[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bee0000 (usable) [ 0.000000] BIOS-e820: 000000003bee0000 - 000000003bee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bee3000 - 000000003bef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000003bef0000 - 000000003bf00000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3bee0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-F7FFF write-through [ 0.000000] F8000-F8FFF uncachable [ 0.000000] F9000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03C000000 mask FFC000000 uncachable [ 0.000000] 2 base 0E8000000 mask FF8000000 write-combining [ 0.000000] 3 base 03BF00000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003bee0000 (usable) [ 0.000000] modified: 000000003bee0000 - 000000003bee3000 (ACPI NVS) [ 0.000000] modified: 000000003bee3000 - 000000003bef0000 (ACPI data) [ 0.000000] modified: 000000003bef0000 - 000000003bf00000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 2c2e1000 - 2cf67088 [ 0.000000] ACPI: RSDP 000f7c60 00014 (v00 CN700 ) [ 0.000000] ACPI: RSDT 3bee3000 0002C (v01 CN700 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3bee3080 00074 (v01 CN700 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3bee3100 0617E (v01 CN700 AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 3bee0000 00040 [ 0.000000] ACPI: APIC 3bee9280 0005A (v01 CN700 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 70MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000 - 00008b0db8] [ 0.000000] #4 [002c2e1000 - 002cf67088] RAMDISK ==> [002c2e1000 - 002cf67088] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008b1000 - 00008b406e] BRK ==> [00008b1000 - 00008b406e] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00f3a40] f3a40 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003bee0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003bee0 [ 0.000000] On node 0 totalpages: 245359 [ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 142 pages used for memmap [ 0.000000] HighMem zone: 18004 pages, LIFO batch:3 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at 3bf00000 (gap: 3bf00000:c2d00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @c1800000 s74936 r0 d23368 u4194304 [ 0.000000] pcpu-alloc: s74936 r0 d23368 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243441 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=82fe59ba-f1fc-42bf-b540-3eb03891c491 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 4909120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003bee0) [ 0.000000] Memory: 946856k/981888k available (4539k kernel code, 34112k reserved, 1928k data, 620k init, 72584k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB) [ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB) [ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] I-pipe 2.6-03: pipeline enabled. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 999.822 MHz processor. [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.64 BogoMIPS (lpj=3999288) [ 0.004070] Security Framework initialized [ 0.004143] AppArmor: AppArmor initialized [ 0.004167] Mount-cache hash table entries: 512 [ 0.004501] Initializing cgroup subsys ns [ 0.004513] Initializing cgroup subsys cpuacct [ 0.004528] Initializing cgroup subsys memory [ 0.004554] Initializing cgroup subsys devices [ 0.004563] Initializing cgroup subsys freezer [ 0.004572] Initializing cgroup subsys net_cls [ 0.004620] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004631] CPU: L2 Cache: 128K (64 bytes/line) [ 0.004656] Performance Events: [ 0.004669] Checking 'hlt' instruction... OK. [ 0.021631] SMP alternatives: switching to UP code [ 0.050929] Freeing SMP alternatives: 31k freed [ 0.050995] ACPI: Core revision 20090903 [ 0.075156] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.075175] ftrace: allocating 21003 entries in 42 pages [ 0.092144] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.092569] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.096001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.096001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.096001] ..... (found apic 0 pin 2) ... [ 0.136006] ....... works. [ 0.136012] CPU0: Centaur VIA Esther processor 1000MHz stepping 09 [ 0.140001] Brought up 1 CPUs [ 0.140001] Total of 1 processors activated (1999.64 BogoMIPS). [ 0.140001] CPU0 attaching NULL sched-domain. [ 0.140001] devtmpfs: initialized [ 0.140001] regulator: core version 0.5 [ 0.140001] NET: Registered protocol family 16 [ 0.140001] EISA bus registered [ 0.140001] ACPI: bus type pci registered [ 0.140289] PCI: PCI BIOS revision 2.10 entry at 0xfa200, last bus=1 [ 