[ 0.000000] Linux version 4.14.174-rtai-amd64 (rmurphy@ThinkPad-T530) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #1 SMP PREEMPT Sun Mar 22 10:39:58 AEDT 2020 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.14.174-rtai-amd64 root=UUID=83eec539-7ac0-4053-89ef-05fdb20f6c44 ro quiet splash vt.handoff=1 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007b9a133f] usable [ 0.000000] BIOS-e820: [mem 0x000000007b9a1340-0x000000007b9a339f] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007b9a33a0-0x000000007dffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: Hewlett-Packard HP Compaq dc7900 Convertible Minitower/3032h, BIOS 786G1 v01.27 10/22/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7b9a1 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-EFFFF write-back [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07BA00000 mask FFFE00000 uncachable [ 0.000000] 2 base 07BC00000 mask FFFC00000 uncachable [ 0.000000] 3 base 07C000000 mask FFC000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] Base memory trampoline at [ffff888000099000] 99000 size 24576 [ 0.000000] BRK [0x01e2f000, 0x01e2ffff] PGTABLE [ 0.000000] BRK [0x01e30000, 0x01e30fff] PGTABLE [ 0.000000] BRK [0x01e31000, 0x01e31fff] PGTABLE [ 0.000000] BRK [0x01e32000, 0x01e32fff] PGTABLE [ 0.000000] BRK [0x01e33000, 0x01e33fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3451b000-0x36284fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000E5810 000014 (v00 COMPAQ) [ 0.000000] ACPI: RSDT 0x000000007B9C5440 000044 (v01 HPQOEM SLIC-BPC 20151022 00000000) [ 0.000000] ACPI: FACP 0x000000007B9C54E8 000074 (v01 COMPAQ EAGLLAKE 00000001 00000000) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Address but zero Length: 0x0000000000000050/0x0 (20170728/tbfadt-658) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20170728/tbfadt-708) [ 0.000000] ACPI: DSDT 0x000000007B9C5A27 00A273 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS 0x000000007B9C5400 000040 [ 0.000000] ACPI: APIC 0x000000007B9C555C 000084 (v01 COMPAQ EAGLLAKE 00000001 00000000) [ 0.000000] ACPI: ASF! 0x000000007B9C55E0 000063 (v32 COMPAQ EAGLLAKE 00000001 00000000) [ 0.000000] ACPI: MCFG 0x000000007B9C5643 00003C (v01 COMPAQ EAGLLAKE 00000001 00000000) [ 0.000000] ACPI: TCPA 0x000000007B9C567F 000032 (v01 COMPAQ EAGLLAKE 00000001 00000000) [ 0.000000] ACPI: SLIC 0x000000007B9C56B1 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000) [ 0.000000] ACPI: HPET 0x000000007B9C5827 000038 (v01 COMPAQ EAGLLAKE 00000001 00000000) [ 0.000000] ACPI: DMAR 0x000000007B9C585F 0001C8 (v01 COMPAQ EAGLLAKE 00000001 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007b9a0fff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007b9a0fff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007b9a0fff] [ 0.000000] On node 0 totalpages: 506175 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7847 pages used for memmap [ 0.000000] DMA32 zone: 502177 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007dffffff [ 0.000000] ACPI: PM-Timer IO Port: 0xf808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0x7e000000-0xf3ffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 60 pages/cpu s205336 r8192 d32232 u1048576 [ 0.000000] pcpu-alloc: s205336 r8192 d32232 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 498243 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.174-rtai-amd64 root=UUID=83eec539-7ac0-4053-89ef-05fdb20f6c44 ro quiet splash vt.handoff=1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 1943540K/2024700K available (8200K kernel code, 363K rwdata, 1552K rodata, 932K init, 868K bss, 81160K reserved, 0K cma-reserved) [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x47/0xf0 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16 [ 0.000000] Interrupt pipeline (release #8) [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 2992.275 MHz processor [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.55 BogoMIPS (lpj=11969100) [ 0.004000] pid_max: default: 32768 minimum: 301 [ 0.004000] ACPI: Core revision 20170728 [ 0.009984] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.010028] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.010042] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.010240] CPU0: Thermal monitoring enabled (TM2) [ 0.010243] process: using mwait in idle threads [ 0.010247] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.010248] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.010250] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.010252] Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available! [ 0.010253] Speculative Store Bypass: Vulnerable [ 0.010259] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.010316] Freeing SMP alternatives memory: 20K [ 0.012085] smpboot: Max logical packages: 2 [ 0.012435] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.161786] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (family: 0x6, model: 0x17, stepping: 0xa) [ 0.176008] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.176019] ... version: 2 [ 0.176020] ... bit width: 40 [ 0.176021] ... generic registers: 2 [ 0.176023] ... value mask: 000000ffffffffff [ 