Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/realtime-2.6.32-122-rtai/modules/linuxcnc LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/share/linuxcnc/tcl/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.5 LINUXCNC - 2.5.1 Machine configuration directory is '/home/tareq/linuxcnc/configs/my-router' Machine configuration file is 'my-router.ini' INIFILE=/home/tareq/linuxcnc/configs/my-router/my-router.ini PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI= DISPLAY=axis Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Realtime system did not load Shutting down and cleaning up LinuxCNC... Killing task linuxcncsvr, PID=2403 Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Cleanup done Debug file information: Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 Can not find -sec LINUXCNC -var NML_FILE -num 1 Can not find -sec EMC -var NML_FILE -num 1 insmod: error inserting '/usr/realtime-2.6.32-122-rtai/modules/rtai_hal.ko': -1 Operation not permitted 2403 PID TTY STAT TIME COMMAND Stopping realtime threads RTAPI: ERROR: could not open shared memory (errno=2) /usr/bin/linuxcnc: line 428: 2441 Segmentation fault $HALCMD stop Unloading hal components RTAPI: ERROR: could not open shared memory (errno=2) /usr/bin/linuxcnc: line 428: 2442 Segmentation fault $HALCMD unload all RTAPI: ERROR: could not open shared memory (errno=2) RTAPI: ERROR: could not open shared memory (errno=2) RTAPI: ERROR: could not open shared memory (errno=2) RTAPI: ERROR: could not open shared memory (errno=2) RTAPI: ERROR: could not open shared memory (errno=2) RTAPI: ERROR: could not open shared memory (errno=2) RTAPI: ERROR: could not open shared memory (errno=2) RTAPI: ERROR: could not open shared memory (errno=2) RTAPI: ERROR: could not open shared memory (errno=2) RTAPI: ERROR: could not open shared memory (errno=2) ERROR: Module hal_lib does not exist in /proc/modules ERROR: Module rtapi does not exist in /proc/modules ERROR: Module rtai_math does not exist in /proc/modules ERROR: Module rtai_sem does not exist in /proc/modules ERROR: Module rtai_fifos does not exist in /proc/modules ERROR: Module rtai_sched does not exist in /proc/modules ERROR: Module rtai_hal does not exist in /proc/modules Kernel message information: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable) [ 0.000000] BIOS-e820: 000000007ffd0000 - 000000007fff0c00 (reserved) [ 0.000000] BIOS-e820: 000000007fff0c00 - 000000007fffc000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fffc000 - 0000000080000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x7ffd0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007ffd0000 (usable) [ 0.000000] modified: 000000007ffd0000 - 000000007fff0c00 (reserved) [ 0.000000] modified: 000000007fff0c00 - 000000007fffc000 (ACPI NVS) [ 0.000000] modified: 000000007fffc000 - 0000000080000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37369000 - 37feff6d [ 0.000000] Allocated new RAMDISK: 008b5000 - 0153bf6d [ 0.000000] Move RAMDISK from 0000000037369000 - 0000000037feff6c to 008b5000 - 0153bf6c [ 0.000000] ACPI: RSDP 000f6ae0 00014 (v00 COMPAQ) [ 0.000000] ACPI: RSDT 7fff0c84 0002C (v01 COMPAQ HP088C 12090320 CPQ 00000001) [ 0.000000] ACPI: FACP 7fff0c00 00084 (v02 COMPAQ HP088C 00000002 CPQ 00000001) [ 0.000000] ACPI: DSDT 7fff0cb0 063F4 (v01 HP nc8000 00010000 MSFT 0100000E) [ 0.000000] ACPI: FACS 7fffbe80 00040 [ 0.000000] ACPI: SSDT 7fff70a4 00248 (v01 COMPAQ CPQGysr 00001001 MSFT 0100000E) [ 0.000000] 1159MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000 - 00008b0db8] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008b1000 - 00008b4160] BRK ==> [00008b1000 - 00008b4160] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008b5000 - 000153bf6d] NEW RAMDISK ==> [00008b5000 - 000153bf6d] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007ffd0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffd0 [ 0.000000] On node 0 totalpages: 524139 [ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c153d000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2320 pages used for memmap [ 0.000000] HighMem zone: 294594 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:80000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @c2800000 s74936 r0 d23368 u4194304 [ 0.000000] pcpu-alloc: s74936 r0 d23368 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520043 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=fee994b1-d009-491f-b818-baea3db1262a ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10484800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ffd0) [ 0.000000] Memory: 2047308k/2096960k available (4539k kernel code, 48292k reserved, 1928k data, 620k init, 1187656k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB) [ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB) [ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] I-pipe 2.6-03: pipeline enabled. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1395.557 MHz processor. [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 2791.11 BogoMIPS (lpj=5582228) [ 0.004039] Security Framework initialized [ 0.004085] AppArmor: AppArmor initialized [ 0.004098] Mount-cache hash table entries: 512 [ 0.004310] Initializing cgroup subsys ns [ 0.004319] Initializing cgroup subsys cpuacct [ 0.004326] Initializing cgroup subsys memory [ 0.004341] Initializing cgroup subsys devices [ 0.004346] Initializing cgroup subsys freezer [ 0.004350] Initializing cgroup subsys net_cls [ 0.004384] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004388] CPU: L2 cache: 1024K [ 0.004396] mce: CPU supports 5 MCE banks [ 0.004421] Performance Events: [ 0.004425] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.004428] no hardware sampling interrupt available. [ 0.004432] p6 PMU driver. [ 0.004441] ... version: 0 [ 0.004444] ... bit width: 