[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4-9-rtai-686-pae (Debian 3.4.55-3linuxcnc) () (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Debian 3.4.55-3linuxcnc [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf2c9000 (usable) [ 0.000000] BIOS-e820: 00000000cf2c9000 - 00000000cf310000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cf310000 - 00000000cf313000 (reserved) [ 0.000000] BIOS-e820: 00000000cf313000 - 00000000cf31a000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cf31a000 - 00000000cf351000 (reserved) [ 0.000000] BIOS-e820: 00000000cf351000 - 00000000cf352000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cf352000 - 00000000cf355000 (reserved) [ 0.000000] BIOS-e820: 00000000cf355000 - 00000000cf361000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cf361000 - 00000000cf387000 (reserved) [ 0.000000] BIOS-e820: 00000000cf387000 - 00000000cf3ca000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cf3ca000 - 00000000cf56a000 (reserved) [ 0.000000] BIOS-e820: 00000000cf56a000 - 00000000cf6f0000 (usable) [ 0.000000] BIOS-e820: 00000000cf6f0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./AD2550B-ITX, BIOS P1.30 08/05/2013 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xcf6f0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FE0000000 write-back [ 0.000000] 2 base 120000000 mask FF0000000 write-back [ 0.000000] 3 base 0CF700000 mask FFFF00000 write-through [ 0.000000] 4 base 0CF800000 mask FFF800000 uncachable [ 0.000000] 5 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00fcca0] fcca0 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x017f8000-0x017fffff] [ 0.000000] RAMDISK: 3642e000 - 3720f000 [ 0.000000] ACPI: RSDP 000f0450 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT cf313070 0005C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP cf318f10 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT cf313158 05DB3 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS cf35ef80 00040 [ 0.000000] ACPI: APIC cf319008 00072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG cf319080 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: AAFT cf3190c0 0003A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET cf319100 00038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT cf319138 00655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: BGRT cf319790 0003C (v00 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2430MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000cf6f0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cf2c9 [ 0.000000] 0: 0x000cf56a -> 0x000cf6f0 [ 0.000000] On node 0 totalpages: 848861 [ 0.000000] free_area_init_node: node 0, pgdat c1498a00, node_mem_map f4a3e200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4862 pages used for memmap [ 0.000000] HighMem zone: 616787 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 17 pages/cpu @f77a7000 s48384 r0 d21248 u69632 [ 0.000000] pcpu-alloc: s48384 r0 d21248 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 842223 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-9-rtai-686-pae root=UUID=f74c6f01-9076-48be-a4b4-c2f4a66ba47e ro initrd=/install/initrd.gz lapic quiet rootdelay=5 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 6797056 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000cf6f0) [ 0.000000] Memory: 3341024k/3398592k available (3495k kernel code, 54420k reserved, 1237k data, 416k init, 2486596k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc14a0000 - 0xc1508000 ( 416 kB) [ 0.000000] .data : 0xc1369d0a - 0xc149f480 (1237 kB) [ 0.000000] .text : 0xc1000000 - 0xc1369d0a (3495 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f3c06000 soft=f3c08000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Interrupt pipeline (release #3) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 1866.787 MHz processor. [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.57 BogoMIPS (lpj=7467148) [ 0.000014] pid_max: default: 32768 minimum: 301 [ 0.000124] Security Framework initialized [ 0.000132] AppArmor: AppArmor disabled by boot time parameter [ 0.000177] Mount-cache hash table entries: 512 [ 0.000558] Initializing cgroup subsys cpuacct [ 0.000564] Initializing cgroup subsys memory [ 0.000582] Initializing cgroup subsys devices [ 0.000587] Initializing cgroup subsys freezer [ 0.000592] Initializing cgroup subsys net_cls [ 0.000597] Initializing cgroup subsys blkio [ 0.000613] Initializing cgroup subsys perf_event [ 0.000663] Disabled fast string operations [ 0.000670] CPU: Physical Processor ID: 0 [ 0.000674] CPU: Processor Core ID: 0 [ 0.000679] mce: CPU supports 5 MCE banks [ 0.000690] CPU0: Thermal monitoring enabled (TM1) [ 0.000763] ACPI: Core revision 20120320 [ 0.015344] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.015738] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.055393] CPU0: Intel(R) Atom(TM) CPU D2550 @ 1.86GHz stepping 01 [ 0.162687] Performance Events: PEBS fmt0+, generic architected perfmon, Intel PMU driver. [ 0.162703] ... version: 3 [ 0.162708] ... bit width: 40 [ 0.162712] ... generic registers: 2 [ 0.162717] ... value mask: 000000ffffffffff [ 0.162722] ... max period: 000000007fffffff [ 0.162726] ... fixed-purpose events: 3 [ 0.162731] ... event mask: 0000000700000003 [ 0.175001] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.186711] CPU 1 irqstacks, hard=f3cd4000 soft=f3cd6000 [ 0.186717] Booting Node 0, Processors #1 [ 0.196752] Initializing CPU#1 [ 0.197659] Disabled fast string operations [ 0.199822] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.206698] CPU 2 irqstacks, hard=f3d04000 soft=f3d06000 [ 0.206704] #2 [ 0.216651] Initializing CPU#2 [ 0.217636] Disabled fast string operations [ 0.219776] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.226670] CPU 3 irqstacks, hard=f3d16000 soft=f3d18000 [ 0.226676] #3 Ok. [ 0.236626] Initializing CPU#3 [ 0.237609] Disabled fast string operations [ 0.239751] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.239822] Brought up 4 CPUs [ 0.239829] Total of 4 processors activated (14934.29 BogoMIPS). [ 0.240938] devtmpfs: initialized [ 0.241491] PM: Registering ACPI NVS region [mem 0xcf2c9000-0xcf30ffff] (290816 bytes) [ 0.241519] PM: Registering ACPI NVS region [mem 0xcf351000-0xcf351fff] (4096 bytes) [ 0.241526] PM: Registering ACPI NVS region [mem 0xcf355000-0xcf360fff] (49152 bytes) [ 0.241536] PM: Registering ACPI NVS region [mem 0xcf387000-0xcf3c9fff] (274432 bytes) [ 0.241796] dummy: [ 0.241960] NET: Registered protocol family 16 [ 0.242251] ACPI: bus type pci registered [ 0.242391] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.242400] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.242405] PCI: Using MMCONFIG for extended config space [ 0.242410] PCI: Using configuration type 1 for base access [ 0.244368] bio: create slab at 0 [ 0.244665] ACPI: Added _OSI(Module Device) [ 0.244672] ACPI: Added _OSI(Processor Device) [ 0.244678] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.244684] ACPI: Added _OSI(Processor Aggregator Device) [ 0.248492] ACPI: EC: Look up EC in DSDT [ 0.253101] ACPI: Executed 1 blocks of module-level executable AML code [ 0.258650] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.262218] ACPI: Interpreter enabled [ 0.262238] ACPI: (supports S0 S1 S3 S4 S5) [ 0.262308] ACPI: Using IOAPIC for interrupt routing [ 0.280093] ACPI: No dock devices found. [ 0.280106] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.280564] \_SB_.PCI0:_OSC invalid UUID [ 0.280569] _OSC request data:1 8 0 [ 0.280583] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.281079] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.281087] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.281094] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.281101] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.281107] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000effff] [ 0.281113] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] [ 0.281120] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfebfffff] [ 0.281219] PCI host bridge to bus 0000:00 [ 0.281226] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.281233] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.281239] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.281245] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.281252] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff] [ 0.281258] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff] [ 0.281265] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff] [ 0.281287] pci 0000:00:00.0: [8086:0bf3] type 00 class 0x060000 [ 0.281362] pci 0000:00:02.0: [8086:0be2] type 00 class 0x030000 [ 0.281384] pci 0000:00:02.0: reg 10: [mem 0xdfc00000-0xdfcfffff] [ 0.281396] pci 0000:00:02.0: reg 14: [io 0xf0f0-0xf0f7] [ 0.281517] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.281546] pci 0000:00:1b.0: reg 10: [mem 0xdff00000-0xdff03fff 64bit] [ 0.281638] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.281689] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.281784] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.281835] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.281902] pci 0000:00:1d.0: reg 20: [io 0xf080-0xf09f] [ 0.281957] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.282024] pci 0000:00:1d.1: reg 20: [io 0xf060-0xf07f] [ 0.282076] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.282142] pci 0000:00:1d.2: reg 20: [io 0xf040-0xf05f] [ 0.282198] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.282265] pci 0000:00:1d.3: reg 20: [io 0xf020-0xf03f] [ 0.282331] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.282363] pci 0000:00:1d.7: reg 10: [mem 0xdff05000-0xdff053ff] [ 0.282472] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.282511] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.282625] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100 [ 0.282791] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f [ 0.282817] pci 0000:00:1f.2: reg 10: [io 0xf0e0-0xf0e7] [ 0.282833] pci 0000:00:1f.2: reg 14: [io 0xf0d0-0xf0d3] [ 0.282849] pci 0000:00:1f.2: reg 18: [io 0xf0c0-0xf0c7] [ 0.282865] pci 0000:00:1f.2: reg 1c: [io 0xf0b0-0xf0b3] [ 0.282881] pci 0000:00:1f.2: reg 20: [io 0xf0a0-0xf0af] [ 0.282898] pci 0000:00:1f.2: reg 24: [mem 0xdff04000-0xdff043ff] [ 0.282939] pci 0000:00:1f.2: PME# supported from D3hot [ 0.282967] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.283044] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f] [ 0.283189] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 [ 0.283217] pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff] [ 0.283260] pci 0000:01:00.0: reg 18: [mem 0xdfe04000-0xdfe04fff 64bit pref] [ 0.283289] pci 0000:01:00.0: reg 20: [mem 0xdfe00000-0xdfe03fff 64bit pref] [ 0.283362] pci 0000:01:00.0: supports D1 D2 [ 0.283368] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.290587] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.290598] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.290607] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff] [ 0.290666] pci 0000:02:00.0: [2718:5125] type 00 class 0x110000 [ 0.290691] pci 0000:02:00.0: reg 10: [mem 0xdfd00000-0xdfd0ffff] [ 0.290840] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.290853] pci 0000:00:1e.0: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.290866] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.290872] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.290879] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.290886] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.290893] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode) [ 0.290900] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode) [ 0.290908] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode) [ 0.290929] pci_bus 0000:00: on NUMA node 0 [ 0.290938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.291217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.291410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.291719] \_SB_.PCI0:_OSC invalid UUID [ 0.291725] _OSC request data:1 f 0 [ 0.291738] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f) [ 0.302160] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.302328] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.302491] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.302669] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.302832] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.302997] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.303159] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.303323] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *3 4 5 6 7 11 12 14 15) [ 0.303551] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.303574] vgaarb: loaded [ 0.303578] vgaarb: bridge control possible 0000:00:02.0 [ 0.303677] PCI: Using ACPI for IRQ routing [ 0.312954] PCI: pci_cache_line_size set to 64 bytes [ 0.313069] reserve RAM buffer: 000000000009ec00 - 000000000009ffff [ 0.313076] reserve RAM buffer: 00000000cf2c9000 - 00000000cfffffff [ 0.313083] reserve RAM buffer: 00000000cf6f0000 - 00000000cfffffff [ 0.313386] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.313401] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.315444] Switching to clocksource hpet [ 0.315625] pnp: PnP ACPI init [ 0.315663] ACPI: bus type pnp registered [ 0.315984] pnp 00:00: [bus 00-ff] [ 0.315992] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.315999] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.316005] pnp 00:00: [io 0x0d00-0xffff window] [ 0.316011] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.316017] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.316024] pnp 00:00: [mem 0x000e0000-0x000effff window] [ 0.316030] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.316036] pnp 00:00: [mem 0x00000000 window] [ 0.316042] pnp 00:00: [mem 0xd0000000-0xfebfffff window] [ 0.316171] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.316220] pnp 00:01: [io 0x0000-0x001f] [ 0.316226] pnp 00:01: [io 0x0081-0x0091] [ 0.316232] pnp 00:01: [io 0x0093-0x009f] [ 0.316237] pnp 00:01: [io 0x00c0-0x00df] [ 0.316244] pnp 00:01: [dma 4] [ 0.316303] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.316333] pnp 00:02: [mem 0xff000000-0xffffffff] [ 0.316398] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.316603] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.316707] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.316717] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.316753] pnp 