0.176024] ... max period: 000000007fffffff [ 0.176025] ... fixed-purpose events: 3 [ 0.176026] ... event mask: 0000000700000003 [ 0.184003] Hierarchical SRCU implementation. [ 0.208003] smp: Bringing up secondary CPUs ... [ 0.240010] x86: Booting SMP configuration: [ 0.240012] .... node #0, CPUs: #1 [ 0.243483] smp: Brought up 1 node, 2 CPUs [ 0.243483] smpboot: Total of 2 processors activated (11969.10 BogoMIPS) [ 0.244135] devtmpfs: initialized [ 0.244135] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.244135] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.244135] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.244135] pinctrl core: initialized pinctrl subsystem [ 0.244158] NET: Registered protocol family 16 [ 0.244301] ACPI: bus type PCI registered [ 0.244343] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.244345] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.244352] PCI: Using configuration type 1 for base access [ 0.244373] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.244373] mtrr: probably your BIOS does not setup all CPUs. [ 0.244373] mtrr: corrected configuration. [ 0.244492] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.244492] ACPI: Added _OSI(Module Device) [ 0.244492] ACPI: Added _OSI(Processor Device) [ 0.244492] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.244492] ACPI: Added _OSI(Processor Aggregator Device) [ 0.248680] ACPI: Dynamic OEM Table Load: [ 0.248685] ACPI: SSDT 0xFFFF888078DC7400 0002B0 (v01 COMPAQ CST 00000001 MSFT 0100000E) [ 0.249085] ACPI: Interpreter enabled [ 0.249090] ACPI: (supports S0 S5) [ 0.249091] ACPI: Using IOAPIC for interrupt routing [ 0.249109] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.249279] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.253684] acpi LNXCPU:00: Invalid PBLK length [7] [ 0.253694] acpi LNXCPU:01: Invalid PBLK length [7] [ 0.253802] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.253805] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI] [ 0.253809] ACPI BIOS Error (bug): \_SB.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20170728/nsarguments-198) [ 0.253851] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20170728/dsfield-212) [ 0.253858] ACPI Error: Method parse/execution failed \_SB.PCI0._OSC, AE_ALREADY_EXISTS (20170728/psparse-550) [ 0.253869] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS) [ 0.253872] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.253979] PCI host bridge to bus 0000:00 [ 0.253981] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff window] [ 0.253982] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.253983] pci_bus 0000:00: root bus resource [io 0x1000-0x2fff window] [ 0.253985] pci_bus 0000:00: root bus resource [io 0x3000-0x6fff window] [ 0.253986] pci_bus 0000:00: root bus resource [io 0x7000-0xafff window] [ 0.253987] pci_bus 0000:00: root bus resource [io 0xb000-0xffff window] [ 0.253989] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.253990] pci_bus 0000:00: root bus resource [mem 0x7e000000-0xf3ffffff window] [ 0.253992] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.253999] pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000 [ 0.254078] pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000 [ 0.254087] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.254092] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.254095] pci 0000:00:02.0: reg 0x20: [io 0x2230-0x2237] [ 0.254167] pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000 [ 0.254174] pci 0000:00:02.1: reg 0x10: [mem 0xf0400000-0xf04fffff 64bit] [ 0.254248] pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000 [ 0.254271] pci 0000:00:03.0: reg 0x10: [mem 0xf052a000-0xf052a00f 64bit] [ 0.254355] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.254413] pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185 [ 0.254427] pci 0000:00:03.2: reg 0x10: [io 0x2238-0x223f] [ 0.254433] pci 0000:00:03.2: reg 0x14: [io 0x2260-0x2263] [ 0.254438] pci 0000:00:03.2: reg 0x18: [io 0x2240-0x2247] [ 0.254445] pci 0000:00:03.2: reg 0x1c: [io 0x2264-0x2267] [ 0.254451] pci 0000:00:03.2: reg 0x20: [io 0x2220-0x222f] [ 0.254534] pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002 [ 0.254546] pci 0000:00:03.3: reg 0x10: [io 0x2248-0x224f] [ 0.254552] pci 0000:00:03.3: reg 0x14: [mem 0xf0524000-0xf0524fff] [ 0.254705] pci 0000:00:19.0: [8086:10de] type 00 class 0x020000 [ 0.254720] pci 0000:00:19.0: reg 0x10: [mem 0xf0500000-0xf051ffff] [ 0.254727] pci 0000:00:19.0: reg 0x14: [mem 0xf0525000-0xf0525fff] [ 0.254733] pci 0000:00:19.0: reg 0x18: [io 0x2100-0x211f] [ 0.254781] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.254842] pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300 [ 0.254878] pci 0000:00:1a.0: reg 0x20: [io 0x2120-0x213f] [ 0.254968] pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300 [ 0.255004] pci 0000:00:1a.1: reg 0x20: [io 0x2140-0x215f] [ 0.255092] pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300 [ 0.255128] pci 0000:00:1a.2: reg 0x20: [io 0x2160-0x217f] [ 0.255220] pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320 [ 0.255238] pci 0000:00:1a.7: reg 0x10: [mem 0xf0527000-0xf05273ff] [ 