LINUXCNC - 2.8.2 Machine configuration directory is '/home/nico/linuxcnc/configs/linuxCNC_7i92' Machine configuration file is 'linuxCNC_7i92.ini' Starting LinuxCNC... Found file(REL): ./linuxCNC_7i92.hal Found file(REL): ./custom.hal 46137347 **** probe_screen GETINIINFO **** Preference file path: /home/nico/linuxcnc/configs/linuxCNC_7i92/linuxCNC_7i92.pref 44040195 spindle-vfd: device='/dev/ttyS0', baud=9600, bits=8, parity='none', stopbits=1, address=1, debug=1, PID=6030 Opening /dev/ttyS0 at 9600 bauds (none) read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0xe0 0xe0 0xf0 0x38 0x0f 0x9d 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0x60 0x60 0xb0 0x38 0x07 0x9d 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0x60 0x60 0xb0 0x18 0x0f 0x9d 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0x60 0xe0 0xf0 0x38 0x0f 0x9f 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0x60 0xe0 0xb0 0x18 0x0f 0xcf 0xff message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0xe0 0xe0 0xf0 0x38 0x0f 0x9d 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0xe0 0xe0 0xb0 0x38 0x0f 0x9d 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0xe0 0x60 0xf0 0x18 0x0f 0x9d 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0x60 0x60 0xb0 0x38 0x07 0x9d 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0x60 0xe0 0xf0 0x38 0x0f 0x9d 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0x60 0x60 0xf0 0x38 0x0f 0x9f 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): coShutting down and cleaning up LinuxCNC... toolnumber = 0 False Running HAL shutdown script task: 1726 cycles, min=0.000386, max=0.014841, avg=0.010066, 0 latency excursions (> 10x expected cycle time of 0.010000s) hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 192.168.1.121: INFO: Hardware address (MAC): 00:60:1b:13:05:cc hm2_eth: discovered 7I92 hm2/hm2_7i92.0: Low Level init 0.15 hm2/hm2_7i92.0: 34 I/O Pins used: hm2/hm2_7i92.0: IO Pin 000 (P2-01): IOPort hm2/hm2_7i92.0: IO Pin 001 (P2-14): IOPort hm2/hm2_7i92.0: IO Pin 002 (P2-02): StepGen #0, pin Step (Output) hm2/hm2_7i92.0: IO Pin 003 (P2-15): IOPort hm2/hm2_7i92.0: IO Pin 004 (P2-03): StepGen #0, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 005 (P2-16): StepGen #4, pin Step (Output) hm2/hm2_7i92.0: IO Pin 006 (P2-04): StepGen #1, pin Step (Output) hm2/hm2_7i92.0: IO Pin 007 (P2-17): IOPort hm2/hm2_7i92.0: IO Pin 008 (P2-05): StepGen #1, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 009 (P2-06): StepGen #2, pin Step (Output) hm2/hm2_7i92.0: IO Pin 010 (P2-07): StepGen #2, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 011 (P2-08): StepGen #3, pin Step (Output) hm2/hm2_7i92.0: IO Pin 012 (P2-09): StepGen #3, pin Direction (Output) hm2/hm2_7i92.0: IO Pin 013 (P2-10): IOPort hm2/hm2_7i92.0: IO Pin 014 (P2-11): IOPort hm2/hm2_7i92.0: IO Pin 015 (P2-12): IOPort hm2/hm2_7i92.0: IO Pin 016 (P2-13): IOPort hm2/hm2_7i92.0: IO Pin 017 (P1-01): IOPort hm2/hm2_7i92.0: IO Pin 018 (P1-14): IOPort hm2/hm2_7i92.0: IO Pin 019 (P1-02): IOPort hm2/hm2_7i92.0: IO Pin 020 (P1-15): IOPort hm2/hm2_7i92.0: IO Pin 021 (P1-03): IOPort hm2/hm2_7i92.0: IO Pin 022 (P1-16): IOPort hm2/hm2_7i92.0: IO Pin 023 (P1-04): IOPort hm2/hm2_7i92.0: IO Pin 024 (P1-17): IOPort hm2/hm2_7i92.0: IO Pin 025 (P1-05): IOPort hm2/hm2_7i92.0: IO Pin 026 (P1-06): IOPort hm2/hm2_7i92.0: IO Pin 027 (P1-07): IOPort hm2/hm2_7i92.0: IO Pin 028 (P1-08): IOPort hm2/hm2_7i92.0: IO Pin 029 (P1-09): IOPort hm2/hm2_7i92.0: IO Pin 030 (P1-10): IOPort hm2/hm2_7i92.0: IO Pin 031 (P1-11): IOPort hm2/hm2_7i92.0: IO Pin 032 (P1-12): IOPort hm2/hm2_7i92.0: IO Pin 033 (P1-13): IOPort hm2/hm2_7i92.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading mms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0x60 0x60 0xf0 0x38 0x0f 0x9d 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0xe0 0xe0 0xf0 0x38 0x0f 0x9f 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0x60 0x60 0xf0 0x38 0x0f 0x9d 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0xe0 0x60 0xf0 0x18 0x0f 0x9f 0xde message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0xe0 0xe0 0xb0 0x38 0x0f 0x9f 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0x60 0xe0 0xb0 0x38 0x07 0x9d 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0xe0 0x60 0xf0 0x18 0x0f 0x9f 0xfe message was incomplete, length still to read = [01] WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED read_setup: reading setup parameters: query_length = 6 hycomm query = [01][01][03][05][00][00][2C][4F] query_ret = 8 response_length_computed = 8 waiting for message (8 bytes)... read 7 bytes: 0xe0 0xe0 0xb0 0x38 0x0f 0x9f 0xfe message was incomplete, length still to read = [01] A non blocked signal was caught WAIT_DATA(): comms time out ERROR Communication time out (-12) read_setup: FAILED