[ 0.000000] Linux version 5.10.0-8-rt-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT_RT Debian 5.10.46-5 (2021-09-23) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-rt-amd64 root=UUID=043e07fa-de70-400f-a794-9f5449278903 ro quiet isolcpus=1,2,3 idle=poll [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000b9373fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9374000-0x00000000b93a3fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b93a4000-0x00000000b93b3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b93b4000-0x00000000b98c8fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b98c9000-0x00000000b9b54fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9b55000-0x00000000b9b9ffff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000b9ba0000-0x00000000b9ba0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9ba1000-0x00000000b9be2fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9be3000-0x00000000b9d51fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9d52000-0x00000000b9ff9fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9ffa000-0x00000000b9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] process: using polling idle threads [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by American Megatrends [ 0.000000] efi: ACPI=0xb93ab000 ACPI 2.0=0xb93ab000 ESRT=0xb9b51098 SMBIOS=0xf0570 MOKvar=0xb7e17000 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 12/04/2018 [ 0.000000] tsc: Detected 2000.000 MHz processor [ 0.001359] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001366] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001381] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.001386] MTRR default type: uncachable [ 0.001389] MTRR fixed ranges enabled: [ 0.001391] 00000-9FFFF write-back [ 0.001394] A0000-BFFFF uncachable [ 0.001397] C0000-E7FFF write-through [ 0.001399] E8000-FFFFF write-protect [ 0.001402] MTRR variable ranges enabled: [ 0.001404] 0 base 000000000 mask F80000000 write-back [ 0.001408] 1 base 080000000 mask FC0000000 write-back [ 0.001411] 2 base 0BA800000 mask FFF800000 uncachable [ 0.001415] 3 base 0BB000000 mask FFF000000 uncachable [ 0.001418] 4 base 0BC000000 mask FFC000000 uncachable [ 0.001422] 5 base 100000000 mask FC0000000 write-back [ 0.001425] 6 disabled [ 0.001427] 7 disabled [ 0.001470] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001659] e820: update [mem 0xba800000-0xffffffff] usable ==> reserved [ 0.001669] last_pfn = 0xba000 max_arch_pfn = 0x400000000 [ 0.007439] found SMP MP-table at [mem 0x000fd840-0x000fd84f] [ 0.009852] RAMDISK: [mem 0x328f1000-0x3546ffff] [ 0.009859] ACPI: Early table checksum verification disabled [ 0.009864] ACPI: RSDP 0x00000000B93AB000 000024 (v02 ALASKA) [ 0.009872] ACPI: XSDT 0x00000000B93AB080 00007C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.009882] ACPI: FACP 0x00000000B93B2758 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.009891] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20200925/tbfadt-564) [ 0.009899] ACPI: DSDT 0x00000000B93AB188 0075C9 (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.009906] ACPI: FACS 0x00000000B98C8F80 000040 [ 0.009912] ACPI: APIC 0x00000000B93B2868 000084 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.009919] ACPI: FPDT 0x00000000B93B28F0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.009927] ACPI: MCFG 0x00000000B93B2938 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.009934] ACPI: LPIT 0x00000000B93B2978 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D) [ 0.009941] ACPI: HPET 0x00000000B93B2A80 000038 (v01 ALASKA A M I 01072009 AMI. 00000005) [ 0.009948] ACPI: SSDT 0x00000000B93B2AB8 000763 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.009956] ACPI: SSDT 0x00000000B93B3220 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109) [ 0.009963] ACPI: SSDT 0x00000000B93B34B0 00017A (v01 PmRef ApTst 00003000 INTL 20061109) [ 0.009970] ACPI: UEFI 0x00000000B93B3630 000042 (v01 ALASKA A M I 00000000 00000000) [ 0.009978] ACPI: BGRT 0x00000000B93B3678 000038 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.009984] ACPI: Reserving FACP table memory at [mem 0xb93b2758-0xb93b2863] [ 0.009987] ACPI: Reserving DSDT table memory at [mem 0xb93ab188-0xb93b2750] [ 0.009990] ACPI: Reserving FACS table memory at [mem 0xb98c8f80-0xb98c8fbf] [ 0.009992] ACPI: Reserving APIC table memory at [mem 0xb93b2868-0xb93b28eb] [ 0.009994] ACPI: Reserving FPDT table memory at [mem 0xb93b28f0-0xb93b2933] [ 0.009997] ACPI: Reserving MCFG table memory at [mem 0xb93b2938-0xb93b2973] [ 0.009999] ACPI: Reserving LPIT table memory at [mem 0xb93b2978-0xb93b2a7b] [ 0.010002] ACPI: Reserving HPET table memory at [mem 0xb93b2a80-0xb93b2ab7] [ 0.010004] ACPI: Reserving SSDT table memory at [mem 0xb93b2ab8-0xb93b321a] [ 0.010007] ACPI: Reserving SSDT table memory at [mem 0xb93b3220-0xb93b34af] [ 0.010009] ACPI: Reserving SSDT table memory at [mem 0xb93b34b0-0xb93b3629] [ 0.010012] ACPI: Reserving UEFI table memory at [mem 0xb93b3630-0xb93b3671] [ 0.010014] ACPI: Reserving BGRT table memory at [mem 0xb93b3678-0xb93b36af] [ 0.010030] ACPI: Local APIC address 0xfee00000 [ 0.010114] No NUMA configuration found [ 0.010116] Faking a node at [mem 0x0000000000000000-0x000000013fffffff] [ 0.010138] NODE_DATA(0) allocated [mem 0x13ffd4000-0x13fffefff] [ 0.010939] Zone ranges: [ 0.010941] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.010945] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.010948] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.010951] Device empty [ 0.010953] Movable zone start for each node [ 0.010961] Early memory node ranges [ 0.010962] node 0: [mem 0x0000000000001000-0x000000000008efff] [ 0.010965] node 0: [mem 0x0000000000090000-0x000000000009ffff] [ 0.010967] node 0: [mem 0x0000000000100000-0x000000001effffff] [ 0.010970] node 0: [mem 0x000000001f100000-0x000000001fffffff] [ 0.010972] node 0: [mem 0x0000000020100000-0x00000000b9373fff] [ 0.010975] node 0: [mem 0x00000000b9ba0000-0x00000000b9ba0fff] [ 0.010977] node 0: [mem 0x00000000b9be3000-0x00000000b9d51fff] [ 0.010979] node 0: [mem 0x00000000b9ffa000-0x00000000b9ffffff] [ 0.010982] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.010985] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] [ 0.010990] On node 0 totalpages: 1020552 [ 0.010992] DMA zone: 64 pages used for memmap [ 0.010994] DMA zone: 40 pages reserved [ 0.010996] DMA zone: 3998 pages, LIFO batch:0 [ 0.011712] DMA zone: 28770 pages in unavailable ranges [ 0.011715] DMA32 zone: 11788 pages used for memmap [ 0.011717] DMA32 zone: 754410 pages, LIFO batch:63 [ 0.027065] DMA32 zone: 27926 pages in unavailable ranges [ 0.027068] Normal zone: 4096 pages used for memmap [ 0.027070] Normal zone: 262144 pages, LIFO batch:63 [ 0.027753] x86/hpet: Will disable the HPET for this platform because it's not reliable [ 0.027759] Reserving Intel graphics memory at [mem 0xbb000000-0xbeffffff] [ 0.027957] ACPI: PM-Timer IO Port: 0x408 [ 0.027962] ACPI: Local APIC address 0xfee00000 [ 0.027973] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.027976] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.027979] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.027981] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.027994] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86 [ 0.028000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028005] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028008] ACPI: IRQ0 used by override. [ 0.028011] ACPI: IRQ9 used by override. [ 0.028014] Using ACPI (MADT) for SMP configuration information [ 0.028017] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.028027] TSC deadline timer available [ 0.028029] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028094] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028100] PM: hibernation: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.028105] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.028110] PM: hibernation: Registered nosave memory: [mem 0x1f000000-0x1f0fffff] [ 0.028114] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x200fffff] [ 0.028119] PM: hibernation: Registered nosave memory: [mem 0xb9374000-0xb93a3fff] [ 0.028121] PM: hibernation: Registered nosave memory: [mem 0xb93a4000-0xb93b3fff] [ 0.028123] PM: hibernation: Registered nosave memory: [mem 0xb93b4000-0xb98c8fff] [ 0.028125] PM: hibernation: Registered nosave memory: [mem 0xb98c9000-0xb9b54fff] [ 0.028127] PM: hibernation: Registered nosave memory: [mem 0xb9b55000-0xb9b9ffff] [ 0.028131] PM: hibernation: Registered nosave memory: [mem 0xb9ba1000-0xb9be2fff] [ 0.028136] PM: hibernation: Registered nosave memory: [mem 0xb9d52000-0xb9ff9fff] [ 0.028141] PM: hibernation: Registered nosave memory: [mem 0xba000000-0xbaffffff] [ 0.028143] PM: hibernation: Registered nosave memory: [mem 0xbb000000-0xbeffffff] [ 0.028144] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xe00f7fff] [ 0.028146] PM: hibernation: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff] [ 0.028148] PM: hibernation: Registered nosave memory: [mem 0xe00f9000-0xfed00fff] [ 0.028150] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.028152] PM: hibernation: Registered nosave memory: [mem 0xfed02000-0xfed07fff] [ 0.028154] PM: hibernation: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.028155] PM: hibernation: Registered nosave