00:04: [io 0x00f0] [ 0.316773] pnp 00:04: [irq 13] [ 0.316845] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.316880] pnp 00:05: [io 0x002e-0x002f] [ 0.316887] pnp 00:05: [io 0x004e-0x004f] [ 0.316892] pnp 00:05: [io 0x0061] [ 0.316897] pnp 00:05: [io 0x0063] [ 0.316902] pnp 00:05: [io 0x0065] [ 0.316908] pnp 00:05: [io 0x0067] [ 0.316913] pnp 00:05: [io 0x0070] [ 0.316918] pnp 00:05: [io 0x0080] [ 0.316923] pnp 00:05: [io 0x0092] [ 0.316928] pnp 00:05: [io 0x00b2-0x00b3] [ 0.316934] pnp 00:05: [io 0x0680-0x069f] [ 0.316940] pnp 00:05: [io 0xffff] [ 0.316945] pnp 00:05: [io 0xffff] [ 0.316950] pnp 00:05: [io 0xffff] [ 0.316955] pnp 00:05: [io 0x0400-0x047f] [ 0.316961] pnp 00:05: [io 0x0500-0x057f] [ 0.316966] pnp 00:05: [io 0x0600-0x061f] [ 0.317075] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.317083] system 00:05: [io 0xffff] has been reserved [ 0.317090] system 00:05: [io 0xffff] has been reserved [ 0.317097] system 00:05: [io 0xffff] has been reserved [ 0.317104] system 00:05: [io 0x0400-0x047f] has been reserved [ 0.317111] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.317118] system 00:05: [io 0x0600-0x061f] has been reserved [ 0.317127] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.317208] pnp 00:06: [io 0x06a0-0x06af] [ 0.317214] pnp 00:06: [io 0x06b0-0x06ff] [ 0.317307] system 00:06: [io 0x06a0-0x06af] has been reserved [ 0.317315] system 00:06: [io 0x06b0-0x06ff] has been reserved [ 0.317323] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.317353] pnp 00:07: [io 0x0070-0x0077] [ 0.317366] pnp 00:07: [irq 8] [ 0.317430] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.317613] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 0.317620] pnp 00:08: [io 0x0290-0x029f] [ 0.317626] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 0.317728] system 00:08: [io 0x0290-0x029f] has been reserved [ 0.317736] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.318946] pnp 00:09: [io 0x0378-0x037f] [ 0.318953] pnp 00:09: [io 0x0778-0x077f] [ 0.318968] pnp 00:09: [irq 5] [ 0.318974] pnp 00:09: [dma 3] [ 0.319383] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.320128] pnp 00:0a: [io 0x03f8-0x03ff] [ 0.320142] pnp 00:0a: [irq 4] [ 0.320148] pnp 00:0a: [dma 0 disabled] [ 0.320298] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.320972] pnp 00:0b: [io 0x0010-0x001f] [ 0.320979] pnp 00:0b: [io 0x0022-0x003f] [ 0.320984] pnp 00:0b: [io 0x0044-0x005f] [ 0.320990] pnp 00:0b: [io 0x0062-0x0063] [ 0.320996] pnp 00:0b: [io 0x0065-0x006f] [ 0.321001] pnp 00:0b: [io 0x0072-0x007f] [ 0.321006] pnp 00:0b: [io 0x0080] [ 0.321012] pnp 00:0b: [io 0x0084-0x0086] [ 0.321017] pnp 00:0b: [io 0x0088] [ 0.321023] pnp 00:0b: [io 0x008c-0x008e] [ 0.321028] pnp 00:0b: [io 0x0090-0x009f] [ 0.321034] pnp 00:0b: [io 0x00a2-0x00bf] [ 0.321039] pnp 00:0b: [io 0x00e0-0x00ef] [ 0.321045] pnp 00:0b: [io 0x04d0-0x04d1] [ 0.321166] system 00:0b: [io 0x04d0-0x04d1] has been reserved [ 0.321176] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.321523] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff] [ 0.321530] pnp 00:0c: [mem 0x00000000-0x00003fff] [ 0.321537] pnp 00:0c: [mem 0x00000000-0x00000fff] [ 0.321542] pnp 00:0c: [mem 0x00000000-0x00000fff] [ 0.321548] pnp 00:0c: [mem 0x00000000-0xffffffff disabled] [ 0.321554] pnp 00:0c: [mem 0xfed45000-0xfed8ffff] [ 0.321688] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.321696] system 00:0c: [mem 0x00000000-0x00003fff] could not be reserved [ 0.321704] system 00:0c: [mem 0x00000000-0x00000fff] could not be reserved [ 0.321712] system 00:0c: [mem 0x00000000-0x00000fff] could not be reserved [ 0.321720] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.321728] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.322185] pnp 00:0d: [mem 0xfed14000-0xfed19fff] [ 0.322192] pnp 00:0d: [mem 0xe0000000-0xefffffff] [ 0.322334] system 00:0d: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.322342] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 0.322351] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.322381] pnp 00:0e: [mem 0xff000000-0xffffffff] [ 0.322489] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active) [ 0.322863] pnp 00:0f: [io 0x0400-0x047f] [ 0.322870] pnp 00:0f: [io 0x0500-0x053f] [ 0.322876] pnp 00:0f: [mem 0xfec00000-0xfec00fff] [ 0.322882] pnp 00:0f: [mem 0xfee00000-0xfee00fff] [ 0.322888] pnp 00:0f: [mem 0xfed1c000-0xfed1ffff] [ 0.322893] pnp 00:0f: [mem 0xfed20000-0xfed8ffff] [ 0.322899] pnp 00:0f: [mem 0xffe00000-0xffffffff] [ 0.323040] system 00:0f: [io 0x0400-0x047f] has been reserved [ 0.323048] system 00:0f: [io 0x0500-0x053f] has been reserved [ 0.323056] system 00:0f: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.323063] system 00:0f: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.323071] system 00:0f: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.323079] system 00:0f: [mem 0xfed20000-0xfed8ffff] could not be reserved [ 0.323086] system 00:0f: [mem 0xffe00000-0xffffffff] has been reserved [ 0.323095] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.323105] pnp: PnP ACPI: found 16 devices [ 0.323109] ACPI: ACPI bus type pnp unregistered [ 0.323115] PnPBIOS: Disabled by ACPI PNP [ 0.364243] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000 [ 0.364271] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.364285] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.364293] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.364301] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.364312] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff] [ 0.364322] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.364335] pci 0000:00:1e.0: PCI bridge to [bus 02-02] [ 0.364346] pci 0000:00:1e.0: bridge window [mem 0xdfd00000-0xdfdfffff] [ 0.364401] pci 0000:00:1e.0: setting latency timer to 64 [ 0.364410] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.364416] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.364422] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.364428] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.364435] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff] [ 0.364441] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff] [ 0.364447] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xfebfffff] [ 0.364454] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.364460] pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff] [ 0.364467] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.364473] pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff] [ 0.364480] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.364486] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.364492] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.364498] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff] [ 0.364504] pci_bus 0000:02: resource 8 [mem 0x000e0000-0x000effff] [ 0.364511] pci_bus 0000:02: resource 9 [mem 0x000f0000-0x000fffff] [ 0.364517] pci_bus 0000:02: resource 10 [mem 0xd0000000-0xfebfffff] [ 0.364745] NET: Registered protocol family 2 [ 0.364887] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.365374] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.366194] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.366582] TCP: Hash tables configured (established 131072 bind 65536) [ 0.366590] TCP: reno registered [ 0.366600] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.366618] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.366892] NET: Registered protocol family 1 [ 0.366929] pci 0000:00:02.0: Boot video device [ 0.367273] PCI: CLS 64 bytes, default 64 [ 0.367399] Unpacking initramfs... [ 0.934715] Freeing initrd memory: 14212k freed [ 0.948092] audit: initializing netlink socket (disabled) [ 0.948132] type=2000 audit(1414955105.836:1): initialized [ 0.970639] highmem bounce pool size: 64 pages [ 0.970651] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.971268] VFS: Disk quotas dquot_6.5.2 [ 0.971340] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.971519] msgmni has been set to 1696 [ 0.971935] alg: No test for stdrng (krng) [ 0.972020] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.972028] io scheduler noop registered [ 0.972033] io scheduler deadline registered [ 0.972097] io scheduler cfq registered (default) [ 0.972405] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.972456] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.972461] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.973302] GHES: HEST is not enabled! [ 0.973332] isapnp: Scanning for PnP cards... [ 1.326973] isapnp: No Plug & Play device found [ 1.327101] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.347620] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.368803] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.369419] Linux agpgart interface v0.103 [ 1.369887] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.372642] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.372719] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.373020] mousedev: PS/2 mouse device common for all mice [ 1.373130] rtc_cmos 00:07: RTC can wake from S4 [ 1.373363] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.373404] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.373689] TCP: cubic registered [ 1.373868] NET: Registered protocol family 10 [ 1.374354] Mobile IPv6 [ 1.374361] NET: Registered protocol family 17 [ 1.374373] Registering the dns_resolver key type [ 1.374502] Using IPI No-Shortcut mode [ 1.374797] PM: Hibernation image not present or could not be loaded. [ 1.374829] registered taskstats version 1 [ 1.375527] rtc_cmos 00:07: setting system clock to 2014-11-02 19:05:06 UTC (1414955106) [ 1.375872] Freeing unused kernel memory: 416k freed [ 1.376255] Write protecting the kernel text: 3496k [ 1.376311] Write protecting the kernel read-only data: 984k [ 1.404634] udevd[57]: starting version 175 [ 1.447723] usbcore: registered new interface driver usbfs [ 1.447803] usbcore: registered new interface driver hub [ 1.450605] usbcore: registered new device driver usb [ 1.452038] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.452215] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.452228] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.452309] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.452374] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.452401] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.456554] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.456621] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff05000 [ 1.466398] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.466531] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.466543] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.466553] usb usb1: Product: EHCI Host Controller [ 1.466561] usb usb1: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 1.466569] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.468873] hub 1-0:1.0: USB hub found [ 1.468897] hub 1-0:1.0: 8 ports detected [ 1.470300] uhci_hcd: USB Universal Host Controller Interface driver [ 1.470460] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.470474] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.470523] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.470587] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 [ 1.470722] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.470734] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.470744] usb usb2: Product: UHCI Host Controller [ 1.470752] usb usb2: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 1.470760] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.471746] hub 2-0:1.0: USB hub found [ 1.471766] hub 2-0:1.0: 2 ports detected [ 1.472064] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.472077] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.472118] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.472217] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 [ 1.472350] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.472362] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.472372] usb usb3: Product: UHCI Host Controller [ 1.472385] usb usb3: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 1.472393] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.476348] hub 3-0:1.0: USB hub found [ 1.476369] hub 3-0:1.0: 2 ports detected [ 1.476652] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.476666] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.476696] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.476799] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 [ 1.476932] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.476943] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.476954] usb usb4: Product: UHCI Host Controller [ 1.476963] usb usb4: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 1.476974] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.477686] hub 4-0:1.0: USB hub found [ 1.477716] hub 4-0:1.0: 2 ports detected [ 1.478010] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.478026] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.478060] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.478165] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020 [ 1.478394] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.478404] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.478415] usb usb5: Product: UHCI Host Controller [ 1.478423] usb usb5: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd [ 1.478431] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.484093] hub 5-0:1.0: USB hub found [ 1.484117] hub 5-0:1.0: 2 ports detected [ 1.487110] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.487778] r8169 0000:01:00.0: eth0: RTL8105e at 0xf800e000, bc:5f:f4:e8:a7:3c, XID 00a00000 IRQ 16 [ 1.492802] SCSI subsystem initialized [ 1.505737] libata version 3.00 loaded. [ 1.506928] ata_piix 0000:00:1f.2: version 2.13 [ 1.506973] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.534359] microcode: CPU0 sig=0x30661, pf=0x4, revision=0x10d [ 1.586672] microcode: CPU1 sig=0x30661, pf=0x4, revision=0x10d [ 1.592291] microcode: CPU2 sig=0x30661, pf=0x4, revision=0x10d [ 1.598020] microcode: CPU3 sig=0x30661, pf=0x4, revision=0x10d [ 1.604675] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.662163] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.662951] scsi0 : ata_piix [ 1.663280] scsi1 : ata_piix [ 1.663413] ata1: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19 [ 