0.255307] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.255371] pci 0000:00:1b.0: [8086:3a6e] type 00 class 0x040300 [ 0.255388] pci 0000:00:1b.0: reg 0x10: [mem 0xf0520000-0xf0523fff 64bit] [ 0.255446] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.255512] pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400 [ 0.255571] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.255638] pci 0000:00:1c.4: [8086:3a78] type 01 class 0x060400 [ 0.255698] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.255765] pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300 [ 0.255801] pci 0000:00:1d.0: reg 0x20: [io 0x2180-0x219f] [ 0.255889] pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300 [ 0.255925] pci 0000:00:1d.1: reg 0x20: [io 0x21a0-0x21bf] [ 0.256022] pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300 [ 0.256059] pci 0000:00:1d.2: reg 0x20: [io 0x21c0-0x21df] [ 0.256151] pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320 [ 0.256169] pci 0000:00:1d.7: reg 0x10: [mem 0xf0528000-0xf05283ff] [ 0.256239] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.256300] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.256399] pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100 [ 0.256544] pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601 [ 0.256559] pci 0000:00:1f.2: reg 0x10: [io 0x2250-0x2257] [ 0.256565] pci 0000:00:1f.2: reg 0x14: [io 0x2268-0x226b] [ 0.256571] pci 0000:00:1f.2: reg 0x18: [io 0x2258-0x225f] [ 0.256577] pci 0000:00:1f.2: reg 0x1c: [io 0x226c-0x226f] [ 0.256583] pci 0000:00:1f.2: reg 0x20: [io 0x21e0-0x21ff] [ 0.256589] pci 0000:00:1f.2: reg 0x24: [mem 0xf0526000-0xf05267ff] [ 0.256621] pci 0000:00:1f.2: PME# supported from D3hot [ 0.256706] pci 0000:00:1c.0: PCI bridge to [bus 20] [ 0.256740] pci 0000:00:1c.4: PCI bridge to [bus 30] [ 0.256773] pci 0000:07:04.0: [1c00:2170] type 00 class 0x070101 [ 0.256789] pci 0000:07:04.0: reg 0x10: [io 0x1110-0x1117] [ 0.256798] pci 0000:07:04.0: reg 0x14: [io 0x1118-0x111f] [ 0.256879] pci 0000:07:09.0: [1c00:2170] type 00 class 0x070101 [ 0.256895] pci 0000:07:09.0: reg 0x10: [io 0x1120-0x1127] [ 0.256903] pci 0000:07:09.0: reg 0x14: [io 0x1128-0x112f] [ 0.256982] pci 0000:07:0b.0: [1095:3512] type 00 class 0x010400 [ 0.256997] pci 0000:07:0b.0: reg 0x10: [io 0x0000-0x0007] [ 0.257003] pci 0000:07:0b.0: reg 0x14: [io 0x0000-0x0003] [ 0.257009] pci 0000:07:0b.0: reg 0x18: [io 0x0000-0x0007] [ 0.257015] pci 0000:07:0b.0: reg 0x1c: [io 0x0000-0x0003] [ 0.257021] pci 0000:07:0b.0: reg 0x20: [io 0x0000-0x000f] [ 0.257027] pci 0000:07:0b.0: reg 0x24: [mem 0x00000000-0x000001ff] [ 0.257033] pci 0000:07:0b.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.257057] pci 0000:07:0b.0: supports D1 D2 [ 0.257103] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 0.257106] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.257109] pci 0000:00:1e.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.257113] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfebfffff window] (subtractive decode) [ 0.257114] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.257116] pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff window] (subtractive decode) [ 0.257117] pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff window] (subtractive decode) [ 0.257119] pci 0000:00:1e.0: bridge window [io 0x7000-0xafff window] (subtractive decode) [ 0.257120] pci 0000:00:1e.0: bridge window [io 0xb000-0xffff window] (subtractive decode) [ 0.257121] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.257123] pci 0000:00:1e.0: bridge window [mem 0x7e000000-0xf3ffffff window] (subtractive decode) [ 0.257135] pci_bus 0000:00: on NUMA node 0 [ 0.257360] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15) [ 0.257412] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.257464] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.257515] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.257566] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.257616] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15) [ 0.257667] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15) [ 0.257718] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.257852] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.257852] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.257852] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.257852] vgaarb: loaded [ 0.257852] EDAC MC: Ver: 3.0.0 [ 0.257852] PCI: Using ACPI for IRQ routing [ 0.257852] PCI: pci_cache_line_size set to 64 bytes [ 0.257852] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.257852] e820: reserve RAM buffer [mem 0x7b9a1340-0x7bffffff] [ 0.257948] HPET: 8 timers in total, 2 timers will be used for per-cpu timer [ 0.257953] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 0, 0, 0, 0 [ 0.257960] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.261022] hpet: hpet2 irq 24 for MSI [ 0.261031] hpet: hpet3 irq 25 for MSI [ 0.261031] clocksource: Switched to clocksource hpet [ 0.261031] VFS: Disk quotas dquot_6.6.0 [ 0.261031] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.261031] pnp: PnP ACPI init [ 