[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4-9-rtai-686-pae (Debian 3.4.55-4linuxcnc) () (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Debian 3.4.55-4linuxcnc [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. P35-DS3L/P35-DS3L, BIOS F5 09/07/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 100000000 mask FE0000000 write-back [ 0.000000] 3 base 0DFF00000 mask FFFF00000 write-through [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f5120] f5120 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x017f8000-0x017fffff] [ 0.000000] RAMDISK: 36414000 - 37202000 [ 0.000000] ACPI: RSDP 000f6ad0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT dfee3040 00034 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP dfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT dfee3180 049E4 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS dfee0000 00040 [ 0.000000] ACPI: HPET dfee7cc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG dfee7d40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC dfee7bc0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2694MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000dfee0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfee0 [ 0.000000] On node 0 totalpages: 917103 [ 0.000000] free_area_init_node: node 0, pgdat c1498a00, node_mem_map f4814200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 5390 pages used for memmap [ 0.000000] HighMem zone: 684500 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 17 pages/cpu @f77a7000 s48384 r0 d21248 u69632 [ 0.000000] pcpu-alloc: s48384 r0 d21248 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 909937 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-9-rtai-686-pae root=UUID=a1dc731f-eeaa-4250-ba34-2feb0da77e23 ro initrd=/install/gtk/initrd.gz isolcpus=0,1,2,3 acpi_irq_nobalance noirqbalance lapic quiet rootdelay=5 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 7337600 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000dfee0) [ 0.000000] Memory: 3611300k/3668864k available (3495k kernel code, 57112k reserved, 1237k data, 416k init, 2759560k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc14a0000 - 0xc1508000 ( 416 kB) [ 0.000000] .data : 0xc1369d4a - 0xc149f480 (1237 kB) [ 0.000000] .text : 0xc1000000 - 0xc1369d4a (3495 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f3c06000 soft=f3c08000 [ 0.000000] Interrupt pipeline (release #3) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] HPET config register value = 0xFFFFFFFF. Disabling HPET [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2999.963 MHz processor. [ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.92 BogoMIPS (lpj=11999852) [ 0.004006] pid_max: default: 32768 minimum: 301 [ 0.004045] Security Framework initialized [ 0.004049] AppArmor: AppArmor disabled by boot time parameter [ 0.004065] Mount-cache hash table entries: 512 [ 0.004251] Initializing cgroup subsys cpuacct [ 0.004254] Initializing cgroup subsys memory [ 0.004261] Initializing cgroup subsys devices [ 0.004263] Initializing cgroup subsys freezer [ 0.004265] Initializing cgroup subsys net_cls [ 0.004267] Initializing cgroup subsys blkio [ 0.004273] Initializing cgroup subsys perf_event [ 0.004298] CPU: Physical Processor ID: 0 [ 0.004300] CPU: Processor Core ID: 0 [ 0.004302] mce: CPU supports 6 MCE banks [ 0.004308] CPU0: Thermal monitoring enabled (TM1) [ 0.004355] ACPI: Core revision 20120320 [ 0.010370] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.010723] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.050412] CPU0: Intel(R) Core(TM)2 Duo CPU E6850 @ 3.00GHz stepping 0b [ 0.052002] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.052002] PEBS disabled due to CPU errata. [ 0.052002] ... version: 2 [ 0.052002] ... bit width: 40 [ 0.052002] ... generic registers: 2 [ 0.052002] ... value mask: 000000ffffffffff [ 0.052002] ... max period: 000000007fffffff [ 0.052002] ... fixed-purpose events: 3 [ 0.052002] ... event mask: 0000000700000003 [ 0.060052] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.072019] CPU 1 irqstacks, hard=f3cd4000 soft=f3cd6000 [ 0.072021] Booting Node 0, Processors #1 [ 0.008000] Initializing CPU#1 [ 0.084033] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.084074] Brought up 2 CPUs [ 0.084077] Total of 2 processors activated (11999.85 BogoMIPS). [ 0.085696] devtmpfs: initialized [ 0.085966] PM: Registering ACPI NVS region [mem 0xdfee0000-0xdfee2fff] (12288 bytes) [ 0.086070] dummy: [ 0.086127] NET: Registered protocol family 16 [ 0.086284] ACPI: bus type pci registered [ 0.086340] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.086344] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.086345] PCI: Using MMCONFIG for extended config space [ 0.086347] PCI: Using configuration type 1 for base access [ 0.088041] bio: create slab <bio-0> at 0 [ 0.088126] ACPI: Added _OSI(Module Device) [ 0.088129] ACPI: Added _OSI(Processor Device) [ 0.088132] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.088134] ACPI: Added _OSI(Processor Aggregator Device) [ 0.089170] ACPI: EC: Look up EC in DSDT [ 0.093889] ACPI: Interpreter enabled [ 0.093907] ACPI: (supports S0 S1 S4 S5) [ 0.093935] ACPI: Using IOAPIC for interrupt routing [ 0.099060] ACPI: No dock devices found. [ 0.099068] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.099130] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.099219] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.099222] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.099225] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.099227] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.099230] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff] (ignored) [ 