0x0000-0x000f] [ 0.239530] pnp 00:02: [io 0x0081-0x0083] [ 0.239531] pnp 00:02: [io 0x0087] [ 0.239533] pnp 00:02: [io 0x0089-0x008b] [ 0.239534] pnp 00:02: [io 0x008f] [ 0.239535] pnp 00:02: [io 0x00c0-0x00df] [ 0.239559] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.239567] pnp 00:03: [io 0x0070-0x0071] [ 0.239577] pnp 00:03: [irq 8] [ 0.239599] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.239605] pnp 00:04: [io 0x0061] [ 0.239626] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.239632] pnp 00:05: [io 0x00f0-0x00ff] [ 0.239639] pnp 00:05: [irq 13] [ 0.239662] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.239856] pnp 00:06: [io 0x03f8-0x03ff] [ 0.239860] pnp 00:06: [irq 4] [ 0.239862] pnp 00:06: [dma 0 disabled] [ 0.239909] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.239928] pnp 00:07: [mem 0xfed00000-0xfed003ff] [ 0.239950] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.240004] pnp 00:08: [mem 0xfec00000-0xfec00fff] [ 0.240006] pnp 00:08: [mem 0xfee00000-0xfee00fff] [ 0.240043] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.240045] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.240047] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.240138] pnp 00:09: [io 0x0010-0x001f] [ 0.240140] pnp 00:09: [io 0x0022-0x003f] [ 0.240141] pnp 00:09: [io 0x0062-0x0063] [ 0.240142] pnp 00:09: [io 0x0065-0x006f] [ 0.240144] pnp 00:09: [io 0x0072-0x007f] [ 0.240145] pnp 00:09: [io 0x0080] [ 0.240147] pnp 00:09: [io 0x0084-0x0086] [ 0.240148] pnp 00:09: [io 0x0088] [ 0.240149] pnp 00:09: [io 0x008c-0x008e] [ 0.240151] pnp 00:09: [io 0x0090-0x009f] [ 0.240152] pnp 00:09: [io 0x00a2-0x00bf] [ 0.240153] pnp 00:09: [io 0x00b1] [ 0.240155] pnp 00:09: [io 0x00e0-0x00ef] [ 0.240156] pnp 00:09: [io 0x04d0-0x04d1] [ 0.240157] pnp 00:09: [io 0x040b] [ 0.240159] pnp 00:09: [io 0x04d6] [ 0.240160] pnp 00:09: [io 0x0c00-0x0c01] [ 0.240161] pnp 00:09: [io 0x0c14] [ 0.240163] pnp 00:09: [io 0x0c50-0x0c51] [ 0.240164] pnp 00:09: [io 0x0c52] [ 0.240165] pnp 00:09: [io 0x0c6c] [ 0.240167] pnp 00:09: [io 0x0c6f] [ 0.240168] pnp 00:09: [io 0x0cd0-0x0cd1] [ 0.240169] pnp 00:09: [io 0x0cd2-0x0cd3] [ 0.240171] pnp 00:09: [io 0x0cd4-0x0cd5] [ 0.240172] pnp 00:09: [io 0x0cd6-0x0cd7] [ 0.240173] pnp 00:09: [io 0x0cd8-0x0cdf] [ 0.240175] pnp 00:09: [io 0x0800-0x089f] [ 0.240176] pnp 00:09: [io 0x0000-0xffffffff disabled] [ 0.240178] pnp 00:09: [io 0x0b00-0x0b0f] [ 0.240179] pnp 00:09: [io 0x0b20-0x0b3f] [ 0.240181] pnp 00:09: [io 0x0900-0x090f] [ 0.240182] pnp 00:09: [io 0x0910-0x091f] [ 0.240183] pnp 00:09: [io 0xfe00-0xfefe] [ 0.240185] pnp 00:09: [io 0x0060-0x005f disabled] [ 0.240186] pnp 00:09: [io 0x0064-0x0063 disabled] [ 0.240188] pnp 00:09: [mem 0xffb80000-0xffbfffff] [ 0.240189] pnp 00:09: [mem 0xfec10000-0xfec1001f] [ 0.240258] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.240259] system 00:09: [io 0x040b] has been reserved [ 0.240261] system 00:09: [io 0x04d6] has been reserved [ 0.240263] system 00:09: [io 0x0c00-0x0c01] has been reserved [ 0.240265] system 00:09: [io 0x0c14] has been reserved [ 0.240267] system 00:09: [io 0x0c50-0x0c51] has been reserved [ 0.240268] system 00:09: [io 0x0c52] has been reserved [ 0.240270] system 00:09: [io 0x0c6c] has been reserved [ 0.240272] system 00:09: [io 0x0c6f] has been reserved [ 0.240274] system 00:09: [io 0x0cd0-0x0cd1] has been reserved [ 0.240275] system 00:09: [io 0x0cd2-0x0cd3] has been reserved [ 0.240277] system 00:09: [io 0x0cd4-0x0cd5] has been reserved [ 0.240279] system 00:09: [io 0x0cd6-0x0cd7] has been reserved [ 0.240281] system 00:09: [io 0x0cd8-0x0cdf] has been reserved [ 0.240283] system 00:09: [io 0x0800-0x089f] has been reserved [ 0.240285] system 00:09: [io 0x0b00-0x0b0f] has been reserved [ 0.240286] system 00:09: [io 0x0b20-0x0b3f] has been reserved [ 0.240288] system 00:09: [io 0x0900-0x090f] has been reserved [ 0.240290] system 00:09: [io 0x0910-0x091f] has been reserved [ 0.240292] system 00:09: [io 0xfe00-0xfefe] has been reserved [ 0.240294] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.240296] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.240298] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.240315] pnp 00:0a: [io 0x0060] [ 0.240317] pnp 00:0a: [io 0x0064] [ 0.240320] pnp 00:0a: [irq 1] [ 0.240351] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.240384] pnp 00:0b: [irq 12] [ 0.240411] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.240468] pnp 00:0c: [io 0x0000-0xffffffff disabled] [ 0.240470] pnp 00:0c: [io 0x0e80-0x0f5f] [ 0.240472] pnp 00:0c: [io 0x0ae0-0x0aef] [ 0.240508] system 00:0c: [io 0x0e80-0x0f5f] has been reserved [ 0.240510] system 00:0c: [io 0x0ae0-0x0aef] has been reserved [ 0.240512] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.240541] pnp 00:0d: [mem 0xe0000000-0xefffffff] [ 0.240578] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 0.240581] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.240945] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 0.240946] pnp 00:0e: [mem 0x000c0000-0x000cffff] [ 0.240948] pnp 00:0e: [mem 0x000e0000-0x000fffff] [ 0.240950] pnp 00:0e: [mem 0x00100000-0xcfffffff] [ 0.240951] pnp 00:0e: [mem 0xfec00000-0xffffffff] [ 0.240994] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.240997] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.240999] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.241001] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.241003] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.241005] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.241083] pnp: PnP ACPI: found 15 devices [ 0.241084] ACPI: ACPI bus type pnp unregistered [ 0.241086] PnPBIOS: Disabled by ACPI PNP [ 0.277914] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.277916] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.277919] pci 0000:00:01.0: bridge window [mem 0xfe700000-0xfe8fffff] [ 0.277921] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.277924] pci 0000:00:05.0: PCI bridge to [bus 02-02] [ 0.277926] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 0.277930] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.277933] pci 0000:00:06.0: PCI bridge to [bus 03-03] [ 0.277935] pci 0000:00:06.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.277939] pci 0000:00:07.0: PCI bridge to [bus 04-04] [ 0.277941] pci 0000:00:07.0: bridge window [io 0xd000-0xefff] [ 0.277943] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.277947] pci 0000:00:14.4: PCI bridge to [bus 05-05] [ 0.277951] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.277983] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.277985] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.277987] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.277988] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.277990] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff] [ 0.277992] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.277993] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.277995] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe8fffff] [ 0.277997] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.277999] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.278000] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.278002] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.278004] pci_bus 0000:04: resource 0 [io 0xd000-0xefff] [ 0.278005] pci_bus 0000:04: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.278007] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.278009] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.278010] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.278012] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.278014] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff] [ 0.278015] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xdfffffff] [ 0.278017] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.278078] NET: Registered protocol family 2 [ 0.278122] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.278246] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.278557] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.278715] TCP: Hash tables configured (established 131072 bind 65536) [ 0.278717] TCP: reno registered [ 0.278719] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.278724] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.278794] NET: Registered protocol family 1 [ 1.730437] pci 0000:01:05.0: Boot video device [ 1.730483] PCI: CLS 64 bytes, default 64 [ 1.730513] Unpacking initramfs... [ 1.936739] Freeing initrd memory: 14220k freed [ 1.941715] LVT offset 1 assigned for vector 0x400 [ 1.941727] IBS: LVT offset 1 assigned [ 1.941738] perf: AMD IBS detected (0x0000001f) [ 1.941891] audit: initializing netlink socket (disabled) [ 1.941903] type=2000 audit(1427917012.824:1): initialized [ 1.950171] highmem bounce pool size: 64 pages [ 1.950174] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.950414] VFS: Disk quotas dquot_6.5.2 [ 1.950435] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.950495] msgmni has been set to 1695 [ 1.950645] alg: No test for stdrng (krng) [ 1.950669] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.950672] io scheduler noop registered [ 1.950673] io scheduler deadline registered [ 1.950689] io scheduler cfq registered (default) [ 1.950848] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.950859] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.950861] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.951119] GHES: HEST is not enabled! [ 1.951133] isapnp: Scanning for PnP cards... [ 2.307521] isapnp: No Plug & Play device found [ 2.307577] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.327980] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.348635] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.348847] Linux agpgart interface v0.103 [ 2.349125] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 2.349496] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.349521] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.349617] mousedev: PS/2 mouse device common for all mice [ 2.349651] rtc_cmos 00:03: RTC can wake from S4 [ 2.349760] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.349782] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.349863] TCP: cubic registered [ 2.349914] NET: Registered protocol family 10 [ 2.350068] Mobile IPv6 [ 2.350070] NET: Registered protocol family 17 [ 2.350073] Registering the dns_resolver