--------------------------------------------------------------- New PathPilot start at Fri Aug 31 07:51:30 BST 2018 { "branch": "release2...origin/release2", "build": 1, "commit": "97fe683d77b2f02c4e6c2a5070b103161cb8dac2", "kernels": [ "4.11.9-rt7" ], "status": "", "tag": "v2.1.3-c1", "version": "v2.1.3" } --------------------------------------------------------------- starting log rotator /home/operator/tmc/scripts/logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 2388 Keyboard event is /dev/input/event2 on device /dev/input/event2 key lshift is testing 0 on device /dev/input/event2 key lalt is testing 0 on device /dev/input/event2 key lctrl is testing 0 on device /dev/input/event2 deviceresult = 0 shifttest result is 0 Keyboard event is /dev/input/event2 on device /dev/input/event2 key lshift is testing 0 on device /dev/input/event2 key lalt is testing 0 on device /dev/input/event2 deviceresult = 0 shifttest result is 0 Starting PathPilot Manager program. sudo dmidecode -s system-product-name: Not Specified uname -a: Linux tormachpcnc 4.11.9-rt7 #1 SMP PREEMPT RT Fri Aug 4 12:03:32 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux Setting environment... EMC2VERSION=2.8.0~pre1 LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib TMP_DIR=/tmp/linuxcnc EMC2_HOME=/home/operator/tmc LD_LIBRARY_PATH=/home/operator/tmc/lib LINUXCNC_BIN_DIR=/home/operator/tmc/bin NML_FILE=/home/operator/tmc/configs/common/linuxcnc.nml PYTHONPATH=/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/python/config_picker appending to Python sys.path appending: /home/operator/tmc/python appending: /home/operator/tmc/lib/python appending: /home/operator/tmc/python/config_picker PATH=/home/operator/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/operator/teamviewerqs:/home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts update file extension is: tgp 2018-08-31 07:51:31.170534 | Tooltips successfully loaded. [/home/operator/v2.1.3/python/tooltipmgr.py:295] Checking required additional .deb packages are installed Checking for package blt installed package: blt already installed. Checking for proper grub configuration... /etc/default/grub already configured for terminal output = vga_text on boot, no patch needed Checking for proper samba configuration... Samba security already set to 'user' in file /etc/samba/smb.conf Total RAM: 4096 MB /home/operator/dropbox.py not present and executable. /home/operator/tmc/scripts/drop_caches.sh starting . . . No touchscreen found Disabling ethernet rx irq coalescing sudo ethtool --coalesce eth0 rx-usecs 0 rx-frames 1: sudo ethtool --show-coalesce eth0: Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 0 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 USB mount point: /media/operator sudo python /home/operator/tmc/scripts/update-cgconfig.py: Total RAM: 4096 MB Utility CG Size: 1024 MB Utility CG VM Size: 1024 MB /etc/cgconfig.conf updated. cgconfigparser successfully loaded /etc/cgconfig.conf no update file found eth0 Link encap:Ethernet HWaddr 00:19:d1:e3:eb:2f inet addr:10.10.10.9 Bcast:10.10.10.