muzzer@LinuxCNC:~$ linuxcnc
LINUXCNC - 2.8.0
Machine configuration directory is '/home/muzzer/linuxcnc/configs/probe_basic/probe_basic_lathe'
Machine configuration file is 'probe_basic_lathe.ini'
Starting LinuxCNC...
Unrecognized line skipped: ;Tool  X Offset     Z Offset     Fnt Ang      Bak Ang      Diameter     Orient Remark
Found file(REL): ./hallib/Bantam_v1.hal
Note: Using POSIX realtime
hm2: loading Mesa HostMot2 driver version 0.15
hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7
hm2_pci: discovered 5i25 at 0000:02:00.0
hm2/hm2_5i25.0: Smart Serial Firmware Version 43
Board hm2_5i25.0.7i76.0.0 Hardware Mode 0 = standard
Board hm2_5i25.0.7i76.0.0 Software Mode 0 = io_spin
Board hm2_5i25.0.7i76.0.0 Software Mode 1 = io_ana_spin
Board hm2_5i25.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv
hm2/hm2_5i25.0: 34 I/O Pins used:
hm2/hm2_5i25.0:     IO Pin 000 (P3-01): StepGen #0, pin Direction (Output)
hm2/hm2_5i25.0:     IO Pin 001 (P3-14): StepGen #0, pin Step (Output)
hm2/hm2_5i25.0:     IO Pin 002 (P3-02): StepGen #1, pin Direction (Output)
hm2/hm2_5i25.0:     IO Pin 003 (P3-15): StepGen #1, pin Step (Output)
hm2/hm2_5i25.0:     IO Pin 004 (P3-03): IOPort
hm2/hm2_5i25.0:     IO Pin 005 (P3-16): IOPort
hm2/hm2_5i25.0:     IO Pin 006 (P3-04): IOPort
hm2/hm2_5i25.0:     IO Pin 007 (P3-17): IOPort
hm2/hm2_5i25.0:     IO Pin 008 (P3-05): IOPort
hm2/hm2_5i25.0:     IO Pin 009 (P3-06): IOPort
hm2/hm2_5i25.0:     IO Pin 010 (P3-07): Smart Serial Interface #0, pin TxData0 (Output)
hm2/hm2_5i25.0:     IO Pin 011 (P3-08): Smart Serial Interface #0, pin RxData0 (Input)
hm2/hm2_5i25.0:     IO Pin 012 (P3-09): IOPort
hm2/hm2_5i25.0:     IO Pin 013 (P3-10): IOPort
hm2/hm2_5i25.0:     IO Pin 014 (P3-11): Muxed Encoder #0, pin Muxed Index (Input)
hm2/hm2_5i25.0:     IO Pin 015 (P3-12): Muxed Encoder #0, pin Muxed B (Input)
hm2/hm2_5i25.0:     IO Pin 016 (P3-13): Muxed Encoder #0, pin Muxed A (Input)
hm2/hm2_5i25.0:     IO Pin 017 (P2-01): IOPort
hm2/hm2_5i25.0:     IO Pin 018 (P2-14): IOPort
hm2/hm2_5i25.0:     IO Pin 019 (P2-02): IOPort
hm2/hm2_5i25.0:     IO Pin 020 (P2-15): IOPort
hm2/hm2_5i25.0:     IO Pin 021 (P2-03): IOPort
hm2/hm2_5i25.0:     IO Pin 022 (P2-16): IOPort
hm2/hm2_5i25.0:     IO Pin 023 (P2-04): IOPort
hm2/hm2_5i25.0:     IO Pin 024 (P2-17): IOPort