0.261031] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.261031] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.261031] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.261031] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 PNP0500 (disabled) [ 0.261031] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.261031] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.261031] system 00:05: [io 0x0cb0-0x0cbf] has been reserved [ 0.261031] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.261031] system 00:06: [io 0x0400-0x041f] has been reserved [ 0.261031] system 00:06: [io 0x0420-0x043f] has been reserved [ 0.261031] system 00:06: [io 0x0440-0x045f] has been reserved [ 0.261031] system 00:06: [io 0x0460-0x047f] has been reserved [ 0.261031] system 00:06: [io 0x0800-0x087f] has been reserved [ 0.261031] system 00:06: [io 0x0880-0x08ff] has been reserved [ 0.261031] system 00:06: [io 0xf800-0xf81f] has been reserved [ 0.261031] system 00:06: [io 0xf820-0xf83f] has been reserved [ 0.261031] system 00:06: [io 0xf840-0xf85f] has been reserved [ 0.261031] system 00:06: [io 0xf860-0xf87f] has been reserved [ 0.261031] system 00:06: [io 0xfa00-0xfa3f] has been reserved [ 0.261031] system 00:06: [io 0xfc00-0xfc7f] has been reserved [ 0.261031] system 00:06: [io 0xfc80-0xfcff] has been reserved [ 0.261031] system 00:06: [io 0xfe00-0xfe7f] has been reserved [ 0.261031] system 00:06: [io 0xfe80-0xfeff] has been reserved [ 0.261031] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.261031] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.261031] system 00:07: [mem 0x00100000-0x7dffffff] could not be reserved [ 0.261031] system 00:07: [mem 0x000e4000-0x000fffff] could not be reserved [ 0.261031] system 00:07: [mem 0xfec01000-0xfecfffff] has been reserved [ 0.261031] system 00:07: [mem 0xfed00400-0xfed3ffff] has been reserved [ 0.261031] system 00:07: [mem 0xfed40000-0xffffffff] could not be reserved [ 0.261031] system 00:07: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.261031] system 00:07: [mem 0x000cc800-0x000e3fff] has been reserved [ 0.261031] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.261031] pnp: PnP ACPI: found 8 devices [ 0.266304] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.266313] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 20] add_size 1000 [ 0.266316] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000 add_align 100000 [ 0.266318] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 20] add_size 200000 add_align 100000 [ 0.266324] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 30] add_size 1000 [ 0.266326] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000 add_align 100000 [ 0.266328] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 30] add_size 200000 add_align 100000 [ 0.266338] pci 0000:00:1c.0: BAR 8: assigned [mem 0xf8000000-0xf81fffff] [ 0.266342] pci 0000:00:1c.0: BAR 9: assigned [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.266344] pci 0000:00:1c.4: BAR 8: assigned [mem 0xf8400000-0xf85fffff] [ 0.266347] pci 0000:00:1c.4: BAR 9: assigned [mem 0xf8600000-0xf87fffff 64bit pref] [ 0.266349] pci 0000:00:1c.0: BAR 7: assigned [io 0x3000-0x3fff] [ 0.266351] pci 0000:00:1c.4: BAR 7: assigned [io 0x4000-0x4fff] [ 0.266354] pci 0000:00:1c.0: PCI bridge to [bus 20] [ 0.266356] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.266359] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff] [ 0.266362] pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.266366] pci 0000:00:1c.4: PCI bridge to [bus 30] [ 0.266368] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.266372] pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf85fffff] [ 0.266375] pci 0000:00:1c.4: bridge window [mem 0xf8600000-0xf87fffff 64bit pref] [ 0.266380] pci 0000:07:0b.0: BAR 6: assigned [mem 0xf0600000-0xf067ffff pref] [ 0.266382] pci 0000:07:0b.0: BAR 5: assigned [mem 0xf0680000-0xf06801ff] [ 0.266386] pci 0000:07:0b.0: BAR 4: assigned [io 0x1000-0x100f] [ 0.266389] pci 0000:07:0b.0: BAR 0: assigned [io 0x1010-0x1017] [ 0.266392] pci 0000:07:0b.0: BAR 2: assigned [io 0x1018-0x101f] [ 0.266396] pci 0000:07:0b.0: BAR 1: assigned [io 0x1020-0x1023] [ 0.266399] pci 0000:07:0b.0: BAR 3: assigned [io 0x1024-0x1027] [ 0.266403] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 0.266405] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff] [ 0.266408] pci 0000:00:1e.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.266414] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfebfffff window] [ 0.266415] pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7 window] [ 0.266417] pci_bus 0000:00: resource 6 [io 0x1000-0x2fff window] [ 0.266418] pci_bus 0000:00: resource 7 [io 0x3000-0x6fff window] [ 0.266419] pci_bus 0000:00: resource 8 [io 0x7000-0xafff window] [ 0.266421] pci_bus 0000:00: resource 9 [io 0xb000-0xffff window] [ 0.266422] pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff window] [ 0.266424] pci_bus 0000:00: resource 11 [mem 0x7e000000-0xf3ffffff window] [ 0.266425] pci_bus 0000:20: resource 0 [io 0x3000-0x3fff] [ 0.266427] pci_bus 0000:20: resource 1 [mem 0xf8000000-0xf81fffff] [ 0.266428] pci_bus 0000:20: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref] [ 