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:38 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:5841 (5.8 KB) Interrupt:20 Memory:e0300000-e0320000 eth0 present on machine controller top of pathpilotmanager.py while() loop /home/operator/tmc/bin/rtapi_app owner: 0, group: 0, mode" 104755 sudo chown root:root /home/operator/tmc/bin/rtapi_app: sudo chmod 4755 /home/operator/tmc/bin/rtapi_app: /home/operator/tmc/bin/rtapi_app owner: 0, group: 0 mode" 104755 done checking rtapi_app permissions configured INI file: /home/operator/tmc/configs/tormach_mill/tormach_1100-3_7i92.ini set_comm_method.py ethernet already setup for machine control by eth0 so not doing anything. [HOSTMOT2]BITFILE0: /home/operator/tmc/mesa/7i92_C11Gx2D.bit Ethernet attached FPGA. [HOSTMOT2]DRIVER_PARAMS: "board_ip=10.10.10.10 config=num_encoders=1 num_pwmgens=1 num_stepgens=5 " params: board_ip=10.10.10.10 config=num_encoders=1 num_pwmgens=1 num_stepgens=5 FPGA IP address: 10.10.10.10 ip addr show eth0: 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:19:d1:e3:eb:2f brd ff:ff:ff:ff:ff:ff inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 valid_lft forever preferred_lft forever ip addr show eth0 | grep -w eth0:: 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 ip addr show eth0 | grep -w inet: inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0 BEFORE disabling autonegotiation for eth0: Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: off (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes ethtool returned 0 when turning autoneg off Ethernet FPGA found at IP 10.10.10.10 FINAL settings for interface eth0: Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off MDI-X: off (auto) Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes ['sudo', '/home/operator/tmc/bin/mesaflash', '--device', '7i92', '--addr', '10.10.10.10', '--verify', '/home/operator/tmc/mesa/7i92_C11Gx2D.bit'] Checking file... OK File type: BIT file Boot sector OK Verifying EEPROM sectors starting from 0x100000... |VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV Board configuration verified successfully. mesaflash returned 0 FPGA .bit file programming verified as correct. About to run scripts/start_linuxcnc. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3_7i92.ini expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3_7i92.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC version - 2.8.0~pre1 LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd DEBUG not defined so python IS optimizing. PYTHONOPTIMIZE=YES inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python new PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/python/config_picker Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3_7i92.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3_7i92.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python new PYTHONPATH: /home/operator/tmc/python:/home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/python/config_picker NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator TOOL_TABLE=~/mill_data/tool.tbl Tool table filename: /home/operator/mill_data/tool.tbl Tool table machine type: mill check_machine_tool_table.py /home/operator/mill_data/tool.tbl mill 2018-08-31 07:51:37.641124 | tool file is /home/operator/mill_data/tool.tbl [scripts/check_machine_tool_table.py:362] 2018-08-31 07:51:37.655407 (+0:00:00.014283) | machine type is mill [scripts/check_machine_tool_table.py:363] 2018-08-31 07:51:37.656016 (+0:00:00.000609) | Scanning mill tool table [scripts/check_machine_tool_table.py:107] 2018-08-31 07:51:37.662884 (+0:00:00.006868) | highest tool number: 1000 [scripts/check_machine_tool_table.py:244] 2018-08-31 07:51:37.664071 (+0:00:00.001187) | tool table is already up to date [scripts/check_machine_tool_table.py:248] Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3_7i92.ini halcmd -i /home/operator/tmc/configs/tormach_mill/tormach_1100-3_7i92.ini -f tormach_mill_mesa.hal Waiting for component 'trivkins' to become ready...Waited 3 seconds