memory: [mem 0xfed09000-0xffafffff] [ 0.028157] PM: hibernation: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.028166] [mem 0xbf000000-0xe00f7fff] available for PCI devices [ 0.028169] Booting paravirtualized kernel on bare hardware [ 0.028173] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035625] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036375] percpu: Embedded 51 pages/cpu s171008 r8192 d29696 u524288 [ 0.036395] pcpu-alloc: s171008 r8192 d29696 u524288 alloc=1*2097152 [ 0.036401] pcpu-alloc: [0] 0 1 2 3 [ 0.036486] Built 1 zonelists, mobility grouping on. Total pages: 1004564 [ 0.036491] Policy zone: Normal [ 0.036495] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-rt-amd64 root=UUID=043e07fa-de70-400f-a794-9f5449278903 ro quiet isolcpus=1,2,3 idle=poll [ 0.037758] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038369] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.038437] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.089754] Memory: 3054208K/4082208K available (12295K kernel code, 2951K rwdata, 7560K rodata, 2308K init, 3348K bss, 218232K reserved, 0K cma-reserved) [ 0.089767] random: get_random_u64 called from __kmem_cache_create+0x2a/0x500 with crng_init=0 [ 0.090137] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.090179] Kernel/User page tables isolation: enabled [ 0.090219] ftrace: allocating 36283 entries in 142 pages [ 0.111055] ftrace: allocated 142 pages with 4 groups [ 0.111347] rcu: Preemptible hierarchical RCU implementation. [ 0.111350] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 0.111351] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.111354] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.111356] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.111357] No expedited grace period (rcu_normal_after_boot). [ 0.111358] Trampoline variant of Tasks RCU enabled. [ 0.111359] Rude variant of Tasks RCU enabled. [ 0.111360] Tracing variant of Tasks RCU enabled. [ 0.111360] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.111362] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.121553] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.122047] random: crng done (trusting CPU's manufacturer) [ 0.122096] Console: colour dummy device 80x25 [ 0.122102] printk: console [tty0] enabled [ 0.122146] ACPI: Core revision 20200925 [ 0.122299] APIC: Switch to symmetric I/O mode setup [ 0.122933] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a85c9bff6, max_idle_ns: 881590591483 ns [ 0.122945] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.00 BogoMIPS (lpj=8000000) [ 0.122952] pid_max: default: 32768 minimum: 301 [ 0.123023] LSM: Security Framework initializing [ 0.123036] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.123096] AppArmor: AppArmor initialized [ 0.123100] TOMOYO Linux initialized [ 0.123158] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.123182] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.123772] x86/cpu: VMX (outside TXT) disabled by BIOS [ 0.123807] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.123817] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.123820] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.123827] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.123830] Spectre V2 : Mitigation: Full generic retpoline [ 0.123832] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.123833] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.123836] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.123840] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.124026] Freeing SMP alternatives memory: 32K [ 0.125179] smpboot: CPU0: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz (family: 0x6, model: 0x37, stepping: 0x9) [ 0.125857] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver. [ 0.125874] ... version: 3 [ 0.125875] ... bit width: 40 [ 0.125877] ... generic registers: 2 [ 0.125878] ... value mask: 000000ffffffffff [ 0.125880] ... max period: 0000007fffffffff [ 0.125882] ... fixed-purpose events: 3 [ 0.125883] ... event mask: 0000000700000003 [ 0.126179] rcu: Hierarchical SRCU implementation. [ 0.126941] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.126941] smp: Bringing up secondary CPUs ... [ 0.126941] x86: Booting SMP configuration: [ 0.126941] .... node #0, CPUs: #1 #2 #3 [ 0.127498] smp: Brought up 1 node, 4 CPUs [ 0.127498] smpboot: Max logical packages: 1 [ 0.127498] smpboot: Total of 4 processors activated (16000.00 BogoMIPS) [ 0.136123] node 0 deferred pages initialised in 8ms [ 0.136947] devtmpfs: initialized [ 0.137075] x86/mm: Memory block size: 128MB [ 0.138675] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) [ 0.138681] PM: Registering ACPI NVS region [mem 0xb93b4000-0xb98c8fff] (5328896 bytes) [ 0.139038] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.139084] futex hash table entries: 1024 (order: 5, 131072 bytes, linear) [ 0.139213] pinctrl core: initialized pinctrl subsystem [ 0.139795] NET: Registered protocol family 16 [ 0.140059] audit: initializing netlink subsys (disabled) [ 0.140511] thermal_sys: Registered thermal governor 'fair_share' [ 0.140514] thermal_sys: Registered thermal governor 'bang_bang' [ 0.140516] thermal_sys: Registered thermal governor 'step_wise' [ 0.140518] thermal_sys: Registered thermal governor 'user_space' [ 0.140519] thermal_sys: Registered thermal governor 'power_allocator' [ 0.140554] cpuidle: using governor ladder [ 0.140572] cpuidle: using governor menu [ 0.140638] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.140641] ACPI: bus type PCI registered [ 0.140644] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.140829] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.140840] PCI: not using MMCONFIG [ 0.140852] PCI: Using configuration type 1 for base access [ 0.141358] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.141383] audit: type=2000 audit(1633774602.016:1): state=initialized audit_enabled=0 res=1 [ 0.143923] Kprobes globally optimized [ 0.144323] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.542190] ACPI: Added _OSI(Module Device) [ 0.542196] ACPI: Added _OSI(Processor Device) [ 0.542198] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.542200] ACPI: Added _OSI(Processor Aggregator Device) [ 0.542202] ACPI: Added _OSI(Linux-Dell-Video) [ 0.542205] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.542207] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.552989] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.559671] ACPI: Interpreter enabled [ 0.559709] ACPI: (supports S0 S5) [ 0.559713] ACPI: Using IOAPIC for interrupt routing [ 0.559784] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.561215] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.561252] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.561993] ACPI: Enabled 9 GPEs in block 00 to 3F [ 0.784050] ACPI: Power Resource [USBC] (on) [ 0.786639] ACPI: Power Resource [PLPE] (on) [ 0.787145] ACPI: Power Resource [PLPE] (on) [ 0.789275] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.789289] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.790330] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.790795] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 0.790800] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.791753] PCI host bridge to bus 0000:00 [ 0.791758] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.791762] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.791766] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.791770] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.791773] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.791777] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.791781] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.791784] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0916fff window] [ 0.791789] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.791813] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.792105] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.792119] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff] [ 0.792132] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref] [ 0.792144] pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087] [ 0.792167] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.792452] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601 [ 0.792471] pci 0000:00:13.0: reg 0x10: [io 0xf070-0xf077] [ 0.792482] pci 0000:00:13.0: reg 0x14: [io 0xf060-0xf063] [ 0.792493] pci 0000:00:13.0: reg 0x18: [io 0xf050-0xf057] [ 0.792503] pci 0000:00:13.0: reg 0x1c: [io 0xf040-0xf043] [ 0.792513] pci 0000:00:13.0: reg 0x20: [io 0xf020-0xf03f] [ 0.792524] pci 0000:00:13.0: reg 0x24: [mem 0xd0916000-0xd09167ff] [ 0.792577] pci 0000:00:13.0: PME# supported from D3hot [ 0.792862] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.792882] pci 0000:00:14.0: reg 0x10: [mem 0xd0900000-0xd090ffff 64bit] [ 0.792950] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.793229] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.793255] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff] [ 0.793270] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff] [ 0.793379] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.793643] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 [ 0.793667] pci 0000:00:1b.0: reg 0x10: [mem 0xd0910000-0xd0913fff 64bit] [ 