Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.8.0-pre1-6091-gf4fa8849a Machine configuration directory is '/home/josh/linuxcnc/configs/Bostomatic' Machine configuration file is 'Bostomatic.ini' INIFILE=/home/josh/linuxcnc/configs/Bostomatic/Bostomatic.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI=halui DISPLAY=gmoccapy COORDINATES=XYZAB KINEMATICS=trivkins coordinates=XYZAB Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui Found file(REL): ./Bostomatic.hal Shutting down and cleaning up LinuxCNC... Running HAL shutdown script hm2: loading Mesa HostMot2 driver version 0.15 hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 hm2_pci: discovered 5i25 at 0000:04:02.0 hm2/hm2_5i25.0: Smart Serial Firmware Version 43 Board hm2_5i25.0.7i77.0.0 Hardware Mode 0 = standard Board hm2_5i25.0.7i77.0.0 Software Mode 0 = input_output Board hm2_5i25.0.7i77.0.0 Software Mode 1 = io_analog Board hm2_5i25.0.7i77.0.0 Software Mode 2 = io_analog_fieldvoltage Board hm2_5i25.0.7i77.0.0 Software Mode 3 = io_encoder_analog_fieldvoltage Board hm2_5i25.0.7i77.0.1 Hardware Mode 0 = standard Board hm2_5i25.0.7i77.0.1 Software Mode 0 = analogout_enables hm2/hm2_5i25.0: 34 I/O Pins used: hm2/hm2_5i25.0: IO Pin 000 (P3-01): IOPort hm2/hm2_5i25.0: IO Pin 001 (P3-14): IOPort hm2/hm2_5i25.0: IO Pin 002 (P3-02): IOPort hm2/hm2_5i25.0: IO Pin 003 (P3-15): Smart Serial Interface #0, pin TxData1 (Output) hm2/hm2_5i25.0: IO Pin 004 (P3-03): Smart Serial Interface #0, pin RxData1 (Input) hm2/hm2_5i25.0: IO Pin 005 (P3-16): Smart Serial Interface #0, pin TxData0 (Output) hm2/hm2_5i25.0: IO Pin 006 (P3-04): Smart Serial Interface #0, pin RxData0 (Input) hm2/hm2_5i25.0: IO Pin 007 (P3-17): Muxed Encoder Select #0, pin Mux Select 0 (Output) hm2/hm2_5i25.0: IO Pin 008 (P3-05): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_5i25.0: IO Pin 009 (P3-06): Muxed Encoder #0, pin Muxed B (Input) hm2/hm2_5i25.0: IO Pin 010 (P3-07): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_5i25.0: IO Pin 011 (P3-08): Muxed Encoder #1, pin Muxed A (Input) hm2/hm2_5i25.0: IO Pin 012 (P3-09): Muxed Encoder #1, pin Muxed B (Input) hm2/hm2_5i25.0: IO Pin 013 (P3-10): Muxed Encoder #1, pin Muxed Index (Input) hm2/hm2_5i25.0: IO Pin 014 (P3-11): Muxed Encoder #2, pin Muxed A (Input) hm2/hm2_5i25.0: IO Pin 015 (P3-12): Muxed Encoder #2, pin Muxed B (Input) hm2/hm2_5i25.0: IO Pin 016 (P3-13): Muxed Encoder #2, pin Muxed Index (Input) hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort hm2/hm2_5i25.0: IO Pin 024 (P2-17): Muxed Encoder Select #6, pin Mux Select 0 (Output) hm2/hm2_5i25.0: IO Pin 025 (P2-05): Muxed Encoder #3, pin Muxed A (Input) hm2/hm2_5i25.0: IO Pin 026 (P2-06): Muxed Encoder #3, pin Muxed B (Input) hm2/hm2_5i25.0: IO Pin 027 (P2-07): Muxed Encoder #3, pin Muxed Index (Input) hm2/hm2_5i25.0: IO Pin 028 (P2-08): Muxed Encoder #4, pin Muxed A (Input) hm2/hm2_5i25.0: IO Pin 029 (P2-09): Muxed Encoder #4, pin Muxed B (Input) hm2/hm2_5i25.0: IO Pin 030 (P2-10): Muxed Encoder #4, pin Muxed Index (Input) hm2/hm2_5i25.0: IO Pin 031 (P2-11): Muxed Encoder #5, pin Muxed A (Input) hm2/hm2_5i25.0: IO Pin 032 (P2-12): Muxed Encoder #5, pin Muxed B (Input) hm2/hm2_5i25.0: IO Pin 033 (P2-13): Muxed Encoder #5, pin Muxed Index (Input) hm2/hm2_5i25.0: registered hm2_5i25.0: initialized AnyIO board at 0000:04:02.0 hm2_5i25.0: dropping AnyIO board at 0000:04:02.0 hm2/hm2_5i25.0: unregistered hm2_pci: driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime ./Bostomatic.hal:173: Pin 'hm2_5i25.0.7i77.0.0.input-01' was already linked to signal 'both-y' 2669 Stopping realtime threads Unloading hal components RTAPI_PCI: Unmapped 65536 bytes at 0x7fb63f594000 Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Fri May 14 21:46:37 PDT 2021 UTC Date: Sat May 15 04:46:37 UTC 2021 this program: /usr/bin/linuxcnc_info uptime: 21:46:37 up 43 min, 1 user, load average: 0.13, 0.20, 0.12 lsb_release -sa: Debian Debian GNU/Linux 9.13 (stretch) 9.13 stretch which linuxcnc: /usr/bin/linuxcnc pwd: /home/josh/linuxcnc/configs/Bostomatic USER: josh LOGNAME: josh HOME: /home/josh EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :0 DESKTOP: lightdm-xsession display size: 1024x768 pixels (270x203 millimeters) PATH: /usr/bin:/home/josh/linuxcnc/configs/Bostomatic/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: Bostomatic kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Debian 4.9.228-1 (2020-07-05) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-4.9.0-13-rt-amd64 root=UUID=4855323b-5d33-41de-90d4-1e3d4b02a0c6 ro quiet model name: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz cores: 4 cpu MHz: 2659.989 parport: 0000-0000 : parport0 0000-0000 : parport0 serial: 0000-0000 : serial 0000-0000 : serial Versions: gcc: gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516 python: Python 2.7.13 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.8.0-pre1-6091-gf4fa8849a LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /etc/init.d/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-======================-============================-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-cn 1:2.8.0~pre1.6091.gf4fa8849a all motion controller for CNC machines and robots (Chinese documentation) ii linuxcnc-doc-en 1:2.8.0~pre1.6091.gf4fa8849a all motion controller for CNC machines and robots (English documentation) ii linuxcnc-doc-es 1:2.8.0~pre1.6091.gf4fa8849a all motion controller for CNC machines and robots (Spanish documentation) ii linuxcnc-doc-fr 1:2.8.0~pre1.6091.gf4fa8849a all motion controller for CNC machines and robots (French documentation) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 1:2.8.0~pre1.6091.gf4fa8849a amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dbgsym 1:2.8.0~pre1.6091.gf4fa8849a amd64 Debug symbols for linuxcnc-uspace ii linuxcnc-uspace-dev 1:2.8.0~pre1.6091.gf4fa8849a amd64 PC based motion controller for real-time Linux