for master. giving up. Note: Using POSIX realtime hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.3 iptables: No chain/target/match by that name. hm2_eth: 10.10.10.10 config=num_encoders=1 num_pwmgens=1 num_stepgens=5 : Hardware address: 00:60:1b:13:02:62 hm2_eth: discovered 7I92 hm2/hm2_7i92.0: 34 I/O Pins used: hm2/hm2_7i92.0: IO Pin 000 (P2-01): IOPort hm2/hm2_7i92.0: IO Pin 001 (P2-14): PWMGen #0, pin Out0 (PWM or Up) (Output) hm2/hm2_7i92.0: IO Pin 002 (P2-02): StepGen #0, pin Step (Output) hm2/hm2_7i92.0: IO Pin 003 (P2-15): IOPort hm2/hm2_7i92.0: IO Pin 004 (P2-03): StepGen #0, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 005 (P2-16): IOPort hm2/hm2_7i92.0: IO Pin 006 (P2-04): StepGen #1, pin Step (Output) hm2/hm2_7i92.0: IO Pin 007 (P2-17): StepGen #4, pin Step (Output) hm2/hm2_7i92.0: IO Pin 008 (P2-05): StepGen #1, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 009 (P2-06): StepGen #2, pin Step (Output) hm2/hm2_7i92.0: IO Pin 010 (P2-07): StepGen #2, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 011 (P2-08): StepGen #3, pin Step (Output) hm2/hm2_7i92.0: IO Pin 012 (P2-09): StepGen #3, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 013 (P2-10): Encoder #0, pin A (Input) hm2/hm2_7i92.0: IO Pin 014 (P2-11): Encoder #0, pin B (Input) hm2/hm2_7i92.0: IO Pin 015 (P2-12): Encoder #0, pin Index (Input) hm2/hm2_7i92.0: IO Pin 016 (P2-13): IOPort hm2/hm2_7i92.0: IO Pin 017 (P1-01): IOPort hm2/hm2_7i92.0: IO Pin 018 (P1-14): PWMGen #1, pin Out0 (PWM or Up) (Output) hm2/hm2_7i92.0: IO Pin 019 (P1-02): StepGen #5, pin Step (Output) hm2/hm2_7i92.0: IO Pin 020 (P1-15): IOPort hm2/hm2_7i92.0: IO Pin 021 (P1-03): StepGen #5, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 022 (P1-16): IOPort hm2/hm2_7i92.0: IO Pin 023 (P1-04): StepGen #6, pin Step (Output) hm2/hm2_7i92.0: IO Pin 024 (P1-17): StepGen #9, pin Step (Output) hm2/hm2_7i92.0: IO Pin 025 (P1-05): StepGen #6, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 026 (P1-06): StepGen #7, pin Step (Output) hm2/hm2_7i92.0: IO Pin 027 (P1-07): StepGen #7, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 028 (P1-08): StepGen #8, pin Step (Output) hm2/hm2_7i92.0: IO Pin 029 (P1-09): StepGen #8, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 030 (P1-10): Encoder #1, pin A (Input) hm2/hm2_7i92.0: IO Pin 031 (P1-11): Encoder #1, pin B (Input) hm2/hm2_7i92.0: IO Pin 032 (P1-12): Encoder #1, pin Index (Input) hm2/hm2_7i92.0: IO Pin 033 (P1-13): IOPort hm2/hm2_7i92.0: registered sysctl: cannot stat /proc/sys/net/ipv6/conf/eth0/disable_ipv6: No such file or directory hm2_eth: ERROR: Failed to execute '/sbin/sysctl -q net.ipv6.conf.eth0.disable_ipv6=1' 2018-08-31 07:51:41.932336 | Z-Bot ATC : HAL component : started [python/hal_zbotatc.py:29] 2018-08-31 07:51:42.530070 | Smart Cool: HAL component: started [python/hal_zbotschnozz.py:45] tormachheightgauge: starting halcmd -i /home/operator/tmc/configs/tormach_mill/tormach_1100-3_7i92.ini -f custom_encoder_ilowpass.hal halcmd -i /home/operator/tmc/configs/tormach_mill/tormach_1100-3_7i92.ini -f custom_mpg_test.hal Starting TASK program: milltask task pid=2556 Starting DISPLAY program: /home/operator/tmc/python/tormach_mill_ui.py Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 tormach_mill_ui.py arguments are ['/home/operator/tmc/python/tormach_mill_ui.py', '-ini', '/home/operator/tmc/configs/tormach_mill/tormach_1100-3_7i92.ini'] Using locale ('en_US', 'UTF-8') msg_hello 2018-08-31 07:51:46.734545 | GUI thread id is 139691142162240 [/home/operator/v2.1.3/python/ui_common.py:468] 