0.793746] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.794006] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 0.794086] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.794356] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400 [ 0.794436] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.794714] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 [ 0.794793] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.795092] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400 [ 0.795172] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.795451] pci 0000:00:1d.0: [8086:0f34] type 00 class 0x0c0320 [ 0.795477] pci 0000:00:1d.0: reg 0x10: [mem 0xd0915000-0xd09153ff] [ 0.795597] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.795875] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.796208] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 0.796246] pci 0000:00:1f.3: reg 0x10: [mem 0xd0914000-0xd091401f] [ 0.796319] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.796794] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.796818] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.796848] pci 0000:01:00.0: reg 0x18: [mem 0xd0804000-0xd0804fff 64bit] [ 0.796867] pci 0000:01:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref] [ 0.796978] pci 0000:01:00.0: supports D1 D2 [ 0.796981] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.797212] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.797218] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.797224] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff] [ 0.797362] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.797386] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.797416] pci 0000:02:00.0: reg 0x18: [mem 0xd0704000-0xd0704fff 64bit] [ 0.797436] pci 0000:02:00.0: reg 0x20: [mem 0xd0700000-0xd0703fff 64bit pref] [ 0.797545] pci 0000:02:00.0: supports D1 D2 [ 0.797548] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.797771] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.797777] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.797782] pci 0000:00:1c.1: bridge window [mem 0xd0700000-0xd07fffff] [ 0.797971] pci 0000:03:00.0: [14e4:4353] type 00 class 0x028000 [ 0.798008] pci 0000:03:00.0: reg 0x10: [mem 0xd0600000-0xd0603fff 64bit] [ 0.798077] pci 0000:03:00.0: enabling Extended Tags [ 0.798216] pci 0000:03:00.0: supports D1 D2 [ 0.798219] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.798519] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 0.798527] pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd06fffff] [ 0.798635] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 1.007560] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.007728] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.007891] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.008055] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.008218] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.008380] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.008544] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.008706] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.009593] iommu: Default domain type: Translated [ 1.009685] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 1.009689] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.009700] pci 0000:00:02.0: vgaarb: bridge control possible [ 1.009703] vgaarb: loaded [ 1.009910] EDAC MC: Ver: 3.0.0 [ 1.010646] NetLabel: Initializing [ 1.010649] NetLabel: domain hash size = 128 [ 1.010651] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.010687] NetLabel: unlabeled traffic allowed by default [ 1.010689] PCI: Using ACPI for IRQ routing [ 1.016880] PCI: pci_cache_line_size set to 64 bytes [ 1.016991] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 1.016997] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff] [ 1.017001] e820: reserve RAM buffer [mem 0xb9374000-0xbbffffff] [ 1.017005] e820: reserve RAM buffer [mem 0xb9ba1000-0xbbffffff] [ 1.017009] e820: reserve RAM buffer [mem 0xb9d52000-0xbbffffff] [ 1.017012] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff] [ 1.017114] clocksource: Switched to clocksource tsc-early [ 1.052041] VFS: Disk quotas dquot_6.6.0 [ 1.052078] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.052528] AppArmor: AppArmor Filesystem Enabled [ 1.052586] pnp: PnP ACPI init [ 1.052727] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.053027] system 00:01: [io 0x0680-0x069f] has been reserved [ 1.053034] system 00:01: [io 0x0400-0x047f] has been reserved [ 1.053039] system 00:01: [io 0x0500-0x05fe] has been reserved [ 1.053043] system 00:01: [io 0x0600-0x061f] has been reserved [ 1.053058] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.053453] system 00:02: [io 0x0a00-0x0a2f] has been reserved [ 1.053460] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 1.053464] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 1.053477] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.054100] pnp 00:03: [dma 0 disabled] [ 1.054205] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.054812] pnp 00:04: [dma 0 disabled] [ 1.054928] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.055047] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.055173] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 (active) [ 1.056081] pnp 00:07: [dma 3] [ 1.056385] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active) [ 1.263484] system 00:08: [mem 0xe0000000-0xefffffff] could not be reserved [ 1.263491] system 00:08: [mem 0xfed01000-0xfed01fff] has been reserved [ 1.263496] system 00:08: [mem 0xfed03000-0xfed03fff] has been reserved [ 1.263501] system 00:08: [mem 0xfed04000-0xfed04fff] has been reserved [ 1.263505] system 00:08: [mem 0xfed0c000-0xfed0ffff] has been reserved [ 1.263510] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved [ 1.263515] system 00:08: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 1.263519] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.263524] system 00:08: [mem 0xfef00000-0xfeffffff] has been reserved [ 1.263537] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.263993] pnp: PnP ACPI: found 9 devices [ 1.273367] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.273531] NET: Registered protocol family 2 [ 1.273719] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.275253] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 1.275357] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 1.276088] TCP bind hash table entries: 32768 (order: 8, 1835008 bytes, linear) [ 1.276585] TCP: Hash tables configured (established 32768 bind 32768) [ 1.276806] UDP hash table entries: 2048 (order: 6, 262144 bytes, linear) [ 1.276944] UDP-Lite hash table entries: 2048 (order: 6, 262144 bytes, linear) [ 1.277140] NET: Registered protocol family 1 [ 1.277159] NET: Registered protocol family 44 [ 1.277179] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 1.277191] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 1.277197] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 1.277203] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 1.277209] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 1.277213] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 [ 1.277219] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 [ 1.277248] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 1.277253] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 1.277267] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 1.277271] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 1.277285] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 1.277289] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 1.277298] pci 0000:00:1c.3: BAR 14: no space for [mem size 0x00200000] [ 1.277302] pci 0000:00:1c.3: BAR 14: failed to assign [mem size 0x00200000] [ 1.277315] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 1.277319] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 1.277329] pci 0000:00:1c.2: BAR 13: assigned [io 0x1000-0x1fff] [ 1.277337] pci 0000:00:1c.3: BAR 13: assigned [io 0x2000-0x2fff] [ 1.277349] pci 0000:00:1c.3: BAR 14: no space for [mem size 0x00200000] [ 1.277353] pci 0000:00:1c.3: BAR 14: failed to assign [mem size 0x00200000] [ 1.277367] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 1.277371] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 1.277385] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 1.277389] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 1.277402] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 1.277407] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 1.277420] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 1.277424] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 1.277431] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.277436] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 1.277442] pci 0000:00:1c.0: bridge window [mem 0xd0800000-0xd08fffff] [ 1.277450] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 1.277454] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 1.277459] pci 0000:00:1c.1: bridge window [mem 0xd0700000-0xd07fffff] [ 1.277467] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 1.277471] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] [ 1.277476] pci 0000:00:1c.2: bridge window [mem 0xd0600000-0xd06fffff] [ 1.277484] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 