0.140298] PCI: Using configuration type 1 for base access [ 0.142827] bio: create slab at 0 [ 0.145081] ACPI: EC: Look up EC in DSDT [ 0.159394] ACPI Warning: Package List length (0x8) larger than NumElements count (0x2), truncated [ 0.159414] (20090903/dsobject-515) [ 0.159739] ACPI Warning: Package List length (0x8) larger than NumElements count (0x2), truncated [ 0.159756] (20090903/dsobject-515) [ 0.170946] ACPI: Interpreter enabled [ 0.170955] ACPI: (supports S0 S5) [ 0.170994] ACPI: Using IOAPIC for interrupt routing [ 0.194259] ACPI: No dock devices found. [ 0.194702] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.194823] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.195310] pci 0000:00:01.0: supports D1 [ 0.195381] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfdfff000-0xfdfff7ff] [ 0.195399] pci 0000:00:0a.0: reg 14 io port: [0xff00-0xff7f] [ 0.195464] pci 0000:00:0a.0: supports D2 [ 0.195474] pci 0000:00:0a.0: PME# supported from D2 D3hot D3cold [ 0.195487] pci 0000:00:0a.0: PME# disabled [ 0.195551] pci 0000:00:0f.0: reg 10 io port: [0xfe00-0xfe07] [ 0.195568] pci 0000:00:0f.0: reg 14 io port: [0xfd00-0xfd03] [ 0.195586] pci 0000:00:0f.0: reg 18 io port: [0xfc00-0xfc07] [ 0.195603] pci 0000:00:0f.0: reg 1c io port: [0xfb00-0xfb03] [ 0.195620] pci 0000:00:0f.0: reg 20 io port: [0xfa00-0xfa0f] [ 0.195637] pci 0000:00:0f.0: reg 24 io port: [0xf200-0xf2ff] [ 0.195753] pci 0000:00:0f.1: reg 20 io port: [0xf900-0xf90f] [ 0.195885] pci 0000:00:10.0: reg 20 io port: [0xf800-0xf81f] [ 0.195929] pci 0000:00:10.0: supports D1 D2 [ 0.195938] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.195951] pci 0000:00:10.0: PME# disabled [ 0.196051] pci 0000:00:10.1: reg 20 io port: [0xf700-0xf71f] [ 0.196096] pci 0000:00:10.1: supports D1 D2 [ 0.196105] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196117] pci 0000:00:10.1: PME# disabled [ 0.196197] pci 0000:00:10.2: reg 20 io port: [0xf600-0xf61f] [ 0.196242] pci 0000:00:10.2: supports D1 D2 [ 0.196251] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196263] pci 0000:00:10.2: PME# disabled [ 0.196344] pci 0000:00:10.3: reg 20 io port: [0xf500-0xf51f] [ 0.196388] pci 0000:00:10.3: supports D1 D2 [ 0.196397] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196409] pci 0000:00:10.3: PME# disabled [ 0.196466] pci 0000:00:10.4: reg 10 32bit mmio: [0xfdffe000-0xfdffe0ff] [ 0.196536] pci 0000:00:10.4: supports D1 D2 [ 0.196545] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196557] pci 0000:00:10.4: PME# disabled [ 0.196738] pci 0000:00:11.5: reg 10 io port: [0xf000-0xf0ff] [ 0.196810] pci 0000:00:11.5: supports D1 D2 [ 0.196870] pci 0000:00:12.0: reg 10 io port: [0xee00-0xeeff] [ 0.196888] pci 0000:00:12.0: reg 14 32bit mmio: [0xfdffd000-0xfdffd0ff] [ 0.196952] pci 0000:00:12.0: supports D1 D2 [ 0.196961] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.196974] pci 0000:00:12.0: PME# disabled [ 0.197069] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf4000000-0xf7ffffff] [ 0.197086] pci 0000:01:00.0: reg 14 32bit mmio: [0xfb000000-0xfbffffff] [ 0.197123] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.197157] pci 0000:01:00.0: supports D1 D2 [ 0.197223] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.197236] pci 0000:00:01.0: bridge 32bit mmio: [0xfb000000-0xfcffffff] [ 0.197251] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf4000000-0xf7ffffff] [ 0.197270] pci_bus 0000:00: on NUMA node 0 [ 0.197288] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.402619] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 0.403151] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 0.403690] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5 [ 0.404242] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12) [ 0.404692] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.405123] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.405553] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.405983] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.406558] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [ 0.407092] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [ 0.407625] ACPI: PCI Interrupt Link [ALKC] (IRQs *22) [ 0.408284] ACPI: PCI Interrupt Link [ALKD] (IRQs *23) [ 0.408636] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.408646] vgaarb: loaded [ 0.409015] SCSI subsystem initialized [ 0.409208] libata version 3.00 loaded. [ 0.409445] usbcore: registered new interface driver usbfs [ 0.409486] usbcore: registered new interface driver hub [ 0.409560] usbcore: registered new device driver usb [ 0.409980] ACPI: WMI: Mapper loaded [ 0.409988] PCI: Using ACPI for IRQ routing [ 0.410411] NetLabel: Initializing [ 0.410418] NetLabel: domain hash size = 128 [ 0.410424] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.410467] NetLabel: unlabeled traffic allowed by default [ 0.410574] Switching to clocksource tsc [ 0.413152] AppArmor: AppArmor Filesystem Enabled [ 0.413195] pnp: PnP ACPI init [ 0.413242] ACPI: bus type pnp registered [ 0.428032] pnp: PnP ACPI: found 14 devices [ 0.428042] ACPI: ACPI bus type pnp unregistered [ 0.428054] PnPBIOS: Disabled by ACPI PNP [ 0.428089] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.428102] system 00:00: iomem range 0x3bee0000-0x3befffff could not be reserved [ 0.428117] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.428130] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.428143] system 00:00: iomem range 0x100000-0x3bedffff could not be reserved [ 0.428157] system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.428171] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.428184] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.428209] system 00:02: ioport range 0x400-0x47f has been reserved [ 0.428221] system 00:02: ioport range 0x500-0x50f has been reserved [ 0.428243] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.428255] system 00:03: ioport range 0x800-0x805 has been reserved [ 0.428268] system 00:03: ioport range 0x290-0x297 has been reserved [ 0.463411] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.463424] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.463439] pci 0000:00:01.0: MEM window: 0xfb000000-0xfcffffff [ 0.463452] pci 0000:00:01.0: PREFETCH window: 0xf4000000-0xf7ffffff [ 0.463485] pci 0000:00:01.0: setting latency timer to 64 [ 0.463501] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.463512] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.463524] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.463535] pci_bus 0000:01: resource 1 mem: [0xfb000000-0xfcffffff] [ 0.463547] pci_bus 0000:01: resource 2 pref mem [0xf4000000-0xf7ffffff] [ 0.463664] NET: Registered protocol family 2 [ 0.463973] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.465082] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.467527] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.468777] TCP: Hash tables configured (established 131072 bind 65536) [ 0.468788] TCP reno registered [ 0.469078] NET: Registered protocol family 1 [ 0.469153] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.469300] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message [ 0.469350] pci 0000:01:00.0: Boot video device [ 0.469654] Scanning for low memory corruption every 60 seconds [ 0.469927] audit: initializing netlink socket (disabled) [ 0.469966] type=2000 audit(1596307297.469:1): initialized [ 0.497815] Trying to unpack rootfs image as initramfs... [ 0.529890] highmem bounce pool size: 64 pages [ 0.529910] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.537976] VFS: Disk quotas dquot_6.5.2 [ 0.538265] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.545810] fuse init (API version 7.13) [ 0.546203] msgmni has been set to 1708 [ 0.546905] alg: No test for stdrng (krng) [ 0.547151] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.547162] io scheduler noop registered [ 0.547169] io scheduler anticipatory registered [ 0.547177] io scheduler deadline registered [ 0.547324] io scheduler cfq registered (default) [ 0.547685] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.547759] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.548001] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.548015] ACPI: Power Button [PWRB] [ 0.548226] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.548237] ACPI: Power Button [PWRF] [ 0.552148] isapnp: Scanning for PnP cards... [ 0.562565] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.562738] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.562899] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.563589] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.563842] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.571895] brd: module loaded [ 0.617278] loop: module loaded [ 0.617652] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.618831] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 0.618850] alloc irq_desc for 20 on node -1 [ 0.618858] alloc kstat_irqs on node -1 [ 0.618881] pata_acpi 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 0.619015] pata_acpi 0000:00:0f.0: PCI INT B disabled [ 0.619068] pata_acpi 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 0.619132] pata_acpi 0000:00:0f.1: PCI INT A disabled [ 0.620144] Fixed MDIO Bus: probed [ 0.620263] PPP generic driver version 2.4.2 [ 0.620434] tun: Universal TUN/TAP device driver, 1.6 [ 0.620442] tun: (C) 1999-2004 Max Krasnyansky [ 0.620715] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.626671] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 0.626691] alloc irq_desc for 21 on node -1 [ 0.626700] alloc kstat_irqs on node -1 [ 0.626725] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.626772] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.626976] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 0.627095] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdffe000 [ 0.638797] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.639174] usb usb1: configuration #1 chosen from 1 choice [ 0.639274] hub 1-0:1.0: USB hub found [ 0.639305] hub 1-0:1.0: 8 ports detected [ 0.639479] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.639537] uhci_hcd: USB Universal Host Controller Interface driver [ 0.639710] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.639737] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.639862] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.639912] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000f800 [ 0.640222] usb usb2: configuration #1 chosen from 1 choice [ 0.640310] hub 2-0:1.0: USB hub found [ 0.640334] hub 2-0:1.0: 2 ports detected [ 0.640472] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.640492] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.640603] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.640643] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000f700 [ 0.640936] usb usb3: configuration #1 chosen from 1 choice [ 0.641019] hub 3-0:1.0: USB hub found [ 0.641043] hub 3-0:1.0: 2 ports detected [ 0.641172] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.641190] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.641285] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.641324] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000f600 [ 0.641677] usb usb4: configuration #1 chosen from 1 choice [ 0.641764] hub 4-0:1.0: USB hub found [ 0.641788] hub 4-0:1.0: 2 ports detected [ 0.641924] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.641944] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.642042] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 0.642083] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000f500 [ 0.642392] usb usb5: configuration #1 chosen from 1 choice [ 0.642478] hub 5-0:1.0: USB hub found [ 0.642501] hub 5-0:1.0: 2 ports detected [ 0.642781] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.646330] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.646363] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.646851] mice: PS/2 mouse device common for all mice [ 0.647187] rtc_cmos 00:05: RTC can wake from S4 [ 0.647317] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.647369] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.647781] device-mapper: uevent: version 1.0.3 [ 0.648169] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.651640] device-mapper: multipath: version 1.1.0 loaded [ 0.651655] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.652199] EISA: Probing bus 0 at eisa.0 [ 0.652270] EISA: Detected 0 cards. [ 0.652279] cpuidle: using governor ladder [ 0.652287] cpuidle: using governor menu [ 0.653912] TCP cubic registered [ 0.654463] NET: Registered protocol family 10 [ 0.655934] lo: Disabled Privacy Extensions [ 0.657035] NET: Registered protocol family 17 [ 0.661229] Using IPI No-Shortcut mode [ 0.661583] registered taskstats version 1 [ 0.662316] rtc_cmos 00:05: setting system clock to 2020-08-01 18:41:38 UTC (1596307298) [ 0.662328] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.662336] EDD information not available. [ 0.674111] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.244324] isapnp: No Plug & Play device found [ 2.139892] Freeing initrd memory: 12824k freed [ 2.162788] Freeing unused kernel memory: 620k freed [ 2.164257] Write protecting the kernel text: 4540k [ 2.164366] Write protecting the kernel read-only data: 1668k [ 2.257151] udev: starting version 151 [ 3.049603] Linux agpgart interface v0.103 [ 3.067045] agpgart: Detected VIA VT3314 chipset [ 3.128660] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 3.152245] FDC 0 is a post-1991 82077 [ 3.152397] sata_via 0000:00:0f.0: version 2.4 [ 3.152441] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 3.152543] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 3.152747] scsi0 : sata_via [ 3.153913] scsi1 : sata_via [ 3.159806] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 20 [ 3.159821] ata2: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 20 [ 3.182226] pata_via 0000:00:0f.1: version 0.3.4 [ 3.182274] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 3.182666] scsi2 : pata_via [ 3.183184] scsi3 : pata_via [ 3.188000] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 [ 3.188027] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 [ 3.190106] alloc irq_desc for 19 on node -1 [ 3.190118] alloc kstat_irqs on node -1 [ 3.190141] ohci1394 0000:00:0a.