0.099232] PCI: root bus 00: using default resources [ 0.099268] PCI host bridge to bus 0000:00 [ 0.099271] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.099273] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.099284] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.099324] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.099355] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.099394] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.099435] pci 0000:00:1a.0: reg 20: [io 0xe200-0xe21f] [ 0.099477] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.099518] pci 0000:00:1a.1: reg 20: [io 0xe000-0xe01f] [ 0.099559] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.099600] pci 0000:00:1a.2: reg 20: [io 0xe100-0xe11f] [ 0.099645] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.099661] pci 0000:00:1a.7: reg 10: [mem 0xf9100000-0xf91003ff] [ 0.099738] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.099790] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.099813] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400 [ 0.099865] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.099888] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 [ 0.099940] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.099963] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400 [ 0.100029] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.100054] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.100095] pci 0000:00:1d.0: reg 20: [io 0xe300-0xe31f] [ 0.100136] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.100177] pci 0000:00:1d.1: reg 20: [io 0xe400-0xe41f] [ 0.100219] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.100259] pci 0000:00:1d.2: reg 20: [io 0xe500-0xe51f] [ 0.100305] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.100321] pci 0000:00:1d.7: reg 10: [mem 0xf9101000-0xf91013ff] [ 0.100394] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.100447] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.100525] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.100528] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.100563] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018a [ 0.100578] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] [ 0.100586] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] [ 0.100594] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] [ 0.100601] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] [ 0.100609] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f] [ 0.100617] pci 0000:00:1f.2: reg 24: [io 0xfc00-0xfc0f] [ 0.100651] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.100666] pci 0000:00:1f.3: reg 10: [mem 0xf9102000-0xf91020ff 64bit] [ 0.100686] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.100717] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185 [ 0.100731] pci 0000:00:1f.5: reg 10: [io 0xe700-0xe707] [ 0.100739] pci 0000:00:1f.5: reg 14: [io 0xe800-0xe803] [ 0.100747] pci 0000:00:1f.5: reg 18: [io 0xe900-0xe907] [ 0.100754] pci 0000:00:1f.5: reg 1c: [io 0xea00-0xea03] [ 0.100762] pci 0000:00:1f.5: reg 20: [io 0xeb00-0xeb0f] [ 0.100770] pci 0000:00:1f.5: reg 24: [io 0xec00-0xec0f] [ 0.100836] pci 0000:01:00.0: [10de:0402] type 00 class 0x030000 [ 0.100846] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff] [ 0.100857] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.100868] pci 0000:01:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit] [ 0.100875] pci 0000:01:00.0: reg 24: [io 0xc000-0xc07f] [ 0.100883] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.100925] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.100928] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.100931] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.100936] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.100973] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.100976] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.101043] pci 0000:03:00.0: [104c:8240] type 01 class 0x060400 [ 0.101137] pci 0000:03:00.0: supports D1 D2 [ 0.108020] pci 0000:00:1c.2: PCI bridge to [bus 03-04] [ 0.108026] pci 0000:00:1c.2: bridge window [mem 0xf9000000-0xf90fffff] [ 0.108116] pci 0000:04:00.0: [2718:5125] type 00 class 0x110000 [ 0.108138] pci 0000:04:00.0: reg 10: [mem 0xf9000000-0xf900ffff] [ 0.108295] pci 0000:03:00.0: PCI bridge to [bus 04-04] [ 0.108308] pci 0000:03:00.0: bridge window [mem 0xf9000000-0xf90fffff] [ 0.108379] pci 0000:05:00.0: [197b:2368] type 00 class 0x010185 [ 0.108408] pci 0000:05:00.0: reg 10: [io 0xd000-0xd007] [ 0.108422] pci 0000:05:00.0: reg 14: [io 0xd100-0xd103] [ 0.108436] pci 0000:05:00.0: reg 18: [io 0xd200-0xd207] [ 0.108450] pci 0000:05:00.0: reg 1c: [io 0xd300-0xd303] [ 0.108463] pci 0000:05:00.0: reg 20: [io 0xd400-0xd40f] [ 0.108535] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.108544] pci 0000:00:1c.3: PCI bridge to [bus 05-05] [ 0.108548] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.108552] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf8ffffff] [ 0.108593] pci 0000:00:1c.4: PCI bridge to [bus 06-06] [ 0.108596] pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff] [ 0.108658] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode) [ 0.108662] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] [ 0.108670] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.108672] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.108695] pci_bus 0000:00: on NUMA node 0 [ 