32 [ 0.004447] ... generic registers: 2 [ 0.004450] ... value mask: 00000000ffffffff [ 0.004454] ... max period: 000000007fffffff [ 0.004457] ... fixed-purpose events: 0 [ 0.004460] ... event mask: 0000000000000003 [ 0.004468] Checking 'hlt' instruction... OK. [ 0.021236] SMP alternatives: switching to UP code [ 0.028736] Freeing SMP alternatives: 31k freed [ 0.028753] ACPI: Core revision 20090903 [ 0.041698] ACPI: setting ELCR to 0200 (from 0c00) [ 0.044011] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.044019] ftrace: allocating 21003 entries in 42 pages [ 0.054841] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.054847] weird, boot CPU (#0) not listed by the BIOS. [ 0.054850] SMP motherboard not detected. [ 0.054854] Local APIC not detected. Using dummy APIC emulation. [ 0.054857] SMP disabled [ 0.055097] Brought up 1 CPUs [ 0.055102] Total of 1 processors activated (2791.11 BogoMIPS). [ 0.056034] CPU0 attaching NULL sched-domain. [ 0.056234] devtmpfs: initialized [ 0.056424] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.056803] regulator: core version 0.5 [ 0.056876] NET: Registered protocol family 16 [ 0.057051] EISA bus registered [ 0.057062] ACPI: bus type pci registered [ 0.058605] PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=5 [ 0.058608] PCI: Using configuration type 1 for base access [ 0.060024] bio: create slab at 0 [ 0.061173] ACPI: EC: Look up EC in DSDT [ 0.084183] ACPI: Interpreter enabled [ 0.084187] ACPI: (supports S0 S5) [ 0.084201] ACPI: Using PIC for interrupt routing [ 0.097122] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.097347] ACPI: Power Resource [C16F] (on) [ 0.097524] ACPI: Power Resource [C13F] (on) [ 0.097722] ACPI: Power Resource [C186] (on) [ 0.097902] ACPI: Power Resource [C18D] (on) [ 0.097952] ACPI: Power Resource [C197] (on) [ 0.098028] ACPI: Power Resource [C0E8] (on) [ 0.098126] ACPI: Power Resource [C206] (off) [ 0.098219] ACPI: Power Resource [C207] (off) [ 0.098310] ACPI: Power Resource [C208] (off) [ 0.098402] ACPI: Power Resource [C209] (off) [ 0.098638] ACPI: No dock devices found. [ 0.105875] ACPI: PCI Root Bridge [C046] (0000:00) [ 0.105930] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xb0000000-0xbfffffff] [ 0.106059] pci 0000:00:1d.0: reg 20 io port: [0x38c0-0x38df] [ 0.106118] pci 0000:00:1d.1: reg 20 io port: [0x38e0-0x38ff] [ 0.106176] pci 0000:00:1d.2: reg 20 io port: [0x3c00-0x3c1f] [ 0.106242] pci 0000:00:1d.7: reg 10 32bit mmio: [0xa0000000-0xa00003ff] [ 0.106304] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.106311] pci 0000:00:1d.7: PME# disabled [ 0.106406] pci 0000:00:1f.0: Enabled i801 SMBus device [ 0.106413] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.106418] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH4 GPIO [ 0.106445] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.106454] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.106463] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.106472] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.106480] pci 0000:00:1f.1: reg 20 io port: [0x3c20-0x3c2f] [ 0.106489] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.106545] pci 0000:00:1f.3: reg 20 io port: [0x1200-0x121f] [ 0.106594] pci 0000:00:1f.5: reg 10 io port: [0x3000-0x30ff] [ 0.106602] pci 0000:00:1f.5: reg 14 io port: [0x3880-0x38bf] [ 0.106610] pci 0000:00:1f.5: reg 18 32bit mmio: [0xa0100000-0xa01001ff] [ 0.106619] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xa0180000-0xa01800ff] [ 0.106652] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.106657] pci 0000:00:1f.5: PME# disabled [ 0.106692] pci 0000:00:1f.6: reg 10 io port: [0x3400-0x34ff] [ 0.106700] pci 0000:00:1f.6: reg 14 io port: [0x3800-0x387f] [ 0.106741] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.106747] pci 0000:00:1f.6: PME# disabled [ 0.106789] pci 0000:01:00.0: reg 10 32bit mmio pref: [0x98000000-0x9fffffff] [ 0.106797] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff] [ 0.106804] pci 0000:01:00.0: reg 18 32bit mmio: [0x90400000-0x9040ffff] [ 0.106822] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.106845] pci 0000:01:00.0: supports D1 D2 [ 0.106885] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 0.106890] pci 0000:00:01.0: bridge 32bit mmio: [0x90400000-0x904fffff] [ 0.106896] pci 0000:00:01.0: bridge 32bit mmio pref: [0x98000000-0x9fffffff] [ 0.106940] pci 0000:02:04.0: reg 10 32bit mmio: [0x90100000-0x90100fff] [ 0.107023] pci 0000:02:06.0: reg 10 32bit mmio: [0x90180000-0x90180fff] [ 0.107044] pci 0000:02:06.0: supports D1 D2 [ 0.107048] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.107054] pci 0000:02:06.0: PME# disabled [ 0.107091] pci 0000:02:06.1: reg 10 32bit mmio: [0x90200000-0x90200fff] [ 0.107112] pci 0000:02:06.1: supports D1 D2 [ 0.107116] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.107122] pci 0000:02:06.1: PME# disabled [ 0.107158] pci 0000:02:06.2: reg 10 32bit mmio: [0x90280000-0x90280fff] [ 0.107207] pci 0000:02:06.2: supports D1 D2 [ 0.107211] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.107217] pci 0000:02:06.2: PME# disabled [ 0.107254] pci 0000:02:06.3: reg 10 32bit mmio: [0x90300000-0x90300fff] [ 0.107275] pci 0000:02:06.3: supports D1 D2 [ 0.107279] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.107284] pci 0000:02:06.3: PME# disabled [ 0.107334] pci 0000:02:0d.0: reg 10 32bit mmio: [0x90380000-0x903807ff] [ 0.107343] pci 0000:02:0d.0: reg 14 32bit mmio: [0x90080000-0x90083fff] [ 0.107387] pci 0000:02:0d.0: supports D1 D2 [ 0.107390] pci 0000:02:0d.0: PME# supported from D0 D1 D2 D3hot [ 0.107396] pci 0000:02:0d.0: PME# disabled [ 0.107455] pci 0000:02:0e.0: reg 10 64bit mmio: [0x90000000-0x9000ffff] [ 0.107484] pci 0000:02:0e.