[ 0.000000] pcpu-alloc: s74936 r0 d23368 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243441 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=82fe59ba-f1fc-42bf-b540-3eb03891c491 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 4909120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003bee0) [ 0.000000] Memory: 946856k/981888k available (4539k kernel code, 34112k reserved, 1928k data, 620k init, 72584k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB) [ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB) [ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] I-pipe 2.6-03: pipeline enabled. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1000.021 MHz processor. [ 0.008010] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.04 BogoMIPS (lpj=4000084) [ 0.008071] Security Framework initialized [ 0.008145] AppArmor: AppArmor initialized [ 0.008168] Mount-cache hash table entries: 512 [ 0.008501] Initializing cgroup subsys ns [ 0.008513] Initializing cgroup subsys cpuacct [ 0.008529] Initializing cgroup subsys memory [ 0.008554] Initializing cgroup subsys devices [ 0.008563] Initializing cgroup subsys freezer [ 0.008572] Initializing cgroup subsys net_cls [ 0.008620] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.008631] CPU: L2 Cache: 128K (64 bytes/line) [ 0.008656] Performance Events: [ 0.008669] Checking 'hlt' instruction... OK. [ 0.025632] SMP alternatives: switching to UP code [ 0.054937] Freeing SMP alternatives: 31k freed [ 0.055006] ACPI: Core revision 20090903 [ 0.079150] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.079168] ftrace: allocating 21003 entries in 42 pages [ 0.096124] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.096548] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.100001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.100001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.100001] ..... (found apic 0 pin 2) ... [ 0.139987] ....... works. [ 0.139993] CPU0: Centaur VIA Esther processor 1000MHz stepping 09 [ 0.144001] Brought up 1 CPUs [ 0.144001] Total of 1 processors activated (2000.04 BogoMIPS). [ 0.144001] CPU0 attaching NULL sched-domain. [ 0.144001] devtmpfs: initialized [ 0.144001] regulator: core version 0.5 [ 0.144001] NET: Registered protocol family 16 [ 0.144001] EISA bus registered [ 0.144001] ACPI: bus type pci registered [ 0.144282] PCI: PCI BIOS revision 2.10 entry at 0xfa200, last bus=1 [ 0.144291] PCI: Using configuration type 1 for base access [ 0.146820] bio: create slab at 0 [ 0.149072] ACPI: EC: Look up EC in DSDT [ 0.163352] ACPI Warning: Package List length (0x8) larger than NumElements count (0x2), truncated [ 0.163372] (20090903/dsobject-515) [ 0.163695] ACPI Warning: Package List length (0x8) larger than NumElements count (0x2), truncated [ 0.163711] (20090903/dsobject-515) [ 0.174907] ACPI: Interpreter enabled [ 0.174915] ACPI: (supports S0 S5) [ 0.174954] ACPI: Using IOAPIC for interrupt routing [ 0.198220] ACPI: No dock devices found. [ 0.198663] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.198786] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.199273] pci 0000:00:01.0: supports D1 [ 0.199345] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfdfff000-0xfdfff7ff] [ 0.199363] pci 0000:00:0a.0: reg 14 io port: [0xff00-0xff7f] [ 0.199428] pci 0000:00:0a.0: supports D2 [ 0.199437] pci 0000:00:0a.0: PME# supported from D2 D3hot D3cold [ 0.199450] pci 0000:00:0a.0: PME# disabled [ 0.199515] pci 0000:00:0f.0: reg 10 io port: [0xfe00-0xfe07] [ 0.199532] pci 0000:00:0f.0: reg 14 io port: [0xfd00-0xfd03] [ 0.199549] pci 0000:00:0f.0: reg 18 io port: [0xfc00-0xfc07] [ 0.199566] pci 0000:00:0f.0: reg 1c io port: [0xfb00-0xfb03] [ 0.199583] pci 0000:00:0f.0: reg 20 io port: [0xfa00-0xfa0f] [ 0.199600] pci 0000:00:0f.0: reg 24 io port: [0xf200-0xf2ff] [ 0.199716] pci 0000:00:0f.1: reg 20 io port: [0xf900-0xf90f] [ 0.199847] pci 0000:00:10.0: reg 20 io port: [0xf800-0xf81f] [ 0.199892] pci 0000:00:10.0: supports D1 D2 [ 0.199901] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.199913] pci 0000:00:10.0: PME# disabled [ 0.200017] pci 0000:00:10.1: reg 20 io port: [0xf700-0xf71f] [ 0.200061] pci 0000:00:10.1: supports D1 D2 [ 0.200070] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.200083] pci 0000:00:10.1: PME# disabled [ 0.200163] pci 0000:00:10.2: reg 20 io port: [0xf600-0xf61f] [ 0.200208] pci 0000:00:10.2: supports D1 D2 [ 0.200217] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.200229] pci 0000:00:10.2: PME# disabled [ 0.200309] pci 0000:00:10.3: reg 20 io port: [0xf500-0xf51f] [ 0.200354] pci 0000:00:10.3: supports D1 D2 [ 0.200363] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.200375] pci 0000:00:10.3: PME# disabled [ 0.200431] pci 0000:00:10.4: reg 10 32bit mmio: [0xfdffe000-0xfdffe0ff] [ 0.200501] pci 