hm2/hm2_5i25.0:     IO Pin 025 (P2-05): IOPort
hm2/hm2_5i25.0:     IO Pin 026 (P2-06): IOPort
hm2/hm2_5i25.0:     IO Pin 027 (P2-07): Muxed Encoder Select #2, pin Mux Select 0 (Output)
hm2/hm2_5i25.0:     IO Pin 028 (P2-08): Muxed Encoder #1, pin Muxed A (Input)
hm2/hm2_5i25.0:     IO Pin 029 (P2-09): Muxed Encoder #1, pin Muxed B (Input)
hm2/hm2_5i25.0:     IO Pin 030 (P2-10): Muxed Encoder #1, pin Muxed Index (Input)
hm2/hm2_5i25.0:     IO Pin 031 (P2-11): IOPort
hm2/hm2_5i25.0:     IO Pin 032 (P2-12): IOPort
hm2/hm2_5i25.0:     IO Pin 033 (P2-13): IOPort
hm2/hm2_5i25.0: registered
hm2_5i25.0: initialized AnyIO board at 0000:02:00.0
Found file(REL): ./hallib/xhc-whb04b-6.hal
[qtpyvcp][INFO]  Logging to /home/muzzer/linuxcnc/configs/probe_basic/probe_basic_lathe/sim.log (logger.py:97)
[qtpyvcp][INFO]  QtPyVCP Version: v0.3.11 (opt_parser.py:199)
[qtpyvcp][DEBUG]  Qt Version: 5.9.5 (opt_parser.py:203)
[qtpyvcp][DEBUG]  Qt API: QT_API (opt_parser.py:204)
[qtpyvcp][DEBUG]  QtPy Version: 1.9.0 (opt_parser.py:205)
[qtpyvcp][DEBUG]  Command line options:
{
    "command_line_args": null, 
    "config_file": "/home/muzzer/linuxcnc/configs/probe_basic/probe_basic_lathe/custom_config.yml", 
    "confirm_exit": false, 
    "develop": false, 
    "fullscreen": true, 
    "help": false, 
    "hide_cursor": false, 
    "hide_menu_bar": false, 
    "hide_status_bar": false, 
    "info": false, 
    "ini": "/home/muzzer/linuxcnc/configs/probe_basic/probe_basic_lathe/probe_basic_lathe.ini", 
    "log_file": "/home/muzzer/linuxcnc/configs/probe_basic/probe_basic_lathe/sim.log", 
    "log_level": "DEBUG", 
    "maximize": false, 
    "perfmon": false, 
    "position": "0x0", 
    "qt_api": null, 
    "size": null, 
    "stylesheet": null, 
    "theme": null, 
    "version": false
} (opt_parser.py:209)
[qtpyvcp.utilities.config_loader][DEBUG]  Loading config files: ['/home/muzzer/linuxcnc/configs/probe_basic/probe_basic_lathe/custom_config.yml', '/home/muzzer/.local/lib/python2.7/site-packages/probe_basic_lathe/probe_basic_lathe.yml', '/home/muzzer/.local/lib/python2.7/site-packages/qtpyvcp/yaml_lib/default_config.yml'] (config_loader.py:36)
[qtpyvcp.utilities.config_loader][DEBUG]  Merged YAML config:

default_menubar:
- title: File
  items:
  - title: '&Open ...'