2018-08-31 07:51:46.852890 (+0:00:00.118345) | Material data imported [/home/operator/v2.1.3/python/ui_support.py:979] Ini file is: 2018-08-31 07:51:46.862296 (+0:00:00.009406) | Gathering eth0 stats every 15 minutes. [/home/operator/v2.1.3/python/stats.py:34] 2018-08-31 07:51:46.874888 | Tooltips successfully loaded. [/home/operator/v2.1.3/python/tooltipmgr.py:295] millshuttlexpress.hal:63: Pin 'axis.0.jog-enable' was already linked to signal 'xen-out' 2018-08-31 07:51:47.027514 | Warning: something failed running halcmd on 'millshuttlexpress.hal' [tormach_mill_ui.py:421] 2018-08-31 07:51:47.081704 (+0:00:00.054190) | Stepover data imported [/home/operator/v2.1.3/python/mill_fs.py:588] 2018-08-31 07:51:47.086103 (+0:00:00.004399) | Mill __init__ after initial status.poll() - tool in spindle is 0 [tormach_mill_ui.py:518] 2018-08-31 07:51:47.163871 (+0:00:00.077768) | UI version: v2.1.3 [/home/operator/v2.1.3/python/ui_common.py:3614] 2018-08-31 07:51:47.507005 (+0:00:00.343134) | spindle type: 0 [tormach_mill_ui.py:1133] 2018-08-31 07:51:47.558405 (+0:00:00.051400) | Found engraving font: Bebas.ttf. [tormach_mill_ui.py:2141] 2018-08-31 07:51:47.563687 (+0:00:00.005282) | Found engraving font: FreeMono.ttf. [tormach_mill_ui.py:2141] 2018-08-31 07:51:47.570562 (+0:00:00.006875) | Found engraving font: FreeMonoBold.ttf. [tormach_mill_ui.py:2141] 2018-08-31 07:51:47.576899 (+0:00:00.006337) | Found engraving font: FreeMonoBoldOblique.ttf. [tormach_mill_ui.py:2141] 2018-08-31 07:51:47.583457 (+0:00:00.006558) | Found engraving font: FreeMonoOblique.ttf. [tormach_mill_ui.py:2141] 2018-08-31 07:51:47.587625 (+0:00:00.004168) | Found engraving font: FreeSans.ttf. [tormach_mill_ui.py:2141] 2018-08-31 07:51:47.590794 (+0:00:00.003169) | Found engraving font: FreeSansBold.ttf. [tormach_mill_ui.py:2141] 2018-08-31 07:51:47.594132 (+0:00:00.003338) | Found engraving font: FreeSansBoldOblique.ttf. [tormach_mill_ui.py:2141] 2018-08-31 07:51:47.598888 (+0:00:00.004756) | Found engraving font: FreeSansOblique.ttf. [tormach_mill_ui.py:2141] 2018-08-31 07:51:47.602446 (+0:00:00.003558) | Found engraving font: FreeSerif.ttf. [tormach_mill_ui.py:2141] 2018-08-31 07:51:47.606872 (+0:00:00.004426) | Found engraving font: FreeSerifBold.ttf. [tormach_mill_ui.py:2141] 2018-08-31 07:51:47.610888 (+0:00:00.004016) | Found engraving font: FreeSerifBoldItalic.ttf. [tormach_mill_ui.py:2141] 2018-08-31 07:51:47.614749 (+0:00:00.003861) | Found engraving font: FreeSerifItalic.ttf. [tormach_mill_ui.py:2141] 2018-08-31 07:51:47.628016 (+0:00:00.013267) | Refreshing tool liststore due to linear scale change [tormach_mill_ui.py:8991] INFO application.dbusnode start 200 : - Publishing DBus service: com.tormach.Dxf2GCode 2018-08-31 07:51:50.215723 (+0:00:02.587707) | Refreshing tool liststore - complete. [tormach_mill_ui.py:9002] 2018-08-31 07:51:50.234466 (+0:00:00.018743) | enable home axis 0, flag 1 [/home/operator/v2.1.3/python/ui_common.py:3007] 2018-08-31 07:51:50.257300 (+0:00:00.022834) | enable home axis 1, flag 1 [/home/operator/v2.1.3/python/ui_common.py:3007] 2018-08-31 07:51:50.280817 (+0:00:00.023517) | enable home axis 2, flag 1 [/home/operator/v2.1.3/python/ui_common.py:3007] 2018-08-31 07:51:50.306643 (+0:00:00.025826) | no enc_door_open_max_rpm found in redis defaulting to 1000 [tormach_mill_ui.py:1677] 2018-08-31 07:51:50.308001 (+0:00:00.001358) | enclosure door open max rpm: 1000 [tormach_mill_ui.py:1680] 2018-08-31 07:51:50.909468 (+0:00:00.601467) | Mill __init__ complete - tool in spindle is 0 [tormach_mill_ui.py:1754] 