0000:00:10.4: supports D1 D2 [ 0.200510] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.200522] pci 0000:00:10.4: PME# disabled [ 0.200704] pci 0000:00:11.5: reg 10 io port: [0xf000-0xf0ff] [ 0.200775] pci 0000:00:11.5: supports D1 D2 [ 0.200836] pci 0000:00:12.0: reg 10 io port: [0xee00-0xeeff] [ 0.200853] pci 0000:00:12.0: reg 14 32bit mmio: [0xfdffd000-0xfdffd0ff] [ 0.200918] pci 0000:00:12.0: supports D1 D2 [ 0.200927] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.200939] pci 0000:00:12.0: PME# disabled [ 0.201034] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf4000000-0xf7ffffff] [ 0.201051] pci 0000:01:00.0: reg 14 32bit mmio: [0xfb000000-0xfbffffff] [ 0.201088] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.201122] pci 0000:01:00.0: supports D1 D2 [ 0.201188] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.201201] pci 0000:00:01.0: bridge 32bit mmio: [0xfb000000-0xfcffffff] [ 0.201215] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf4000000-0xf7ffffff] [ 0.201235] pci_bus 0000:00: on NUMA node 0 [ 0.201253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.406585] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 0.407117] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 0.407654] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5 [ 0.408211] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12) [ 0.408659] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.409091] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.409521] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.409951] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.410525] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [ 0.411058] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [ 0.411590] ACPI: PCI Interrupt Link [ALKC] (IRQs *22) [ 0.412251] ACPI: PCI Interrupt Link [ALKD] (IRQs *23) [ 0.412604] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.412615] vgaarb: loaded [ 0.412982] SCSI subsystem initialized [ 0.413175] libata version 3.00 loaded. [ 0.413413] usbcore: registered new interface driver usbfs [ 0.413454] usbcore: registered new interface driver hub [ 0.413527] usbcore: registered new device driver usb [ 0.413943] ACPI: WMI: Mapper loaded [ 0.413951] PCI: Using ACPI for IRQ routing [ 0.414375] NetLabel: Initializing [ 0.414382] NetLabel: domain hash size = 128 [ 0.414389] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.414431] NetLabel: unlabeled traffic allowed by default [ 0.414538] Switching to clocksource tsc [ 0.417139] AppArmor: AppArmor Filesystem Enabled [ 0.417182] pnp: PnP ACPI init [ 0.417228] ACPI: bus type pnp registered [ 0.432006] pnp: PnP ACPI: found 14 devices [ 0.432016] ACPI: ACPI bus type pnp unregistered [ 0.432028] PnPBIOS: Disabled by ACPI PNP [ 0.432064] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.432077] system 00:00: iomem range 0x3bee0000-0x3befffff could not be reserved [ 0.432092] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.432105] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.432118] system 00:00: iomem range 0x100000-0x3bedffff could not be reserved [ 0.432131] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.432145] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.432159] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.432182] system 00:02: ioport range 0x400-0x47f has been reserved [ 0.432195] system 00:02: ioport range 0x500-0x50f has been reserved [ 0.432216] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.432229] system 00:03: ioport range 0x800-0x805 has been reserved [ 0.432241] system 00:03: ioport range 0x290-0x297 has been reserved [ 0.467378] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.467390] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.467405] pci 0000:00:01.0: MEM window: 0xfb000000-0xfcffffff [ 0.467419] pci 0000:00:01.0: PREFETCH window: 0xf4000000-0xf7ffffff [ 0.467451] pci 0000:00:01.0: setting latency timer to 64 [ 0.467468] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.467478] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.467490] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.467501] pci_bus 0000:01: resource 1 mem: [0xfb000000-0xfcffffff] [ 0.467513] pci_bus 0000:01: resource 2 pref mem [0xf4000000-0xf7ffffff] [ 0.467629] NET: Registered protocol family 2 [ 0.467938] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.469051] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.471495] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.472743] TCP: Hash tables configured (established 131072 bind 65536) [ 0.472754] TCP reno registered [ 0.473046] NET: Registered protocol family 1 [ 0.473119] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.473261] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message [ 0.473289] pci 0000:01:00.0: Boot video