    action: win.openFile
    shortcut: ctrl+o
  - title: '&Recent Files'
    provider: qtpyvcp.widgets.recent_files_menu:RecentFilesMenu
  - title: '&Reload'
    action: program.reload
  - title: '&Close'
    action: program.clear
  - title: Save &As
    action: null
  - separator
  - title: Edit ToolTable
    action: win.showDialog
    args:
    - tool_edit
  - separator
  - title: Exit
    action: app.exit
    shortcut: ctrl+q
- title: Machine
  items:
  - title: Toggle E-Stop
    action: machine.estop.toggle
    shortcut: F1
  - title: Toggle Power
    action: machine.power.toggle
    shortcut: F2
  - separator
  - title: Run Program
    action: program.run
    shortcut: R
  - title: Step
    action: program.step
    shortcut: T
  - title: Pause
    action: program.pause
    shortcut: P
  - title: Resume
    action: program.resume
    shortcut: R
  - title: Abort
    action: program.abort
    shortcut: esc
  - title: Optional Stop
    action: program.optional_stop.toggle
  - title: Optional Skip
    action: program.optional_skip.toggle
  - separator
  - title: Homing
    provider: qtpyvcp.widgets.menus.homing_menu:HomingMenu
  - title: Cooling
    items:
    - title: Flood
      action: coolant.flood.toggle
      shortcut: F7
    - title: Mist
      action: coolant.mist.toggle
      shortcut: F8
  - title: Set Work Offsets
    action: win.showDialog
    args:
    - set_work_offsets
  - separator
  - title: Override Limits
    action: machine.override_limits
- title: Settings
  items:
  - title: Show On-screen Keyboard
    action: settings.virtual-input.enable
- title: View
  items:
  - title: Show Gridlines
    action: settings.backplot.show-grid
  - separator
  - title: Show Machine Bounds
    action: settings.backplot.show-machine-bounds
  - title: Show Machine Labels
    action: settings.backplot.show-machine-labels
  - title: Show Machine Ticks
    action: settings.backplot.show-machine-ticks
  - separator
  - title: Show Program Bounds
    action: settings.backplot.show-program-bounds
  - title: Show Program Labels
    action: settings.backplot.show-program-labels
  - title: Show Program Ticks
    action: settings.backplot.show-program-ticks
  - title: Use Colors per Tool
    action: settings.backplot.multitool-colors
  - separator
  - title: Perspective View
    action: settings.backplot.perspective-view
  - title: View Angle
    action: settings.backplot.view
- title: Tools
  items:
  - title: HAL Meter
    action: tool.halmeter
  - title: HAL Scope
    action: tool.halscope
  - title: HAL Show
    action: tool.halshow
  - title: LCNC Status
    action: tool.status
  - title: Calibration
    action: tool.calibration
  - title: Classicladder PLC
    action: tool.classicladder
  - title: Simulated Probe
    action: tool.simulate_probe
- title: About
  items:
  - title: About QtPyVCP
    action: win.showDialog
    args:
    - about_qtpyvcp
  - title: About Qt
    action: app.aboutQt
vcp:
  name: Probe Basic Lathe
  version: v0.0.1
  author: Chris Polanski
  description: Probe Basic lathe VCP.
windows:
  mainwindow:
    provider: probe_basic_lathe.probe_basic_lathe:ProbeBasicLathe
    kwargs:
      menu: &id001
      - title: File
        items:
        - title: '&Open ...'
          action: win.openFile
          shortcut: ctrl+o
        - title: '&Recent Files'
          provider: qtpyvcp.widgets.recent_files_menu:RecentFilesMenu
        - title: '&Reload'
          action: program.reload
        - title: '&Close'
          action: program.clear
        - title: Save &As
          action: null
        - separator
        - title: Exit
          action: app.exit
          shortcut: ctrl+q
      - title: Machine
        items:
        - title: Toggle E-Stop
          action: machine.estop.toggle
          shortcut: F1
        - title: Toggle Power
          action: machine.power.toggle
          shortcut: F2
        - separator
        - title: Run Program
          action: program.run
          shortcut: R
        - title: Step
          action: program.step
          shortcut: T
        - title: Pause
          action: program.pause
          shortcut: P
        - title: Resume
          action: program.resume
          shortcut: R
        - title: Abort
          action: program.abort