2018-08-31 07:51:50.911305 (+0:00:00.001837) | screen resolution is now 1024 x 768 [tormach_mill_ui.py:9376] 2018-08-31 07:51:51.825730 (+0:00:00.914425) | Refreshing tool liststore due to linear scale change [tormach_mill_ui.py:8991] 2018-08-31 07:51:55.012043 (+0:00:03.186313) | Refreshing tool liststore - complete. [tormach_mill_ui.py:9002] 2018-08-31 07:51:55.163666 (+0:00:00.151623) | LinuxCNC status.task_mode change was unknown is now MODE_MANUAL [tormach_mill_ui.py:8359] 2018-08-31 07:51:55.165138 (+0:00:00.001472) | LinuxCNC interp_state change was unknown is now INTERP_IDLE [tormach_mill_ui.py:8366] 2018-08-31 07:51:55.166156 (+0:00:00.001018) | status.task_state was unknown is now STATE_ESTOP [tormach_mill_ui.py:8389] 2018-08-31 07:51:55.717047 (+0:00:00.550891) | CPU usage was 0.0, is now 18.2 [tormach_mill_ui.py:8397] 2018-08-31 07:51:56.395815 (+0:00:00.678768) | reset button was pressed. [/home/operator/v2.1.3/python/ui_common.py:1093] 2018-08-31 07:51:56.484914 (+0:00:00.089099) | Hiding image specified with M01 [/home/operator/v2.1.3/python/ui_common.py:3240] task: main loop took 0.106748 seconds 2018-08-31 07:51:56.756141 (+0:00:14.226071) | Smart Cool: Looking for device [python/hal_zbotschnozz.py:344] 2018-08-31 07:51:56.903325 (+0:00:00.418411) | ensure_mode: changing LCNC mode to MODE_MDI [tormach_mill_ui.py:8935] 2018-08-31 07:51:56.947464 (+0:00:00.044139) | issuing MDI command: M30 [tormach_mill_ui.py:7811] 2018-08-31 07:51:56.971917 (+0:00:00.024453) | Purged TormachMessage and TormachAnswers msg queues [tormach_mill_ui.py:2787] 2018-08-31 07:51:56.973703 (+0:00:00.001786) | ensure_mode: changing LCNC mode to MODE_MANUAL [tormach_mill_ui.py:8935] 2018-08-31 07:51:57.017581 (+0:00:00.043878) | No X soft limit stored in redis, not setting. [tormach_mill_ui.py:2806] 2018-08-31 07:51:57.019467 (+0:00:00.001886) | No Y soft limit stored in redis, not setting. [tormach_mill_ui.py:2813] 2018-08-31 07:51:57.021193 (+0:00:00.001726) | No Z soft limit stored in redis, not setting. [tormach_mill_ui.py:2820] 2018-08-31 07:51:57.022382 (+0:00:00.001189) | ensure_mode: changing LCNC mode to MODE_MDI [tormach_mill_ui.py:8935] 2018-08-31 07:51:57.064767 (+0:00:00.042385) | issuing MDI command: G21 [tormach_mill_ui.py:7811] 2018-08-31 07:51:57.109414 (+0:00:00.044647) | issuing MDI command: M61 Q0 [tormach_mill_ui.py:7811] 2018-08-31 07:51:57.202859 (+0:00:00.093445) | issuing MDI command: G43 [tormach_mill_ui.py:7811] 2018-08-31 07:51:57.224992 (+0:00:00.022133) | feedrate: None [tormach_mill_ui.py:2839] 2018-08-31 07:51:57.518023 (+0:00:00.293031) | LinuxCNC status.task_mode change was MODE_MANUAL is now MODE_MDI [tormach_mill_ui.py:8359] 2018-08-31 07:51:57.519469 (+0:00:00.001446) | status.task_state was STATE_ESTOP is now STATE_ON [tormach_mill_ui.py:8389] 2018-08-31 07:52:01.555291 (+0:00:04.035822) | CPU usage was 18.2, is now 7.9 [tormach_mill_ui.py:8397] 2018-08-31 07:52:03.500437 (+0:00:01.945146) | exit button was pressed. [/home/operator/v2.1.3/python/ui_common.py:1093] 2018-08-31 07:52:03.970545 (+0:00:00.470108) | CPU usage was 7.9, is now 31.0 [tormach_mill_ui.py:8397] 2018-08-31 07:52:06.062417 | Gathering eth0 driver stats: [/home/operator/v2.1.3/python/stats.py:45] NIC statistics: rx_packets: 24768 tx_packets: 49541 rx_bytes: 3585688 tx_bytes: 5420681 rx_broadcast: 0 tx_broadcast: 36 rx_multicast: 0 tx_multicast: 3 rx_errors: 0 tx_errors: 0 tx_dropped: 18446658027283643376 multicast: 0 collisions: 0 rx_length_errors: 0 rx_over_errors: 18446634749633003714 