device [ 0.473628] Scanning for low memory corruption every 60 seconds [ 0.473900] audit: initializing netlink socket (disabled) [ 0.473939] type=2000 audit(1596385252.473:1): initialized [ 0.501788] Trying to unpack rootfs image as initramfs... [ 0.533857] highmem bounce pool size: 64 pages [ 0.533876] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.541942] VFS: Disk quotas dquot_6.5.2 [ 0.542228] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.549776] fuse init (API version 7.13) [ 0.550171] msgmni has been set to 1708 [ 0.550874] alg: No test for stdrng (krng) [ 0.551117] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.551128] io scheduler noop registered [ 0.551135] io scheduler anticipatory registered [ 0.551143] io scheduler deadline registered [ 0.551290] io scheduler cfq registered (default) [ 0.551649] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.551722] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.551965] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.551980] ACPI: Power Button [PWRB] [ 0.552190] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.552201] ACPI: Power Button [PWRF] [ 0.556109] isapnp: Scanning for PnP cards... [ 0.566531] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.566702] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.566863] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.567549] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.567802] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.575862] brd: module loaded [ 0.621237] loop: module loaded [ 0.621614] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.622795] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 0.622813] alloc irq_desc for 20 on node -1 [ 0.622821] alloc kstat_irqs on node -1 [ 0.622843] pata_acpi 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 0.622977] pata_acpi 0000:00:0f.0: PCI INT B disabled [ 0.623030] pata_acpi 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 0.623094] pata_acpi 0000:00:0f.1: PCI INT A disabled [ 0.624102] Fixed MDIO Bus: probed [ 0.624221] PPP generic driver version 2.4.2 [ 0.624391] tun: Universal TUN/TAP device driver, 1.6 [ 0.624399] tun: (C) 1999-2004 Max Krasnyansky [ 0.624673] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.630623] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 0.630643] alloc irq_desc for 21 on node -1 [ 0.630652] alloc kstat_irqs on node -1 [ 0.630677] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.630724] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.630925] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 0.631044] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdffe000 [ 0.642743] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.643122] usb usb1: configuration #1 chosen from 1 choice [ 0.643223] hub 1-0:1.0: USB hub found [ 0.643254] hub 1-0:1.0: 8 ports detected [ 0.643428] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.643486] uhci_hcd: USB Universal Host Controller Interface driver [ 0.643658] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.643685] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.643810] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.643859] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000f800 [ 0.644167] usb usb2: configuration #1 chosen from 1 choice [ 0.644252] hub 2-0:1.0: USB hub found [ 0.644276] hub 2-0:1.0: 2 ports detected [ 0.644413] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.644432] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.644541] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.644581] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000f700 [ 0.644873] usb usb3: configuration #1 chosen from 1 choice [ 0.644956] hub 3-0:1.0: USB hub found [ 0.644979] hub 3-0:1.0: 2 ports detected [ 0.645110] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.645128] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.645224] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.645262] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f600 [ 0.645629] usb usb4: configuration #1 chosen from 1 choice [ 0.645715] hub 4-0:1.0: USB hub found [ 0.645740] hub 4-0:1.0: 2 ports detected [ 0.645876] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.645895] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.645993] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 0.646033] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000f500 [ 0.646341] usb usb5: configuration #1 chosen from 1 choice [ 0.646426] hub 5-0:1.0: USB hub found [ 0.646449] hub 5-0:1.0: 2 ports detected [ 0.646727] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.650241] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.650273] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.650765] mice: PS/2 mouse device common for all mice [ 