key type [ 2.350098] Using IPI No-Shortcut mode [ 2.350204] PM: Hibernation image not present or could not be loaded. [ 2.350214] registered taskstats version 1 [ 2.350572] rtc_cmos 00:03: setting system clock to 2015-04-01 19:36:54 UTC (1427917014) [ 2.350645] Freeing unused kernel memory: 416k freed [ 2.350826] Write protecting the kernel text: 3496k [ 2.350842] Write protecting the kernel read-only data: 984k [ 2.358700] udevd[49]: starting version 175 [ 2.368322] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.379559] usbcore: registered new interface driver usbfs [ 2.379578] usbcore: registered new interface driver hub [ 2.383112] usbcore: registered new device driver usb [ 2.387124] SCSI subsystem initialized [ 2.389654] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.389706] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 2.389727] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.389736] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.389761] ehci_hcd 0000:00:12.2: debug port 1 [ 2.389785] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe6ff800 [ 2.394667] microcode: CPU0: patch_level=0x010000c8 [ 2.398056] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.398078] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.398080] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.398082] usb usb1: Product: EHCI Host Controller [ 2.398084] usb usb1: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 2.398086] usb usb1: SerialNumber: 0000:00:12.2 [ 2.398168] hub 1-0:1.0: USB hub found [ 2.398171] hub 1-0:1.0: 6 ports detected [ 2.398285] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 2.398292] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.398299] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.398322] ehci_hcd 0000:00:13.2: debug port 1 [ 2.398346] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe6ff400 [ 2.402320] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.405262] libata version 3.00 loaded. [ 2.410079] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.410099] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.410101] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.410103] usb usb2: Product: EHCI Host Controller [ 2.410105] usb usb2: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 2.410106] usb usb2: SerialNumber: 0000:00:13.2 [ 2.410184] hub 2-0:1.0: USB hub found [ 2.410188] hub 2-0:1.0: 6 ports detected [ 2.410476] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 2.410483] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 2.410509] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe6fe000 [ 2.411568] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.411752] r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xf8046000, d8:cb:8a:33:11:8c, XID 0c900800 IRQ 17 [ 2.411754] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.415787] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.415795] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 2.422592] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.422595] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.422597] usb usb4: Product: xHCI Host Controller [ 2.422599] usb usb4: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd [ 2.422601] usb usb4: SerialNumber: 0000:03:00.0 [ 2.422918] xHCI xhci_add_endpoint called for root hub [ 2.422920] xHCI xhci_check_bandwidth called for root hub [ 2.422943] hub 4-0:1.0: USB hub found [ 2.422949] hub 4-0:1.0: 4 ports detected [ 2.423010] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.423015] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5 [ 2.424736] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.424738] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.424739] usb usb5: Product: xHCI Host Controller [ 2.424741] usb usb5: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd [ 2.424742] usb usb5: SerialNumber: 0000:03:00.0 [ 2.431214] xHCI xhci_add_endpoint called for root hub [ 2.431216] xHCI xhci_check_bandwidth called for root hub [ 2.431238] hub 5-0:1.0: USB hub found [ 2.431245] hub 5-0:1.0: 4 ports detected [ 2.435840] microcode: CPU1: patch_level=0x010000c8 [ 2.437681] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 2.469990] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.469992] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.469994] usb usb3: Product: OHCI Host Controller [ 2.469996] usb usb3: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 2.469997] usb usb3: SerialNumber: 0000:00:12.0 [ 2.470096] hub 3-0:1.0: USB hub found [ 2.470101] hub 3-0:1.0: 3 ports detected [ 2.470510] ahci 0000:00:11.0: version 3.0 [ 2.470610] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.470613] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.471033] scsi0 : ahci [ 2.471106] scsi1 : ahci [ 2.471153] scsi2 : ahci [ 2.471197] scsi3 : ahci [ 2.471295] ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 22 [ 2.471298] ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 22 [ 2.471301] ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 22 [ 2.471304] ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 22 [ 2.471368] ahci: SSS flag set, parallel bus scan disabled [ 2.471380] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 2.471400] ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl IDE mode [ 2.471402] ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 2.471735] scsi5 : ahci [ 2.471851] scsi6 : ahci [ 2.471884] ata7: SATA max UDMA/133 abar m512@0xfeaffc00 port 0xfeaffd00 irq 19 [ 2.471887] ata8: SATA max UDMA/133 abar m512@0xfeaffc00 port 0xfeaffd80 irq 19 [ 2.471895] scsi4 : pata_atiixp [ 2.472136] scsi7 : pata_atiixp [ 2.472647] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.472649] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.472932] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 2.472942] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 6 [ 2.472967] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe6fd000 [ 2.529973] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.529976] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.529978] usb usb6: Product: OHCI Host Controller [ 2.529979] usb usb6: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 2.529981] usb usb6: SerialNumber: 0000:00:12.1 [ 2.530070] hub 6-0:1.0: USB hub found [ 2.530075] hub 6-0:1.0: 3 ports detected [ 2.530137] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.530142] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7 [ 2.530156] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe6fc000 [ 2.589932] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.589935] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.589936] usb usb7: Product: OHCI Host Controller [ 2.589938] usb usb7: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 2.589939] usb usb7: SerialNumber: 0000:00:13.0 [ 2.590027] hub 7-0:1.0: USB hub found [ 2.590032] hub 7-0:1.0: 3 ports detected [ 2.590096] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 2.590101] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 8 [ 2.590114] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe6fb000 [ 2.649893] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.649895] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.649897] usb usb8: Product: OHCI Host Controller [ 2.649898] usb usb8: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 2.649900] usb usb8: SerialNumber: 0000:00:13.1 [ 2.649986] hub 8-0:1.0: USB hub found [ 2.649993] hub 8-0:1.0: 3 ports detected [ 2.650404] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.650410] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 9 [ 2.650423] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe6fa000 [ 2.709879] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.709882] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.709884] usb usb9: Product: OHCI Host Controller [ 2.709885] usb usb9: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 2.709887] usb usb9: SerialNumber: 0000:00:14.5 [ 2.709977] hub 9-0:1.0: USB hub found [ 2.709982] hub 9-0:1.0: 2 ports detected [ 2.789825] ata7: SATA link down (SStatus 0 SControl 300) [ 2.789833] ata2: SATA link down (SStatus 0 SControl 300) [ 2.789860] ata3: SATA link down (SStatus 0 SControl 300) [ 2.789905] ata4: SATA link down (SStatus 0 SControl 300) [ 2.937737] Refined TSC clocksource calibration: 3400.014 MHz. [ 2.937741] Switching to clocksource tsc [ 2.961708] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.961861] ata1.00: ATA-9: KingFast, 1.093.29, max UDMA/100 [ 2.961864] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 2.962041] ata1.00: configured for UDMA/100 [ 2.962134] scsi 0:0:0:0: Direct-Access ATA KingFast 1.09 PQ: 0 ANSI: 5 [ 3.281520] ata8: SATA link down (SStatus 0 SControl 300) [ 3.285159] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 3.285200] sd 0:0:0:0: [sda] Write Protect is off [ 3.285202] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.285216] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.285920] sda: sda1 sda2 < sda5 > [ 3.286160] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.287169] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.362270] PM: Starting manual resume from disk [ 8.362272] PM: Hibernation image partition 8:5 present [ 8.362274] PM: Looking for hibernation image. [ 8.362459] PM: Image not found (code -22) [ 8.362462] PM: Hibernation image not present or could not be loaded. [ 8.371540] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 8.530898] udevd[404]: starting version 175 [ 8.588901] wmi: Mapper loaded [ 8.594862] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.596548] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 8.596555] ACPI: Power Button [PWRB] [ 8.596594] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 8.596596] ACPI: Power Button [PWRF] [ 8.606054] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251) [ 8.606061] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.607261] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01 [ 8.607318] sp5100_tco: mmio address 0xfec000f0 already in use [ 8.610576] [drm] Initialized drm 1.1.0 20060810 [ 8.629810] [drm] radeon kernel modesetting enabled. [ 8.635214] radeon 0000:01:05.0: setting latency timer to 64 [ 8.635220] [drm] initializing kernel modesetting (RS780 0x1002:0x9616 0x1462:0x7641). [ 8.635239] [drm] register mmio base: 0xFE8E0000 [ 8.635241] [drm] register mmio size: 65536 [ 8.636358] ATOM