          shortcut: esc
        - title: Optional Stop
          action: program.optional_stop.toggle
        - title: Optional Skip
          action: program.optional_skip.toggle
        - separator
        - title: Homing
          provider: qtpyvcp.widgets.menus.homing_menu:HomingMenu
        - title: Cooling
          items:
          - title: Flood
            action: coolant.flood.toggle
            shortcut: F7
          - title: Mist
            action: coolant.mist.toggle
            shortcut: F8
        - title: Set Work Offsets
          action: win.showDialog
          args: set_work_offsets
        - separator
        - title: Override Limits
          action: machine.override_limits
      - title: View
        items:
        - title: Show Gridlines
          action: settings.backplot.show-grid
        - separator
        - title: Show Machine Bounds
          action: settings.backplot.show-machine-bounds
        - title: Show Machine Labels
          action: settings.backplot.show-machine-labels
        - title: Show Machine Ticks
          action: settings.backplot.show-machine-ticks
        - separator
        - title: Show Program Bounds
          action: settings.backplot.show-program-bounds
        - title: Show Program Labels
          action: settings.backplot.show-program-labels
        - title: Show Program Ticks
          action: settings.backplot.show-program-ticks
        - separator
        - title: Perspective View
          action: settings.backplot.perspective-view
        - title: View Angle
          action: settings.backplot.view
      - title: Tools
        items:
        - title: HAL Meter
          action: tool.halmeter
        - title: HAL Scope
          action: tool.halscope
        - title: HAL Show
          action: tool.halshow
        - title: LCNC Status
          action: tool.status
        - title: Calibration
          action: tool.calibration
        - title: Classicladder PLC
          action: tool.classicladder
      - title: About
        items:
        - title: About Probe Basic
        - title: About QtPyVCP
        - title: About Qt
          action: app.aboutQt
      fullscreen: true
      ui_file: /home/muzzer/.local/lib/python2.7/site-packages/probe_basic_lathe/probe_basic_lathe.ui
      confirm_exit: false
data_plugins:
  status:
    provider: qtpyvcp.plugins.status:Status
    kwargs:
      cycle_time: 75
  persistent_data_manager:
    provider: qtpyvcp.plugins.persistent_data_manager:PersistentDataManager
    kwargs:
      serialization_method: pickle
  settings:
    provider: qtpyvcp.plugins.settings:Settings
  position:
    provider: qtpyvcp.plugins.positions:Position
    kwargs:
      report_actual_pos: true
      use_program_units: true
  tooltable:
    provider: qtpyvcp.plugins.tool_table:ToolTable
    kwargs:
      columns: TPXZIJDQR
  offsettable:
    provider: qtpyvcp.plugins.offset_table:OffsetTable
  notifications:
    provider: qtpyvcp.plugins.notifications:Notifications
    kwargs:
      enabled: true
      mode: native
      max_messages: 5
      persistent: true
  file_locations:
    provider: qtpyvcp.plugins.file_locations:FileLocations
    log_level: debug
    kwargs:
      default_location: NC Files
      local_locations:
        Home: ~/
        Desktop: ~/Desktop
        NC Files: ~/linuxcnc/nc_files
      network_locations: null
    exportedhal:
      provider: qtpyvcp.plugins.exported_hal:ExportedHal
  virtual_input:
    provider: qtpyvcp.plugins.virtual_input_manager:VirtualInputManager
dialogs:
  open_file:
    provider: qtpyvcp.widgets.dialogs.open_file_dialog:OpenFileDialog
  set_work_offsets:
    provider: qtpyvcp.widgets.dialogs.offsets_dialog:OffsetsDialog
  tool_edit:
    provider: qtpyvcp.widgets.dialogs.tool_edit_dialog:ToolEditDialog
  probe_sim:
    provider: qtpyvcp.widgets.dialogs.probesim_dialog:ProbeSim
  about_qtpyvcp:
    provider: qtpyvcp.widgets.dialogs.about_dialog:AboutDialog
  about_probebasic:
    provider: qtpyvcp.widgets.dialogs.about_dialog:AboutDialog
    kwargs:
      ui_file: /home/muzzer/.local/lib/python2.7/site-packages/probe_basic_lathe/about.ui
virtual_input_providers:
  number:
    provider: qtpyvcp.widgets.virtual_input.virtual_input:VirtualInput
    kwargs:
      ui_file: /home/muzzer/.local/lib/python2.7/site-packages/qtpyvcp/yaml_lib/../widgets/virtual_input/numpad.ui
  text:
    provider: qtpyvcp.widgets.virtual_input.virtual_input:VirtualInput
    kwargs:
      ui_file: /home/muzzer/.local/lib/python2.7/site-packages/qtpyvcp/yaml_lib/../widgets/virtual_input/keyboard.ui
application:
  provider: qtpyvcp.app.application:VCPApplication
  kwargs:
    stylesheet: /home/muzzer/.local/lib/python2.7/site-packages/probe_basic_lathe/probe_basic_lathe.qss
settings:
  touch-probe.diameter-offset:
    default_value: 0.123123
    persistent: true
    min_value: 0
    max_value: 1
  dro.display-units:
    default_value: 0
    options:
    - Auto
    - Inch
    - Metric
  dro.lathe-radius-mode:
    default_value: 0
    options:
    - Auto
    - Radius
    - Diameter
  dro.inch-format:
    default_value: '%9.4f'
    value_type: str
  dro.millimeter-format:
    default_value: '%9.3f'
    value_type: str
  dro.degree-format:
    default_value: '%9.2f'
  backplot.show-grid:
    default_value: false
  backplot.show-program-bounds:
    default_value: false
  backplot.show-program-labels:
    default_value: false
  backplot.show-program-ticks:
    default_value: false
  backplot.show-machine-bounds:
    default_value: false
  backplot.show-machine-labels:
    default_value: false
  backplot.show-machine-ticks:
    default_value: false
  backplot.perspective-view:
    default_value: true
  backplot.view:
    default_value: 1
    options:
    - 'X: Front View'
    - 'XZ: Lathe View'
    - 'XZ2: Lathe View'
    - 'Y: Front View'
    - 'Z: Top View'
    - 'Z2: Bottom View'
    - 'P: Isometric'
    - 'X: Side View'
    - 'XZ: Top View'
    - 'XZ2: RearTop View'
    - Isometric
  backplot.multitool-colors:
    default_value: true
  touch-probe.calibration-offset:
    description: Probe trigger point offset.
    default_value: 0.0
    persistent: true
    min_value: 0
    max_value: 1
  probe-parameters.probe-tool-number:
    description: probe tool number.
    default_value: 0.0
    persistent: true
    min_value: 0
    max_value: 9999
  probe-parameters.step-off-width:
    description: probe step off width.
    default_value: 0.0
    persistent: true
    min_value: 0
    max_value: 1000
  probe-parameters.probe-fast-fr:
    description: probe fast feedrate.
    default_value: 0.0
    persistent: true
    min_value: 0
    max_value: 1000
  probe-parameters.probe-slow-fr:
    description: probe slow feedrate.
    default_value: 0.0
    persistent: true
    min_value: 0
    max_value: 1000
  probe-parameters.max-xy-distance:
    description: max x and y probe travel distance.
    default_value: 0.0
    persistent: true
    min_value: 0
    max_value: 100
  probe-parameters.xy-clearance:
    description: x and y clearance distance.
    default_value: 0.0
    persistent: true
    min_value: 0
    max_value: 1000
  probe-parameters.max-z-distance:
    description: max z probe travel distance.
    default_value: 0.0
    persistent: true
    min_value: 0
    max_value: 100
  probe-parameters.z-clearance:
    description: z clearance distance.
    default_value: 0.0
    persistent: true
    min_value: 0
    max_value: 1000
  probe-parameters.extra-probe-depth:
    description: extra probe depth.
    default_value: 0.0
    persistent: true
    min_value: 0
    max_value: 100
  probe-parameters.edge-width:
    description: edge width probing distance.
    default_value: 0.0
    persistent: true
    min_value: 0
    max_value: 1000
  tool-change-position.x-tool-change-position:
    description: x axis tool change position.
    default_value: 0.0
    persistent: true
    min_value: -1000
    max_value: 1000
  tool-change-position.y-tool-change-position:
    description: y axis tool change position.
    default_value: 0.0
    persistent: true
    min_value: -1000
    max_value: 1000
  tool-change-position.z-tool-change-position:
    description: z axis tool change position.
    default_value: 0.0
    persistent: true
    min_value: -1000
    max_value: 1000
  tool-setter-probe.fast-probe-fr:
    description: tool probe fast feedrate.
    default_value: 0.0
    persistent: true
    min_value: -1000
    max_value: 1000
  tool-setter-probe.slow-probe-fr:
    description: tool probe slow feedrate.