1.663420] ata2: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19 [ 1.778028] usb 1-3: new high-speed USB device number 2 using ehci_hcd [ 1.850262] ata1.00: ATA-8: ST500LM012 HN-M500MBB, 2BA30001, max UDMA/133 [ 1.850271] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.858255] ata1.00: configured for UDMA/133 [ 1.858531] scsi 0:0:0:0: Direct-Access ATA ST500LM012 HN-M5 2BA3 PQ: 0 ANSI: 5 [ 1.868110] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.868120] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.868374] sd 0:0:0:0: [sda] Write Protect is off [ 1.868386] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.868496] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.910503] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101 [ 1.910512] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.910519] usb 1-3: Product: USB 2.0 Hub [ 1.910973] hub 1-3:1.0: USB hub found [ 1.911123] hub 1-3:1.0: 4 ports detected [ 1.937210] sda: sda1 sda2 < sda5 > [ 1.938307] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.942379] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.945882] Refined TSC clocksource calibration: 1866.732 MHz. [ 1.945901] Switching to clocksource tsc [ 2.021779] usb 1-5: new high-speed USB device number 3 using ehci_hcd [ 2.155899] usb 1-5: New USB device found, idVendor=090c, idProduct=1000 [ 2.155911] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.155921] usb 1-5: Product: USB DISK [ 2.155928] usb 1-5: Manufacturer: SMI Corporation [ 2.155937] usb 1-5: SerialNumber: 00130905091545PRLE5O [ 2.163737] Initializing USB Mass Storage driver... [ 2.164055] scsi2 : usb-storage 1-5:1.0 [ 2.164268] usbcore: registered new interface driver usb-storage [ 2.164277] USB Mass Storage support registered. [ 2.265534] usb 1-6: new high-speed USB device number 4 using ehci_hcd [ 2.400026] usb 1-6: New USB device found, idVendor=0bda, idProduct=8171 [ 2.400035] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.400042] usb 1-6: Product: RTL8188S WLAN Adapter [ 2.400048] usb 1-6: Manufacturer: Manufacturer Realtek [ 2.400053] usb 1-6: SerialNumber: 00e04c000001 [ 2.489444] usb 1-3.3: new low-speed USB device number 5 using ehci_hcd [ 2.604821] usb 1-3.3: New USB device found, idVendor=0510, idProduct=1004 [ 2.604829] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.604836] usb 1-3.3: Product: SEJIN USB Mini Trackball Keyboard [ 2.604842] usb 1-3.3: Manufacturer: SEJIN [ 2.622099] input: SEJIN SEJIN USB Mini Trackball Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.3/1-3.3:1.0/input/input0 [ 2.622345] generic-usb 0003:0510:1004.0001: input,hidraw0: USB HID v1.10 Keyboard [SEJIN SEJIN USB Mini Trackball Keyboard] on usb-0000:00:1d.7-3.3/input0 [ 2.625763] input: SEJIN SEJIN USB Mini Trackball Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.3/1-3.3:1.1/input/input1 [ 2.626108] generic-usb 0003:0510:1004.0002: input,hidraw1: USB HID v1.10 Mouse [SEJIN SEJIN USB Mini Trackball Keyboard] on usb-0000:00:1d.7-3.3/input1 [ 2.626192] usbcore: registered new interface driver usbhid [ 2.626200] usbhid: USB HID core driver [ 2.697245] usb 1-3.4: new full-speed USB device number 6 using ehci_hcd [ 2.806376] usb 1-3.4: New USB device found, idVendor=093a, idProduct=8002 [ 2.806385] usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=4 [ 2.806392] usb 1-3.4: Product: OpticalTouchScreen [ 2.806397] usb 1-3.4: Manufacturer: PixArtImaging [ 2.806402] usb 1-3.4: SerialNumber: 0000 [ 3.576554] scsi 2:0:0:0: Direct-Access USB2.0 Flash Disk 1100 PQ: 0 ANSI: 4 [ 3.578030] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.578669] sd 2:0:0:0: [sdb] 3911680 512-byte logical blocks: (2.00 GB/1.86 GiB) [ 3.579424] sd 2:0:0:0: [sdb] Write Protect is off [ 3.579438] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 3.580158] sd 2:0:0:0: [sdb] No Caching mode page present [ 3.580240] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 3.583922] sd 2:0:0:0: [sdb] No Caching mode page present [ 3.583972] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 3.585147] sdb: [ 3.587796] sd 2:0:0:0: [sdb] No Caching mode page present [ 3.587852] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 3.587903] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 7.198922] PM: Starting manual resume from disk [ 7.198930] PM: Hibernation image partition 8:5 present [ 7.198935] PM: Looking for hibernation image. [ 7.199227] PM: Image not found (code -22) [ 7.199232] PM: Hibernation image not present or could not be loaded. [ 7.359508] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 9.380666] udevd[391]: starting version 175 [ 9.682668] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 9.682689] ACPI: Power Button [PWRB] [ 9.682870] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 9.682887] ACPI: Sleep Button [SLPB] [ 9.683070] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 9.683084] ACPI: Power Button [PWRF] [ 9.789365] coretemp coretemp.0: Unable to read TjMax from CPU 0 [ 9.789401] coretemp coretemp.0: Unable to read TjMax from CPU 2 [ 10.023851] parport_pc 00:09: reported by Plug and Play ACPI [ 10.023933] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE] [ 10.289087] iTCO_vendor_support: vendor-support=0 [ 10.323052] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 10.323303] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460) [ 10.324038] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.429976] input: PixArtImaging OpticalTouchScreen as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.4/1-3.4:1.0/input/input5 [ 10.430575] hid-multitouch 0003:093A:8002.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [PixArtImaging OpticalTouchScreen] on usb-0000:00:1d.7-3.4/input0 [ 10.575432] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 10.575691] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 10.575895] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 10.686760] r8712u: module is from the staging directory, the quality is unknown, you have been warned. [ 10.688066] r8712u: DriverVersion: v7_0.20100831 [ 10.688121] r8712u: register rtl8712_netdev_ops to netdev_ops [ 10.688132] r8712u: USB_SPEED_HIGH with 4 endpoints [ 10.688824] r8712u: Boot from EFUSE: Autoload OK [ 11.328570] r8712u: CustomerID = 0x0000 [ 11.328579] r8712u: MAC Address from efuse = 00:13:33:b7:c1:01 [ 11.328585] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" [ 11.328743] usbcore: registered new interface driver r8712u [ 12.719207] Adding 8361980k swap on /dev/sda5. Priority:-1 extents:1 across:8361980k [ 12.752741] EXT4-fs (sda1): re-mounted. Opts: (null) [ 13.053483] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 13.233906] loop: module loaded [ 15.148397] RPC: Registered named UNIX socket transport module. [ 15.148409] RPC: Registered udp transport module. [ 15.148414] RPC: Registered tcp transport module. [ 15.148420] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 15.197459] FS-Cache: Loaded [ 15.229203] NFS: Registering the id_resolver key type [ 15.229257] FS-Cache: Netfs 'nfs' registered for caching [ 15.237856] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 17.825584] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9 [ 18.601858] Bluetooth: Core ver 2.16 [ 18.601907] NET: Registered protocol family 