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.107517] pci 0000:02:0e.0: PME# supported from D3hot D3cold [ 0.107523] pci 0000:02:0e.0: PME# disabled [ 0.107555] pci 0000:00:1e.0: transparent bridge [ 0.107563] pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x903fffff] [ 0.107625] pci_bus 0000:00: on NUMA node 0 [ 0.107632] ACPI: PCI Interrupt Routing Table [\_SB_.C046._PRT] [ 0.107823] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C047._PRT] [ 0.107910] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C058._PRT] [ 0.122822] ACPI: PCI Interrupt Link [C0C3] (IRQs *10 11) [ 0.123077] ACPI: PCI Interrupt Link [C0C4] (IRQs 10 *11) [ 0.123329] ACPI: PCI Interrupt Link [C0C5] (IRQs *10 11) [ 0.123580] ACPI: PCI Interrupt Link [C0C6] (IRQs *10 11) [ 0.123831] ACPI: PCI Interrupt Link [C0C7] (IRQs 10 *11) [ 0.124095] ACPI: PCI Interrupt Link [C0C8] (IRQs 10 *11) [ 0.124331] ACPI: PCI Interrupt Link [C0C9] (IRQs 10 11) *0, disabled. [ 0.124584] ACPI: PCI Interrupt Link [C0CA] (IRQs *10 11) [ 0.124786] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.124795] vgaarb: loaded [ 0.124972] SCSI subsystem initialized [ 0.125042] libata version 3.00 loaded. [ 0.125144] usbcore: registered new interface driver usbfs [ 0.125162] usbcore: registered new interface driver hub [ 0.125198] usbcore: registered new device driver usb [ 0.125407] ACPI: WMI: Mapper loaded [ 0.125411] PCI: Using ACPI for IRQ routing [ 0.125651] NetLabel: Initializing [ 0.125655] NetLabel: domain hash size = 128 [ 0.125657] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.125677] NetLabel: unlabeled traffic allowed by default [ 0.125717] Switching to clocksource tsc [ 0.128001] AppArmor: AppArmor Filesystem Enabled [ 0.128001] pnp: PnP ACPI init [ 0.128001] ACPI: bus type pnp registered [ 0.142490] pnp: PnP ACPI: found 16 devices [ 0.142494] ACPI: ACPI bus type pnp unregistered [ 0.142500] PnPBIOS: Disabled by ACPI PNP [ 0.142515] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.142520] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.142525] system 00:00: iomem range 0x100000-0x7fffffff could not be reserved [ 0.142539] system 00:0d: ioport range 0x140-0x14f has been reserved [ 0.142544] system 00:0d: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.142549] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved [ 0.142557] system 00:0e: ioport range 0x4d0-0x4d1 has been reserved [ 0.142562] system 00:0e: ioport range 0x1000-0x107f has been reserved [ 0.142566] system 00:0e: ioport range 0x1100-0x113f has been reserved [ 0.142571] system 00:0e: ioport range 0x1200-0x121f has been reserved [ 0.142576] system 00:0e: iomem range 0xfec00000-0xfec000ff has been reserved [ 0.142584] system 00:0f: iomem range 0xfec01000-0xfec01fff has been reserved [ 0.177369] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.177374] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.177380] pci 0000:00:01.0: MEM window: 0x90400000-0x904fffff [ 0.177386] pci 0000:00:01.0: PREFETCH window: 0x98000000-0x9fffffff [ 0.177402] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03 [ 0.177406] pci 0000:02:06.0: IO window: 0x004000-0x0040ff [ 0.177412] pci 0000:02:06.0: IO window: 0x004400-0x0044ff [ 0.177418] pci 0000:02:06.0: PREFETCH window: 0x80000000-0x83ffffff [ 0.177424] pci 0000:02:06.0: MEM window: 0x94000000-0x97ffffff [ 0.177430] pci 0000:02:06.1: CardBus bridge, secondary bus 0000:05 [ 0.177434] pci 0000:02:06.1: IO window: 0x004800-0x0048ff [ 0.177440] pci 0000:02:06.1: IO window: 0x004c00-0x004cff [ 0.177446] pci 0000:02:06.1: PREFETCH window: 0x84000000-0x87ffffff [ 0.177452] pci 0000:02:06.1: MEM window: 0xa4000000-0xa7ffffff [ 0.177458] pci 0000:02:06.3: CardBus bridge, secondary bus 0000:09 [ 0.177462] pci 0000:02:06.3: IO window: 0x005000-0x0050ff [ 0.177468] pci 0000:02:06.3: IO window: 0x005400-0x0054ff [ 0.177474] pci 0000:02:06.3: PREFETCH window: 0x88000000-0x8bffffff [ 0.177480] pci 0000:02:06.3: MEM window: 0xa8000000-0xabffffff [ 0.177486] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.177491] pci 0000:00:1e.0: IO window: 0x4000-0x5fff [ 0.177498] pci 0000:00:1e.0: MEM window: 0x90000000-0x903fffff [ 0.177505] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x8dffffff [ 0.177525] pci 0000:00:1e.0: setting latency timer to 64 [ 0.177901] ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 10 [ 0.177905] PCI: setting IRQ 10 as level-triggered [ 0.177912] pci 0000:02:06.0: PCI INT A -> Link[C0C5] -> GSI 10 (level, low) -> IRQ 10 [ 0.177927] pci 0000:02:06.1: PCI INT A -> Link[C0C5] -> GSI 10 (level, low) -> IRQ 10 [ 0.177941] pci 0000:02:06.3: PCI INT A -> Link[C0C5] -> GSI 10 (level, low) -> IRQ 10 [ 0.177950] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.177954] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.177959] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.177963] pci_bus 0000:01: resource 1 mem: [0x90400000-0x904fffff] [ 0.177967] pci_bus 0000:01: resource 2 pref mem [0x98000000-0x9fffffff] [ 0.177972] pci_bus 0000:02: resource 0 io: [0x4000-0x5fff] [ 0.177976] pci_bus 0000:02: resource 1 mem: [0x90000000-0x903fffff] [ 0.177980] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x8dffffff] [ 0.177984] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.177988] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.177992] pci_bus 0000:03: resource 0 io: [0x4000-0x40ff] [ 0.177996] pci_bus 0000:03: resource 1 io: [0x4400-0x44ff] [ 0.178001] pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff] [ 0.178005] pci_bus 0000:03: resource 3 mem: [0x94000000-0x97ffffff] [ 0.178009] pci_bus 0000:05: resource 0 io: [0x4800-0x48ff] [ 0.178013] pci_bus 0000:05: resource 1 io: [0x4c00-0x4cff] [ 0.178017] pci_bus 0000:05: resource 2 pref mem [0x84000000-0x87ffffff] [ 0.178022] pci_bus 0000:05: resource 3 mem: [0xa4000000-0xa7ffffff] [ 0.178026] pci_bus 0000:09: resource 0 io: [0x5000-0x50ff] [ 