0.266429] pci_bus 0000:30: resource 0 [io 0x4000-0x4fff] [ 0.266431] pci_bus 0000:30: resource 1 [mem 0xf8400000-0xf85fffff] [ 0.266432] pci_bus 0000:30: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref] [ 0.266434] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] [ 0.266435] pci_bus 0000:07: resource 1 [mem 0xf0600000-0xf06fffff] [ 0.266436] pci_bus 0000:07: resource 4 [mem 0xf8000000-0xfebfffff window] [ 0.266438] pci_bus 0000:07: resource 5 [io 0x0000-0x0cf7 window] [ 0.266439] pci_bus 0000:07: resource 6 [io 0x1000-0x2fff window] [ 0.266440] pci_bus 0000:07: resource 7 [io 0x3000-0x6fff window] [ 0.266442] pci_bus 0000:07: resource 8 [io 0x7000-0xafff window] [ 0.266443] pci_bus 0000:07: resource 9 [io 0xb000-0xffff window] [ 0.266444] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff window] [ 0.266446] pci_bus 0000:07: resource 11 [mem 0x7e000000-0xf3ffffff window] [ 0.266514] NET: Registered protocol family 2 [ 0.266624] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.266653] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.266706] TCP: Hash tables configured (established 16384 bind 16384) [ 0.266735] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.266744] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.266777] NET: Registered protocol family 1 [ 0.266786] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.268370] PCI: CLS 64 bytes, default 64 [ 0.268397] Unpacking initramfs... [ 0.645504] Freeing initrd memory: 30120K [ 0.645927] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.646719] zbud: loaded [ 0.647395] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.647424] io scheduler noop registered [ 0.647425] io scheduler deadline registered [ 0.647446] io scheduler cfq registered (default) [ 0.647447] io scheduler mq-deadline registered [ 0.647448] io scheduler kyber registered [ 0.647499] vesafb: mode is 1600x1200x32, linelength=6400, pages=0 [ 0.647500] vesafb: scrolling: redraw [ 0.647501] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.647515] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 7552k, total 7552k [ 0.694213] Console: switching to colour frame buffer device 200x75 [ 0.740718] fb0: VESA VGA frame buffer device [ 0.740783] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.740787] ACPI: Power Button [PBTN] [ 0.740815] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.740816] ACPI: Power Button [PWRF] [ 0.740868] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.740940] serial 00:03: [irq 4] [ 0.740943] serial 00:03: [io 0x03f8-0x03ff] [ 0.741205] serial 00:03: activated [ 0.761566] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.782014] 0000:00:03.3: ttyS1 at I/O 0x2248 (irq = 17, base_baud = 115200) is a 16550A [ 0.782147] Linux agpgart interface v0.103 [ 0.782377] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 0.785236] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.785254] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.785306] mousedev: PS/2 mouse device common for all mice [ 0.785336] rtc_cmos 00:00: RTC can wake from S4 [ 0.785416] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 0.785436] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.785864] NET: Registered protocol family 10 [ 0.786059] Segment Routing with IPv6 [ 0.786071] mip6: Mobile IPv6 [ 0.786073] NET: Registered protocol family 17 [ 0.786075] mpls_gso: MPLS GSO support [ 0.786133] mce: Using 6 MCE banks [ 0.786149] microcode: sig=0x1067a, pf=0x1, revision=0xa0e [ 0.786181] microcode: Microcode Update Driver: v2.2. [ 0.786187] sched_clock: Marking stable (786177246, 0)->(782389389, 3787857) [ 0.786253] registered taskstats version 1 [ 0.786494] rtc_cmos 00:00: setting system clock to 2020-03-29 12:43:41 UTC (1585485821) [ 0.787295] Freeing unused kernel memory: 932K [ 0.787297] Write protecting the kernel read-only data: 12288k [ 0.788059] Freeing unused kernel memory: 2020K [ 0.789113] Freeing unused kernel memory: 496K [ 0.789182] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.833840] pps_core: LinuxPPS API ver. 1 registered [ 0.833842] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.833990] PTP clock support registered [ 0.834472] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.834473] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.834676] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.837732] ACPI: bus type USB registered [ 0.837763] usbcore: registered new interface driver usbfs [ 0.837772] usbcore: registered new interface driver hub [ 0.837801] usbcore: registered new device driver usb [ 0.837985] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.838124] uhci_hcd: USB Universal Host Controller Interface driver [ 0.840762] ehci-pci: EHCI PCI platform driver [ 0.842257] SCSI subsystem initialized [ 0.844225] libata version 3.00 loaded. [ 0.876014] random: fast init done [ 0.945398] sata_sil 0000:07:0b.0: version 2.4 [ 0.945421] sata_sil 0000:07:0b.0: enabling device (0004 -> 0007) [ 0.945525] sata_sil 0000:07:0b.0: Applying R_ERR on DMA activate FIS errata fix [ 0.949672] scsi host0: sata_sil [ 0.954635] scsi host1: sata_sil [ 0.954660] ata1: SATA max UDMA/100 mmio m512@0xf0680000 tf 