BIOS: B43106 [ 8.636374] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used) [ 8.636376] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 8.645776] [drm] Detected VRAM RAM=256M, BAR=256M [ 8.645779] [drm] RAM width 32bits DDR [ 8.648221] [TTM] Zone kernel: Available graphics memory: 434354 kiB [ 8.648223] [TTM] Zone highmem: Available graphics memory: 1683414 kiB [ 8.648225] [TTM] Initializing pool allocator [ 8.648242] [drm] radeon: 256M of VRAM memory ready [ 8.648244] [drm] radeon: 512M of GTT memory ready. [ 8.648256] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 8.648581] [drm] radeon: ib pool ready. [ 8.648641] [drm] Loading RS780 Microcode [ 8.678217] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). [ 8.678279] radeon 0000:01:05.0: WB enabled [ 8.678281] [drm] fence driver on ring 0 use gpu addr 0xa0000c00 and cpu addr 0xff98ec00 [ 8.678284] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 8.678286] [drm] Driver supports precise vblank timestamp query. [ 8.678301] [drm] radeon: irq initialized. [ 8.710140] [drm] ring test on 0 succeeded in 1 usecs [ 8.710255] [drm] ib test on ring 0 succeeded in 0 usecs [ 8.710596] [drm] Radeon Display Connectors [ 8.710599] [drm] Connector 0: [ 8.710600] [drm] VGA [ 8.710602] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 8.710604] [drm] Encoders: [ 8.710605] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 8.710606] [drm] Connector 1: [ 8.710607] [drm] HDMI-A [ 8.710608] [drm] HPD3 [ 8.710610] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 8.710611] [drm] Encoders: [ 8.710612] [drm] DFP3: INTERNAL_KLDSCP_LVTMA [ 8.710643] [drm] radeon: power management initialized [ 8.720224] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input3 [ 8.720340] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 8.720406] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 8.720470] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 8.720534] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 8.764105] [drm] fb mappable at 0xD0142000 [ 8.764107] [drm] vram apper at 0xD0000000 [ 8.764109] [drm] size 5242880 [ 8.764110] [drm] fb depth is 24 [ 8.764111] [drm] pitch is 5120 [ 8.764164] fbcon: radeondrmfb (fb0) is primary device [ 8.928603] Console: switching to colour frame buffer device 160x64 [ 8.938716] fb0: radeondrmfb frame buffer device [ 8.938718] drm: registered panic notifier [ 8.938722] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:05.0 on minor 0 [ 9.108665] Adding 2421756k swap on /dev/sda5. Priority:-1 extents:1 across:2421756k SS [ 9.117076] EXT4-fs (sda1): re-mounted. Opts: (null) [ 9.147558] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 9.171235] loop: module loaded [ 9.327262] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input8 [ 9.563257] RPC: Registered named UNIX socket transport module. [ 9.563260] RPC: Registered udp transport module. [ 9.563261] RPC: Registered tcp transport module. [ 9.563262] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.567070] FS-Cache: Loaded [ 9.571635] NFS: Registering the id_resolver key type [ 9.571646] FS-Cache: Netfs 'nfs' registered for caching [ 9.574806] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 10.078654] Bluetooth: Core ver 2.16 [ 10.078667] NET: Registered protocol family 31 [ 10.078668] Bluetooth: HCI device and connection manager initialized [ 10.078671] Bluetooth: HCI socket layer initialized [ 10.078672] Bluetooth: L2CAP socket layer initialized [ 10.078676] Bluetooth: SCO socket layer initialized [ 10.086863] Bluetooth: RFCOMM TTY layer initialized [ 10.086866] Bluetooth: RFCOMM socket layer initialized [ 10.086868] Bluetooth: RFCOMM ver 1.11 [ 10.104331] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.104334] Bluetooth: BNEP filters: protocol multicast [ 10.118530] lp: driver loaded but no devices found [ 10.130133] ppdev: user-space parallel port driver [ 10.330522] r8169 0000:02:00.0: eth0: link down [ 10.330542] r8169 0000:02:00.0: eth0: link down [ 10.330656] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.918883] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9 [ 11.929411] r8169 0000:02:00.0: eth0: link up [ 11.929493] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.826128] eth0: no IPv6 routers present [ 31.183940] I-pipe: head domain RTAI registered. [ 31.183944] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 31.183975] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 31.183978] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499148, CLK_FREQ 3399809000, CPU_FREQ 3399809000 [ 31.183980] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 31.183982] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499148, 12499148, 6442250 [ 31.195156] RTAI[malloc]: global heap size = 2097152 bytes, . [ 31.195178] , , kstacks pool size = 524288 bytes. [ 31.195181] RTAI[sched]: hard timer type/freq = APIC/12499148(Hz); default timing: oneshot; linear timed lists. [ 31.195183] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399809000 hz. [ 31.195185] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 31.204311] RTAI[math]: loaded. [ 31.261997] hm2: loading Mesa HostMot2 driver version 0.15 [ 31.264091] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 31.264132] hm2_pci: discovered 5i25 at 0000:05:02.0 [ 31.264578] hm2/hm2_5i25.0: Smart Serial Firmware Version 38 [ 31.320407] hm2/hm2_5i25.0: 34 I/O Pins used: [ 31.320409] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 31.320411] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 31.320413] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 31.320415] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 31.320416] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 31.320418] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 31.320420] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 31.320422] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 31.320423] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 31.320425] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 31.320427] hm2/hm2_5i25.0: IO Pin 010 (P3-07): IOPort [ 31.320428] hm2/hm2_5i25.0: IO Pin 011 (P3-08): IOPort [ 31.320430] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 31.320431] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 31.320433] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) [ 31.320435] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) [ 31.320436] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) [ 31.320438] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 31.320439] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 31.320441] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 31.320442] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 31.320444] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 31.320445] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 31.320446] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 31.320448] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 31.320449] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 31.320451] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 31.320452] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 31.320453] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 31.320455] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 31.320456] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 31.320458] hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort [ 31.320459] hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort [ 31.320460] hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort [ 31.320494] hm2/hm2_5i25.0: registered [ 31.320496] hm2_5i25.0: initialized AnyIO board at 0000:05:02.0 [ 31.453130] hm2/hm2_5i25.0: Watchdog has bit! (set the .has-bit pin to False to resume) [ 31.463835] [ 31.463837] In recent history there were [ 31.463838] 463051, 24210495, 234240995, 27159464, and 2443651 [ 31.463839] elapsed clocks between calls to the motion controller. [ 31.463842] This time, there were 6381947 which is so anomalously [ 31.463842] large that it probably signifies a problem with your [ 31.463843] realtime configuration. For the rest of this run of [ 31.463844] EMC, this message will be suppressed. [ 31.463845] [ 120.982026] hm2_5i25.0: dropping AnyIO board at 0000:05:02.0 [ 120.982030] hm2/hm2_5i25.0: unregistered [ 120.982064] hm2_pci: driver unloaded [ 120.983150] hm2: unloading [ 123.042040] RTAI[math]: unloaded. [ 123.043084] SCHED releases registered named ALIEN PEDV$D [ 123.046847] RTAI[malloc]: unloaded. [ 123.143730] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 123.144817] I-pipe: head domain RTAI unregistered. [ 123.144856] RTAI[hal]: unmounted. [ 126.730618] I-pipe: head domain RTAI registered. [ 126.730622] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 126.730653] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 126.730656] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499148, CLK_FREQ 3399809000, CPU_FREQ 3399809000 [ 126.730658] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 126.730660] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499148, 12499148, 12482250 [ 126.735376] RTAI[malloc]: global heap size = 2097152 bytes, . [ 126.735402] , , kstacks pool size = 524288 bytes. [ 126.735405] RTAI[sched]: hard timer type/freq = APIC/12499148(Hz); default timing: oneshot; linear timed lists. [ 126.735407] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399809000 hz. [ 126.735409] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 126.738113] RTAI[math]: loaded. [ 126.877373] RTAPI: ERROR: Unexpected realtime delay on task 1 [ 126.877375] This Message will only display once per session. [ 126.877377] Run the Latency Test and resolve before continuing. [ 126.881047] hm2: loading Mesa HostMot2 driver version 0.15 [ 126.882174] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 126.882209] hm2_pci: discovered 5i25 at 0000:05:02.0 [ 126.882655] hm2/hm2_5i25.0: Smart Serial Firmware Version 38 [ 126.938384] hm2/hm2_5i25.0: 34 I/O Pins used: [ 126.938387] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 126.938388] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 126.938390] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 126.938392] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 126.938394] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 126.938396] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 126.938398] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 