0.178030] pci_bus 0000:09: resource 1 io: [0x5400-0x54ff] [ 0.178034] pci_bus 0000:09: resource 2 pref mem [0x88000000-0x8bffffff] [ 0.178038] pci_bus 0000:09: resource 3 mem: [0xa8000000-0xabffffff] [ 0.178096] NET: Registered protocol family 2 [ 0.178264] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.178779] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.180274] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.181275] TCP: Hash tables configured (established 131072 bind 65536) [ 0.181280] TCP reno registered [ 0.181458] NET: Registered protocol family 1 [ 0.181579] pci 0000:01:00.0: Boot video device [ 0.181894] Scanning for low memory corruption every 60 seconds [ 0.182075] audit: initializing netlink socket (disabled) [ 0.182101] type=2000 audit(1351541338.178:1): initialized [ 0.195176] Trying to unpack rootfs image as initramfs... [ 0.210807] highmem bounce pool size: 64 pages [ 0.210818] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.213482] VFS: Disk quotas dquot_6.5.2 [ 0.213579] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.218897] fuse init (API version 7.13) [ 0.219070] msgmni has been set to 1680 [ 0.219410] alg: No test for stdrng (krng) [ 0.219510] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.219515] io scheduler noop registered [ 0.219518] io scheduler anticipatory registered [ 0.219521] io scheduler deadline registered [ 0.219603] io scheduler cfq registered (default) [ 0.219788] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.219822] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.219970] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.219976] ACPI: Sleep Button [C13B] [ 0.220050] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.220191] ACPI: Lid Switch [C13A] [ 0.220267] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.220272] ACPI: Power Button [PWRF] [ 0.222397] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.222506] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.222654] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A [ 0.222933] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.223704] ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 11 [ 0.223708] PCI: setting IRQ 11 as level-triggered [ 0.223716] serial 0000:00:1f.6: PCI INT B -> Link[C0C4] -> GSI 11 (level, low) -> IRQ 11 [ 0.223725] serial 0000:00:1f.6: PCI INT B disabled [ 0.225212] brd: module loaded [ 0.225916] loop: module loaded [ 0.226036] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.226176] ata_piix 0000:00:1f.1: version 2.13 [ 0.226190] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.226198] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0C5] -> GSI 10 (level, low) -> IRQ 10 [ 0.230489] isapnp: Scanning for PnP cards... [ 0.236041] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.238445] scsi0 : ata_piix [ 0.238614] scsi1 : ata_piix [ 0.239899] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3c20 irq 14 [ 0.239904] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3c28 irq 15 [ 0.240489] Fixed MDIO Bus: probed [ 0.240547] PPP generic driver version 2.4.2 [ 0.240631] tun: Universal TUN/TAP device driver, 1.6 [ 0.240634] tun: (C) 1999-2004 Max Krasnyansky [ 0.240775] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.241174] ACPI: PCI Interrupt Link [C0CA] enabled at IRQ 10 [ 0.241181] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[C0CA] -> GSI 10 (level, low) -> IRQ 10 [ 0.241205] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.241211] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.241259] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.241300] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.245177] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.294436] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xa0000000 [ 0.314378] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.314622] usb usb1: configuration #1 chosen from 1 choice [ 0.314669] hub 1-0:1.0: USB hub found [ 0.314685] hub 1-0:1.0: 6 ports detected [ 0.314788] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.314815] uhci_hcd: USB Universal Host Controller Interface driver [ 0.315327] ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10 [ 0.315334] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 0.315347] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.315353] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.315412] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.315444] uhci_hcd 0000:00:1d.0: irq 10, io base 0x000038c0 [ 0.315600] usb usb2: configuration #1 chosen from 1 choice [ 0.315644] hub 2-0:1.0: USB hub found [ 0.315654] hub 2-0:1.0: 2 ports detected [ 0.316070] ACPI: PCI Interrupt Link [C0C6] enabled at IRQ 10 [ 0.316076] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0C6] -> GSI 10 (level, low) -> IRQ 10 [ 0.316084] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.316088] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.316134] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.316158] uhci_hcd 0000:00:1d.1: irq 10, io base 0x000038e0 [ 0.316294] usb usb3: configuration #1 chosen from 1 choice [ 0.316331] hub 3-0:1.0: USB hub found [ 0.316341] hub 3-0:1.0: 2 ports detected [ 0.316396] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0C5] -> GSI 10 (level, low) -> IRQ 10 [ 0.316404] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.316409] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.316451] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.316475] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00003c00 [ 0.316612] usb usb4: configuration #1 chosen from 1 choice [ 0.316648] hub 4-0:1.0: USB hub found [ 0.316658] hub 4-0:1.0: 2 ports detected [ 0.316798] PNP: PS/2 Controller [PNP0303:C194,PNP0f13:C195] at 0x60,0x64 irq 1,12 [ 