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 18446744072639435200 tx_heartbeat_errors: 18446634752271663104 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 rx_header_split: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 0 rx_dma_failed: 0 tx_dma_failed: 0 rx_hwtstamp_cleared: 0 uncorr_ecc_errors: 0 corr_ecc_errors: 0 tx_hwtstamp_timeouts: 0 Killing child process 2583 dxf2gcode_dbus Killing child process 2600 ping Killing child process 2590 dxf2gcode_dbus hm2_eth s32 RW 496305 hm2_7i92.0.read.tmax hm2_eth bit RO FALSE hm2_7i92.0.read.tmax-increased hm2_eth s32 RW 102780 hm2_7i92.0.write.tmax hm2_eth bit RO FALSE hm2_7i92.0.write.tmax-increased motmod s32 RW 13410 motion-command-handler.tmax motmod bit RO FALSE motion-command-handler.tmax-increased motmod s32 RW 68550 motion-controller.tmax motmod bit RO FALSE motion-controller.tmax-increased Shutting down and cleaning up LinuxCNC... 2495 Killing linuxcncsvr Killing task linuxcncsvr, PID=2495 PID TTY STAT TIME COMMAND 2556 Killing milltask Killing task milltask, PID=2556 calling previous SIGTERM handler task: 2339 cycles, min=0.000113, max=0.106748, avg=0.009949, 1 latency excursions (> 10x expected cycle time of 0.010000s) REMAP hal component started 2018-08-31 07:51:43 PID TTY STAT TIME COMMAND 2494 Killing redis-server Killing task redis-server, PID=2494 PID TTY STAT TIME COMMAND 2494 pts/0 Sl+ 0:00 redis-server *:6379 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all tormachheightgauge: exiting 2018-08-31 07:52:07.103924 (+0:00:10.347783) | Smart Cool: KeyboardInterrupt caught, exiting. [python/hal_zbotschnozz.py:584] 2018-08-31 07:52:07.104739 (+0:00:00.000815) | Smart Cool: Exit sequence started [python/hal_zbotschnozz.py:588] 2018-08-31 07:52:07.108086 (+0:00:25.175750) | Z-Bot ATC : KeyboardInterrupt caught, exiting. [python/hal_zbotatc.py:947] 2018-08-31 07:52:07.108875 (+0:00:00.000789) | Z-Bot ATC : Exit sequence started [python/hal_zbotatc.py:951] 2018-08-31 07:52:07.114590 (+0:00:00.005715) | Z-Bot ATC : HAL component : exited [python/hal_zbotatc.py:957] shuttlexpress4: exiting 2018-08-31 07:52:07.114734 (+0:00:00.009995) | Smart Cool: HAL component : exited [python/hal_zbotschnozz.py:591] hm2_eth: HostMot2 ethernet board hm2_7i92.0.packet-read-tmax = 136642 hm2_eth: HostMot2 ethernet board hm2_7i92.0.packet-recv-tmax = 135416 hm2_eth: HostMot2 ethernet board hm2_7i92.0.packet-wrong-seq = 0 hm2_eth: HostMot2 ethernet board hm2_7i92.0.packet-recv-attempts = 1 hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done TOOL_TABLE=~/mill_data/tool.tbl Tool table filename: /home/operator/mill_data/tool.tbl Tool table machine type: mill Migrating mill only tool info for 1-256 from tool table to tool.tbl check_machine_tool_table.py /home/operator/mill_data/tool.tbl mill update-256 2018-08-31 07:52:08.100846 | tool file is /home/operator/mill_data/tool.tbl [scripts/check_machine_tool_table.py:362] 2018-08-31 07:52:08.112354 (+0:00:00.011508) | machine type is mill [scripts/check_machine_tool_table.py:363] 2018-08-31 07:52:08.112918 (+0:00:00.000564) | Back porting tools 1-256 to old mill tool.tbl file [scripts/check_machine_tool_table.py:69] Return code from linuxcnc script: 0 linuxcnc script exited normally. no update file found, exiting normally Keyboard event is /dev/input/event2 on device /dev/input/event2 key lshift is testing 0 on device /dev/input/event2 key lalt is testing 0 on device /dev/input/event2 deviceresult = 0 shifttest result is 0 terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh 2388 TERM kill -TERM 2391 kill -TERM 2388