126.938400] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 126.938401] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 126.938403] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 126.938405] hm2/hm2_5i25.0: IO Pin 010 (P3-07): IOPort [ 126.938406] hm2/hm2_5i25.0: IO Pin 011 (P3-08): IOPort [ 126.938408] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 126.938409] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 126.938411] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) [ 126.938413] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) [ 126.938415] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) [ 126.938416] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 126.938418] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 126.938419] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 126.938421] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 126.938422] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 126.938424] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 126.938425] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 126.938426] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 126.938428] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 126.938429] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 126.938431] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 126.938432] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 126.938434] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 126.938435] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 126.938437] hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort [ 126.938438] hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort [ 126.938439] hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort [ 126.938474] hm2/hm2_5i25.0: registered [ 126.938475] hm2_5i25.0: initialized AnyIO board at 0000:05:02.0 [ 127.093441] hm2/hm2_5i25.0: Watchdog has bit! (set the .has-bit pin to False to resume) [ 127.105420] [ 127.105421] In recent history there were [ 127.105422] 11545110, 122437459, 5966960, 6264935, and 1313771 [ 127.105423] elapsed clocks between calls to the motion controller. [ 127.105425] This time, there were 27207296 which is so anomalously [ 127.105426] large that it probably signifies a problem with your [ 127.105426] realtime configuration. For the rest of this run of [ 127.105427] EMC, this message will be suppressed. [ 127.105428] [ 132.609954] hm2_5i25.0: dropping AnyIO board at 0000:05:02.0 [ 132.609958] hm2/hm2_5i25.0: unregistered [ 132.609993] hm2_pci: driver unloaded [ 132.611148] hm2: unloading [ 134.662705] RTAI[math]: unloaded. [ 134.663697] SCHED releases registered named ALIEN PEDV$D [ 134.667229] RTAI[malloc]: unloaded. [ 134.764962] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 134.766037] I-pipe: head domain RTAI unregistered. [ 134.766076] RTAI[hal]: unmounted. [ 141.202934] I-pipe: head domain RTAI registered. [ 141.202938] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 141.202970] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 141.202973] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499148, CLK_FREQ 3399809000, CPU_FREQ 3399809000 [ 141.202975] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 141.202977] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499148, 12499148, 11327000 [ 141.207761] RTAI[malloc]: global heap size = 2097152 bytes, . [ 141.207783] , , kstacks pool size = 524288 bytes. [ 141.207786] RTAI[sched]: hard timer type/freq = APIC/12499148(Hz); default timing: oneshot; linear timed lists. [ 141.207788] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399809000 hz. [ 141.207790] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 141.211802] RTAI[math]: loaded. [ 141.354700] hm2: loading Mesa HostMot2 driver version 0.15 [ 141.355754] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 141.355789] hm2_pci: discovered 5i25 at 0000:05:02.0 [ 141.356230] hm2/hm2_5i25.0: Smart Serial Firmware Version 38 [ 141.412054] hm2/hm2_5i25.0: 34 I/O Pins used: [ 141.412056] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 141.412059] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 141.412061] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 141.412063] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 141.412065] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 141.412067] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 141.412069] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 141.412070] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 141.412072] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 141.412074] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 141.412076] hm2/hm2_5i25.0: IO Pin 010 (P3-07): IOPort [ 141.412077] hm2/hm2_5i25.0: IO Pin 011 (P3-08): IOPort [ 141.412079] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 141.412080] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 141.412082] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) [ 141.412084] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) [ 141.412086] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) [ 141.412088] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 141.412089] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 141.412090] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 141.412092] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 141.412093] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 141.412095] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 141.412096] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 141.412097] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 141.412099] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 141.412100] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 141.412102] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 141.412103] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 141.412104] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 141.412106] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 141.412107] hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort [ 141.412109] hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort [ 141.412110] hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort [ 141.412144] hm2/hm2_5i25.0: registered [ 141.412145] hm2_5i25.0: initialized AnyIO board at 0000:05:02.0 [ 141.574817] RTAPI: ERROR: Unexpected realtime delay on task 1 [ 141.574819] This Message will only display once per session. [ 141.574820] Run the Latency Test and resolve before continuing. [ 141.575802] [ 141.575803] In recent history there were [ 141.575803] 3399539, 3399608, 3421995, 3384938, and 84428 [ 141.575804] elapsed clocks between calls to the motion controller. [ 141.575806] This time, there were 3324594 which is so anomalously [ 141.575807] large that it probably signifies a problem with your [ 141.575808] realtime configuration. For the rest of this run of [ 141.575808] EMC, this message will be suppressed. [ 141.575809] [ 145.900243] hm2/hm2_5i25.0: Watchdog has bit! (set the .has-bit pin to False to resume) [ 2153.978399] hm2_5i25.0: dropping AnyIO board at 0000:05:02.0 [ 2153.978403] hm2/hm2_5i25.0: unregistered [ 2153.978443] hm2_pci: driver unloaded [ 2153.979539] hm2: unloading [ 2156.035073] RTAI[math]: unloaded. [ 2156.036118] SCHED releases registered named ALIEN PEDV$D [ 2156.039353] RTAI[malloc]: unloaded. [ 2156.136193] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 2156.137220] I-pipe: head domain RTAI unregistered. [ 2156.137259] RTAI[hal]: unmounted. [ 2168.471344] I-pipe: head domain RTAI registered. [ 2168.471354] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 2168.471386] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 2168.471389] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499148, CLK_FREQ 3399809000, CPU_FREQ 3399809000 [ 2168.471391] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 2168.471393] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499148, 12499148, 8838500 [ 2168.477612] RTAI[malloc]: global heap size = 2097152 bytes, . [ 2168.477637] , , kstacks pool size = 524288 bytes. [ 2168.477640] RTAI[sched]: hard timer type/freq = APIC/12499148(Hz); default timing: oneshot; linear timed lists. [ 2168.477642] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399809000 hz. [ 2168.477644] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 2168.483002] RTAI[math]: loaded. [ 2168.626395] hm2: loading Mesa HostMot2 driver version 0.15 [ 2168.627468] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 2168.627503] hm2_pci: discovered 5i25 at 0000:05:02.0 [ 2168.627950] hm2/hm2_5i25.0: Smart Serial Firmware Version 38 [ 2168.683636] hm2/hm2_5i25.0: 34 I/O Pins used: [ 2168.683639] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 2168.683641] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 2168.683643] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 2168.683645] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 2168.683646] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 2168.683648] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 2168.683650] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 2168.683652] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 2168.683654] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 2168.683656] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 2168.683657] hm2/hm2_5i25.0: IO Pin 010 (P3-07): IOPort [ 2168.683659] hm2/hm2_5i25.0: IO Pin 011 (P3-08): IOPort [ 2168.683660] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 2168.683662] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 2168.683664] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) [ 2168.683665] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) [ 2168.683667] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) [ 2168.683669] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 2168.683670] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 2168.683672] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 2168.683673] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 2168.683675] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 2168.683676] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 2168.683677] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 2168.683679] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 2168.683680] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 