0.318466] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.323055] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.323071] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.323128] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.323160] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.323192] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.323410] mice: PS/2 mouse device common for all mice [ 0.323620] rtc_cmos 00:09: RTC can wake from S4 [ 0.323682] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 [ 0.323702] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.323915] device-mapper: uevent: version 1.0.3 [ 0.324089] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.327886] device-mapper: multipath: version 1.1.0 loaded [ 0.327893] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.328122] EISA: Probing bus 0 at eisa.0 [ 0.328132] Cannot allocate resource for EISA slot 1 [ 0.328135] Cannot allocate resource for EISA slot 2 [ 0.328139] Cannot allocate resource for EISA slot 3 [ 0.328143] Cannot allocate resource for EISA slot 4 [ 0.328146] Cannot allocate resource for EISA slot 5 [ 0.328162] EISA: Detected 0 cards. [ 0.328166] cpuidle: using governor ladder [ 0.328169] cpuidle: using governor menu [ 0.328895] TCP cubic registered [ 0.329172] NET: Registered protocol family 10 [ 0.329853] lo: Disabled Privacy Extensions [ 0.330368] NET: Registered protocol family 17 [ 0.330415] Using IPI No-Shortcut mode [ 0.330553] registered taskstats version 1 [ 0.330970] rtc_cmos 00:09: setting system clock to 2012-10-29 20:08:58 UTC (1351541338) [ 0.330976] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.330979] EDD information not available. [ 0.346036] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.495657] ata1.00: ATA-6: HTS541040G9AT00, MB2OA60A, max UDMA/100 [ 0.495663] ata1.00: 78140160 sectors, multi 16: LBA [ 0.495716] ata1.01: ATAPI: DW-224E-A, A.2F, max MWDMA2 [ 0.511513] ata1.00: configured for UDMA/100 [ 0.526492] ata1.01: configured for MWDMA2 [ 0.917932] isapnp: No Plug & Play device found [ 0.917972] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 0.918177] scsi 0:0:0:0: Direct-Access ATA HTS541040G9AT00 MB2O PQ: 0 ANSI: 5 [ 0.918457] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.919936] scsi 0:0:1:0: CD-ROM TEAC DW-224E-A A.2F PQ: 0 ANSI: 5 [ 0.924384] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 0.924391] Uniform CD-ROM driver Revision: 3.20 [ 0.924565] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 0.924656] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 0.924787] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 0.924859] sd 0:0:0:0: [sda] Write Protect is off [ 0.924864] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.924902] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.925089] sda: sda1 sda2 [ 0.994694] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.088762] Freeing initrd memory: 12827k freed [ 1.108327] usb 2-1: configuration #1 chosen from 1 choice [ 1.108398] Freeing unused kernel memory: 620k freed [ 1.109345] Write protecting the kernel text: 4540k [ 1.109391] Write protecting the kernel read-only data: 1668k [ 1.135384] udev: starting version 151 [ 1.490412] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input5 [ 1.499769] ACPI: Video Device [C0D1] (multi-head: yes rom: no post: no) [ 1.504354] Linux agpgart interface v0.103 [ 1.531968] Floppy drive(s): fd0 is 1.44M [ 1.559114] tg3.c:v3.102 (September 1, 2009) [ 1.561030] FDC 0 is a post-1991 82077 [ 1.561350] ACPI: PCI Interrupt Link [C0C7] enabled at IRQ 11 [ 1.561357] tg3 0000:02:0e.0: PCI INT A -> Link[C0C7] -> GSI 11 (level, low) -> IRQ 11 [ 1.623997] agpgart-intel 0000:00:00.0: Intel 855PM Chipset [ 1.688636] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000 [ 1.689757] eth0: Tigon3 [partno(BMC5705mA3) rev 3003] (PCI:33MHz:32-bit) MAC address 00:08:02:e5:d3:15 [ 1.689763] eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0]) [ 1.689767] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.689771] eth0: dma_rwctrl[763f0000] dma_mask[64-bit] [ 1.689807] ohci1394 0000:02:0d.0: PCI INT A -> Link[C0CA] -> GSI 10 (level, low) -> IRQ 10 [ 1.701838] [drm] Initialized drm 1.1.0 20060810 [ 1.718656] usbcore: registered new interface driver hiddev [ 1.744108] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[90380000-903807ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.754925] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input6 [ 1.755103] generic-usb 0003:046D:C05F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 1.755147] usbcore: registered new interface driver usbhid [ 1.755152] usbhid: v2.6:USB HID core driver [ 1.796612] [drm] radeon defaulting to kernel modesetting. [ 1.796618] [drm] radeon kernel modesetting enabled. [ 1.796698] radeon 0000:01:00.0: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10 [ 1.803465] [drm] radeon: Initializing kernel modesetting. [ 1.803569] [drm] register mmio base: 0x90400000 [ 1.803573] [drm] register mmio size: 65536 [ 1.804048] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 1.804074] [drm] Generation 2 PCI interface, using max accessible memory [ 1.804086] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 1.804106] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 1.804150] radeon 0000:01:00.0: putting AGP V2 device into 4x mode [ 1.804201] [drm] radeon: VRAM 64M [ 1.804204] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF [ 1.804207] [drm] radeon: GTT 256M [ 1.804210] [drm] radeon: GTT from 0xB0000000 to 0xBFFFFFFF [ 1.804234] [drm] radeon: irq initialized. [ 1.804664] [drm] Detected VRAM RAM=64M, BAR=128M [ 1.804670] [drm] RAM width 128bits DDR [ 1.804790] [TTM] Zone kernel: Available graphics memory: 437042 kiB. [ 1.804794] [TTM] Zone highmem: Available graphics memory: 1030870 kiB. [ 1.804819] [drm] radeon: 