0xf0680080 irq 22 [ 0.954662] ata2: SATA max UDMA/100 mmio m512@0xf0680000 tf 0xf06800c0 irq 22 [ 1.032284] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:24:81:15:01:8a [ 1.032288] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.032317] e1000e 0000:00:19.0 eth0: MAC: 8, PHY: 8, PBA No: FFFFFF-0FF [ 1.032458] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.032464] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.032489] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00002120 [ 1.032536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.032538] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.032539] usb usb1: Product: UHCI Host Controller [ 1.032541] usb usb1: Manufacturer: Linux 4.14.174-rtai-amd64 uhci_hcd [ 1.032542] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.032613] hub 1-0:1.0: USB hub found [ 1.032619] hub 1-0:1.0: 2 ports detected [ 1.032787] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.032791] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 1.032814] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002140 [ 1.032854] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.032855] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.032857] usb usb2: Product: UHCI Host Controller [ 1.032858] usb usb2: Manufacturer: Linux 4.14.174-rtai-amd64 uhci_hcd [ 1.032859] usb usb2: SerialNumber: 0000:00:1a.1 [ 1.032917] hub 2-0:1.0: USB hub found [ 1.032923] hub 2-0:1.0: 2 ports detected [ 1.033156] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 1.033161] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 1.033170] ehci-pci 0000:00:1a.7: debug port 1 [ 1.037074] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 1.037078] ehci-pci 0000:00:1a.7: irq 22, io mem 0xf0527000 [ 1.052038] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.052083] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.052084] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.052086] usb usb3: Product: EHCI Host Controller [ 1.052087] usb usb3: Manufacturer: Linux 4.14.174-rtai-amd64 ehci_hcd [ 1.052088] usb usb3: SerialNumber: 0000:00:1a.7 [ 1.052160] hub 3-0:1.0: USB hub found [ 1.052167] hub 3-0:1.0: 6 ports detected [ 1.052474] hub 1-0:1.0: USB hub found [ 1.052480] hub 1-0:1.0: 2 ports detected [ 1.052529] hub 2-0:1.0: USB hub found [ 1.052535] hub 2-0:1.0: 2 ports detected [ 1.052687] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.052691] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 1.052699] ehci-pci 0000:00:1d.7: debug port 1 [ 1.056578] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.056582] ehci-pci 0000:00:1d.7: irq 20, io mem 0xf0528000 [ 1.072075] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.072103] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.072105] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.072106] usb usb4: Product: EHCI Host Controller [ 1.072107] usb usb4: Manufacturer: Linux 4.14.174-rtai-amd64 ehci_hcd [ 1.072109] usb usb4: SerialNumber: 0000:00:1d.7 [ 1.072180] hub 4-0:1.0: USB hub found [ 1.072185] hub 4-0:1.0: 6 ports detected [ 1.072874] scsi host2: ata_generic [ 1.072936] scsi host3: ata_generic [ 1.072959] ata3: PATA max UDMA/100 cmd 0x2238 ctl 0x2260 bmdma 0x2220 irq 18 [ 1.072961] ata4: PATA max UDMA/100 cmd 0x2240 ctl 0x2264 bmdma 0x2228 irq 18 [ 1.072986] ahci 0000:00:1f.2: version 3.0 [ 1.073168] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1f impl SATA mode [ 1.073170] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part sxs [ 1.075572] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 1.078269] scsi host4: ahci [ 1.078341] scsi host5: ahci [ 1.078407] scsi host6: ahci [ 1.078475] scsi host7: ahci [ 1.078543] scsi host8: ahci [ 1.078610] scsi host9: ahci [ 1.078640] ata5: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526100 irq 27 [ 1.078642] ata6: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526180 irq 27 [ 1.078643] ata7: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526200 irq 27 [ 1.078645] ata8: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526280 irq 27 [ 1.078646] ata9: SATA max UDMA/133 abar m2048@0xf0526000 port 0xf0526300 irq 27 [ 1.078647] ata10: DUMMY [ 1.078786] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.078792] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.078812] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00002160 [ 1.078857] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.078859] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.078860] usb usb5: Product: UHCI Host Controller [ 1.078862] usb usb5: Manufacturer: Linux 4.14.174-rtai-amd64 uhci_hcd [ 1.078863] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.078932] hub 5-0:1.0: USB hub found [ 1.078938] hub 5-0:1.0: 2 ports detected [ 1.079102] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.079106] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.079126] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002180 [ 1.079166] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.079167] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.079169] usb usb6: Product: UHCI Host Controller [ 1.079170] usb usb6: Manufacturer: Linux 4.14.174-rtai-amd64 