2168.683682] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 2168.683683] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 2168.683685] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 2168.683686] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 2168.683688] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 2168.683689] hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort [ 2168.683691] hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort [ 2168.683692] hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort [ 2168.683725] hm2/hm2_5i25.0: registered [ 2168.683727] hm2_5i25.0: initialized AnyIO board at 0000:05:02.0 [ 2168.907701] [ 2168.907703] In recent history there were [ 2168.907704] 3386212, 3416260, 3383735, 3400311, and 3401548 [ 2168.907704] elapsed clocks between calls to the motion controller. [ 2168.907707] This time, there were 4078348 which is so anomalously [ 2168.907707] large that it probably signifies a problem with your [ 2168.907708] realtime configuration. For the rest of this run of [ 2168.907709] EMC, this message will be suppressed. [ 2168.907709] [ 2169.007689] hm2/hm2_5i25.0: Watchdog has bit! (set the .has-bit pin to False to resume) [ 2169.216287] RTAPI: ERROR: Unexpected realtime delay on task 1 [ 2169.216289] This Message will only display once per session. [ 2169.216290] Run the Latency Test and resolve before continuing. [ 2210.729878] hm2_5i25.0: dropping AnyIO board at 0000:05:02.0 [ 2210.729882] hm2/hm2_5i25.0: unregistered [ 2210.729918] hm2_pci: driver unloaded [ 2210.730932] hm2: unloading [ 2212.787927] RTAI[math]: unloaded. [ 2212.788916] SCHED releases registered named ALIEN PEDV$D [ 2212.792386] RTAI[malloc]: unloaded. [ 2212.891157] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 2212.892175] I-pipe: head domain RTAI unregistered. [ 2212.892214] RTAI[hal]: unmounted. [ 2220.056444] I-pipe: head domain RTAI registered. [ 2220.056448] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 2220.056481] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 2220.056484] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499148, CLK_FREQ 3399809000, CPU_FREQ 3399809000 [ 2220.056486] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 2220.056488] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499148, 12499148, 11942500 [ 2220.061097] RTAI[malloc]: global heap size = 2097152 bytes, . [ 2220.061121] , , kstacks pool size = 524288 bytes. [ 2220.061124] RTAI[sched]: hard timer type/freq = APIC/12499148(Hz); default timing: oneshot; linear timed lists. [ 2220.061126] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399809000 hz. [ 2220.061128] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 2220.067945] RTAI[math]: loaded. [ 2262.962977] RTAI[math]: unloaded. [ 2262.964019] SCHED releases registered named ALIEN PEDV$D [ 2262.968644] RTAI[malloc]: unloaded. [ 2263.065939] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 2263.066973] I-pipe: head domain RTAI unregistered. [ 2263.067012] RTAI[hal]: unmounted. [ 2285.053421] I-pipe: head domain RTAI registered. [ 2285.053425] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 2285.053458] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 2285.053461] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499148, CLK_FREQ 3399809000, CPU_FREQ 3399809000 [ 2285.053463] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 2285.053466] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499148, 12499148, 12478250 [ 2285.058059] RTAI[malloc]: global heap size = 2097152 bytes, . [ 2285.058084] , , kstacks pool size = 524288 bytes. [ 2285.058087] RTAI[sched]: hard timer type/freq = APIC/12499148(Hz); default timing: oneshot; linear timed lists. [ 2285.058089] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399809000 hz. [ 2285.058091] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 2285.063785] RTAI[math]: loaded. [ 2285.203014] RTAPI: ERROR: Unexpected realtime delay on task 1 [ 2285.203017] This Message will only display once per session. [ 2285.203019] Run the Latency Test and resolve before continuing. [ 2285.206633] hm2: loading Mesa HostMot2 driver version 0.15 [ 2285.207792] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 2285.207826] hm2_pci: discovered 5i25 at 0000:05:02.0 [ 2285.208271] hm2/hm2_5i25.0: Smart Serial Firmware Version 38 [ 2285.264054] hm2/hm2_5i25.0: 34 I/O Pins used: [ 2285.264056] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 2285.264058] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 2285.264060] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 2285.264062] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 2285.264064] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 2285.264066] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 2285.264068] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 2285.264070] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 2285.264071] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 2285.264073] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 2285.264075] hm2/hm2_5i25.0: IO Pin 010 (P3-07): IOPort [ 2285.264076] hm2/hm2_5i25.0: IO Pin 011 (P3-08): IOPort [ 2285.264078] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 2285.264079] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 2285.264081] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) [ 2285.264083] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) [ 2285.264085] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) [ 2285.264086] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 2285.264088] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 2285.264089] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 2285.264091] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 2285.264092] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 2285.264094] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 2285.264095] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 2285.264096] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 2285.264098] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 2285.264099] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 2285.264101] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 2285.264102] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 2285.264104] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 2285.264105] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 2285.264107] hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort [ 2285.264108] hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort [ 2285.264110] hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort [ 2285.264143] hm2/hm2_5i25.0: registered [ 2285.264145] hm2_5i25.0: initialized AnyIO board at 0000:05:02.0 [ 2285.419439] hm2/hm2_5i25.0: Watchdog has bit! (set the .has-bit pin to False to resume) [ 2285.422363] [ 2285.422364] In recent history there were [ 2285.422365] 134335233, 2144320, 829410, 191228, and 201690 [ 2285.422366] elapsed clocks between calls to the motion controller. [ 2285.422368] This time, there were 6596193 which is so anomalously [ 2285.422369] large that it probably signifies a problem with your [ 2285.422369] realtime configuration. For the rest of this run of [ 2285.422370] EMC, this message will be suppressed. [ 2285.422371] [ 2290.838850] hm2_5i25.0: dropping AnyIO board at 0000:05:02.0 [ 2290.838854] hm2/hm2_5i25.0: unregistered [ 2290.838890] hm2_pci: driver unloaded [ 2290.839992] hm2: unloading [ 2292.896562] RTAI[math]: unloaded. [ 2292.897605] SCHED releases registered named ALIEN PEDV$D [ 2292.900789] RTAI[malloc]: unloaded. [ 2293.000510] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 2293.001540] I-pipe: head domain RTAI unregistered. [ 2293.001577] RTAI[hal]: unmounted. [ 2593.507396] I-pipe: head domain RTAI registered. [ 2593.507401] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 2593.507433] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 2593.507436] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499148, CLK_FREQ 3399809000, CPU_FREQ 3399809000 [ 2593.507438] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 2593.507441] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499148, 12499148, 10482000 [ 2593.512120] RTAI[malloc]: global heap size = 2097152 bytes, . [ 2593.512145] , , kstacks pool size = 524288 bytes. [ 2593.512148] RTAI[sched]: hard timer type/freq = APIC/12499148(Hz); default timing: oneshot; linear timed lists. [ 2593.512151] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399809000 hz. [ 2593.512152] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 2593.520480] RTAI[math]: loaded. [ 2593.663672] hm2: loading Mesa HostMot2 driver version 0.15 [ 2593.664741] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 2593.664776] hm2_pci: discovered 5i25 at 0000:05:02.0 [ 2593.665268] hm2/hm2_5i25.0: Smart Serial Firmware Version 38 [ 2593.721043] hm2/hm2_5i25.0: 34 I/O Pins used: [ 2593.721045] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 2593.721047] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 2593.721049] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 2593.721051] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 2593.721053] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 2593.721054] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 2593.721056] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 2593.721058] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 2593.721060] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 2593.721062] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 2593.721063] hm2/hm2_5i25.0: IO Pin 010 (P3-07): IOPort [ 2593.721065] hm2/hm2_5i25.0: IO Pin 011 (P3-08): IOPort [ 2593.721066] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 2593.721068] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 2593.721070] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) [ 2593.721071] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) [ 2593.721073] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) [ 2593.721075] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 2593.721076] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 2593.721077] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 2593.721079] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 2593.721080] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 2593.721082] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 