64M of VRAM memory ready [ 1.804822] [drm] radeon: 256M of GTT memory ready. [ 1.805071] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 1.805091] [drm] radeon: cp idle (0x10000C03) [ 1.805142] [drm] Loading R300 Microcode [ 1.805462] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 1.815579] [drm] radeon: ring at 0x00000000B0000000 [ 1.815607] [drm] ring test succeeded in 1 usecs [ 1.819475] [drm] radeon: ib pool ready. [ 1.819589] [drm] ib test succeeded in 0 usecs [ 1.819921] [drm] DFP table revision: 4 [ 1.820212] [drm] Panel ID String: LGP [ 1.820216] [drm] Panel Size 1024x768 [ 1.820468] [drm] Default TV standard: NTSC [ 1.820471] [drm] 27.000000000 MHz TV ref clk [ 1.820474] [drm] No TV DAC info found in BIOS [ 1.820478] [drm] Default TV standard: NTSC [ 1.820481] [drm] 27.000000000 MHz TV ref clk [ 1.820567] [drm] Radeon Display Connectors [ 1.820570] [drm] Connector 0: [ 1.820572] [drm] VGA [ 1.820576] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 1.820579] [drm] Encoders: [ 1.820582] [drm] CRT1: INTERNAL_DAC1 [ 1.820585] [drm] Connector 1: [ 1.820587] [drm] DVI-D [ 1.820589] [drm] HPD1 [ 1.820593] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 1.820596] [drm] Encoders: [ 1.820598] [drm] DFP1: INTERNAL_TMDS1 [ 1.820601] [drm] Connector 2: [ 1.820603] [drm] LVDS [ 1.820607] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c [ 1.820610] [drm] Encoders: [ 1.820612] [drm] LCD1: INTERNAL_LVDS [ 1.820615] [drm] Connector 3: [ 1.820617] [drm] S-video [ 1.820619] [drm] Encoders: [ 1.820622] [drm] TV1: INTERNAL_DAC2 [ 2.151871] [drm] fb mappable at 0x98040000 [ 2.151875] [drm] vram apper at 0x98000000 [ 2.151878] [drm] size 3145728 [ 2.151881] [drm] fb depth is 24 [ 2.151883] [drm] pitch is 4096 [ 2.152390] fb0: radeondrmfb frame buffer device [ 2.152393] registered panic notifier [ 2.152401] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 2.157181] vga16fb: initializing [ 2.157188] vga16fb: mapped to 0xc00a0000 [ 2.157193] vga16fb: not registering due to another framebuffer present [ 2.214281] Console: switching to colour frame buffer device 128x48 [ 2.841464] xor: automatically using best checksumming function: pIII_sse [ 2.860017] pIII_sse : 3734.000 MB/sec [ 2.860021] xor: using function: pIII_sse (3734.000 MB/sec) [ 2.888571] device-mapper: dm-raid45: initialized v0.2594b [ 3.005672] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 3.032452] ieee1394: Host added: ID:BUS[0-00:1023] GUID[718b5000000000a2] [ 5.350941] Adding 4882424k swap on /dev/sda1. Priority:-1 extents:1 across:4882424k [ 5.871182] udev: starting version 151 [ 6.833409] type=1505 audit(1351541345.001:2): operation="profile_load" pid=518 name="/sbin/dhclient3" [ 6.834324] type=1505 audit(1351541345.001:3): operation="profile_load" pid=518 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 6.834835] type=1505 audit(1351541345.001:4): operation="profile_load" pid=518 name="/usr/lib/connman/scripts/dhclient-script" [ 7.148986] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.689608] irda_init() [ 7.689634] NET: Registered protocol family 23 [ 7.708912] parport_pc 00:05: reported by Plug and Play ACPI [ 7.708968] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 7.722140] lp: driver loaded but no devices found [ 7.778060] Detected unconfigured HP nc8000 family SMSC IrDA chip, pre-configuring device. [ 7.778066] Setting up Intel 82801 controller and SMSC device [ 7.778085] Detected Chip id: 0x5a, setting up registers... [ 7.778232] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x004e): LPC47N227 [ 7.778250] smsc_superio_flat(): fir: 0x130, sir: 0x2f8, dma: 03, irq: 5, mode: 0x0e [ 7.778266] SMsC IrDA Controller found [ 7.778267] IrCC version 2.0, firport 0x130, sirport 0x2f8 dma=3, irq=5 [ 7.778326] smsc_ircc_set_sir_speed(), Setting speed to: 9600 [ 7.778339] No transceiver found. Defaulting to Fast pin select [ 7.781487] IrDA: Registered device irda0 [ 7.804309] lp0: using parport0 (interrupt-driven). [ 7.805411] tpm_inf_pnp 00:0c: Found C199 with ID IFX0101 [ 7.805451] tpm_inf_pnp 00:0c: TPM found: config base 0xe0, data base 0x1400, chip version 0x0006, vendor id 0x15d1 (Infineon), product id 0x0006 (SLD 9630 TT 1.1) [ 7.870584] lib80211: common routines for IEEE802.11 drivers [ 7.870590] lib80211_crypt: registered algorithm 'NULL' [ 7.890464] intel_rng: FWH not detected [ 7.899184] ppdev: user-space parallel port driver [ 7.922891] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 7.922897] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 7.986873] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:088c] [ 7.986897] yenta_cardbus 0000:02:06.0: O2: res at 0x94/0xD4: ea/00 [ 7.986901] yenta_cardbus 0000:02:06.0: O2: enabling read prefetch/write burst [ 8.056631] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 [ 8.056637] ipw2100: Copyright(c) 2003-2006 Intel Corporation [ 8.112607] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0038, PCI irq 10 [ 8.112614] yenta_cardbus 0000:02:06.0: Socket status: 30000006 [ 8.112625] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff [ 8.112631] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x5fff: clean. [ 8.113394] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff [ 8.113399] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x8dffffff [ 8.114645] ACPI: PCI Interrupt Link [C0C8] enabled at IRQ 11 [ 8.114653] ipw2100 0000:02:04.0: PCI INT A -> Link[C0C8] -> GSI 11 (level, low) -> IRQ 11 [ 8.115365] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection [ 8.115389] ipw2100 0000:02:04.0: firmware: requesting ipw2100-1.3.fw [ 8.498004] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x1b6eb1, caps: 0xa84793/0x100000 [ 8.498013] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 8.542637] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 