    default_value: 0.0
    persistent: true
    min_value: -1000
    max_value: 1000
  tool-setter-probe.z-max-travel:
    description: maximumm z travel while probing before erroring out.
    default_value: 0.0
    persistent: true
    min_value: -1000
    max_value: 1000
  tool-setter-probe.xy-max-travel:
    description: maximumm xy travel while probing before erroring out.
    default_value: 0.0
    persistent: true
    min_value: -1000
    max_value: 1000
  tool-setter-probe.retract-distance:
    description: distance tool retracts after fast probe move.
    default_value: 0.0
    persistent: true
    min_value: -1000
    max_value: 1000
  tool-setter-probe.spindle-nose-height:
    description: distance from home to tool setter for the spindle nose.
    default_value: 0.0
    persistent: true
    min_value: -1000
    max_value: 1000
  programmable-coolant.active:
    description: activates programmable coolant with 1 as entry.
    default_value: 0.0
    persistent: true
    min_value: 0
    max_value: 1
  programmable-coolant.spindle-to-nozzle-dist:
    description: horizontal distance from spindle centerline to nozzle centerline.
    default_value: 0.0
    persistent: true
    min_value: -1000
    max_value: 1000
  programmable-coolant.gaugeline-to-nozzle-dist:
    description: vertical distance from spindle centerline to nozzle centerline.
    default_value: 0.0
    persistent: true
    min_value: -1000
    max_value: 1000
  programmable-coolant.pc-angle-offset:
    description: coolant nozzle offset amount to adjust for distance, pressure, gravity.
    default_value: 0.0
    persistent: true
    min_value: -45
    max_value: 45
  touch-parameters.master-tool-number:
    description: master tool number.
    default_value: 0.0
    persistent: true
    min_value: 1
    max_value: 9999
  touch-parameters.gage-thickness:
    description: gage thickness of touch off medium.
    default_value: 0.0
    persistent: true
    min_value: -1000
    max_value: 1000
  tool-change.use-tool-change-position:
    description: activates tool change position for m6 call.
    default_value: 0.0
    persistent: true
    min_value: 0
    max_value: 1
menubar: *id001
qtdesigner:
  ui_file: /home/muzzer/.local/lib/python2.7/site-packages/probe_basic_lathe/probe_basic_lathe.ui
  qss_file: /home/muzzer/.local/lib/python2.7/site-packages/probe_basic_lathe/probe_basic_lathe.qss

 (config_loader.py:55)
[qtpyvcp.utilities.info][INFO]  The machine has 2 axes and 2 joints (info.py:376)
[qtpyvcp.utilities.info][INFO]  The Axis/Joint mapping is: (info.py:377)
[qtpyvcp.utilities.info][INFO]  Axis X --> Joint 0 (info.py:385)
[qtpyvcp.utilities.info][INFO]  Axis Z --> Joint 1 (info.py:385)
[qtpyvcp.app.launcher][DEBUG]  Time: 0.000 (+0.000) - in script (launcher.py:53)
[qtpyvcp.app.launcher][DEBUG]  Loading data plugings (launcher.py:65)
[qtpyvcp.plugins][DEBUG]  Loading plugin 'status' from 'qtpyvcp.plugins.status:Status' (__init__.py:66)
[qtpyvcp.plugins][DEBUG]  Loading plugin 'persistent_data_manager' from 'qtpyvcp.plugins.persistent_data_manager:PersistentDataManager' (__init__.py:66)
[qtpyvcp.plugins][DEBUG]  Loading plugin 'settings' from 'qtpyvcp.plugins.settings:Settings' (__init__.py:66)