2593.721083] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 2593.721085] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 2593.721086] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 2593.721087] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 2593.721089] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 2593.721090] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 2593.721092] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 2593.721093] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 2593.721095] hm2/hm2_5i25.0: IO Pin 031 (P2-11): Encoder #1, pin Index (Input) [ 2593.721097] hm2/hm2_5i25.0: IO Pin 032 (P2-12): Encoder #1, pin B (Input) [ 2593.721098] hm2/hm2_5i25.0: IO Pin 033 (P2-13): Encoder #1, pin A (Input) [ 2593.721132] hm2/hm2_5i25.0: registered [ 2593.721133] hm2_5i25.0: initialized AnyIO board at 0000:05:02.0 [ 2593.876411] hm2/hm2_5i25.0: Watchdog has bit! (set the .has-bit pin to False to resume) [ 2593.879492] [ 2593.879492] In recent history there were [ 2593.879493] 133250364, 2178298, 947082, 524327, and 6074438 [ 2593.879494] elapsed clocks between calls to the motion controller. [ 2593.879496] This time, there were 788097 which is so anomalously [ 2593.879497] large that it probably signifies a problem with your [ 2593.879498] realtime configuration. For the rest of this run of [ 2593.879498] EMC, this message will be suppressed. [ 2593.879499] [ 2599.399247] hm2_5i25.0: dropping AnyIO board at 0000:05:02.0 [ 2599.399250] hm2/hm2_5i25.0: unregistered [ 2599.399285] hm2_pci: driver unloaded [ 2599.400305] hm2: unloading [ 2601.457330] RTAI[math]: unloaded. [ 2601.458327] SCHED releases registered named ALIEN PEDV$D [ 2601.463180] RTAI[malloc]: unloaded. [ 2601.560873] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 2601.561963] I-pipe: head domain RTAI unregistered. [ 2601.562003] RTAI[hal]: unmounted. [ 2607.095289] I-pipe: head domain RTAI registered. [ 2607.095294] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 2607.095325] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 2607.095328] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499148, CLK_FREQ 3399809000, CPU_FREQ 3399809000 [ 2607.095330] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 2607.095333] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499148, 12499148, 11098250 [ 2607.100103] RTAI[malloc]: global heap size = 2097152 bytes, . [ 2607.100129] , , kstacks pool size = 524288 bytes. [ 2607.100132] RTAI[sched]: hard timer type/freq = APIC/12499148(Hz); default timing: oneshot; linear timed lists. [ 2607.100134] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399809000 hz. [ 2607.100136] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 2607.107453] RTAI[math]: loaded. [ 2607.250981] hm2: loading Mesa HostMot2 driver version 0.15 [ 2607.252023] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 2607.252056] hm2_pci: discovered 5i25 at 0000:05:02.0 [ 2607.252546] hm2/hm2_5i25.0: Smart Serial Firmware Version 38 [ 2607.308209] hm2/hm2_5i25.0: 34 I/O Pins used: [ 2607.308212] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 2607.308214] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 2607.308216] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 2607.308218] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 2607.308220] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 2607.308222] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 2607.308223] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 2607.308225] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 2607.308227] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 2607.308229] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 2607.308231] hm2/hm2_5i25.0: IO Pin 010 (P3-07): IOPort [ 2607.308232] hm2/hm2_5i25.0: IO Pin 011 (P3-08): IOPort [ 2607.308233] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 2607.308235] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 2607.308237] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) [ 2607.308239] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) [ 2607.308240] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) [ 2607.308242] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 2607.308243] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 2607.308245] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 2607.308246] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 2607.308248] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 2607.308249] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 2607.308251] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 2607.308252] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 2607.308253] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 2607.308255] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 2607.308256] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 2607.308258] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 2607.308259] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 2607.308261] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 2607.308262] hm2/hm2_5i25.0: IO Pin 031 (P2-11): Encoder #1, pin Index (Input) [ 2607.308264] hm2/hm2_5i25.0: IO Pin 032 (P2-12): Encoder #1, pin B (Input) [ 2607.308266] hm2/hm2_5i25.0: IO Pin 033 (P2-13): Encoder #1, pin A (Input) [ 2607.308299] hm2/hm2_5i25.0: registered [ 2607.308301] hm2_5i25.0: initialized AnyIO board at 0000:05:02.0 [ 2607.522103] RTAPI: ERROR: Unexpected realtime delay on task 1 [ 2607.522105] This Message will only display once per session. [ 2607.522105] Run the Latency Test and resolve before continuing. [ 2607.523077] [ 2607.523077] In recent history there were [ 2607.523078] 86772, 3410296, 3434652, 3341525, and 3408049 [ 2607.523079] elapsed clocks between calls to the motion controller. [ 2607.523081] This time, there were 3304609 which is so anomalously [ 2607.523082] large that it probably signifies a problem with your [ 2607.523082] realtime configuration. For the rest of this run of [ 2607.523083] EMC, this message will be suppressed. [ 2607.523084] [ 2613.275201] hm2/hm2_5i25.0: Watchdog has bit! (set the .has-bit pin to False to resume) [ 2736.016577] hm2_5i25.0: dropping AnyIO board at 0000:05:02.0 [ 2736.016580] hm2/hm2_5i25.0: unregistered [ 2736.016618] hm2_pci: driver unloaded [ 2736.017715] hm2: unloading [ 2738.074235] RTAI[math]: unloaded. [ 2738.075236] SCHED releases registered named ALIEN PEDV$D [ 2738.078490] RTAI[malloc]: unloaded. [ 2738.177347] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 2738.178399] I-pipe: head domain RTAI unregistered. [ 2738.178438] RTAI[hal]: unmounted. [ 2748.750044] I-pipe: head domain RTAI registered. [ 2748.750049] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 2748.750082] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 2748.750085] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499148, CLK_FREQ 3399809000, CPU_FREQ 3399809000 [ 2748.750087] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 2748.750089] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499148, 12499148, 7286750 [ 2748.754782] RTAI[malloc]: global heap size = 2097152 bytes, . [ 2748.754809] , , kstacks pool size = 524288 bytes. [ 2748.754812] RTAI[sched]: hard timer type/freq = APIC/12499148(Hz); default timing: oneshot; linear timed lists. [ 2748.754814] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399809000 hz. [ 2748.754816] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 2748.763234] RTAI[math]: loaded. [ 2748.806587] hm2: loading Mesa HostMot2 driver version 0.15 [ 2748.807644] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 2748.807677] hm2_pci: discovered 5i25 at 0000:05:02.0 [ 2748.808260] hm2/hm2_5i25.0: Smart Serial Firmware Version 38 [ 2748.863945] hm2/hm2_5i25.0: 34 I/O Pins used: [ 2748.863947] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 2748.863949] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 2748.863951] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 2748.863952] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 2748.863954] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 2748.863956] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 2748.863958] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 2748.863960] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 2748.863961] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 2748.863963] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 2748.863965] hm2/hm2_5i25.0: IO Pin 010 (P3-07): IOPort [ 2748.863966] hm2/hm2_5i25.0: IO Pin 011 (P3-08): IOPort [ 2748.863968] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 2748.863969] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 2748.863971] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) [ 2748.863973] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) [ 2748.863974] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) [ 2748.863976] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 2748.863977] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 2748.863979] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 2748.863980] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 2748.863981] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 2748.863983] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 2748.863984] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 2748.863986] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 2748.863987] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 2748.863988] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 2748.863990] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 2748.863991] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 2748.863993] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 2748.863994] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 2748.863996] hm2/hm2_5i25.0: IO Pin 031 (P2-11): Encoder #1, pin Index (Input) [ 2748.863998] hm2/hm2_5i25.0: IO Pin 032 (P2-12): Encoder #1, pin B (Input) [ 2748.863999] hm2/hm2_5i25.0: IO Pin 033 (P2-13): Encoder #1, pin A (Input) [ 2748.864033] hm2/hm2_5i25.0: registered [ 2748.864034] hm2_5i25.0: initialized AnyIO board at 0000:05:02.0 [ 2749.088700] [ 2749.088702] In recent history there were [ 2749.088703] 3398714, 3401058, 3398775, 3984534, and 2805362 [ 2749.088704] elapsed clocks between calls to the motion controller. [ 2749.088706] This time, there were 3406321 which is so