1.277488] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 1.277499] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 1.277502] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 1.277506] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 1.277510] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.277513] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 1.277517] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 1.277520] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 1.277524] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xd0916fff window] [ 1.277528] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 1.277531] pci_bus 0000:01: resource 1 [mem 0xd0800000-0xd08fffff] [ 1.277535] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 1.277538] pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd07fffff] [ 1.277542] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 1.277546] pci_bus 0000:03: resource 1 [mem 0xd0600000-0xd06fffff] [ 1.277549] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 1.277725] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.295118] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x700 took 16563 usecs [ 1.295187] PCI: CLS 64 bytes, default 64 [ 1.295327] Trying to unpack rootfs image as initramfs... [ 2.753984] Freeing initrd memory: 44540K [ 2.753995] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.753997] software IO TLB: mapped [mem 0x00000000b5374000-0x00000000b9374000] (64MB) [ 2.754074] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a85c9bff6, max_idle_ns: 881590591483 ns [ 2.754124] clocksource: Switched to clocksource tsc [ 2.755359] Initialise system trusted keyrings [ 2.755385] Key type blacklist registered [ 2.755500] workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 2.759347] zbud: loaded [ 2.759924] integrity: Platform Keyring initialized [ 2.759932] Key type asymmetric registered [ 2.759935] Asymmetric key parser 'x509' registered [ 2.759955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.760690] io scheduler mq-deadline registered [ 2.762332] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.762366] efifb: probing for efifb [ 2.762402] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k [ 2.762406] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 2.762409] efifb: scrolling: redraw [ 2.762410] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.762665] Console: switching to colour frame buffer device 240x67 [ 2.775917] fb0: EFI VGA frame buffer device [ 2.777934] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.778159] 00:03: ttyS0 at I/O 0x3e0 (irq = 4, base_baud = 115200) is a 16550A [ 2.779662] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.781561] hpet: number irqs doesn't agree with number of timers [ 2.781611] Linux agpgart interface v0.103 [ 2.781706] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel [ 2.781708] AMD-Vi: AMD IOMMUv2 functionality not available on this system [ 2.782406] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 2.783187] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.783201] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.783547] mousedev: PS/2 mouse device common for all mice [ 2.783630] rtc_cmos 00:00: RTC can wake from S4 [ 2.784081] rtc_cmos 00:00: registered as rtc0 [ 2.784114] rtc_cmos 00:00: setting system clock to 2021-10-09T10:16:45 UTC (1633774605) [ 2.784162] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram [ 2.784191] intel_pstate: Intel P-state driver initializing [ 2.785476] NET: Registered protocol family 10 [ 2.806337] Segment Routing with IPv6 [ 2.806385] mip6: Mobile IPv6 [ 2.806389] NET: Registered protocol family 17 [ 2.806497] mpls_gso: MPLS GSO support [ 2.807101] microcode: sig=0x30679, pf=0x4, revision=0x90a [ 2.807136] microcode: Microcode Update Driver: v2.2. [ 2.807146] IPI shorthand broadcast: enabled [ 2.807162] sched_clock: Marking stable (2805952732, 998892)->(2812290660, -5339036) [ 2.807392] printk: console [tty0]: printing thread started [ 2.807442] registered taskstats version 1 [ 2.807467] Loading compiled-in X.509 certificates [ 2.898310] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 2.898353] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c' [ 2.898448] zswap: loaded using pool lzo/zbud [ 2.898774] Key type ._fscrypt registered [ 2.898777] Key type .fscrypt registered [ 2.898779] Key type fscrypt-provisioning registered [ 2.898887] AppArmor: AppArmor sha1 policy hashing enabled [ 2.909786] Freeing unused kernel image (initmem) memory: 2308K [ 2.911004] Write protecting the kernel read-only data: 22528k [ 2.912646] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 2.913129] Freeing unused kernel image (rodata/data gap) memory: 632K [ 2.987616] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.987641] x86/mm: Checking user space page tables [ 3.059197] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.059208] Run /init as init process [ 3.059211] with arguments: [ 3.059214] /init [ 3.059216] with environment: [ 3.059217] HOME=/ [ 3.059219] TERM=linux [ 3.059220] BOOT_IMAGE=/boot/vmlinuz-5.10.0-8-rt-amd64 [ 3.339421] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 3.355322] ACPI: Power Button [PWRB] [ 3.355463] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 3.355536] ACPI: Sleep Button [SLPB] [ 3.355659] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 3.371226] ACPI: Power Button [PWRF] [ 3.606535] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.607912] i2c i2c-0: 1/2 memory slots populated (from DMI) [ 3.608301] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 3.663860] SCSI subsystem initialized [ 3.715403] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.760640] ACPI: bus type USB registered [ 3.760708] usbcore: registered new interface driver usbfs [ 3.760737] usbcore: registered new interface driver hub [ 3.760771] usbcore: registered new device driver usb [ 3.787398] libphy: r8169: probed [ 3.787957] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl, 00:2e:5c:68:04:de, XID 2c9, IRQ 91 [ 3.787965] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 3.788044] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.797862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.818914] ehci-pci: EHCI PCI platform driver [ 3.830639] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.830668] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.830689] ehci-pci 0000:00:1d.0: debug port 2 [ 3.834635] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.845145] libphy: r8169: probed [ 3.845681] r8169 0000:02:00.0 eth1: RTL8168evl/8111evl, 00:2e:5c:68:04:df, XID 2c9, IRQ 92 [ 3.845689] r8169 0000:02:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 3.849447] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 3.862539] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0915000 [ 3.871843] r8169 0000:02:00.0 enp2s0: renamed from eth1 [ 3.875040] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.875256] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 3.875262] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.875266] usb usb1: Product: EHCI Host Controller [ 3.875269] usb usb1: Manufacturer: Linux 5.10.0-8-rt-amd64 ehci_hcd [ 3.875272] usb usb1: SerialNumber: 0000:00:1d.0 [ 3.875774] hub 1-0:1.0: USB hub found [ 3.875898] hub 1-0:1.0: 8 ports detected [ 3.908222] libata version 3.00 loaded. [ 3.935968] ahci 0000:00:13.0: version 3.0 [ 3.936201] ahci 0000:00:13.0: controller can't do DEVSLP, turning off [ 3.942317] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.942334] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 3.944731] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 3.944745] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.947115] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x2 impl SATA mode [ 3.947124] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso [ 3.950359] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 3.950365] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.950369] usb usb2: Product: xHCI Host Controller [ 3.950372] usb usb2: Manufacturer: Linux 5.10.0-8-rt-amd64 xhci-hcd [ 3.950374] usb usb2: SerialNumber: 0000:00:14.0 [ 3.951010] hub 2-0:1.0: USB hub found [ 3.951037] hub 2-0:1.0: 6 ports detected [ 3.952657] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.952668] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 3.952677] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 3.952823] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 3.952829] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.952833] usb usb3: Product: xHCI Host Controller [ 3.952835] usb usb3: Manufacturer: Linux 5.10.0-8-rt-amd64 xhci-hcd [ 3.952838] usb usb3: SerialNumber: 0000:00:14.0 [ 3.953424] hub 3-0:1.0: USB hub found [ 3.953449] hub 3-0:1.0: 1 port detected [ 3.976730] scsi host0: ahci [ 3.986478] scsi host1: ahci [ 3.986645] ata1: DUMMY [ 3.986652] ata2: SATA max UDMA/133 abar m2048@0xd0916000 port 0xd0916180 irq 93 [ 4.073189] ehci-pci 0000:00:1d.0: port 1 reset error -110 [ 4.206977] usb 2-1: new low-speed USB device number 2 using xhci_hcd [ 4.262469] checking generic (c0000000 7f0000) vs hw (d0000000 400000) [ 4.262476] checking generic (c0000000 7f0000) vs hw (c0000000 10000000) [ 4.262479] fb0: switching to inteldrmfb from EFI VGA [ 4.263329] Console: switching to colour dummy device 80x25 [ 4.263686] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.265066] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.287802] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0 [ 4.289967] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.292254] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 4.303025] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.303355] ata2.00: ATA-9: WDC WDS120G2G0A-00JH30, UE500000, max UDMA/133 [ 4.303359] ata2.00: 234455040 sectors, multi 1: LBA48 NCQ (depth 32) [ 4.308425] ata2.00: configured for UDMA/133 [ 4.318792] scsi 1:0:0:0: Direct-Access ATA WDC WDS120G2G0A- 0000 PQ: 0 ANSI: 5 [ 4.360745] usb 2-1: New USB device found, idVendor=045e, idProduct=07f8, bcdDevice= 3.00 [ 4.360754] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.360758] usb 2-1: Product: Wired Keyboard 600 [ 4.360761] usb 2-1: Manufacturer: Microsoft [ 4.393464] hid: raw HID events driver (C) Jiri Kosina [ 4.419948] usbcore: registered new interface driver usbhid [ 4.419954] usbhid: USB HID core driver [ 4.427834] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:045E:07F8.0001/input/input8 [ 4.488900] hid-generic 0003:045E:07F8.