8.588419] yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:088c] [ 8.716485] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0038, PCI irq 10 [ 8.716491] yenta_cardbus 0000:02:06.1: Socket status: 30000006 [ 8.716498] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #05 to #08 [ 8.716511] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff [ 8.716517] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x5fff: clean. [ 8.717281] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff [ 8.717286] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x8dffffff [ 8.718027] yenta_cardbus 0000:02:06.3: CardBus bridge found [103c:088c] [ 8.844516] yenta_cardbus 0000:02:06.3: ISA IRQ mask 0x0038, PCI irq 10 [ 8.844523] yenta_cardbus 0000:02:06.3: Socket status: 30000006 [ 8.844529] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #08 to #0c [ 8.844543] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x5fff [ 8.844549] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x4000-0x5fff: clean. [ 8.845313] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x903fffff [ 8.845318] yenta_cardbus 0000:02:06.3: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x8dffffff [ 9.285395] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 9.287141] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 9.289252] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 9.291008] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean. [ 9.291757] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 9.292754] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 9.293632] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 9.295429] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 9.296483] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 9.297365] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 9.857472] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af: clean. [ 9.859251] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff: clean. [ 9.860004] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff: clean. [ 9.861092] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7: clean. [ 9.861977] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xa00-0xaff: clean. [ 10.137875] Intel ICH 0000:00:1f.5: power state changed by ACPI to D0 [ 10.137892] Intel ICH 0000:00:1f.5: PCI INT B -> Link[C0C4] -> GSI 11 (level, low) -> IRQ 11 [ 10.137947] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 11.064081] intel8x0_measure_ac97_clock: measured 55391 usecs (2669 samples) [ 11.064086] intel8x0: clocking to 48000 [ 11.604177] psmouse serio5: ID: 10 00 64 [ 12.069946] type=1505 audit(1351541350.237:5): operation="profile_load" pid=845 name="/usr/share/gdm/guest-session/Xsession" [ 12.079317] type=1505 audit(1351541350.245:6): operation="profile_replace" pid=851 name="/sbin/dhclient3" [ 12.082983] type=1505 audit(1351541350.249:7): operation="profile_replace" pid=851 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.083593] type=1505 audit(1351541350.249:8): operation="profile_replace" pid=851 name="/usr/lib/connman/scripts/dhclient-script" [ 12.833910] type=1505 audit(1351541351.001:9): operation="profile_load" pid=852 name="/usr/bin/evince" [ 12.847508] type=1505 audit(1351541351.013:10): operation="profile_load" pid=852 name="/usr/bin/evince-previewer" [ 12.855211] type=1505 audit(1351541351.021:11): operation="profile_load" pid=852 name="/usr/bin/evince-thumbnailer" [ 12.898889] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.901959] tg3 0000:02:0e.0: firmware: requesting tigon/tg3_tso5.bin [ 13.321532] type=1505 audit(1351541351.489:12): operation="profile_load" pid=860 name="/usr/lib/cups/backend/cups-pdf" [ 13.322653] type=1505 audit(1351541351.489:13): operation="profile_load" pid=860 name="/usr/sbin/cupsd" [ 13.329160] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.371887] type=1505 audit(1351541351.537:14): operation="profile_load" pid=927 name="/usr/sbin/tcpdump" [ 15.067218] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input8 [ 24.081080] ttyS2: LSR safety check engaged! [ 24.086761] ttyS0: LSR safety check engaged! [ 39.308335] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 50.044019] eth1: no IPv6 routers present [ 77.366273] lib80211_crypt: registered algorithm 'CCMP' [ 77.435378] padlock: VIA PadLock not detected. [ 77.459147] lib80211_crypt: registered algorithm 'TKIP' [ 86.954325] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT AVAILABLE/ENABLED. [ 87.554875] halcmd[1628]: segfault at 8 ip 004916bc sp bf91af50 error 6 in liblinuxcnchal.so.0[48c000+8000] [ 87.558538] halcmd[1629]: segfault at 8 ip 00d126bc sp bf9440e0 error 6 in liblinuxcnchal.so.0[d0d000+8000] [ 87.573189] halcmd[1632]: segfault at 8 ip 003c46bc sp bfcffed0 error 6 in liblinuxcnchal.so.0[3bf000+8000] [ 87.805172] halcmd[1636]: segfault at 8 ip 00e946bc sp bff00e60 error 6 in liblinuxcnchal.so.0[e8f000+8000] [ 88.013295] halcmd[1640]: segfault at 8 ip 00aae6bc sp bf819330 error 6 in liblinuxcnchal.so.0[aa9000+8000] [ 88.221736] halcmd[1644]: segfault at 8 ip 0089c6bc sp bfbaa880 error 6 in liblinuxcnchal.so.0[897000+8000] [ 88.430111] halcmd[1648]: segfault at 8 ip 001fc6bc sp bfaa48f0 error 6 in liblinuxcnchal.so.0[1f7000+8000] [ 88.638733] halcmd[1652]: segfault at 8 ip 00f086bc sp bfce2100 error 6 in liblinuxcnchal.so.0[f03000+8000] [ 88.848714] halcmd[1656]: segfault at 8 ip 00da36bc sp bf809320 error 6 in liblinuxcnchal.so.0[d9e000+8000] [ 89.057229] halcmd[1660]: segfault at 8 ip 0022e6bc sp bfae8b10 error 6 in liblinuxcnchal.so.0[229000+8000] [ 99.126307] ttyS0: LSR safety check engaged! [ 99.126328] __ratelimit: 2 callbacks suppressed [ 99.126332] type=1503 audit(1351541437.293:15): operation="capable" pid=1722 parent=1714 profile="/usr/sbin/cupsd" name="sys_admin" [ 99.126477] ttyS2: LSR safety