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.246088] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 3.360037] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.580260] ata1.00: ATA-7: WDC WD1600BEVS-75RST0, 04.01G04, max UDMA/133 [ 3.580274] ata1.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 3.597336] ata1.00: configured for UDMA/133 [ 3.597633] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-7 04.0 PQ: 0 ANSI: 5 [ 3.598140] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.599046] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 3.599176] sd 0:0:0:0: [sda] Write Protect is off [ 3.599187] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.599250] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.599671] sda: sda1 sda2 < sda5 > [ 3.633167] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.800031] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 3.995048] vga16fb: initializing [ 3.995066] vga16fb: mapped to 0xc00a0000 [ 3.995498] fb0: VGA16 VGA frame buffer device [ 4.009926] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 4.009947] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 4.010786] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 [ 4.010804] alloc irq_desc for 23 on node -1 [ 4.010812] alloc kstat_irqs on node -1 [ 4.010835] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23 [ 4.021187] eth0: VIA Rhine II at 0xfdffd000, 00:30:18:ae:97:a8, IRQ 23. [ 4.021910] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 4.199737] Console: switching to colour frame buffer device 80x30 [ 4.520401] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0030180000a0fc4c] [ 5.236189] xor: automatically using best checksumming function: pIII_sse [ 5.256015] pIII_sse : 2224.000 MB/sec [ 5.256024] xor: using function: pIII_sse (2224.000 MB/sec) [ 5.301472] device-mapper: dm-raid45: initialized v0.2594b [ 5.669192] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 15.298036] Adding 2811896k swap on /dev/sda5. Priority:-1 extents:1 across:2811896k [ 15.516554] udev: starting version 151 [ 16.099970] lp: driver loaded but no devices found [ 16.181671] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.492649] parport_pc 00:0b: reported by Plug and Play ACPI [ 16.492711] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 16.567088] udev: renamed network interface eth0 to eth1 [ 16.674148] lp0: using parport0 (interrupt-driven). [ 17.186352] psmouse serio1: ID: 10 00 64 [ 17.410004] ppdev: user-space parallel port driver [ 17.680285] type=1505 audit(1596307315.517:2): operation="profile_load" pid=592 name="/sbin/dhclient3" [ 17.681200] type=1505 audit(1596307315.517:3): operation="profile_load" pid=592 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.681772] type=1505 audit(1596307315.517:4): operation="profile_load" pid=592 name="/usr/lib/connman/scripts/dhclient-script" [ 17.759589] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 18.741030] type=1505 audit(1596307316.577:5): operation="profile_load" pid=703 name="/usr/share/gdm/guest-session/Xsession" [ 18.747072] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 18.747093] alloc irq_desc for 22 on node -1 [ 18.747102] alloc kstat_irqs on node -1 [ 18.747126] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 18.747317] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 18.778899] type=1505 audit(1596307316.613:6): operation="profile_replace" pid=706 name="/sbin/dhclient3" [ 18.779857] type=1505 audit(1596307316.613:7): operation="profile_replace" pid=706 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 18.792389] type=1505 audit(1596307316.629:8): operation="profile_replace" pid=706 name="/usr/lib/connman/scripts/dhclient-script" [ 18.918949] eth1: link down [ 18.919934] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 18.938850] type=1505 audit(1596307316.773:9): operation="profile_load" pid=707 name="/usr/bin/evince" [ 18.986680] type=1505 audit(1596307316.821:10): operation="profile_load" pid=707 name="/usr/bin/evince-previewer" [ 19.002685] type=1505 audit(1596307316.837:11): operation="profile_load" pid=707 name="/usr/bin/evince-thumbnailer"