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-1/input0 [ 4.489830] input: Microsoft Wired Keyboard 600 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:045E:07F8.0002/input/input9 [ 4.490982] usb 2-2: new low-speed USB device number 3 using xhci_hcd [ 4.495646] fbcon: i915drmfb (fb0) is primary device [ 4.535236] Console: switching to colour frame buffer device 240x67 [ 4.547343] input: Microsoft Wired Keyboard 600 System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:045E:07F8.0002/input/input10 [ 4.547631] hid-generic 0003:045E:07F8.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-1/input1 [ 4.589893] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 4.642661] usb 2-2: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.00 [ 4.642670] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.642674] usb 2-2: Product: Microsoft USB Optical Mouse [ 4.642677] usb 2-2: Manufacturer: PixArt [ 4.645657] input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:00CB.0003/input/input11 [ 4.646117] hid-generic 0003:045E:00CB.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:14.0-2/input0 [ 4.654539] sd 1:0:0:0: [sda] 234455040 512-byte logical blocks: (120 GB/112 GiB) [ 4.654573] sd 1:0:0:0: [sda] Write Protect is off [ 4.654578] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.654629] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.674923] sda: sda1 sda2 sda3 [ 4.676729] sd 1:0:0:0: [sda] Attached SCSI disk [ 4.775003] usb 2-3: new high-speed USB device number 4 using xhci_hcd [ 4.838320] PM: Image not found (code -22) [ 4.924462] usb 2-3: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36 [ 4.924471] usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.924481] usb 2-3: Product: USB2.0 Hub [ 4.926201] hub 2-3:1.0: USB hub found [ 4.926548] hub 2-3:1.0: 4 ports detected [ 5.070427] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 5.215032] usb 2-3.1: new high-speed USB device number 5 using xhci_hcd [ 5.261077] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 5.315368] usb 2-3.1: New USB device found, idVendor=0781, idProduct=5572, bcdDevice= 1.26 [ 5.315378] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.315382] usb 2-3.1: Product: Cruzer Switch [ 5.315385] usb 2-3.1: Manufacturer: SanDisk [ 5.315387] usb 2-3.1: SerialNumber: 4C530001290420102445 [ 5.437557] systemd[1]: Inserted module 'autofs4' [ 5.534567] systemd[1]: systemd 247.3-6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 5.551137] systemd[1]: Detected architecture x86-64. [ 5.552218] systemd[1]: Set hostname to . [ 6.000712] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 6.060636] systemd[1]: Queued start job for default target Graphical Interface. [ 6.063573] systemd[1]: Created slice system-getty.slice. [ 6.064586] systemd[1]: Created slice system-modprobe.slice. [ 6.065520] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 6.066236] systemd[1]: Created slice User and Session Slice. [ 6.066559] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.067206] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.067438] systemd[1]: Reached target Remote File Systems. [ 6.067487] systemd[1]: Reached target Slices. [ 6.067969] systemd[1]: Listening on Syslog Socket. [ 6.068301] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.068488] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.068987] systemd[1]: Listening on Journal Audit Socket. [ 6.069337] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.069751] systemd[1]: Listening on Journal Socket. [ 6.071037] systemd[1]: Listening on udev Control Socket. [ 6.071408] systemd[1]: Listening on udev Kernel Socket. [ 6.074097] systemd[1]: Mounting Huge Pages File System... [ 6.077112] systemd[1]: Mounting POSIX Message Queue File System... [ 6.080420] systemd[1]: Mounting Kernel Debug File System... [ 6.085550] systemd[1]: Mounting Kernel Trace File System... [ 6.097846] systemd[1]: Starting Set the console keyboard layout... [ 6.111900] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 6.116625] systemd[1]: Starting Load Kernel Module configfs... [ 6.133087] systemd[1]: Starting Load Kernel Module drm... [ 6.142186] systemd[1]: Starting Load Kernel Module fuse... [ 6.151177] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.151328] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.166479] systemd[1]: Starting Journal Service... [ 6.176627] systemd[1]: Starting Load Kernel Modules... [ 6.191453] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.200343] systemd[1]: Starting Coldplug All udev Devices... [ 6.226503] systemd[1]: Mounted Huge Pages File System. [ 6.253805] systemd[1]: Mounted POSIX Message Queue File System. [ 6.254370] systemd[1]: Mounted Kernel Debug File System. [ 6.254909] systemd[1]: Mounted Kernel Trace File System. [ 6.262859] fuse: init (API version 7.32) [ 6.264449] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 6.265732] systemd[1]: modprobe@configfs.service: Succeeded. [ 6.266457] systemd[1]: Finished Load Kernel Module configfs. [ 6.272174] systemd[1]: modprobe@drm.service: Succeeded. [ 6.287553] systemd[1]: Finished Load Kernel Module drm. [ 6.288794] systemd[1]: modprobe@fuse.service: Succeeded. [ 6.289510] systemd[1]: Finished Load Kernel Module fuse. [ 6.315758] systemd[1]: Mounting FUSE Control File System... [ 6.325491] systemd[1]: Mounting Kernel Configuration File System... [ 6.326153] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 6.351136] systemd[1]: Finished Load Kernel Modules. [ 6.367457] systemd[1]: Finished Remount Root and Kernel File Systems. [ 6.368571] systemd[1]: Mounted FUSE Control File System. [ 6.369550] systemd[1]: Mounted Kernel Configuration File System. [ 6.391256] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 6.391398] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 6.393847] systemd[1]: Starting Load/Save Random Seed... [ 6.404705] systemd[1]: Starting Apply Kernel Variables... [ 6.427460] systemd[1]: Starting Create System Users... [ 6.508321] systemd[1]: Finished Load/Save Random Seed. [ 6.508804] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 6.511548] systemd[1]: Finished Apply Kernel Variables. [ 6.552033] systemd[1]: Finished Create System Users. [ 6.555024] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.672383] systemd[1]: Finished Create Static Device Nodes in /dev. [ 6.676896] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 7.141890] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 7.517077] systemd[1]: Finished Set the console keyboard layout. [ 7.517419] systemd[1]: Reached target Local File Systems (Pre). [ 7.883049] systemd[1]: Finished Coldplug All udev Devices. [ 7.886653] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 7.889660] systemd[1]: Starting Show Plymouth Boot Screen... [ 8.227314] parport_pc 00:07: reported by Plug and Play ACPI [ 8.227419] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE,EPP] [ 8.275419] systemd[1]: Started Show Plymouth Boot Screen. [ 8.275793] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. [ 8.276146] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. [ 8.276207] systemd[1]: Reached target Local Encrypted Volumes. [ 8.276247] systemd[1]: Reached target Paths. [ 8.311840] systemd[1]: Started Journal Service. [ 8.531353] systemd-journald[239]: Received client request to flush runtime journal. [ 8.722998] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 8.907454] bcma-pci-bridge 0000:03:00.0: enabling device (0000 -> 0002) [ 8.907619] bcma-pci-bridge 0000:03:00.0: bus0: Found chip with id 43224, rev 0x01 and package 0x08 [ 8.907654] bcma-pci-bridge 0000:03:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0) [ 8.907686] bcma-pci-bridge 0000:03:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0) [ 8.907740] bcma-pci-bridge 0000:03:00.0: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0) [ 8.975061] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A [ 8.975068] mei_txe 0000:00:1a.0: PCI INT A: not connected [ 9.370150] iTCO_vendor_support: vendor-support=0 [ 9.383126] input: PC Speaker as /devices/platform/pcspkr/input/input12 [ 9.398334] usb-storage 2-3.1:1.0: USB