0.108698] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.108921] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.108980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.109035] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.109104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.109162] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.109342] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f) [ 0.121949] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.122008] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.122065] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.122123] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.122179] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.122236] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.122292] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.122349] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) [ 0.122440] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.122445] vgaarb: loaded [ 0.122446] vgaarb: bridge control possible 0000:01:00.0 [ 0.122477] PCI: Using ACPI for IRQ routing [ 0.123705] PCI: pci_cache_line_size set to 64 bytes [ 0.123789] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.123792] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff [ 0.123999] pnp: PnP ACPI init [ 0.124018] ACPI: bus type pnp registered [ 0.124093] pnp 00:00: [bus 00-3f] [ 0.124096] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.124098] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.124100] pnp 00:00: [io 0x0d00-0xffff window] [ 0.124103] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.124105] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.124107] pnp 00:00: [mem 0xdff00000-0xfebfffff window] [ 0.124152] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.124256] pnp 00:01: [io 0x0010-0x001f] [ 0.124258] pnp 00:01: [io 0x0022-0x003f] [ 0.124261] pnp 00:01: [io 0x0044-0x005f] [ 0.124263] pnp 00:01: [io 0x0062-0x0063] [ 0.124265] pnp 00:01: [io 0x0065-0x006f] [ 0.124267] pnp 00:01: [io 0x0074-0x007f] [ 0.124269] pnp 00:01: [io 0x0091-0x0093] [ 0.124271] pnp 00:01: [io 0x00a2-0x00bf] [ 0.124273] pnp 00:01: [io 0x00e0-0x00ef] [ 0.124275] pnp 00:01: [io 0x04d0-0x04d1] [ 0.124277] pnp 00:01: [io 0x0290-0x029f] [ 0.124279] pnp 00:01: [io 0x0800-0x087f] [ 0.124281] pnp 00:01: [io 0x0290-0x0294] [ 0.124283] pnp 00:01: [io 0x0880-0x088f] [ 0.124342] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.124345] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.124348] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.124350] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.124353] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.124356] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.124370] pnp 00:02: [dma 4] [ 0.124372] pnp 00:02: [io 0x0000-0x000f] [ 0.124374] pnp 00:02: [io 0x0080-0x0090] [ 0.124376] pnp 00:02: [io 0x0094-0x009f] [ 0.124378] pnp 00:02: [io 0x00c0-0x00df] [ 0.124410] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.124423] pnp 00:03: [io 0x0070-0x0073] [ 0.124431] pnp 00:03: [irq 8] [ 0.124467] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.124479] pnp 00:04: [io 0x0061] [ 0.124510] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.124520] pnp 00:05: [io 0x00f0-0x00ff] [ 0.124525] pnp 00:05: [irq 13] [ 0.124558] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.124686] pnp 00:06: [io 0x03f0-0x03f5] [ 0.124688] pnp 00:06: [io 0x03f7] [ 0.124693] pnp 00:06: [irq 6] [ 0.124695] pnp 00:06: [dma 2] [ 0.124737] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.125008] pnp 00:07: [io 0x0378-0x037f] [ 0.125013] pnp 00:07: [irq 7] [ 0.125063] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.125193] pnp 00:08: [io 0x0400-0x04bf] [ 0.125246] system 00:08: [io 0x0400-0x04bf] has been reserved [ 0.125249] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.125493] pnp 00:09: [mem 0xf0000000-0xf3ffffff] [ 0.125554] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.125558] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.125752] pnp 00:0a: [mem 0x000ccc00-0x000cffff] [ 0.125755] pnp 00:0a: [mem 0x000f0000-0x000f7fff] [ 0.125757] pnp 00:0a: [mem 0x000f8000-0x000fbfff] [ 0.125759] pnp 00:0a: [mem 0x000fc000-0x000fffff] [ 0.125761] pnp 00:0a: [mem 0xdfee0000-0xdfefffff] [ 0.125764] pnp 00:0a: [mem 0x00000000-0x0009ffff] [ 0.125766] pnp 00:0a: [mem 0x00100000-0xdfedffff] [ 0.125768] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 0.125770] pnp 00:0a: [mem 0xfed10000-0xfed1dfff] [ 0.125772] pnp 00:0a: [mem 0xfed20000-0xfed8ffff] [ 0.125774] pnp 00:0a: [mem 0xfee00000-0xfee00fff] [ 0.125776] pnp 00:0a: [mem 0xffb00000-0xffb7ffff] [ 0.125779] pnp 00:0a: [mem 0xfff00000-0xffffffff] [ 0.125781] pnp 00:0a: [mem 0x000e0000-0x000effff] [ 0.125849] system 00:0a: [mem 0x000ccc00-0x000cffff] has been reserved [ 0.125852] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.125855] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.125858] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.125861] system 00:0a: [mem 0xdfee0000-0xdfefffff] could not be reserved [ 0.125864] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.125867] system 00:0a: [mem 0x00100000-0xdfedffff] could not be reserved [ 0.125870] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.125872] system 00:0a: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.125875] system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.125878] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.125881] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.125884] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved [ 0.125887] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved [ 0.125890] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.125914] pnp 00:0b: [mem 0xffb80000-0xffbfffff] [ 0.125961] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active) [ 0.125967] pnp: PnP ACPI: found 12 devices [ 0.125969] ACPI: ACPI bus type pnp unregistered [ 0.125973] PnPBIOS: Disabled by ACPI PNP [ 0.161968] Switching to clocksource acpi_pm [ 0.162005] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000 [ 0.162008] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000 [ 0.162027] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03-04] add_size 1000 [ 0.162030] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-04] add_size 200000 [ 0.162039] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000 [ 0.162047] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-06] add_size 200000 [ 0.162050] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 06-06] add_size 200000 [ 0.162063] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.162066] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.162069] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.162072] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.162074] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.162077] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.162080] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.162084] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf9200000-0xf93fffff] [ 0.162087] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf9400000-0xf95fffff 64bit pref] [ 0.162090] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf9600000-0xf97fffff 64bit pref] [ 0.162093] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf9800000-0xf99fffff 64bit pref] [ 0.162096] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf9a00000-0xf9bfffff] [ 0.162099] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf9c00000-0xf9dfffff 64bit pref] [ 0.162102] pci 0000:00:1c.2: BAR 13: assigned [io 0x1000-0x1fff] [ 0.162107] pci 0000:01:00.0: BAR 6: assigned [mem 0xf7000000-0xf701ffff pref] [ 0.162110] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.162112] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.162116] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf7ffffff] [ 0.162120] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.162124] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.162127] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.162131] pci 0000:00:1c.0: bridge window [mem 0xf9200000-0xf93fffff] [ 0.162135] pci 0000:00:1c.0: bridge window [mem 0xf9400000-0xf95fffff 64bit pref] [ 0.162141] pci 0000:03:00.0: PCI bridge to [bus 04-04] [ 0.162148] pci 0000:03:00.0: bridge window [mem 0xf9000000-0xf90fffff] [ 0.162160] pci 0000:00:1c.2: PCI bridge to [bus 03-04] [ 0.162163] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 0.162168] pci 0000:00:1c.2: bridge window [mem 0xf9000000-0xf90fffff] [ 0.162172] pci 0000:00:1c.2: bridge window [mem 0xf9600000-0xf97fffff 64bit pref] [ 0.162178] pci 0000:00:1c.3: PCI bridge to [bus 05-05] [ 0.162181] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.162185] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf8ffffff] [ 0.162189] pci 0000:00:1c.3: bridge window [mem 0xf9800000-0xf99fffff 64bit pref] [ 0.162195] pci 0000:00:1c.4: PCI bridge to [bus 06-06] [ 0.162198] pci 0000:00:1c.4: bridge window [io 0x9000-0x9fff] [ 0.162202] pci 0000:00:1c.4: bridge window [mem 0xf9a00000-0xf9bfffff] [ 0.162206] pci 0000:00:1c.4: bridge window [mem 0xf9c00000-0xf9dfffff 64bit pref] [ 0.162212] pci 0000:00:1e.0: PCI bridge to [bus 07-07] [ 0.162215] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] [ 0.162270] pci 0000:00:1e.0: setting latency timer to 64 [ 0.162273] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.162276] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.162278] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.162281] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7ffffff] [ 0.162283] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.162285] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 0.162288] pci_bus 0000:02: resource 1 [mem 0xf9200000-0xf93fffff] [ 0.162290] pci_bus 0000:02: resource 2 [mem 0xf9400000-0xf95fffff 64bit pref] [ 0.162292] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.162295] pci_bus 0000:03: resource 1 [mem 0xf9000000-0xf90fffff] [ 0.162297] pci_bus 0000:03: resource 2 [mem 0xf9600000-0xf97fffff 64bit pref] [ 0.162299] pci_bus 0000:04: resource 1 [mem 0xf9000000-0xf90fffff] [ 0.162302] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.162304] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf8ffffff] [ 0.162306] pci_bus 0000:05: resource 2 [mem 0xf9800000-0xf99fffff 64bit pref] [ 0.162309] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff] [ 0.162311] pci_bus 0000:06: resource 1 [mem 0xf9a00000-0xf9bfffff] [ 0.162313] pci_bus 0000:06: resource 2 [mem 0xf9c00000-0xf9dfffff 64bit pref] [ 0.162316] pci_bus 0000:07: resource 0 [io 0xb000-0xbfff] [ 0.162318] pci_bus 0000:07: resource 4 [io 0x0000-0xffff] [ 0.162320] pci_bus 0000:07: resource 5 [mem 0x00000000-0xffffffff] [ 0.162392] NET: Registered protocol family 2 [ 0.162450] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.162610] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.162908] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.163061] TCP: Hash tables configured (established 131072 bind 65536) [ 0.163063] TCP: reno registered [ 0.163065] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.163073] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.163146] NET: Registered protocol family 1 [ 0.163346] pci 0000:01:00.0: Boot video device [ 0.163358] PCI: CLS 32 bytes, default 64 [ 0.163399] Unpacking initramfs... [ 0.413196] Freeing initrd memory: 14264k freed [ 0.418805] audit: initializing netlink socket (disabled) [ 0.418827] type=2000 audit(1453007985.416:1): initialized [ 0.429040] highmem bounce pool size: 64 pages [ 0.429045] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.429211] VFS: Disk quotas dquot_6.5.2 [ 0.429238] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.429313] msgmni has been set to 1691 [ 0.429460] alg: No test for stdrng (krng) [ 0.429485] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.429489] io scheduler noop registered [ 0.429491] io scheduler deadline registered [ 0.429510] io scheduler cfq registered (default) [ 0.429833] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.429850] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.429852] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.430337] GHES: HEST is not enabled! [ 0.430349] isapnp: Scanning for PnP cards... [ 0.783242] isapnp: No Plug & Play device found [ 0.783276] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.783615] Linux agpgart interface v0.103 [ 0.783891] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.784291] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.784317] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.784394] mousedev: PS/2 mouse device common for all mice [ 0.784444] rtc_cmos 00:03: RTC can wake from S4 [ 0.784545] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.784566] rtc0: alarms up to one month, 242 bytes nvram [ 0.784677] TCP: cubic registered [ 0.784731] NET: Registered protocol family 10 [ 0.784941] Mobile IPv6 [ 0.784943] NET: Registered protocol family 17 [ 0.784947] Registering the dns_resolver key type [ 0.785012] Using IPI No-Shortcut mode [ 0.785084] PM: Hibernation image not present or could not be loaded. [ 0.785093] registered taskstats version 1 [ 0.785466] rtc_cmos 00:03: setting system clock to 2016-01-17 05:19:46 UTC (1453007986) [ 0.785551] Freeing unused kernel memory: 416k freed [ 0.785752] Write protecting the kernel text: 3496k [ 0.785774] Write protecting the kernel read-only data: 984k [ 0.803784] udevd[49]: starting version 175 [ 0.818992] usbcore: registered new interface driver usbfs [ 0.819012] usbcore: registered new interface driver hub [ 0.834948] usbcore: registered new device driver usb [ 0.835382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.835441] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.835445] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.835465] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.852084] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.852110] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9100000 [ 0.854035] SCSI subsystem initialized [ 0.864118] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.864167] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.864170] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.864173] usb usb1: Product: EHCI Host Controller [ 0.864175] usb usb1: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 0.864177] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.864288] hub 1-0:1.0: USB hub found [ 0.864295] hub 1-0:1.0: 6 ports detected [ 0.864416] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.864420] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.864428] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.872286] uhci_hcd: USB Universal Host Controller Interface driver [ 0.885607] libata version 3.00 loaded. [ 0.897357] scsi0 : pata_jmicron [ 0.899172] microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb3 [ 0.899209] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.899229] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9101000 [ 0.902013] scsi1 : pata_jmicron [ 0.902800] ata1: PATA max UDMA/100 cmd 0xd000 ctl 0xd100 bmdma 0xd400 irq 19 [ 0.902804] ata2: PATA max UDMA/100 cmd 0xd200 ctl 0xd300 bmdma 0xd408 irq 19 [ 0.908583] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.908610] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.908613] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.908616] usb usb2: Product: EHCI Host Controller [ 0.908618] usb usb2: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 0.908620] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.908723] hub 2-0:1.0: USB hub found [ 0.908728] hub 2-0:1.0: 6 ports detected [ 0.908849] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.908852] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.908860] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.908895] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e200 [ 0.908926] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.908929] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.908931] usb usb3: Product: UHCI Host Controller [ 0.908933] usb usb3: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 0.908936] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.909022] hub 3-0:1.0: USB hub found [ 0.909027] hub 3-0:1.0: 2 ports detected [ 0.909101] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.909104] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.909111] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.909142] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000 [ 0.909173] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.909175] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.909178] usb usb4: Product: UHCI Host Controller [ 0.909180] usb usb4: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 0.909182] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.909273] hub 4-0:1.0: USB hub found [ 0.909277] hub 4-0:1.0: 2 ports detected [ 0.909348] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.909351] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.909358] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.909380] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e100 [ 0.909410] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.909412] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.909415] usb usb5: Product: UHCI Host Controller [ 0.909417] usb usb5: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 0.909419] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.909508] hub 5-0:1.0: USB hub found [ 0.909512] hub 5-0:1.0: 2 ports detected [ 0.909585] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.909589] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.909596] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.909616] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300 [ 0.909646] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.909649] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.909651] usb usb6: Product: UHCI Host Controller [ 0.909653] usb usb6: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 0.909655] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.909743] hub 6-0:1.0: USB hub found [ 0.909748] hub 6-0:1.0: 2 ports detected [ 0.909820] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.909823] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.909830] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.909851] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400 [ 0.909882] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.909884] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.909887] usb usb7: Product: UHCI Host Controller [ 0.909889] usb usb7: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 0.909891] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.909982] hub 7-0:1.0: USB hub found [ 0.909987] hub 7-0:1.0: 2 ports detected [ 0.910057] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.910061] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.910068] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.910088] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500 [ 0.910118] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.910121] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.910123] usb usb8: Product: UHCI Host Controller [ 0.910125] usb usb8: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 0.910128] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.910214] hub 8-0:1.0: USB hub found [ 0.910219] hub 8-0:1.0: 2 ports detected [ 0.910311] ata_piix 0000:00:1f.2: version 2.13 [ 0.910323] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 0.910362] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.914940] scsi2 : ata_piix [ 0.920881] scsi3 : ata_piix [ 0.921466] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.921470] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.921516] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.921559] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.926517] scsi4 : ata_piix [ 0.930187] scsi5 : ata_piix [ 0.930760] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19 [ 0.930765] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19 [ 0.937276] Floppy drive(s): fd0 is 1.44M [ 0.955647] FDC 0 is a post-1991 82077 [ 0.972007] microcode: CPU0 updated to revision 0xba, date = 2010-10-03 [ 0.973440] microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb3 [ 0.979589] microcode: CPU1 updated to revision 0xba, date = 2010-10-03 [ 0.981331] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 1.232020] usb 1-4: new high-speed USB device number 3 using ehci_hcd [ 1.269216] ata4: SATA link down (SStatus 0 SControl 300) [ 1.269237] ata6: SATA link down (SStatus 0 SControl 300) [ 1.364908] usb 1-4: New USB device found, idVendor=0781, idProduct=5566 [ 1.364911] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.364914] usb 1-4: Product: Cruzer Slice [ 1.364915] usb 1-4: Manufacturer: SanDisk [ 1.364917] usb 1-4: SerialNumber: 4C532006300706114400 [ 1.367333] Initializing USB Mass Storage driver... [ 1.367411] scsi6 : usb-storage 1-4:1.0 [ 1.367655] usbcore: registered new interface driver usb-storage [ 1.367657] USB Mass Storage support registered. [ 1.400052] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.404045] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.408116] ata3.00: ATAPI: HL-DT-ST BD-RE BH08LS20, 2.00, max UDMA/133 [ 1.412309] ata5.00: HPA detected: current 3907027055, native 3907029168 [ 1.412313] ata5.00: ATA-8: ST32000542AS, CC34, max UDMA/133 [ 1.412315] ata5.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.416046] Refined TSC clocksource calibration: 2999.999 MHz. [ 1.416051] Switching to clocksource tsc [ 1.424107] ata3.00: configured for UDMA/133 [ 1.428295] ata5.00: configured for UDMA/133 [ 1.436441] scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BH08LS20 2.00 PQ: 0 ANSI: 5 [ 1.436620] scsi 4:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5 [ 1.448990] sd 4:0:0:0: [sda] 3907027055 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1.449042] sd 4:0:0:0: [sda] Write Protect is off [ 1.449045] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.449067] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.495139] sda: sda1 sda2 < sda5 > [ 1.495389] sd 4:0:0:0: [sda] Attached SCSI disk [ 1.497466] sr 2:0:0:0: Attached scsi generic sg0 type 5 [ 1.497525] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 1.508395] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.508399] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.508742] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.716015] usb 4-1: new low-speed USB device number 2 using uhci_hcd [ 1.889175] usb 4-1: New USB device found, idVendor=046d, idProduct=c00c [ 1.889178] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.889180] usb 4-1: Product: USB Mouse [ 1.889182] usb 4-1: Manufacturer: Logitech [ 