0.651099] rtc_cmos 00:05: RTC can wake from S4 [ 0.651231] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.651285] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.651696] device-mapper: uevent: version 1.0.3 [ 0.656478] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.656698] device-mapper: multipath: version 1.1.0 loaded [ 0.656708] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.657109] EISA: Probing bus 0 at eisa.0 [ 0.657179] EISA: Detected 0 cards. [ 0.657187] cpuidle: using governor ladder [ 0.657195] cpuidle: using governor menu [ 0.658782] TCP cubic registered [ 0.659329] NET: Registered protocol family 10 [ 0.660799] lo: Disabled Privacy Extensions [ 0.664981] NET: Registered protocol family 17 [ 0.665121] Using IPI No-Shortcut mode [ 0.665471] registered taskstats version 1 [ 0.666203] rtc_cmos 00:05: setting system clock to 2020-08-02 16:20:53 UTC (1596385253) [ 0.666215] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.666223] EDD information not available. [ 0.680814] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.248107] isapnp: No Plug & Play device found [ 2.143562] Freeing initrd memory: 12824k freed [ 2.166526] Freeing unused kernel memory: 620k freed [ 2.167920] Write protecting the kernel text: 4540k [ 2.168112] Write protecting the kernel read-only data: 1668k [ 2.261185] udev: starting version 151 [ 3.088002] Linux agpgart interface v0.103 [ 3.137143] agpgart: Detected VIA VT3314 chipset [ 3.159100] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 3.159170] sata_via 0000:00:0f.0: version 2.4 [ 3.159209] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 3.159312] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 3.169876] scsi0 : sata_via [ 3.170534] scsi1 : sata_via [ 3.196299] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 20 [ 3.196314] ata2: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 20 [ 3.196625] pata_via 0000:00:0f.1: version 0.3.4 [ 3.196664] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 3.197802] scsi2 : pata_via [ 3.199049] scsi3 : pata_via [ 3.203912] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 [ 3.203926] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 [ 3.211073] alloc irq_desc for 19 on node -1 [ 3.211085] alloc kstat_irqs on node -1 [ 3.211108] ohci1394 0000:00:0a.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.214884] FDC 0 is a post-1991 82077 [ 3.228744] vga16fb: initializing [ 3.228762] vga16fb: mapped to 0xc00a0000 [ 3.229233] fb0: VGA16 VGA frame buffer device [ 3.240879] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 3.240897] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 3.270090] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 3.276042] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 [ 3.276060] alloc irq_desc for 23 on node -1 [ 3.276069] alloc kstat_irqs on node -1 [ 3.276090] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23 [ 3.278547] eth0: VIA Rhine II at 0xfdffd000, 00:30:18:ae:97:a8, IRQ 23. [ 3.279269] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 3.400035] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.613014] ata1.00: ATA-7: WDC WD1600BEVS-75RST0, 04.01G04, max UDMA/133 [ 3.613028] ata1.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 3.628741] ata1.00: configured for UDMA/133 [ 3.629040] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-7 04.0 PQ: 0 ANSI: 5 [ 3.629540] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.630478] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 3.630601] sd 0:0:0:0: [sda] Write Protect is off [ 3.630613] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.630675] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.631102] sda: sda1 sda2 < sda5 > [ 3.665917] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.832034] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 4.191716] Console: switching to colour frame buffer device 80x30 [ 4.544419] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0030180000a0fc4c] [ 5.276178] xor: automatically using best checksumming function: pIII_sse [ 5.296015] pIII_sse : 2224.000 MB/sec [ 5.296024] xor: using function: pIII_sse (2224.000 MB/sec) [ 5.344270] device-mapper: dm-raid45: initialized v0.2594b [ 5.556680] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 5.556699] EXT4-fs (sda1): write access will be enabled during recovery [ 6.624740] EXT4-fs (sda1): orphan cleanup on readonly fs [ 6.624785] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 786876 [ 6.624997] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 786962 [ 6.625136] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 786905 [ 6.625184] EXT4-fs (sda1): 3 orphan inodes deleted [ 6.625196] EXT4-fs (sda1): recovery complete [ 6.957175] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 16.278862] Adding 2811896k