Mass Storage device detected [ 9.424559] at24 0-0050: supply vcc not found, using dummy regulator [ 9.435158] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 9.437218] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460) [ 9.461429] at24 0-0050: 256 byte spd EEPROM, read-only [ 9.478106] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.541094] scsi host2: usb-storage 2-3.1:1.0 [ 9.599362] usbcore: registered new interface driver usb-storage [ 9.683450] usbcore: registered new interface driver uas [ 9.719605] bcma-pci-bridge 0000:03:00.0: bus0: Bus registered [ 9.819842] cryptd: max_cpu_qlen set to 1000 [ 10.395013] Adding 1000444k swap on /dev/sda3. Priority:-2 extents:1 across:1000444k SSFS [ 10.477125] ppdev: user-space parallel port driver [ 10.616517] scsi 2:0:0:0: Direct-Access SanDisk Cruzer Switch 1.26 PQ: 0 ANSI: 6 [ 10.617088] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 10.617753] sd 2:0:0:0: [sdb] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 10.618418] sd 2:0:0:0: [sdb] Write Protect is off [ 10.618424] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 10.627120] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 10.697332] sdb: sdb1 [ 10.698724] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 10.864854] intel_rapl_common: Found RAPL domain package [ 10.864860] intel_rapl_common: Found RAPL domain core [ 11.095481] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 11.334259] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:hp [ 11.334270] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.334275] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 11.334279] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 11.334281] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 [ 11.334284] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 11.334287] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 11.469480] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 11.469695] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 11.865371] audit: type=1400 audit(1633774614.576:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=407 comm="apparmor_parser" [ 11.878097] audit: type=1400 audit(1633774614.588:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=405 comm="apparmor_parser" [ 11.891878] audit: type=1400 audit(1633774614.604:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=406 comm="apparmor_parser" [ 11.892226] audit: type=1400 audit(1633774614.604:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=406 comm="apparmor_parser" [ 11.892412] audit: type=1400 audit(1633774614.604:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=406 comm="apparmor_parser" [ 11.938349] audit: type=1400 audit(1633774614.648:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=413 comm="apparmor_parser" [ 11.951103] audit: type=1400 audit(1633774614.664:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=411 comm="apparmor_parser" [ 11.951458] audit: type=1400 audit(1633774614.664:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=411 comm="apparmor_parser" [ 11.991082] audit: type=1400 audit(1633774614.700:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=412 comm="apparmor_parser" [ 11.991422] audit: type=1400 audit(1633774614.704:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=412 comm="apparmor_parser" [ 12.028058] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.028642] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 12.030345] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 12.030900] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 12.036088] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 12.036644] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 12.503181] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1 [ 12.503192] b43: probe of bcma0:1 failed with error -524 [ 12.507649] Broadcom 43xx driver loaded [ Features: PNLS ] [ 12.678515] brcmsmac bcma0:1: mfg 4bf core 812 rev 23 class 0 irq 18 [ 12.702758] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 12.719929] brcmsmac bcma0:1 wlp3s0b1: renamed from wlan0 [ 13.999377] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw [ 14.004818] RTL8211E Gigabit Ethernet r8169-100:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [ 14.280598] r8169 0000:01:00.0 enp1s0: Link is Down [ 14.411277] RTL8211E Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE) [ 14.732766] r8169 0000:02:00.0 enp2s0: Link is Down [ 14.758600] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx-0.fw [ 14.761073] brcmsmac bcma0:1: firmware: direct-loading firmware brcm/bcm43xx_hdr-0.fw [ 14.802121] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 14.802135] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement) [ 14.890634] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 14.890649] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement) [ 15.881082] r8169 0000:01:00.0 enp1s0: Link is Up - 100Mbps/Full - flow control rx/tx [ 15.881106] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready [ 17.303111] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off [ 17.303134] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready [ 18.906803] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 18.906817] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement) [ 22.636312] wlp3s0b1: authenticate with 28:c6:8e:b8:51:aa [ 22.656901] wlp3s0b1: send auth to 28:c6:8e:b8:51:aa (try 1/3) [ 22.665800] wlp3s0b1: authenticated [ 22.667553] brcmsmac bcma0:1 wlp3s0b1: disabling HT/VHT/HE due to WEP/TKIP use [ 22.672289] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 1/3) [ 22.674992] wlp3s0b1: RX AssocResp from 28:c6:8e:b8:51:aa (capab=0x31 status=0 aid=1) [ 22.678243] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated [ 22.678251] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 22.683011] wlp3s0b1: associated [ 22.684719] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 161/256 dur 1794/1504 [ 22.692164] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 137/256 dur 1602/1504 [ 23.699745] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 157/256 dur 1762/1504 [ 23.699899] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0b1: link becomes ready [ 23.815143] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 335.654533] device-mapper: uevent: version 1.0.3 [ 335.665628] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 361.375630] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 361.586628] JFS: nTxBlock = 8192, nTxLock = 65536 [ 362.426420] QNX4 filesystem 0.2.3 registered. [ 363.003524] raid6: sse2x4 gen() 4779 MB/s [ 363.176416] raid6: sse2x4 xor() 1411 MB/s [ 363.939574] raid6: sse2x2 gen() 3680 MB/s [ 364.408832] raid6: sse2x2 xor() 2656 MB/s [ 364.812155] raid6: sse2x1 gen() 3198 MB/s [ 365.305200] raid6: sse2x1 xor() 1908 MB/s [ 365.305208] raid6: using algorithm sse2x4 gen() 4779 MB/s [ 365.305211] raid6: .... xor() 1411 MB/s, rmw enabled [ 365.305213] raid6: using ssse3x2 recovery algorithm [ 365.320977] xor: measuring software checksum speed [ 365.337228] prefetch64-sse : 7012 MB/sec [ 365.338862] generic_sse : 6310 MB/sec [ 365.338866] xor: using function: prefetch64-sse (7012 MB/sec) [ 366.781150] Btrfs loaded, crc32c=crc32c-intel [ 620.122466] perf: interrupt took too long (2548 > 2500), lowering kernel.perf_event_max_sample_rate to 78250 [ 840.122541] perf: interrupt took too long (3190 > 3185), lowering kernel.perf_event_max_sample_rate to 62500 [ 1160.126105] perf: interrupt took too long (3996 > 3987), lowering kernel.perf_event_max_sample_rate to 50000 [ 1306.533968] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 157/256 dur 1762/1504 [ 1427.102080] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=86195 end=86196) time 655 us, min 1073, max 1079, scanline start 1053, end 1097 [ 1740.123047] perf: interrupt took too long (5009 > 4995), lowering kernel.perf_event_max_sample_rate to 39750 [ 1977.935665] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=119245 end=119246) time 653 us, min 1073, max 1079, scanline start 1070, end 1114 [ 2134.406865] wlp3s0b1: disconnect from AP 28:c6:8e:b8:51:aa for new auth to 10:da:43:a9:f4:20 [ 2134.438481] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated [ 2134.438498] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 2134.438503] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 2134.439752] wlp3s0b1: authenticate with 10:da:43:a9:f4:20 [ 2134.457855] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 1/3) [ 2134.458092] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 2/3) [ 2134.458200] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 3/3) [ 2134.458291] wlp3s0b1: authentication with 10:da:43:a9:f4:20 timed out [ 2134.705370] wlp3s0b1: authenticate with 28:c6:8e:b8:51:aa [ 2134.710072] wlp3s0b1: send auth to 28:c6:8e:b8:51:aa (try 1/3) [ 2134.715512] wlp3s0b1: authenticated [ 2134.721262] brcmsmac bcma0:1 wlp3s0b1: disabling HT/VHT/HE due to WEP/TKIP use [ 2134.722406] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 1/3) [ 2134.826440] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 2/3) [ 2134.828860] wlp3s0b1: deauthenticated from 28:c6:8e:b8:51:aa while associating (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [ 2138.594051] wlp3s0b1: authenticate with 10:da:43:a9:f4:20 [ 2138.602386] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 