1.909642] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input0 [ 1.909755] generic-usb 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1a.1-1/input0 [ 1.909888] usbcore: registered new interface driver usbhid [ 1.909890] usbhid: USB HID core driver [ 2.132010] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 2.295413] usb 5-1: New USB device found, idVendor=03eb, idProduct=3301 [ 2.295416] usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.295419] usb 5-1: Product: Standard USB Hub [ 2.303430] hub 5-1:1.0: USB hub found [ 2.304413] hub 5-1:1.0: 4 ports detected [ 2.364794] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Slice 1.03 PQ: 0 ANSI: 2 [ 2.367347] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.367789] sd 6:0:0:0: [sdb] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 2.368535] sd 6:0:0:0: [sdb] Write Protect is off [ 2.368538] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 2.369284] sd 6:0:0:0: [sdb] No Caching mode page present [ 2.369320] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 2.372409] sd 6:0:0:0: [sdb] No Caching mode page present [ 2.372443] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 2.374287] sdb: sdb1 < sdb5 > [ 2.376786] sd 6:0:0:0: [sdb] No Caching mode page present [ 2.376821] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 2.376854] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 2.585416] usb 5-1.4: new low-speed USB device number 3 using uhci_hcd [ 2.723411] usb 5-1.4: New USB device found, idVendor=1038, idProduct=0100 [ 2.723414] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.723416] usb 5-1.4: Product: Zboard [ 2.723418] usb 5-1.4: Manufacturer: Ideazon [ 2.755798] input: Ideazon Zboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.4/5-1.4:1.0/input/input1 [ 2.755841] generic-usb 0003:1038:0100.0002: input,hidraw1: USB HID v1.10 Keyboard [Ideazon Zboard] on usb-0000:00:1a.2-1.4/input0 [ 2.789465] input: Ideazon Zboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1.4/5-1.4:1.1/input/input2 [ 2.789504] generic-usb 0003:1038:0100.0003: input,hidraw2: USB HID v1.10 Device [Ideazon Zboard] on usb-0000:00:1a.2-1.4/input1 [ 6.739913] PM: Starting manual resume from disk [ 6.739916] PM: Hibernation image partition 8:5 present [ 6.739918] PM: Looking for hibernation image. [ 6.740170] PM: Image not found (code -22) [ 6.740172] PM: Hibernation image not present or could not be loaded. [ 6.927107] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 8.133498] udevd[378]: starting version 175 [ 8.396109] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.397060] parport_pc 00:07: reported by Plug and Play ACPI [ 8.397083] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 8.452619] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 8.452625] ACPI: Power Button [PWRB] [ 8.452777] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 8.452781] ACPI: Power Button [PWRF] [ 8.463975] [drm] Initialized drm 1.1.0 20060810 [ 8.532660] wmi: Mapper loaded [ 8.563333] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x084200a2) [ 8.566850] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS [ 8.607275] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 8.607278] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN [ 8.607281] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 8.607283] [drm] nouveau 0000:01:00.0: Bios version 60.84.35.00 [ 8.607286] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 8.607480] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do [ 8.607483] [drm] nouveau 0000:01:00.0: DCB version 4.0 [ 8.607486] [drm] nouveau 0000:01:00.0: DCB outp 00: 02000300 00000028 [ 8.607488] [drm] nouveau 0000:01:00.0: DCB outp 01: 01000302 00010030 [ 8.607491] [drm] nouveau 0000:01:00.0: DCB outp 02: 04011310 00000028 [ 8.607493] [drm] nouveau 0000:01:00.0: DCB outp 03: 02011312 00010030 [ 8.607495] [drm] nouveau 0000:01:00.0: DCB outp 04: 010223f1 00c0c080 [ 8.607497] [drm] nouveau 0000:01:00.0: DCB conn 00: 2030 [ 8.607500] [drm] nouveau 0000:01:00.0: DCB conn 01: 1130 [ 8.607502] [drm] nouveau 0000:01:00.0: DCB conn 02: 0210 [ 8.607505] [drm] nouveau 0000:01:00.0: DCB conn 03: 0211 [ 8.607507] [drm] nouveau 0000:01:00.0: DCB conn 04: 0213 [ 8.607511] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xBDC4 [ 8.630501] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC0E7 [ 8.651544] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCB33 [ 8.651551] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xCC25 [ 8.652613] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xCE3E [ 8.652615] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xCEA3 [ 8.678964] [drm] nouveau 0000:01:00.0: 0xCEA3: Condition still not met after 20ms, skipping following opcodes [ 8.681637] [TTM] Zone kernel: Available graphics memory: 433210 kiB [ 8.681639] [TTM] Zone highmem: Available graphics memory: 1812990 kiB [ 8.681641] [TTM] Initializing pool allocator [ 8.681651] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (GDDR3) [ 8.681657] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 8.681667] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 8.690283] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown [ 8.690286] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing [ 8.690828] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 8.690830] [drm] No driver support for vblank timestamp query. [ 8.697040] [drm] nouveau 0000:01:00.0: 1 available performance level(s) [ 8.697045] [drm] nouveau 0000:01:00.0: 0: core 600MHz shader 1188MHz memory 720MHz fanspeed 100% [ 8.697048] [drm] nouveau 0000:01:00.0: c: core 540MHz shader 1188MHz memory 702MHz voltage 1320mV fanspeed 100% [ 8.702559] coretemp