[qtpyvcp.plugins][DEBUG]  Loading plugin 'position' from 'qtpyvcp.plugins.positions:Position' (__init__.py:66)
[qtpyvcp.plugins][DEBUG]  Loading plugin 'tooltable' from 'qtpyvcp.plugins.tool_table:ToolTable' (__init__.py:66)
[qtpyvcp.utilities.info][WARNING]  No [TRAJ] SPINDLES entry in INI, using 1 (info.py:124)
[qtpyvcp.plugins][DEBUG]  Loading plugin 'offsettable' from 'qtpyvcp.plugins.offset_table:OffsetTable' (__init__.py:66)
[qtpyvcp.plugins][DEBUG]  Loading plugin 'notifications' from 'qtpyvcp.plugins.notifications:Notifications' (__init__.py:66)
[qtpyvcp.plugins][DEBUG]  Loading plugin 'file_locations' from 'qtpyvcp.plugins.file_locations:FileLocations' (__init__.py:66)
[qtpyvcp.plugins][DEBUG]  Loading plugin 'virtual_input' from 'qtpyvcp.plugins.virtual_input_manager:VirtualInputManager' (__init__.py:66)
[qtpyvcp.app.launcher][DEBUG]  Time: 0.214 (+0.214) - done loading data plugins (launcher.py:53)
[qtpyvcp.app.launcher][DEBUG]  Initializing app (launcher.py:69)
qt5ct: using qt5ct plugin
[qtpyvcp.plugins][DEBUG]  Initializing 'status' plugin (__init__.py:116)
[qtpyvcp.plugins.status][DEBUG]  Starting periodic updates with 75ms cycle time (status.py:675)
[qtpyvcp.plugins][DEBUG]  Initializing 'persistent_data_manager' plugin (__init__.py:116)
[qtpyvcp.plugins][DEBUG]  Initializing 'settings' plugin (__init__.py:116)
[qtpyvcp.actions.machine_actions][DEBUG]  Setting jog increment: 5.0 (5.0000) (machine_actions.py:952)
[qtpyvcp.actions.machine_actions][DEBUG]  Setting jog linear speed: 267.0 (machine_actions.py:863)
[qtpyvcp.plugins][DEBUG]  Initializing 'position' plugin (__init__.py:116)
[qtpyvcp.plugins][DEBUG]  Initializing 'tooltable' plugin (__init__.py:116)
[qtpyvcp.plugins][DEBUG]  Initializing 'offsettable' plugin (__init__.py:116)
[qtpyvcp.plugins][DEBUG]  Initializing 'notifications' plugin (__init__.py:116)
[qtpyvcp.plugins][DEBUG]  Initializing 'file_locations' plugin (__init__.py:116)
[qtpyvcp.plugins][DEBUG]  Initializing 'virtual_input' plugin (__init__.py:116)
[qtpyvcp][INFO]  Loading global stylesheet: /home/muzzer/.local/lib/python2.7/site-packages/probe_basic_lathe/probe_basic_lathe.qss (application.py:186)
[qtpyvcp.app.launcher][DEBUG]  Time: 0.648 (+0.434) - done initializing app (launcher.py:53)
[qtpyvcp.app.launcher][DEBUG]  Loading dialogs (launcher.py:73)
[qtpyvcp.app.launcher][DEBUG]  Time: 0.800 (+0.152) - done loading dialogs (launcher.py:53)
[qtpyvcp.app.launcher][DEBUG]  Loading windows (launcher.py:77)
[qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG]  Drawing Lathe tool id 15 (vtk_backplot.py:1871)
[qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG]  FrontAngle 45.0 Point P1 X = -0.247487373415 P1 Z = -0.247487373415 (vtk_backplot.py:1874)
[qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG]  BackAngle 10.0 Point P2 X = -0.0607768621834 P2 Z = -0.344682713554 (vtk_backplot.py:1876)
[qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG]  show grid (vtk_backplot.py:1137)
[qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG]  Setting view to: P (vtk_backplot.py:921)