1/3) [ 2138.604882] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 2/3) [ 2138.605100] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 3/3) [ 2138.605190] wlp3s0b1: authentication with 10:da:43:a9:f4:20 timed out [ 2139.690340] wlp3s0b1: authenticate with 28:c6:8e:b8:51:aa [ 2139.695311] wlp3s0b1: send auth to 28:c6:8e:b8:51:aa (try 1/3) [ 2139.696794] wlp3s0b1: authenticated [ 2139.707739] brcmsmac bcma0:1 wlp3s0b1: disabling HT/VHT/HE due to WEP/TKIP use [ 2139.710862] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 1/3) [ 2139.713647] wlp3s0b1: RX AssocResp from 28:c6:8e:b8:51:aa (capab=0x31 status=0 aid=1) [ 2139.714243] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated [ 2139.714249] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 2139.714252] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 2139.714268] wlp3s0b1: associated [ 2139.727654] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 161/256 dur 1794/1504 [ 2139.737510] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 137/256 dur 1602/1504 [ 2140.743036] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 157/256 dur 1762/1504 [ 2142.157062] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 0 addresses (implement) [ 2142.157465] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 2151.421412] wlp3s0b1: disconnect from AP 28:c6:8e:b8:51:aa for new auth to 10:da:43:a9:f4:20 [ 2151.450785] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated [ 2151.450798] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 2151.450803] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 2151.456169] wlp3s0b1: authenticate with 10:da:43:a9:f4:20 [ 2151.458042] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 1/3) [ 2151.468864] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 2/3) [ 2151.469027] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 3/3) [ 2151.469190] wlp3s0b1: authentication with 10:da:43:a9:f4:20 timed out [ 2151.687248] wlp3s0b1: authenticate with 28:c6:8e:b8:51:aa [ 2151.689522] wlp3s0b1: send auth to 28:c6:8e:b8:51:aa (try 1/3) [ 2151.696029] wlp3s0b1: authenticated [ 2151.696584] brcmsmac bcma0:1 wlp3s0b1: disabling HT/VHT/HE due to WEP/TKIP use [ 2151.706597] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 1/3) [ 2151.814778] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 2/3) [ 2151.817019] wlp3s0b1: deauthenticated from 28:c6:8e:b8:51:aa while associating (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [ 2155.570763] wlp3s0b1: authenticate with 10:da:43:a9:f4:20 [ 2155.588453] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 1/3) [ 2155.588616] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 2/3) [ 2155.588704] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 3/3) [ 2155.588790] wlp3s0b1: authentication with 10:da:43:a9:f4:20 timed out [ 2156.673764] wlp3s0b1: authenticate with 28:c6:8e:b8:51:aa [ 2156.675619] wlp3s0b1: send auth to 28:c6:8e:b8:51:aa (try 1/3) [ 2156.677121] wlp3s0b1: authenticated [ 2156.682952] brcmsmac bcma0:1 wlp3s0b1: disabling HT/VHT/HE due to WEP/TKIP use [ 2156.688306] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 1/3) [ 2156.691104] wlp3s0b1: RX AssocResp from 28:c6:8e:b8:51:aa (capab=0x31 status=0 aid=1) [ 2156.691663] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated [ 2156.691669] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 2156.691673] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 2156.691687] wlp3s0b1: associated [ 2156.726379] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 161/256 dur 1794/1504 [ 2156.737917] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 137/256 dur 1602/1504 [ 2157.745377] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 157/256 dur 1762/1504 [ 2159.295955] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 0 addresses (implement) [ 2159.301654] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 2202.608866] wlp3s0b1: disconnect from AP 28:c6:8e:b8:51:aa for new auth to 10:da:43:a9:f4:20 [ 2202.643859] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated [ 2202.643878] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 2202.643883] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 2202.644887] wlp3s0b1: authenticate with 10:da:43:a9:f4:20 [ 2202.646712] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 1/3) [ 2202.647052] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 2/3) [ 2202.652209] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 3/3) [ 2202.653518] wlp3s0b1: authentication with 10:da:43:a9:f4:20 timed out [ 2202.880410] wlp3s0b1: authenticate with 28:c6:8e:b8:51:aa [ 2202.892174] wlp3s0b1: send auth to 28:c6:8e:b8:51:aa (try 1/3) [ 2202.903367] wlp3s0b1: authenticated [ 2202.909147] brcmsmac bcma0:1 wlp3s0b1: disabling HT/VHT/HE due to WEP/TKIP use [ 2202.920805] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 1/3) [ 2203.023805] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 2/3) [ 2203.026282] wlp3s0b1: deauthenticated from 28:c6:8e:b8:51:aa while associating (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [ 2206.801502] wlp3s0b1: authenticate with 10:da:43:a9:f4:20 [ 2206.825446] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 1/3) [ 2206.825720] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 2/3) [ 2206.825812] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 3/3) [ 2206.825897] wlp3s0b1: authentication with 10:da:43:a9:f4:20 timed out [ 2207.973607] wlp3s0b1: authenticate with 28:c6:8e:b8:51:aa [ 2207.988238] wlp3s0b1: send auth to 28:c6:8e:b8:51:aa (try 1/3) [ 2207.990203] wlp3s0b1: authenticated [ 2208.001765] brcmsmac bcma0:1 wlp3s0b1: disabling HT/VHT/HE due to WEP/TKIP use [ 2208.004048] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 1/3) [ 2208.006677] wlp3s0b1: RX AssocResp from 28:c6:8e:b8:51:aa (capab=0x31 status=0 aid=1) [ 2208.007275] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated [ 2208.007281] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 2208.007284] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 2208.007299] wlp3s0b1: associated [ 2208.025338] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 161/256 dur 1794/1504 [ 2208.034153] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 137/256 dur 1602/1504 [ 2209.040580] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 157/256 dur 1762/1504 [ 2210.601447] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 0 addresses (implement) [ 2210.610658] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 2266.317445] wlp3s0b1: disconnect from AP 28:c6:8e:b8:51:aa for new auth to 10:da:43:a9:f4:20 [ 2266.353138] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated [ 2266.353154] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 2266.353159] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 2266.353694] wlp3s0b1: authenticate with 10:da:43:a9:f4:20 [ 2266.356517] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 1/3) [ 2266.356695] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 2/3) [ 2266.356784] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 3/3) [ 2266.356872] wlp3s0b1: authentication with 10:da:43:a9:f4:20 timed out [ 2266.553366] wlp3s0b1: authenticate with 28:c6:8e:b8:51:aa [ 2266.555936] wlp3s0b1: send auth to 28:c6:8e:b8:51:aa (try 1/3) [ 2266.564640] wlp3s0b1: authenticated [ 2266.566836] brcmsmac bcma0:1 wlp3s0b1: disabling HT/VHT/HE due to WEP/TKIP use [ 2266.571513] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 1/3) [ 2266.677096] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 2/3) [ 2266.680612] wlp3s0b1: deauthenticated from 28:c6:8e:b8:51:aa while associating (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [ 2270.400303] wlp3s0b1: authenticate with 10:da:43:a9:f4:20 [ 2270.415394] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 1/3) [ 2270.438755] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 2/3) [ 2270.438919] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 3/3) [ 2270.439009] wlp3s0b1: authentication with 10:da:43:a9:f4:20 timed out [ 2271.562784] wlp3s0b1: authenticate with 28:c6:8e:b8:51:aa [ 2271.571976] wlp3s0b1: send auth to 28:c6:8e:b8:51:aa (try 1/3) [ 2271.589705] wlp3s0b1: authenticated [ 2271.592767] brcmsmac bcma0:1 wlp3s0b1: disabling HT/VHT/HE due to WEP/TKIP use [ 2271.594973] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 1/3) [ 2271.601607] wlp3s0b1: RX AssocResp from 28:c6:8e:b8:51:aa (capab=0x31 status=0 aid=1) [ 2271.602136] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated [ 2271.602142] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 2271.602145] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 2271.603545] wlp3s0b1: associated [ 2271.611091] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 161/256 dur 1794/1504 [ 2271.626679] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 137/256 dur 1602/1504 [ 2272.634321] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 157/256 dur 1762/1504 [ 2274.548687] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 0 addresses (implement) [ 2274.549140] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 2314.958849] wlp3s0b1: disconnect from AP 28:c6:8e:b8:51:aa for new auth to 10:da:43:a9:f4:20 [ 2314.990068] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated [ 2314.990081] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 