uhci_hcd [ 1.079171] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.079233] hub 6-0:1.0: USB hub found [ 1.079239] hub 6-0:1.0: 2 ports detected [ 1.079397] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.079403] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.079422] uhci_hcd 0000:00:1d.1: irq 21, io base 0x000021a0 [ 1.079461] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.079463] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.079464] usb usb7: Product: UHCI Host Controller [ 1.079465] usb usb7: Manufacturer: Linux 4.14.174-rtai-amd64 uhci_hcd [ 1.079466] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.079528] hub 7-0:1.0: USB hub found [ 1.079533] hub 7-0:1.0: 2 ports detected [ 1.079693] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.079698] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.079716] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000021c0 [ 1.079755] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.079757] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.079758] usb usb8: Product: UHCI Host Controller [ 1.079759] usb usb8: Manufacturer: Linux 4.14.174-rtai-amd64 uhci_hcd [ 1.079761] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.079829] hub 8-0:1.0: USB hub found [ 1.079835] hub 8-0:1.0: 2 ports detected [ 1.270361] ata1: SATA link down (SStatus 0 SControl 310) [ 1.394354] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.395245] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1.395247] ata5.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1.395395] ata5.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 1.395569] ata5.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 1.395571] ata5.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.395574] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.395576] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.396406] ata5.00: ATA-8: ST3250318AS, HP35, max UDMA/100 [ 1.396408] ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.397452] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1.397460] ata5.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1.397617] ata5.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded [ 1.397799] ata5.00: ACPI cmd e3/00:00:00:00:00:a0 (IDLE) succeeded [ 1.397802] ata5.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.397804] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.397806] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.398308] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.398625] ata5.00: configured for UDMA/100 [ 1.400436] ata6.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1.400439] ata6.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1.400441] ata6.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.400443] ata6.00: ATAPI: TSSTcorp CDDVDW TS-H653Z, HD00, max UDMA/100 [ 1.402324] ata7: SATA link down (SStatus 0 SControl 300) [ 1.402341] ata8: SATA link down (SStatus 0 SControl 300) [ 1.402355] ata9: SATA link down (SStatus 0 SControl 300) [ 1.402766] ata6.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1.402768] ata6.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1.402771] ata6.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.402774] ata6.00: configured for UDMA/100 [ 1.556071] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 1.560070] usb 8-1: new low-speed USB device number 2 using uhci_hcd [ 1.582382] ata2: SATA link down (SStatus 0 SControl 310) [ 1.664085] tsc: Refined TSC clocksource calibration: 2992.499 MHz [ 1.664090] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b2297a4c00, max_idle_ns: 440795286487 ns [ 1.758793] usb 8-1: New USB device found, idVendor=046d, idProduct=c063 [ 1.758795] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.758797] usb 8-1: Product: DELL USB Laser Mouse [ 1.758799] usb 8-1: Manufacturer: DELL [ 1.759893] usb 5-1: New USB device found, idVendor=03f0, idProduct=0024 [ 1.759896] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.759898] usb 5-1: Product: HP Basic USB Keyboard [ 1.759900] usb 5-1: Manufacturer: CHICONY [ 1.761339] scsi 4:0:0:0: Direct-Access ATA ST3250318AS HP35 PQ: 0 ANSI: 5 [ 1.762021] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW TS-H653Z HD00 PQ: 0 ANSI: 5 [ 1.762930] hidraw: raw HID events driver (C) Jiri Kosina [ 1.778572] usbcore: registered new interface driver usbhid [ 1.778573] usbhid: USB HID core driver [ 1.779762] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/0003:046D:C063.0001/input/input5 [ 1.779809] hid-generic 0003:046D:C063.0001: input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1d.2-1/input0 [ 1.780016] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/0003:03F0:0024.0002/input/input6 [ 1.804140] sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 1.804150] sd 4:0:0:0: [sda] Write Protect is off [ 1.804152] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.804167] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.836191] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1a.2-1/input0 [ 1.839717] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.839719] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.839878] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 