31 [ 18.601914] Bluetooth: HCI device and connection manager initialized [ 18.601920] Bluetooth: HCI socket layer initialized [ 18.601926] Bluetooth: L2CAP socket layer initialized [ 18.601941] Bluetooth: SCO socket layer initialized [ 18.682792] Bluetooth: RFCOMM TTY layer initialized [ 18.682812] Bluetooth: RFCOMM socket layer initialized [ 18.682821] Bluetooth: RFCOMM ver 1.11 [ 18.730131] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.730143] Bluetooth: BNEP filters: protocol multicast [ 19.229201] lp0: using parport0 (interrupt-driven). [ 19.443559] ppdev: user-space parallel port driver [ 21.369141] r8169 0000:01:00.0: eth0: link down [ 21.369531] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.086078] r8712u: 1 RCR=0x153f00e [ 22.086833] r8712u: 2 RCR=0x553f00e [ 22.194238] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 43.535504] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 57.633715] wlan0: no IPv6 routers present [ 74.746339] FAT-fs (sdb): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 184.586722] I-pipe: head domain RTAI registered. [ 184.586735] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 184.586874] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 184.586883] SYSINFO: CPUs 4, LINUX APIC IRQ 2312, TIM_FREQ 8332989, CLK_FREQ 1866787000, CPU_FREQ 1866787000 [ 184.586890] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 184.586898] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 8332989, 8332989, 8254500 [ 184.621288] RTAI[malloc]: global heap size = 2097152 bytes, . [ 184.621403] , , kstacks pool size = 524288 bytes. [ 184.621415] RTAI[sched]: hard timer type/freq = APIC/8332989(Hz); default timing: oneshot; linear timed lists. [ 184.621423] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 1866787000 hz. [ 184.621429] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns. [ 184.651460] RTAI[math]: loaded. [ 184.909818] hm2: loading Mesa HostMot2 driver version 0.15 [ 184.930005] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 184.930103] hm2_pci: discovered 5i25 at 0000:02:00.0 [ 184.932439] hm2/hm2_5i25.0: Smart Serial Firmware Version 43 [ 184.989419] Board hm2_5i25.0.7i76.0.0 Hardware Mode 0 = standard [ 184.991620] Board hm2_5i25.0.7i76.0.0 Software Mode 0 = io_spin [ 184.994274] Board hm2_5i25.0.7i76.0.0 Software Mode 1 = io_ana_spin [ 184.998060] Board hm2_5i25.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv [ 185.149396] hm2/hm2_5i25.0: 34 I/O Pins used: [ 185.149406] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 185.149414] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 185.149421] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 185.149428] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 185.149435] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 185.149442] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 185.149449] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 185.149456] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 185.149463] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 185.149470] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 185.149478] hm2/hm2_5i25.0: IO Pin 010 (P3-07): Smart Serial Interface #0, pin TxData0 (Output) [ 185.149485] hm2/hm2_5i25.0: IO Pin 011 (P3-08): Smart Serial Interface #0, pin RxData0 (Input) [ 185.149492] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 185.149498] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 185.149505] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Muxed Encoder #0, pin Muxed Index (Input) [ 185.149512] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Muxed Encoder #0, pin Muxed B (Input) [ 185.149519] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Muxed Encoder #0, pin Muxed A (Input) [ 185.149552] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 185.149561] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 185.149570] hm2/hm2_5i25.0: IO Pin 019 (P2-02): StepGen #8, pin Step (Output) [ 185.149580] hm2/hm2_5i25.0: IO Pin 020 (P2-15): StepGen #8, pin Direction (Output) [ 185.149589] hm2/hm2_5i25.0: IO Pin 021 (P2-03): StepGen #7, pin Step (Output) [ 185.149599] hm2/hm2_5i25.0: IO Pin 022 (P2-16): StepGen #7, pin Direction (Output) [ 185.149608] hm2/hm2_5i25.0: IO Pin 023 (P2-04): StepGen #6, pin Step (Output) [ 185.149617] hm2/hm2_5i25.0: IO Pin 024 (P2-17): StepGen #6, pin Direction (Output) [ 185.149627] hm2/hm2_5i25.0: IO Pin 025 (P2-05): StepGen #5, pin Step (Output) [ 185.149636] hm2/hm2_5i25.0: IO Pin 026 (P2-06): StepGen #5, pin Direction (Output) [ 185.149646] hm2/hm2_5i25.0: IO Pin 027 (P2-07): Muxed Encoder Select #2, pin Mux Select 0 (Output) [ 185.149656] hm2/hm2_5i25.0: IO Pin 028 (P2-08): Muxed Encoder #1, pin Muxed A (Input) [ 185.149666] hm2/hm2_5i25.0: IO Pin 029 (P2-09): Muxed Encoder #1, pin Muxed B (Input) [ 185.149676] hm2/hm2_5i25.0: IO Pin 030 (P2-10): Muxed Encoder #1, pin Muxed Index (Input) [ 185.149685] hm2/hm2_5i25.0: IO Pin 031 (P2-11): Muxed Encoder #2, pin Muxed A (Input) [ 185.149695] hm2/hm2_5i25.0: IO Pin 032 (P2-12): Muxed Encoder #2, pin Muxed B (Input) [ 185.149705] hm2/hm2_5i25.0: IO Pin 033 (P2-13): Muxed Encoder #2, pin Muxed Index (Input) [ 185.149955] hm2/hm2_5i25.0: registered [ 185.149963] hm2_5i25.0: initialized AnyIO board at 0000:02:00.0 [ 437.830500] [ 437.830514] In recent history there were [ 437.830517] 1981973, 1567216, 1989890, 1897182, and 1887235 [ 437.830520] elapsed clocks between calls to the motion controller. [ 437.830538] This time, there were 1905694 which is so anomalously [ 437.830541] large that it probably signifies a problem with your [ 437.830544] realtime configuration. For the rest of this run of [ 437.830547] EMC, this message will be suppressed. [ 437.830550] [ 438.606944] hm2_5i25.0: dropping AnyIO board at 0000:02:00.0 [ 438.606956] hm2/hm2_5i25.0: unregistered [ 438.607054] hm2_pci: driver unloaded [ 438.610965] hm2: unloading [ 440.877793] RTAI[math]: unloaded. [ 440.881972] SCHED releases registered named ALIEN PEDV$D [ 440.890512] RTAI[malloc]: unloaded. [ 440.987411] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 440.991254] I-pipe: head domain RTAI unregistered. [ 440.991542] RTAI[hal]: unmounted. [ 456.898226] I-pipe: head domain RTAI registered. [ 456.898243] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 456.898388] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 456.898400] SYSINFO: CPUs 4, LINUX APIC IRQ 2312, TIM_FREQ 8332989, CLK_FREQ 1866787000, CPU_FREQ 1866787000 [ 456.898410] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 456.898421] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 8332989, 8332989, 8251250 [ 456.916282] RTAI[malloc]: global heap size = 2097152 bytes, . [ 456.916389] , , kstacks pool size = 524288 bytes. [ 456.916400] RTAI[sched]: hard timer type/freq = APIC/8332989(Hz); default timing: oneshot; linear timed lists. [ 456.916408] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 1866787000 hz. [ 456.916414] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns. [ 456.936349] RTAI[math]: loaded. [ 457.133365] hm2: loading Mesa HostMot2 driver version 0.15 [ 457.137466] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 457.137527] hm2_pci: discovered 5i25 at 0000:02:00.0 [ 457.139763] hm2/hm2_5i25.0: Smart Serial Firmware Version 43 [ 457.196595] Board hm2_5i25.0.7i76.0.0 Hardware Mode 0 = standard [ 457.198774] Board hm2_5i25.0.7i76.0.0 Software Mode 0 = io_spin [ 457.201372] Board hm2_5i25.0.7i76.0.0 Software Mode 1 = io_ana_spin [ 457.205103] Board hm2_5i25.