anomalously [ 2749.088707] large that it probably signifies a problem with your [ 2749.088707] realtime configuration. For the rest of this run of [ 2749.088708] EMC, this message will be suppressed. [ 2749.088708] [ 2749.414478] RTAPI: ERROR: Unexpected realtime delay on task 1 [ 2749.414480] This Message will only display once per session. [ 2749.414481] Run the Latency Test and resolve before continuing. [ 2753.306715] hm2/hm2_5i25.0: Watchdog has bit! (set the .has-bit pin to False to resume) [ 2758.194713] hm2_5i25.0: dropping AnyIO board at 0000:05:02.0 [ 2758.194716] hm2/hm2_5i25.0: unregistered [ 2758.194752] hm2_pci: driver unloaded [ 2758.195832] hm2: unloading [ 2760.250069] RTAI[math]: unloaded. [ 2760.251071] SCHED releases registered named ALIEN PEDV$D [ 2760.254912] RTAI[malloc]: unloaded. [ 2760.352437] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 2760.353526] I-pipe: head domain RTAI unregistered. [ 2760.353565] RTAI[hal]: unmounted. [ 2864.315502] I-pipe: head domain RTAI registered. [ 2864.315507] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 2864.315537] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 2864.315540] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499148, CLK_FREQ 3399809000, CPU_FREQ 3399809000 [ 2864.315542] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 2864.315544] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499148, 12499148, 4938500 [ 2864.320205] RTAI[malloc]: global heap size = 2097152 bytes, . [ 2864.320229] , , kstacks pool size = 524288 bytes. [ 2864.320232] RTAI[sched]: hard timer type/freq = APIC/12499148(Hz); default timing: oneshot; linear timed lists. [ 2864.320234] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399809000 hz. [ 2864.320236] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 2864.330262] RTAI[math]: loaded. [ 2864.369078] RTAPI: ERROR: Unexpected realtime delay on task 1 [ 2864.369082] This Message will only display once per session. [ 2864.369083] Run the Latency Test and resolve before continuing. [ 2864.372824] hm2: loading Mesa HostMot2 driver version 0.15 [ 2864.373973] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 2864.374008] hm2_pci: discovered 5i25 at 0000:05:02.0 [ 2864.374501] hm2/hm2_5i25.0: Smart Serial Firmware Version 38 [ 2864.430274] hm2/hm2_5i25.0: 34 I/O Pins used: [ 2864.430276] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 2864.430278] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 2864.430280] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 2864.430282] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 2864.430283] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 2864.430285] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 2864.430287] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 2864.430289] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 2864.430291] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 2864.430293] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 2864.430294] hm2/hm2_5i25.0: IO Pin 010 (P3-07): IOPort [ 2864.430296] hm2/hm2_5i25.0: IO Pin 011 (P3-08): IOPort [ 2864.430297] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 2864.430299] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 2864.430301] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) [ 2864.430302] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) [ 2864.430304] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) [ 2864.430306] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 2864.430307] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 2864.430309] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 2864.430310] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 2864.430312] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 2864.430313] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 2864.430314] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 2864.430316] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 2864.430317] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 2864.430319] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 2864.430320] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 2864.430322] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 2864.430323] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 2864.430324] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 2864.430326] hm2/hm2_5i25.0: IO Pin 031 (P2-11): Encoder #1, pin Index (Input) [ 2864.430328] hm2/hm2_5i25.0: IO Pin 032 (P2-12): Encoder #1, pin B (Input) [ 2864.430330] hm2/hm2_5i25.0: IO Pin 033 (P2-13): Encoder #1, pin A (Input) [ 2864.430363] hm2/hm2_5i25.0: registered [ 2864.430364] hm2_5i25.0: initialized AnyIO board at 0000:05:02.0 [ 2864.591750] [ 2864.591751] In recent history there were [ 2864.591752] 3108512, 5481612, 7694230, 687987, and 141931 [ 2864.591752] elapsed clocks between calls to the motion controller. [ 2864.591755] This time, there were 5073598 which is so anomalously [ 2864.591756] large that it probably signifies a problem with your [ 2864.591756] realtime configuration. For the rest of this run of [ 2864.591757] EMC, this message will be suppressed. [ 2864.591758] [ 2864.630535] hm2/hm2_5i25.0: Watchdog has bit! (set the .has-bit pin to False to resume) [ 2870.104451] hm2_5i25.0: dropping AnyIO board at 0000:05:02.0 [ 2870.104455] hm2/hm2_5i25.0: unregistered [ 2870.104490] hm2_pci: driver unloaded [ 2870.105653] hm2: unloading [ 2872.158122] RTAI[math]: unloaded. [ 2872.159126] SCHED releases registered named ALIEN PEDV$D [ 2872.162995] RTAI[malloc]: unloaded. [ 2872.259287] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 2872.260445] I-pipe: head domain RTAI unregistered. [ 2872.260485] RTAI[hal]: unmounted. [ 2887.827496] I-pipe: head domain RTAI registered. [ 2887.827511] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 2887.827542] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 2887.827545] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499148, CLK_FREQ 3399809000, CPU_FREQ 3399809000 [ 2887.827547] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 2887.827550] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499148, 12499148, 12195750 [ 2887.832195] RTAI[malloc]: global heap size = 2097152 bytes, . [ 2887.832221] , , kstacks pool size = 524288 bytes. [ 2887.832224] RTAI[sched]: hard timer type/freq = APIC/12499148(Hz); default timing: oneshot; linear timed lists. [ 2887.832227] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399809000 hz. [ 2887.832228] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 2887.836082] RTAI[math]: loaded. [ 2887.979308] hm2: loading Mesa HostMot2 driver version 0.15 [ 2887.980493] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 2887.980527] hm2_pci: discovered 5i25 at 0000:05:02.0 [ 2887.981015] hm2/hm2_5i25.0: Smart Serial Firmware Version 38 [ 2888.036743] hm2/hm2_5i25.0: 34 I/O Pins used: [ 2888.036745] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 2888.036747] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 2888.036749] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 2888.036751] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 2888.036753] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 2888.036754] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 2888.036756] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 2888.036758] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 2888.036760] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 2888.036761] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 2888.036763] hm2/hm2_5i25.0: IO Pin 010 (P3-07): IOPort [ 2888.036765] hm2/hm2_5i25.0: IO Pin 011 (P3-08): IOPort [ 2888.036766] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 2888.036767] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 2888.036769] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) [ 2888.036771] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) [ 2888.036773] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) [ 2888.036774] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 2888.036776] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 2888.036777] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 2888.036778] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 2888.036780] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 2888.036781] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 2888.036783] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 2888.036784] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 2888.036785] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 2888.036787] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 2888.036788] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 2888.036790] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 2888.036791] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 2888.036792] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 2888.036794] hm2/hm2_5i25.0: IO Pin 031 (P2-11): Encoder #1, pin Index (Input) [ 2888.036796] hm2/hm2_5i25.0: IO Pin 032 (P2-12): Encoder #1, pin B (Input) [ 2888.036798] hm2/hm2_5i25.0: IO Pin 033 (P2-13): Encoder #1, pin A (Input) [ 2888.036831] hm2/hm2_5i25.0: registered [ 2888.036833] hm2_5i25.0: initialized AnyIO board at 0000:05:02.0 [ 2888.344590] [ 2888.344592] In recent history there were [ 2888.344593] 3396637, 3395686, 3407652, 3398108, and 3397305 [ 2888.344593] elapsed clocks between calls to the motion controller. [ 2888.344596] This time, there were 14264736 which is so anomalously [ 2888.344597] large that it probably signifies a problem with your [ 2888.344597] realtime configuration. For the rest of this run of [ 2888.344598] EMC, this message will be suppressed. [ 2888.344598] [ 2888.380410] hm2/hm2_5i25.0: Watchdog has bit! (set the .has-bit pin to False to resume) [ 2888.461301] RTAPI: ERROR: Unexpected realtime delay on task 1 [ 2888.461303] This Message will only display once per session. [ 2888.461304] Run the Latency Test and resolve before continuing. [ 2997.324473] hm2_5i25.0: dropping AnyIO board at 0000:05:02.0 [ 2997.324477] hm2/hm2_5i25.0: unregistered [ 2997.324513] hm2_pci: driver unloaded [ 2997.325623] hm2: unloading [ 2999.382587] RTAI[math]: unloaded. [ 2999.383580] SCHED releases registered named ALIEN PEDV$D [ 2999.386142] RTAI[malloc]: unloaded. [ 2999.485214] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 2999.486316] I-pipe: head domain RTAI unregistered. [ 