swap on /dev/sda5. Priority:-1 extents:1 across:2811896k [ 16.475864] udev: starting version 151 [ 16.919668] lp: driver loaded but no devices found [ 17.177070] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.462346] parport_pc 00:0b: reported by Plug and Play ACPI [ 17.462403] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 17.557459] udev: renamed network interface eth0 to eth1 [ 17.652694] lp0: using parport0 (interrupt-driven). [ 18.114023] psmouse serio1: ID: 10 00 64 [ 18.376138] ppdev: user-space parallel port driver [ 18.664825] type=1505 audit(1596385271.497:2): operation="profile_load" pid=604 name="/sbin/dhclient3" [ 18.665722] type=1505 audit(1596385271.497:3): operation="profile_load" pid=604 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 18.666251] type=1505 audit(1596385271.497:4): operation="profile_load" pid=604 name="/usr/lib/connman/scripts/dhclient-script" [ 18.719369] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 19.739246] type=1505 audit(1596385272.569:5): operation="profile_load" pid=717 name="/usr/share/gdm/guest-session/Xsession" [ 19.745057] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 19.745076] alloc irq_desc for 22 on node -1 [ 19.745085] alloc kstat_irqs on node -1 [ 19.745109] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 19.745299] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 19.776075] type=1505 audit(1596385272.605:6): operation="profile_replace" pid=718 name="/sbin/dhclient3" [ 19.798318] type=1505 audit(1596385272.629:7): operation="profile_replace" pid=718 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 19.798884] type=1505 audit(1596385272.629:8): operation="profile_replace" pid=718 name="/usr/lib/connman/scripts/dhclient-script" [ 19.892353] eth1: link down [ 19.897642] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 19.922864] type=1505 audit(1596385272.753:9): operation="profile_load" pid=719 name="/usr/bin/evince" [ 19.967914] type=1505 audit(1596385272.797:10): operation="profile_load" pid=719 name="/usr/bin/evince-previewer" [ 19.984367] type=1505 audit(1596385272.817:11): operation="profile_load" pid=719 name="/usr/bin/evince-thumbnailer" [ 22.279008] [drm] Initialized drm 1.1.0 20060810 [ 22.294111] alloc irq_desc for 16 on node -1 [ 22.294123] alloc kstat_irqs on node -1 [ 22.294146] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 22.297152] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0 [ 22.302586] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 22.302639] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 22.302769] pci 0000:01:00.0: putting AGP V3 device into 8x mode [ 23.296962] irq 16: nobody cared (try booting with the "irqpoll" option) [ 23.296983] Pid: 930, comm: Xorg Not tainted 2.6.32-122-rtai #rtai [ 23.296992] Call Trace: [ 23.297021] [] __report_bad_irq+0x2c/0x90 [ 23.297037] [] note_interrupt+0x150/0x190 [ 23.297060] [] ? unmask_IO_APIC_irq_desc+0x6e/0xa0 [ 23.297077] [] handle_fasteoi_irq+0xa3/0xc0 [ 23.297095] [] handle_irq+0x1d/0x30 [ 23.297114] [] do_IRQ+0x54/0xe0 [ 23.297128] [] ? __xirq_end+0x0/0x57 [ 23.297141] [] ? common_interrupt+0x31/0x40 [ 23.297154] [] ? do_IRQ+0x0/0xe0 [ 23.297167] [] __ipipe_sync_stage+0x1f7/0x1fc [ 23.297181] [] ? do_IRQ+0x0/0xe0 [ 23.297193] [] ? __xirq_end+0x0/0x57 [ 23.297207] [] __ipipe_walk_pipeline+0xde/0xf0 [ 23.297221] [] ? io_apic_sync+0x0/0x30 [ 23.297238] [] __ipipe_handle_irq+0xef/0x240 [ 23.297252] [] ? __ipipe_ack_fasteoi_irq+0x0/0x10 [ 23.297266] [] common_interrupt+0x31/0x40 [ 23.297274] handlers: [ 23.297280] [] (via_driver_irq_handler+0x0/0x1c0 [via]) [ 23.297306] Disabling IRQ #16 [ 43.176032] usb 1-8: new high speed USB device using ehci_hcd and address 2 [ 43.310598] usb 1-8: configuration #1 chosen from 1 choice [ 43.414337] Initializing USB Mass Storage driver... [ 43.414708] scsi4 : SCSI emulation for USB Mass Storage devices [ 43.415276] usbcore: registered new interface driver usb-storage [ 43.415289] USB Mass Storage support registered. [ 43.429402] usb-storage: device found at 2 [ 43.429413] usb-storage: waiting for device to settle before scanning [ 48.428235] usb-storage: device scan complete [ 48.428807] scsi 4:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 8.02 PQ: 0 ANSI: 0 CCS [ 48.437209] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 48.441280] sd 4:0:0:0: [sdb] 15704063 512-byte logical blocks: (8.04 GB/7.48 GiB) [ 48.441886] sd 4:0:0:0: [sdb] Write Protect is off [ 48.441898] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08 [ 48.441908] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 48.444557] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 48.444580] sdb: sdb1 [ 48.451281] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 48.451302] sd 4:0:0:0: [sdb] Attached SCSI removable disk david@SmithyCNC1240:~$