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv [ 457.357717] hm2/hm2_5i25.0: 34 I/O Pins used: [ 457.357727] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 457.357735] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 457.357742] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 457.357749] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 457.357756] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 457.357763] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 457.357770] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 457.357777] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 457.357784] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 457.357791] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 457.357799] hm2/hm2_5i25.0: IO Pin 010 (P3-07): Smart Serial Interface #0, pin TxData0 (Output) [ 457.357807] hm2/hm2_5i25.0: IO Pin 011 (P3-08): Smart Serial Interface #0, pin RxData0 (Input) [ 457.357813] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 457.357819] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 457.357826] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Muxed Encoder #0, pin Muxed Index (Input) [ 457.357834] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Muxed Encoder #0, pin Muxed B (Input) [ 457.357841] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Muxed Encoder #0, pin Muxed A (Input) [ 457.357847] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 457.357853] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 457.357859] hm2/hm2_5i25.0: IO Pin 019 (P2-02): StepGen #8, pin Step (Output) [ 457.357867] hm2/hm2_5i25.0: IO Pin 020 (P2-15): StepGen #8, pin Direction (Output) [ 457.357874] hm2/hm2_5i25.0: IO Pin 021 (P2-03): StepGen #7, pin Step (Output) [ 457.357881] hm2/hm2_5i25.0: IO Pin 022 (P2-16): StepGen #7, pin Direction (Output) [ 457.357888] hm2/hm2_5i25.0: IO Pin 023 (P2-04): StepGen #6, pin Step (Output) [ 457.357895] hm2/hm2_5i25.0: IO Pin 024 (P2-17): StepGen #6, pin Direction (Output) [ 457.357902] hm2/hm2_5i25.0: IO Pin 025 (P2-05): StepGen #5, pin Step (Output) [ 457.357909] hm2/hm2_5i25.0: IO Pin 026 (P2-06): StepGen #5, pin Direction (Output) [ 457.357916] hm2/hm2_5i25.0: IO Pin 027 (P2-07): Muxed Encoder Select #2, pin Mux Select 0 (Output) [ 457.357924] hm2/hm2_5i25.0: IO Pin 028 (P2-08): Muxed Encoder #1, pin Muxed A (Input) [ 457.357931] hm2/hm2_5i25.0: IO Pin 029 (P2-09): Muxed Encoder #1, pin Muxed B (Input) [ 457.357938] hm2/hm2_5i25.0: IO Pin 030 (P2-10): Muxed Encoder #1, pin Muxed Index (Input) [ 457.357945] hm2/hm2_5i25.0: IO Pin 031 (P2-11): Muxed Encoder #2, pin Muxed A (Input) [ 457.357953] hm2/hm2_5i25.0: IO Pin 032 (P2-12): Muxed Encoder #2, pin Muxed B (Input) [ 457.357960] hm2/hm2_5i25.0: IO Pin 033 (P2-13): Muxed Encoder #2, pin Muxed Index (Input) [ 457.358142] hm2/hm2_5i25.0: registered [ 457.358148] hm2_5i25.0: initialized AnyIO board at 0000:02:00.0 [ 459.304906] [ 459.304914] In recent history there were [ 459.304916] 1810396, 1882629, 1884673, 1919589, and 1653610 [ 459.304919] elapsed clocks between calls to the motion controller. [ 459.304927] This time, there were 1984913 which is so anomalously [ 459.304930] large that it probably signifies a problem with your [ 459.304932] realtime configuration. For the rest of this run of [ 459.304936] EMC, this message will be suppressed. [ 459.304939] [ 468.594053] hm2_5i25.0: dropping AnyIO board at 0000:02:00.0 [ 468.594064] hm2/hm2_5i25.0: unregistered [ 468.594163] hm2_pci: driver unloaded [ 468.598092] hm2: unloading [ 470.809152] RTAI[math]: unloaded. [ 470.813255] SCHED releases registered named ALIEN PEDV$D [ 470.823061] RTAI[malloc]: unloaded. [ 470.921253] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 470.925246] I-pipe: head domain RTAI unregistered. [ 470.925459] RTAI[hal]: unmounted. [ 473.956290] I-pipe: head domain RTAI registered. [ 473.956304] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 473.956442] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 473.956452] SYSINFO: CPUs 4, LINUX APIC IRQ 2312, TIM_FREQ 8332989, CLK_FREQ 1866787000, CPU_FREQ 1866787000 [ 473.956459] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 473.956467] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 8332989, 8332989, 8248000 [ 473.971606] RTAI[malloc]: global heap size = 2097152 bytes, . [ 473.971706] , , kstacks pool size = 524288 bytes. [ 473.971717] RTAI[sched]: hard timer type/freq = APIC/8332989(Hz); default timing: oneshot; linear timed lists. [ 473.971725] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 1866787000 hz. [ 473.971731] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns. [ 473.990988] RTAI[math]: loaded. [ 474.184749] hm2: loading Mesa HostMot2 driver version 0.15 [ 474.188730] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 474.188796] hm2_pci: discovered 5i25 at 0000:02:00.0 [ 474.191391] hm2/hm2_5i25.0: Smart Serial Firmware Version 43 [ 474.248354] Board hm2_5i25.0.7i76.0.0 Hardware Mode 0 = standard [ 474.250328] Board hm2_5i25.0.7i76.0.0 Software Mode 0 = io_spin [ 474.253080] Board hm2_5i25.0.7i76.0.0 Software Mode 1 = io_ana_spin [ 474.256655] Board hm2_5i25.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv [ 474.408324] hm2/hm2_5i25.0: 34 I/O Pins used: [ 474.408334] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 474.408342] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 474.408349] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 474.408356] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 474.408363] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 474.408370] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 474.408377] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 474.408384] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 474.408391] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 474.408398] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 474.408405] hm2/hm2_5i25.0: IO Pin 010 (P3-07): Smart Serial Interface #0, pin TxData0 (Output) [ 474.408413] hm2/hm2_5i25.0: IO Pin 011 (P3-08): Smart Serial Interface #0, pin RxData0 (Input) [ 474.408420] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 474.408426] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 474.408432] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Muxed Encoder #0, pin Muxed Index (Input) [ 474.408440] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Muxed Encoder #0, pin Muxed B (Input) [ 474.408447] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Muxed Encoder #0, pin Muxed A (Input) [ 474.408453] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 474.408459] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 474.408465] hm2/hm2_5i25.0: IO Pin 019 (P2-02): StepGen #8, pin Step (Output) [ 474.408472] hm2/hm2_5i25.0: IO Pin 020 (P2-15): StepGen #8, pin Direction (Output) [ 474.408480] hm2/hm2_5i25.0: IO Pin 021 (P2-03): StepGen #7, pin Step (Output) [ 474.408487] hm2/hm2_5i25.0: IO Pin 022 (P2-16): StepGen #7, pin Direction (Output) [ 474.408494] hm2/hm2_5i25.0: IO Pin 023 (P2-04): StepGen #6, pin Step (Output) [ 474.408501] hm2/hm2_5i25.0: IO Pin 024 (P2-17): StepGen #6, pin Direction (Output) [ 474.408508] hm2/hm2_5i25.0: IO Pin 025 (P2-05): StepGen #5, pin Step (Output) [ 474.408515] hm2/hm2_5i25.0: IO Pin 026 (P2-06): StepGen #5, pin Direction (Output) [ 474.408522] hm2/hm2_5i25.0: IO Pin 027 (P2-07): Muxed Encoder Select #2, pin Mux Select 0 (Output) [ 474.408530] hm2/hm2_5i25.0: IO Pin 028 (P2-08): Muxed Encoder #1, pin Muxed A (Input) [ 474.408537] hm2/hm2_5i25.0: IO Pin 029 (P2-09): Muxed Encoder #1, pin Muxed B (Input) [ 474.408544] hm2/hm2_5i25.0: IO Pin 030 (P2-10): Muxed Encoder #1, pin Muxed Index (Input) [ 474.408551] hm2/hm2_5i25.0: IO Pin 031 (P2-11): Muxed Encoder #2, pin Muxed A (Input) [ 474.408559] hm2/hm2_5i25.0: IO Pin 032 (P2-12): Muxed Encoder #2, pin Muxed B (Input) [ 474.408566] hm2/hm2_5i25.0: IO Pin 033 (P2-13): Muxed Encoder #2, pin Muxed Index (Input) [ 474.408748] hm2/hm2_5i25.0: registered [ 474.408753] hm2_5i25.0: initialized AnyIO board at 0000:02:00.0 [ 481.253575] [ 481.253585] In recent history there were [ 481.253589] 2144373, 1861888, 1762425, 1698970, and 1861545 [ 481.253592] elapsed clocks between calls to the motion controller. [ 481.253612] This time, there were 2142224 which is so anomalously [ 481.253615] large that it probably signifies a problem with your [ 481.253619] realtime configuration. For the rest of this run of [ 481.253622] EMC, this message will be suppressed. [ 481.253626] [ 481.971020] hm2_5i25.0: dropping AnyIO board at 0000:02:00.0 [ 481.971031] hm2/hm2_5i25.0: unregistered [ 481.971133] hm2_pci: driver unloaded [ 481.975054] hm2: unloading [ 484.186553] RTAI[math]: unloaded. [ 484.191287] SCHED releases registered named ALIEN PEDV$D [ 484.204965] RTAI[malloc]: unloaded. [ 484.303774] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 484.308066] I-pipe: head domain RTAI unregistered. [ 484.308222] RTAI[hal]: unmounted. [ 667.862132] I-pipe: head domain RTAI registered. [ 667.862149] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 667.862294] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 667.862306] SYSINFO: CPUs 4, LINUX APIC IRQ 2312, TIM_FREQ 8332989, CLK_FREQ 1866787000, CPU_FREQ 1866787000 [ 667.862316] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 667.862327] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 8332989, 8332989, 8282250 [ 667.877431] RTAI[malloc]: global heap size = 2097152 bytes, . [ 667.877531] , , kstacks pool size = 524288 bytes. [ 667.877542] RTAI[sched]: hard timer type/freq = APIC/8332989(Hz); default timing: oneshot; linear timed lists. [ 667.877550] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 1866787000 hz. [ 667.877556] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns. [ 667.896043] RTAI[math]: loaded. [ 667.992231] hm2: loading Mesa HostMot2 driver version 0.15 [ 667.996338] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 667.996395] hm2_pci: discovered 5i25 at 0000:02:00.0 [ 667.998654] hm2/hm2_5i25.0: Smart Serial Firmware Version 43 [ 668.055710] Board hm2_5i25.0.7i76.0.0 Hardware Mode 0 = standard [ 668.057837] Board hm2_5i25.0.7i76.0.0 Software Mode 0 = io_spin [ 668.060635] Board hm2_5i25.0.7i76.0.0 Software Mode 1 = io_ana_spin [ 668.064263] Board hm2_5i25.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv [ 668.216205] hm2/hm2_5i25.0: 34 I/O Pins used: [ 668.216215] hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) [ 668.216222] hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) [ 668.216229] hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) [ 668.216236] hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) [ 668.216243] hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) [ 668.216250] hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) [ 668.216257] hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) [ 668.216264] hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) [ 668.216271] hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) [ 668.216278] hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) [ 668.216286] hm2/hm2_5i25.0: IO Pin 010 (P3-07): Smart Serial Interface #0, pin TxData0 (Output) [ 668.216294] hm2/hm2_5i25.0: IO Pin 011 (P3-08): Smart Serial Interface #0, pin RxData0 (Input) [ 668.216300] hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort [ 668.216306] hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort [ 668.216313] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Muxed Encoder #0, pin Muxed Index (Input) [ 668.216320] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Muxed Encoder #0, pin Muxed B (Input) [ 668.216328] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Muxed Encoder #0, pin Muxed A (Input) [ 668.216334] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 668.216340] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 668.216346] hm2/hm2_5i25.0: IO Pin 019 (P2-02): StepGen #8, pin Step (Output) [ 668.216353] hm2/hm2_5i25.0: IO Pin 020 (P2-15): StepGen #8, pin Direction (Output) [ 668.216360] hm2/hm2_5i25.0: IO Pin 021 (P2-03): StepGen #7, pin Step (Output) [ 668.216367] hm2/hm2_5i25.0: IO Pin 022 (P2-16): StepGen #7, pin Direction (Output) [ 668.216375] hm2/hm2_5i25.0: IO Pin 023 (P2-04): StepGen #6, pin Step (Output) [ 668.216382] hm2/hm2_5i25.0: IO Pin 024 (P2-17): StepGen #6, pin Direction (Output) [ 668.216389] hm2/hm2_5i25.0: IO Pin 025 (P2-05): StepGen #5, pin Step (Output) [ 668.216396] hm2/hm2_5i25.0: IO Pin 026 (P2-06): StepGen #5, pin Direction (Output) [ 668.216403] hm2/hm2_5i25.0: IO Pin 027 (P2-07): Muxed Encoder Select #2, pin Mux Select 0 (Output) [ 668.216410] hm2/hm2_5i25.0: IO Pin 028 (P2-08): Muxed Encoder #1, pin Muxed A (Input) [ 668.216418] hm2/hm2_5i25.0: IO Pin 029 (P2-09): Muxed Encoder #1, pin Muxed B (Input) [ 668.216425] hm2/hm2_5i25.0: IO Pin 030 (P2-10): Muxed Encoder #1, pin Muxed Index (Input) [ 668.216432] hm2/hm2_5i25.0: IO Pin 031 (P2-11): Muxed Encoder #2, pin Muxed A (Input) [ 668.216440] hm2/hm2_5i25.0: IO Pin 032 (P2-12): Muxed Encoder #2, pin Muxed B (Input) [ 668.216447] hm2/hm2_5i25.0: IO Pin 033 (P2-13): Muxed Encoder #2, pin Muxed Index (Input) [ 668.216632] hm2/hm2_5i25.0: registered [ 668.216637] hm2_5i25.0: initialized AnyIO board at 0000:02:00.0 [ 752.804917] [ 752.804925] In recent history there were [ 752.804927] 2034263, 1835715, 1686020, 1860677, and 1869259 [ 752.804930] elapsed clocks between calls to the motion controller. [ 752.804939] This time, there were 2039296 which is so anomalously [ 752.804942] large that it probably signifies a problem with your [ 752.804945] realtime configuration. For the rest of this run of [ 752.804948] EMC, this message will be suppressed. [ 752.804951] [ 840.069867] hm2_5i25.0: dropping AnyIO board at 0000:02:00.0 [ 840.069882] hm2/hm2_5i25.0: unregistered [ 840.069999] hm2_pci: driver unloaded [ 840.073993] hm2: unloading [ 842.288119] RTAI[math]: unloaded. [ 842.292462] SCHED releases registered named ALIEN PEDV$D [ 842.300930] RTAI[malloc]: unloaded. [ 842.398890] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 842.403006] I-pipe: head domain RTAI unregistered. [ 842.403211] RTAI[hal]: unmounted.