[qtpyvcp.lib.decorators][WARNING]  Deprecation Warning: The widget "qtpyvcp.widgets.display_widgets.load_meter.LoadMeter" has been deprecated and will be removed in the future. Reason: new base class implementation. Replaced by: BarIndicator. (decorators.py:25)
qt5ct: D-Bus global menu: no
[qtpyvcp.plugins][DEBUG]  Post GUI Initializing 'status' plugin (__init__.py:128)
[qtpyvcp.plugins][DEBUG]  Post GUI Initializing 'persistent_data_manager' plugin (__init__.py:128)
[qtpyvcp.plugins][DEBUG]  Post GUI Initializing 'settings' plugin (__init__.py:128)
[qtpyvcp.plugins][DEBUG]  Post GUI Initializing 'position' plugin (__init__.py:128)
[qtpyvcp.plugins][DEBUG]  Post GUI Initializing 'tooltable' plugin (__init__.py:128)
[qtpyvcp.plugins][DEBUG]  Post GUI Initializing 'offsettable' plugin (__init__.py:128)
[qtpyvcp.plugins][DEBUG]  Post GUI Initializing 'notifications' plugin (__init__.py:128)
[qtpyvcp.plugins][DEBUG]  Post GUI Initializing 'file_locations' plugin (__init__.py:128)
[qtpyvcp.plugins][DEBUG]  Post GUI Initializing 'virtual_input' plugin (__init__.py:128)
[qtpyvcp.app.launcher][DEBUG]  Time: 5.209 (+4.408) - done loading windows (launcher.py:53)
[qtpyvcp.app.launcher][DEBUG]  Initializing widgets (launcher.py:81)
[qtpyvcp.hal][DEBUG]  Using existing HAL component: qtpyvcp (__init__.py:59)
[qtpyvcp.hal.hal_qlib][DEBUG]  Adding HAL pin: qtpyvcp.timerhours-2.enable (bit in) (hal_qlib.py:89)
[qtpyvcp.hal.hal_qlib][DEBUG]  Adding HAL pin: qtpyvcp.timerhours-2.in (u32 in) (hal_qlib.py:89)
[qtpyvcp.hal][DEBUG]  Using existing HAL component: qtpyvcp (__init__.py:59)
[qtpyvcp.hal.hal_qlib][DEBUG]  Adding HAL pin: qtpyvcp.timerseconds-2.enable (bit in) (hal_qlib.py:89)
[qtpyvcp.hal.hal_qlib][DEBUG]  Adding HAL pin: qtpyvcp.timerseconds-2.in (u32 in) (hal_qlib.py:89)
[qtpyvcp.hal][DEBUG]  Using existing HAL component: qtpyvcp (__init__.py:59)
[qtpyvcp.hal.hal_qlib][DEBUG]  Adding HAL pin: qtpyvcp.timerminutes-2.enable (bit in) (hal_qlib.py:89)
[qtpyvcp.hal.hal_qlib][DEBUG]  Adding HAL pin: qtpyvcp.timerminutes-2.in (u32 in) (hal_qlib.py:89)
[qtpyvcp.app.launcher][DEBUG]  Time: 5.241 (+0.032) - done initializing widgets (launcher.py:53)
[qtpyvcp.app.launcher][INFO]  Loading POSTGUI_HALFILE: /home/muzzer/linuxcnc/configs/probe_basic/probe_basic_lathe/hallib/time.hal (launcher.py:96)
qt5ct: custom style sheet is disabled
[qtpyvcp.actions.program_actions][DEBUG]  Loading NC program: /usr/share/linuxcnc/ncfiles/lathe_pawn.ngc (program_actions.py:32)
[qtpyvcp.plugins.offset_table][DEBUG]  Params file changed: /home/muzzer/linuxcnc/configs/probe_basic/probe_basic_lathe/linuxcnc.var (offset_table.py:194)
[qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG]  load_program (vtk_backplot.py:648)
[qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG]  G-code Comment: interpreter: Lathe diameter mode changed to diameter (vtk_backplot.py:163)
[qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG]  G-code Comment: interpreter: Lathe diameter mode changed to radius (vtk_backplot.py:163)
[qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG]  G-code Comment: interpreter: feed mode set to units per minute (vtk_backplot.py:163)
[qtpyvcp.widgets.display_widgets.vtk_backplot.vtk_backplot][DEBUG]  on_offset_table_changed (vtk_backplot.py:735)