1.841502] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 1.841874] sd 4:0:0:0: [sda] Attached SCSI disk [ 2.688115] clocksource: Switched to clocksource tsc [ 2.943719] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 4.081801] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.170616] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 4.188134] systemd[1]: Detected architecture x86-64. [ 4.199920] systemd[1]: Set hostname to . [ 4.590247] systemd-fstab-generator[191]: Swap not supported, ignoring fstab swap entry for /swapfile. [ 4.900784] random: crng init done [ 5.234214] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 5.234217] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 6.075383] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.075557] systemd[1]: Created slice System Slice. [ 6.075612] systemd[1]: Listening on RPCbind Server Activation Socket. [ 6.103121] systemd[1]: Reached target Swap. [ 6.103230] systemd[1]: Created slice User and Session Slice. [ 6.230118] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro [ 6.513292] lp: driver loaded but no devices found [ 6.664774] systemd-journald[213]: Received request to flush runtime journal from PID 1 [ 6.689465] ppdev: user-space parallel port driver [ 6.769110] RPC: Registered named UNIX socket transport module. [ 6.769111] RPC: Registered udp transport module. [ 6.769112] RPC: Registered tcp transport module. [ 6.769113] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.146403] loop: module loaded [ 8.729333] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 12.963445] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 12.963471] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 13.282559] pci 0000:00:00.0: Intel Q45/Q43 Chipset [ 13.282574] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 13.284266] pci 0000:00:00.0: detected 32768K stolen memory [ 13.284283] [drm] Memory usable by graphics device = 2048M [ 13.284286] checking generic (e0000000 760000) vs hw (e0000000 10000000) [ 13.284288] fb: switching to inteldrmfb from VESA VGA [ 13.284342] Console: switching to colour dummy device 80x25 [ 13.284412] [drm] Replacing VGA console driver [ 13.284451] [drm] ACPI BIOS requests an excessive sleep of 4294967295 ms, using 1500 ms instead [ 13.288089] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 13.288091] [drm] Driver supports precise vblank timestamp query. [ 13.288270] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 13.290138] [drm] RC6 disabled, disabling runtime PM support [ 13.290323] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0 [ 13.290462] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no) [ 13.290544] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 13.364156] fbcon: inteldrmfb (fb0) is primary device [ 13.385432] Console: switching to colour frame buffer device 200x75 [ 13.405973] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 14.830675] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1884A: line_outs=1 (0x12/0x0/0x0/0x0/0x0) type:line [ 14.830677] snd_hda_codec_analog hdaudioC0D0: speaker_outs=1 (0x13/0x0/0x0/0x0/0x0) [ 14.830679] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0) [ 14.830680] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0 [ 14.830682] snd_hda_codec_analog hdaudioC0D0: inputs: [ 14.830683] snd_hda_codec_analog hdaudioC0D0: Mic=0x14 [ 14.830685] snd_hda_codec_analog hdaudioC0D0: Line=0x15 [ 14.840682] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.840824] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.840861] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.840899] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 14.840940] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 17.912745] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 18.084375] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 21.192038] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 21.400275] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 22.904924] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 22.905030] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO [ 22.905061] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 27.383902] fuse init (API version 7.26) [ 30.769725] rfkill: input handler disabled [ 41.498380] I-pipe: head domain RTAI registered. [ 41.498382] RTAI[hal]: mounted. ISOL_CPUS_MASK: 0. [ 41.498384] SYSINFO - # CPUs: 2, TIMER NAME: 'lapic', TIMER IRQ: 4355, TIMER FREQ: 20779689, CLOCK NAME: 'tsc', CLOCK FREQ: 2992275000, CPU FREQ: 2992275000, LINUX TIMER IRQ: 4355. [ 41.613174] RTAI[malloc]: global heap size = 2097152 bytes, . [ 41.613199] kstacks pool size = 524288 bytes [ 41.613200] RTAI[sched]: hard timer type/freq = lapic/20779689(Hz) [ 41.613201] linear timed lists. [ 41.613202] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2992275000 hz. [ 41.613203] RTAI[sched]: timer setup = 48 ns, resched latency = 0 ns. [ 41.656240] USERMODE CHECK: OK. [ 41.656242] USERMODE CHECK PROVIDED (ns): KernelLatency -1, UserLatency -1. [ 1698.205948] stepconf[3274]: segfault at 0 ip 00007f6da42c3ff9 sp 00007ffcbc7bac50 error 4 in libgtk-3.so.0.2200.30[7f6da3fe0000+6f1000]