2314.990086] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 2314.991416] wlp3s0b1: authenticate with 10:da:43:a9:f4:20 [ 2314.993242] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 1/3) [ 2314.994335] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 2/3) [ 2314.995406] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 3/3) [ 2314.995529] wlp3s0b1: authentication with 10:da:43:a9:f4:20 timed out [ 2315.232854] wlp3s0b1: authenticate with 28:c6:8e:b8:51:aa [ 2315.239962] wlp3s0b1: send auth to 28:c6:8e:b8:51:aa (try 1/3) [ 2315.260227] wlp3s0b1: authenticated [ 2315.260503] brcmsmac bcma0:1 wlp3s0b1: disabling HT/VHT/HE due to WEP/TKIP use [ 2315.263719] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 1/3) [ 2315.366038] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 2/3) [ 2315.470088] wlp3s0b1: associate with 28:c6:8e:b8:51:aa (try 3/3) [ 2315.472463] wlp3s0b1: deauthenticated from 28:c6:8e:b8:51:aa while associating (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA) [ 2319.291145] wlp3s0b1: authenticate with 10:da:43:a9:f4:20 [ 2319.293297] wlp3s0b1: send auth to 10:da:43:a9:f4:20 (try 1/3) [ 2319.297081] wlp3s0b1: authenticated [ 2319.305565] brcmsmac bcma0:1 wlp3s0b1: disabling HT/VHT/HE as WMM/QoS is not supported by the AP [ 2319.307341] wlp3s0b1: associate with 10:da:43:a9:f4:20 (try 1/3) [ 2319.312411] wlp3s0b1: RX AssocResp from 10:da:43:a9:f4:20 (capab=0x1411 status=0 aid=3) [ 2319.316809] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated [ 2319.317785] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 2319.317790] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 2319.318503] wlp3s0b1: associated [ 2323.641170] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 0 addresses (implement) [ 2323.641643] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [ 3020.185185] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=181780 end=181781) time 190 us, min 1073, max 1079, scanline start 1069, end 1082 [ 3120.123837] perf: interrupt took too long (6284 > 6261), lowering kernel.perf_event_max_sample_rate to 31750 [ 4041.369695] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=243051 end=243052) time 1395 us, min 1073, max 1079, scanline start 1067, end 36 [ 5058.935234] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=304105 end=304106) time 754 us, min 1073, max 1079, scanline start 1034, end 1085 [ 6903.118608] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=414756 end=414757) time 627 us, min 1073, max 1079, scanline start 1045, end 1088 [ 8135.710199] show_signal_msg: 3 callbacks suppressed [ 8135.710207] qtvcp[13111]: segfault at 10 ip 000000000053bfa9 sp 00007fff5f262c20 error 4 in python3.9[41f000+288000] [ 8135.710229] Code: 2f 01 0f 84 f1 00 00 00 48 8b 7b 18 48 85 ff 0f 84 4f 94 ef ff 48 83 2f 01 0f 84 f2 00 00 00 48 8d 7b f0 4c 8b 1d 4f e6 3f 00 <49> 8b 53 10 8b 8a 94 02 00 00 85 c9 7e 09 83 e9 01 89 8a 94 02 00 [ 8486.911654] qtvcp[13662]: segfault at 8f7320 ip 00000000008f7320 sp 00007fffb2abd658 error 15 in python3.9[8f4000+47000] [ 8486.911688] Code: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <1c> 00 00 00 00 00 00 00 a0 6d 90 00 00 00 00 00 00 00 00 00 00 00 [ 8528.029683] qtvcp[14235]: segfault at 10 ip 000000000053bfa9 sp 00007ffcc1a5eac0 error 4 in python3.9[41f000+288000] [ 8528.029711] Code: 2f 01 0f 84 f1 00 00 00 48 8b 7b 18 48 85 ff 0f 84 4f 94 ef ff 48 83 2f 01 0f 84 f2 00 00 00 48 8d 7b f0 4c 8b 1d 4f e6 3f 00 <49> 8b 53 10 8b 8a 94 02 00 00 85 c9 7e 09 83 e9 01 89 8a 94 02 00 [ 8531.935076] qtvcp[14479]: segfault at 10 ip 000000000053bfa9 sp 00007ffeb05ef920 error 4 in python3.9[41f000+288000] [ 8531.935106] Code: 2f 01 0f 84 f1 00 00 00 48 8b 7b 18 48 85 ff 0f 84 4f 94 ef ff 48 83 2f 01 0f 84 f2 00 00 00 48 8d 7b f0 4c 8b 1d 4f e6 3f 00 <49> 8b 53 10 8b 8a 94 02 00 00 85 c9 7e 09 83 e9 01 89 8a 94 02 00 [ 8733.332633] qtvcp[14851]: segfault at 10 ip 000000000053bfa9 sp 00007fff3a988d40 error 4 in python3.9[41f000+288000] [ 8733.332663] Code: 2f 01 0f 84 f1 00 00 00 48 8b 7b 18 48 85 ff 0f 84 4f 94 ef ff 48 83 2f 01 0f 84 f2 00 00 00 48 8d 7b f0 4c 8b 1d 4f e6 3f 00 <49> 8b 53 10 8b 8a 94 02 00 00 85 c9 7e 09 83 e9 01 89 8a 94 02 00 [ 8772.228997] qtvcp[15235]: segfault at 10 ip 000000000053bfa9 sp 00007ffebe108ca0 error 4 in python3.9[41f000+288000] [ 8772.229027] Code: 2f 01 0f 84 f1 00 00 00 48 8b 7b 18 48 85 ff 0f 84 4f 94 ef ff 48 83 2f 01 0f 84 f2 00 00 00 48 8d 7b f0 4c 8b 1d 4f e6 3f 00 <49> 8b 53 10 8b 8a 94 02 00 00 85 c9 7e 09 83 e9 01 89 8a 94 02 00 [ 9101.755190] qtvcp[15755]: segfault at 10 ip 000000000053bfa9 sp 00007ffe43db1610 error 4 in python3.9[41f000+288000] [ 9101.755223] Code: 2f 01 0f 84 f1 00 00 00 48 8b 7b 18 48 85 ff 0f 84 4f 94 ef ff 48 83 2f 01 0f 84 f2 00 00 00 48 8d 7b f0 4c 8b 1d 4f e6 3f 00 <49> 8b 53 10 8b 8a 94 02 00 00 85 c9 7e 09 83 e9 01 89 8a 94 02 00 [ 9144.812043] qtvcp[16094]: segfault at 10 ip 000000000053bfa9 sp 00007ffd27dd2000 error 4 in python3.9[41f000+288000] [ 9144.812072] Code: 2f 01 0f 84 f1 00 00 00 48 8b 7b 18 48 85 ff 0f 84 4f 94 ef ff 48 83 2f 01 0f 84 f2 00 00 00 48 8d 7b f0 4c 8b 1d 4f e6 3f 00 <49> 8b 53 10 8b 8a 94 02 00 00 85 c9 7e 09 83 e9 01 89 8a 94 02 00 [ 9254.381702] qtvcp[16458]: segfault at 10 ip 000000000053bfa9 sp 00007ffc34bdcec0 error 4 in python3.9[41f000+288000] [ 9254.381735] Code: 2f 01 0f 84 f1 00 00 00 48 8b 7b 18 48 85 ff 0f 84 4f 94 ef ff 48 83 2f 01 0f 84 f2 00 00 00 48 8d 7b f0 4c 8b 1d 4f e6 3f 00 <49> 8b 53 10 8b 8a 94 02 00 00 85 c9 7e 09 83 e9 01 89 8a 94 02 00 [ 9390.942855] qtvcp[16851]: segfault at 10 ip 000000000053bfa9 sp 00007ffc821ca1b0 error 4 in python3.9[41f000+288000] [ 9390.942885] Code: 2f 01 0f 84 f1 00 00 00 48 8b 7b 18 48 85 ff 0f 84 4f 94 ef ff 48 83 2f 01 0f 84 f2 00 00 00 48 8d 7b f0 4c 8b 1d 4f e6 3f 00 <49> 8b 53 10 8b 8a 94 02 00 00 85 c9 7e 09 83 e9 01 89 8a 94 02 00 [ 9445.070344] qtvcp[17201]: segfault at 10 ip 000000000053bfa9 sp 00007ffc1c24f030 error 4 in python3.9[41f000+288000] [ 9445.070373] Code: 2f 01 0f 84 f1 00 00 00 48 8b 7b 18 48 85 ff 0f 84 4f 94 ef ff 48 83 2f 01 0f 84 f2 00 00 00 48 8d 7b f0 4c 8b 1d 4f e6 3f 00 <49> 8b 53 10 8b 8a 94 02 00 00 85 c9 7e 09 83 e9 01 89 8a 94 02 00 [12595.219100] brcmsmac bcma0:1: wl0: PSM microcode watchdog fired at 12283 (seconds). Resetting. [12595.219108] brcms_c_dpc : PSM Watchdog, chipid 0xa8d8, chiprev 0x1 [12595.219112] brcmsmac bcma0:1: wl0: fatal error, reinitializing [12595.220943] ieee80211 phy0: Hardware restart was requested [12595.260133] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement) [12595.264108] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated [12595.264121] brcmsmac bcma0:1: changing basic rates failed: -22 [12595.264143] brcmsmac bcma0:1: brcms_ops_bss_info_changed: cqm change: threshold -70, hys 4 (implement) [12595.264147] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [12595.264150] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement) [17769.202416] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=1066721 end=1066722) time 1293 us, min 1073, max 1079, scanline start 1032, end 1033 [17801.701882] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=1068671 end=1068672) time 329 us, min 1073, max 1079, scanline start 1061, end 1084 [20626.952704] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=1238186 end=1238187) time 1763 us, min 1073, max 1079, scanline start 1020, end 14 [22517.286213] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=1351606 end=1351607) time 1700 us, min 1073, max 1079, scanline start 1036, end 1081 [24780.318525] i915 0000:00:02.0: [drm] *ERROR* Atomic update failure on pipe A (start=1487388 end=1487389) time 846 us, min 1073, max 1079, scanline start 1025, end 1025 [31470.380373] qtvcp[17540]: segfault at 10 ip 000000000053bfa9 sp 00007ffdd55ce390 error 4 in python3.9[41f000+288000] [31470.380405] Code: 2f 01 0f 84 f1 00 00 00 48 8b 7b 18 48 85 ff 0f 84 4f 94 ef ff 48 83 2f 01 0f 84 f2 00 00 00 48 8d 7b f0 4c 8b 1d 4f e6 3f 00 <49> 8b 53 10 8b 8a 94 02 00 00 85 c9 7e 09 83 e9 01 89 8a 94 02 00 [32031.640578] wlp3s0b1: deauthenticating from 10:da:43:a9:f4:20 by local choice (Reason: 3=DEAUTH_LEAVING) [32031.700309] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: disassociated [32031.700322] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement) [32031.700326] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement) [32032.031525] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement) [32032.043535] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement) [32444.752241] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement) [32444.752255] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement) [32455.084568] qtvcp[30362]: segfault at 10 ip 000000000053bfa9 sp 00007ffd13016760 error 4 in python3.9[41f000+288000] [32455.084766] Code: 2f 01 0f 84 f1 00 00 00 48 8b 7b 18 48 85 ff 0f 84 4f 94 ef ff 48 83 2f 01 0f 84 f2 00 00 00 48 8d 7b f0 4c 8b 1d 4f e6 3f 00 <49> 8b 53 10 8b 8a 94 02 00 00 85 c9 7e 09 83 e9 01 89 8a 94 02 00 [32661.934036] qtvcp[31040]: segfault at 10 ip 000000000053bfa9 sp 00007fffcd3b4280 error 4 in python3.9[41f000+288000] [32661.934066] Code: 2f 01 0f 84 f1 00 00 00 48 8b 7b 18 48 85 ff 0f 84 4f 94 ef ff 48 83 2f 01 0f 84 f2 00 00 00 48 8d 7b f0 4c 8b 1d 4f e6 3f 00 <49> 8b 53 10 8b 8a 94 02 00 00 85 c9 7e 09 83 e9 01 89 8a 94 02 00