2999.486356] RTAI[hal]: unmounted. [ 3057.426760] I-pipe: head domain RTAI registered. [ 3057.426764] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 3057.426797] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 3057.426799] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499148, CLK_FREQ 3399809000, CPU_FREQ 3399809000 [ 3057.426801] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 3057.426804] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499148, 12499148, 6299500 [ 3057.431374] RTAI[malloc]: global heap size = 2097152 bytes, . [ 3057.431398] , , kstacks pool size = 524288 bytes. [ 3057.431401] RTAI[sched]: hard timer type/freq = APIC/12499148(Hz); default timing: oneshot; linear timed lists. [ 3057.431403] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399809000 hz. [ 3057.431405] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 3057.439179] RTAI[math]: loaded. [ 3087.398039] RTAPI: ERROR: Unexpected realtime delay on task 1 [ 3087.398041] This Message will only display once per session. [ 3087.398042] Run the Latency Test and resolve before continuing. [ 3201.094069] RTAI[math]: unloaded. [ 3201.095177] SCHED releases registered named ALIEN PEDV$D [ 3201.098276] RTAI[malloc]: unloaded. [ 3201.195787] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 3201.197145] I-pipe: head domain RTAI unregistered. [ 3201.197179] RTAI[hal]: unmounted. [ 3212.214767] I-pipe: head domain RTAI registered. [ 3212.214771] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 3212.214804] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 3212.214806] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499148, CLK_FREQ 3399809000, CPU_FREQ 3399809000 [ 3212.214808] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 3212.214811] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499148, 12499148, 12484000 [ 3212.219646] RTAI[malloc]: global heap size = 2097152 bytes, . [ 3212.219670] , , kstacks pool size = 524288 bytes. [ 3212.219673] RTAI[sched]: hard timer type/freq = APIC/12499148(Hz); default timing: oneshot; linear timed lists. [ 3212.219675] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399809000 hz. [ 3212.219677] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 3212.227396] RTAI[math]: loaded. [ 3212.270593] hm2: loading Mesa HostMot2 driver version 0.15 [ 3212.272017] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 3212.272057] hm2_pci: discovered 5i25 at 0000:05:02.0 [ 3212.272620] hm2/hm2_5i25.0: Smart Serial Firmware Version 38 [ 3212.328473] hm2/hm2_5i25.0: 34 I/O Pins used: [ 3212.328476] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 3212.328478] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 3212.328480] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 3212.328482] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 3212.328483] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 3212.328485] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 3212.328487] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 3212.328489] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 3212.328491] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 3212.328492] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 3212.328494] hm2/hm2_5i25.0: IO Pin 010 (P3-07): IOPort [ 3212.328496] hm2/hm2_5i25.0: IO Pin 011 (P3-08): IOPort [ 3212.328497] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 3212.328498] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 3212.328500] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) [ 3212.328502] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) [ 3212.328504] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) [ 3212.328505] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 3212.328507] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 3212.328508] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 3212.328510] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 3212.328511] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 3212.328512] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 3212.328514] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 3212.328516] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 3212.328517] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 3212.328519] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 3212.328520] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 3212.328521] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 3212.328523] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 3212.328524] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 3212.328526] hm2/hm2_5i25.0: IO Pin 031 (P2-11): Encoder #1, pin Index (Input) [ 3212.328528] hm2/hm2_5i25.0: IO Pin 032 (P2-12): Encoder #1, pin B (Input) [ 3212.328530] hm2/hm2_5i25.0: IO Pin 033 (P2-13): Encoder #1, pin A (Input) [ 3212.328564] hm2/hm2_5i25.0: registered [ 3212.328565] hm2_5i25.0: initialized AnyIO board at 0000:05:02.0 [ 3212.653139] [ 3212.653141] In recent history there were [ 3212.653141] 3397658, 3408757, 3361738, 3409828, and 3418445 [ 3212.653142] elapsed clocks between calls to the motion controller. [ 3212.653144] This time, there were 6174740 which is so anomalously [ 3212.653145] large that it probably signifies a problem with your [ 3212.653146] realtime configuration. For the rest of this run of [ 3212.653146] EMC, this message will be suppressed. [ 3212.653147] [ 3212.735279] RTAPI: ERROR: Unexpected realtime delay on task 1 [ 3212.735281] This Message will only display once per session. [ 3212.735282] Run the Latency Test and resolve before continuing. [ 3218.763133] hm2/hm2_5i25.0: Watchdog has bit! (set the .has-bit pin to False to resume) [ 3306.308959] hm2_5i25.0: dropping AnyIO board at 0000:05:02.0 [ 3306.308962] hm2/hm2_5i25.0: unregistered [ 3306.309001] hm2_pci: driver unloaded [ 3306.310054] hm2: unloading [ 3308.370857] RTAI[math]: unloaded. [ 3308.371855] SCHED releases registered named ALIEN PEDV$D [ 3308.376017] RTAI[malloc]: unloaded. [ 3308.473341] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 3308.474548] I-pipe: head domain RTAI unregistered. [ 3308.474587] RTAI[hal]: unmounted. [ 3480.887074] I-pipe: head domain RTAI registered. [ 3480.887078] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 3480.887110] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 3480.887112] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 12499148, CLK_FREQ 3399809000, CPU_FREQ 3399809000 [ 3480.887115] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 3480.887117] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12499148, 12499148, 9750500 [ 3480.891839] RTAI[malloc]: global heap size = 2097152 bytes, . [ 3480.891865] , , kstacks pool size = 524288 bytes. [ 3480.891869] RTAI[sched]: hard timer type/freq = APIC/12499148(Hz); default timing: oneshot; linear timed lists. [ 3480.891925] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3399809000 hz. [ 3480.891927] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 3480.899962] RTAI[math]: loaded. [ 3480.943931] hm2: loading Mesa HostMot2 driver version 0.15 [ 3480.944996] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 3480.945027] hm2_pci: discovered 5i25 at 0000:05:02.0 [ 3480.947067] hm2/hm2_5i25.0: Smart Serial Firmware Version 38 [ 3481.002710] hm2/hm2_5i25.0: 34 I/O Pins used: [ 3481.002713] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 3481.002716] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 3481.002718] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 3481.002720] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 3481.002721] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 3481.002723] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 3481.002725] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 3481.002727] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 3481.002729] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 3481.002730] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 3481.002732] hm2/hm2_5i25.0: IO Pin 010 (P3-07): IOPort [ 3481.002734] hm2/hm2_5i25.0: IO Pin 011 (P3-08): IOPort [ 3481.002735] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 3481.002736] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 3481.002738] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) [ 3481.002740] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) [ 3481.002742] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) [ 3481.002743] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 3481.002745] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 3481.002746] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 3481.002748] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 3481.002749] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 3481.002750] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 3481.002752] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 3481.002753] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 3481.002755] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 3481.002756] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 3481.002757] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 3481.002759] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 3481.002760] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 3481.002762] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 3481.002763] hm2/hm2_5i25.0: IO Pin 031 (P2-11): Encoder #1, pin Index (Input) [ 3481.002765] hm2/hm2_5i25.0: IO Pin 032 (P2-12): Encoder #1, pin B (Input) [ 3481.002767] hm2/hm2_5i25.0: IO Pin 033 (P2-13): Encoder #1, pin A (Input) [ 3481.002796] hm2/hm2_5i25.0: registered [ 3481.002797] hm2_5i25.0: initialized AnyIO board at 0000:05:02.0 [ 3481.310068] [ 3481.310069] In recent history there were [ 3481.310070] 3403229, 3397252, 3395982, 3400031, and 3399816 [ 3481.310071] elapsed clocks between calls to the motion controller. [ 3481.310073] This time, there were 7419164 which is so anomalously [ 3481.310074] large that it probably signifies a problem with your [ 3481.310075] realtime configuration. For the rest of this run of [ 3481.310075] EMC, this message will be suppressed. [ 3481.310076] [ 3481.957424] RTAPI: ERROR: Unexpected realtime delay on task 1 [ 3481.957426] This Message will only display once per session. [ 3481.957426] Run the Latency Test and resolve before continuing. [ 3503.151618] hm2/hm2_5i25.0: Watchdog has bit! (set the .has-bit pin to False to resume)