coretemp.0: Using relative temperature scale! [ 8.702572] coretemp coretemp.0: Using relative temperature scale! [ 8.823437] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x320000, bo f6cd3600 [ 8.823522] fbcon: nouveaufb (fb0) is primary device [ 8.844056] Console: switching to colour frame buffer device 210x65 [ 8.845675] fb0: nouveaufb frame buffer device [ 8.845677] drm: registered panic notifier [ 8.845681] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 [ 8.871072] iTCO_vendor_support: vendor-support=0 [ 8.871715] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 8.871790] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0460) [ 8.872303] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.978712] Adding 8383484k swap on /dev/sda5. Priority:-1 extents:1 across:8383484k [ 9.990370] EXT4-fs (sda1): re-mounted. Opts: (null) [ 10.180560] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 10.278832] loop: module loaded [ 11.264287] RPC: Registered named UNIX socket transport module. [ 11.264290] RPC: Registered udp transport module. [ 11.264292] RPC: Registered tcp transport module. [ 11.264293] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 11.288385] FS-Cache: Loaded [ 11.303845] NFS: Registering the id_resolver key type [ 11.303859] FS-Cache: Netfs 'nfs' registered for caching [ 11.308187] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 13.126469] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5 [ 13.476516] lp0: using parport0 (interrupt-driven). [ 13.533575] Bluetooth: Core ver 2.16 [ 13.533590] NET: Registered protocol family 31 [ 13.533592] Bluetooth: HCI device and connection manager initialized [ 13.533594] Bluetooth: HCI socket layer initialized [ 13.533596] Bluetooth: L2CAP socket layer initialized [ 13.533601] Bluetooth: SCO socket layer initialized [ 13.572672] Bluetooth: RFCOMM TTY layer initialized [ 13.572676] Bluetooth: RFCOMM socket layer initialized [ 13.572678] Bluetooth: RFCOMM ver 1.11 [ 13.647971] ppdev: user-space parallel port driver [ 13.726652] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.726655] Bluetooth: BNEP filters: protocol multicast [ 45.994894] I-pipe: head domain RTAI registered. [ 45.994898] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 45.994928] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 45.994931] SYSINFO: CPUs 2, LINUX APIC IRQ 2312, TIM_FREQ 20833247, CLK_FREQ 2999963000, CPU_FREQ 2999963000 [ 45.994933] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 45.994936] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 20833247, 20833247, 12041750 [ 46.017886] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>. [ 46.017909] , <uses LINUX SYSCALLs>, kstacks pool size = 524288 bytes. [ 46.017913] RTAI[sched]: hard timer type/freq = APIC/20833247(Hz); default timing: oneshot; linear timed lists. [ 46.017916] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2999963000 hz. [ 46.017918] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns. [ 46.037740] RTAI[math]: loaded. [ 46.208101] hm2: loading Mesa HostMot2 driver version 0.15 [ 46.222395] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 46.222436] hm2_pci: discovered 5i25 at 0000:04:00.0 [ 46.223757] hm2/hm2_5i25.0: 34 I/O Pins used: [ 46.223760] hm2/hm2_5i25.0: IO Pin 000 (P3-01): IOPort [ 46.223762] hm2/hm2_5i25.0: IO Pin 001 (P3-14): IOPort [ 46.223765] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #0, pin Direction (Output) [ 46.223767] hm2/hm2_5i25.0: IO Pin 003 (P3-15): IOPort [ 46.223769] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #0, pin Step (Output) [ 46.223771] hm2/hm2_5i25.0: IO Pin 005 (P3-16): IOPort [ 46.223773] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #1, pin Direction (Output) [ 46.223776] hm2/hm2_5i25.0: IO Pin 007 (P3-17): IOPort [ 46.223778] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #1, pin Step (Output) [ 46.223780] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #2, pin Direction (Output) [ 46.223783] hm2/hm2_5i25.0: IO Pin 010 (P3-07): StepGen #2, pin Step (Output) [ 46.223785] hm2/hm2_5i25.0: IO Pin 011 (P3-08): StepGen #3, pin Direction (Output) [ 46.223787] hm2/hm2_5i25.0: IO Pin 012 (P3-09): StepGen #3, pin Step (Output) [ 46.223789] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 46.223791] hm2/hm2_5i25.0: IO Pin 014 (P3-11): IOPort [ 46.223793] hm2/hm2_5i25.0: IO Pin 015 (P3-12): IOPort [ 46.223795] hm2/hm2_5i25.0: IO Pin 016 (P3-13): IOPort [ 46.223797] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 46.223799] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 46.223801] hm2/hm2_5i25.0: IO Pin 019 (P2-02): StepGen #4, pin Direction (Output) [ 46.223804] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 46.223806] hm2/hm2_5i25.0: IO Pin 021 (P2-03): StepGen #4, pin Step (Output) [ 46.223808] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 46.223810] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 46.223812] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 46.223814] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 46.223816] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 46.223818] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 46.223819] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 46.223821] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 46.223823] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 46.223825] hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort [ 46.223827] hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort [ 46.223829] hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort [ 46.223896] hm2/hm2_5i25.0: registered [ 46.223898] hm2_5i25.0: initialized AnyIO board at 0000:04:00.0