check engaged! [ 319.719043] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT AVAILABLE/ENABLED. [ 320.091155] halcmd[1909]: segfault at 8 ip 00cdb6bc sp bfa75310 error 6 in liblinuxcnchal.so.0[cd6000+8000] [ 320.094975] halcmd[1910]: segfault at 8 ip 00bc96bc sp bfc11410 error 6 in liblinuxcnchal.so.0[bc4000+8000] [ 320.103015] halcmd[1913]: segfault at 8 ip 00b9f6bc sp bf99bfd0 error 6 in liblinuxcnchal.so.0[b9a000+8000] [ 320.311543] halcmd[1917]: segfault at 8 ip 009926bc sp bfa5a410 error 6 in liblinuxcnchal.so.0[98d000+8000] [ 320.520010] halcmd[1921]: segfault at 8 ip 0096f6bc sp bfc40650 error 6 in liblinuxcnchal.so.0[96a000+8000] [ 320.728324] halcmd[1925]: segfault at 8 ip 0088e6bc sp bfd0d630 error 6 in liblinuxcnchal.so.0[889000+8000] [ 320.936569] halcmd[1929]: segfault at 8 ip 009706bc sp bf97d420 error 6 in liblinuxcnchal.so.0[96b000+8000] [ 321.145688] halcmd[1933]: segfault at 8 ip 00ce26bc sp bfc04260 error 6 in liblinuxcnchal.so.0[cdd000+8000] [ 321.354154] halcmd[1937]: segfault at 8 ip 00f8e6bc sp bf9e18e0 error 6 in liblinuxcnchal.so.0[f89000+8000] [ 480.772049] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 480.907632] usb 1-2: configuration #1 chosen from 1 choice [ 481.007650] Initializing USB Mass Storage driver... [ 481.007816] scsi2 : SCSI emulation for USB Mass Storage devices [ 481.008068] usbcore: registered new interface driver usb-storage [ 481.008073] USB Mass Storage support registered. [ 481.017039] usb-storage: device found at 3 [ 481.017044] usb-storage: waiting for device to settle before scanning [ 486.016341] usb-storage: device scan complete [ 486.017059] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 486.019888] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 487.169097] sd 2:0:0:0: [sdb] 8060928 512-byte logical blocks: (4.12 GB/3.84 GiB) [ 487.169583] sd 2:0:0:0: [sdb] Write Protect is off [ 487.169588] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 487.169592] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 487.173711] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 487.173720] sdb: sdb1 [ 487.178341] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 487.178350] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 502.486283] usb 1-2: USB disconnect, address 3 [ 846.704473] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT AVAILABLE/ENABLED. [ 847.048286] __ratelimit: 3 callbacks suppressed [ 847.048293] halcmd[2162]: segfault at 8 ip 00b4a6bc sp bfc393f0 error 6 in liblinuxcnchal.so.0[b45000+8000] [ 847.051602] halcmd[2163]: segfault at 8 ip 006796bc sp bfec8ad0 error 6 in liblinuxcnchal.so.0[674000+8000] [ 847.060552] halcmd[2166]: segfault at 8 ip 00aea6bc sp bfb0b820 error 6 in liblinuxcnchal.so.0[ae5000+8000] [ 847.268732] halcmd[2170]: segfault at 8 ip 00ecb6bc sp bff503a0 error 6 in liblinuxcnchal.so.0[ec6000+8000] [ 847.477081] halcmd[2174]: segfault at 8 ip 005006bc sp bfc8f1f0 error 6 in liblinuxcnchal.so.0[4fb000+8000] [ 847.685214] halcmd[2178]: segfault at 8 ip 008ef6bc sp bfe85c00 error 6 in liblinuxcnchal.so.0[8ea000+8000] [ 847.893371] halcmd[2182]: segfault at 8 ip 001196bc sp bfbf98c0 error 6 in liblinuxcnchal.so.0[114000+8000] [ 848.101485] halcmd[2186]: segfault at 8 ip 0033a6bc sp bfebbd70 error 6 in liblinuxcnchal.so.0[335000+8000] [ 848.313603] halcmd[2190]: segfault at 8 ip 0072f6bc sp bfb238a0 error 6 in liblinuxcnchal.so.0[72a000+8000] [ 848.522048] halcmd[2194]: segfault at 8 ip 003276bc sp bfb2e390 error 6 in liblinuxcnchal.so.0[322000+8000] [ 2170.136057] usb 1-2: new high speed USB device using ehci_hcd and address 4 [ 2170.271133] usb 1-2: configuration #1 chosen from 1 choice [ 2170.273391] scsi3 : SCSI emulation for USB Mass Storage devices [ 2170.288157] usb-storage: device found at 4 [ 2170.288161] usb-storage: waiting for device to settle before scanning [ 2175.288243] usb-storage: device scan complete [ 2175.288973] scsi 3:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 2175.293738] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 2175.486787] sd 3:0:0:0: [sdb] 8060928 512-byte logical blocks: (4.12 GB/3.84 GiB) [ 2175.487264] sd 3:0:0:0: [sdb] Write Protect is off [ 2175.487269] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 2175.487273] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 2175.490766] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 2175.490774] sdb: sdb1 [ 2175.495162] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 2175.495171] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 2187.207759] usb 1-2: USB disconnect, address 4 [ 2588.389283] RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT AVAILABLE/ENABLED. [ 2588.733953] __ratelimit: 2 callbacks suppressed [ 2588.733960] halcmd[2441]: segfault at 8 ip 00e446bc sp bfeca510 error 6 in liblinuxcnchal.so.0[e3f000+8000] [ 2588.737772] halcmd[2442]: segfault at 8 ip 007086bc sp bfb5dad0 error 6 in liblinuxcnchal.so.0[703000+8000] [ 2588.745888] halcmd[2445]: segfault at 8 ip 004c86bc sp bf8169d0 error 6 in liblinuxcnchal.so.0[4c3000+8000] [ 2588.954484] halcmd[2449]: segfault at 8 ip 008556bc sp bfaaf8d0 error 6 in liblinuxcnchal.so.0[850000+8000] [ 2589.164696] halcmd[2453]: segfault at 8 ip 001df6bc sp bfb13cb0 error 6 in liblinuxcnchal.so.0[1da000+8000] [ 2589.373969] halcmd[2457]: segfault at 8 ip 005496bc sp bf988b70 error 6 in liblinuxcnchal.so.0[544000+8000] [ 2589.582589] halcmd[2461]: segfault at 8 ip 0094b6bc sp bf95dfd0 error 6 in liblinuxcnchal.so.0[946000+8000] [ 2589.792151] halcmd[2465]: segfault at 8 ip 00cc56bc sp bfc83130 error 6 in liblinuxcnchal.so.0[cc0000+8000] [ 2590.001090] halcmd[2469]: segfault at 8 ip 001ad6bc sp bf99d3d0 error 6 in liblinuxcnchal.so.0[1a8000+8000] [ 2590.210485] halcmd[2473]: segfault at 8 ip 002106bc sp bfa48490 error 6 in liblinuxcnchal.so.0[20b000+8000]