---------------------------------------------------------------
New PathPilot start at Sat Feb  3 17:05:11 CST 2024
{
    "build": 3, 
    "kernels": [
        "4.11.9-rt7"
    ], 
    "status": "", 
    "version": "v2.10.1"
}
---------------------------------------------------------------
DEBUG not defined so python IS optimizing.
Disabling USB autosuspend
/home/operator/v2.10.1/venv
Entering Python virtual environment
shifttest result is 0
starting log rotator
setsid /home/operator/v2.10.1/scripts/logrotator.sh 3600 "/home/operator/gcode/logfiles/logrotate.conf" "/home/operator/gcode/logfiles/logrotate.status"
LOGROTATOR_PID: 2426
shifttest result is 0
shifttest result is 0
up 
Using locale ('en_US', 'UTF-8')
Using locale ('en_US', 'UTF-8') for string resources
Localization strings properly initialized.
sudo dmidecode -s system-product-name: OptiPlex 9020M
uname -a: Linux tormachpcnc 4.11.9-rt7 #1 SMP PREEMPT RT Fri Aug 4 12:03:32 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux
Setting environment...
EMC2VERSION=2.8.0~pre1
LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib
TMP_DIR=/tmp/linuxcnc
EMC2_HOME=/home/operator/tmc
LD_LIBRARY_PATH=/home/operator/tmc/lib
LINUXCNC_BIN_DIR=/home/operator/tmc/bin
NML_FILE=/home/operator/tmc/configs/common/linuxcnc.nml
PYTHONPATH=/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library
appending to Python sys.path
appending: /home/operator/tmc/python
appending: /home/operator/tmc/lib/python
appending: /home/operator/tmc/lib/python/support
appending: /home/operator/tmc/python/config_chooser
appending: /home/operator/tmc/python/pplogin
appending: /home/operator/tmc/python/pp_hub
appending: /home/operator/tmc/python/shape_library
PATH=/home/operator/v2.10.1/venv/bin:/home/operator/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/operator/teamviewerqs:/home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts
sudo dmidecode --string "baseboard-product-name" | grep "^[^#].*": 0Y5DDC
0Y5DDC
Portrait mode console not detected
Desired screen setup (pre-rotation) is: (1024, 768, 'normal')
['xrandr', '-q']: Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 476mm x 268mm
   1920x1080      60.0*+
   1680x1050      60.0  
   1280x1024      60.0  
   1440x900       59.9  
   1280x960       60.0  
   1366x768       59.8  
   1280x720       60.0  
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Primary output has name HDMI1 and rotation normal
Screen rotation is already correct, not changing it.
Changing screen resolution to 1024x768
up 
Using locale ('en_US', 'UTF-8')
Using locale ('en_US', 'UTF-8') for string resources
Localization strings properly initialized.
sudo dmidecode -s system-product-name: OptiPlex 9020M
uname -a: Linux tormachpcnc 4.11.9-rt7 #1 SMP PREEMPT RT Fri Aug 4 12:03:32 CDT 2017 x86_64 x86_64 x86_64 GNU/Linux
Setting environment...
EMC2VERSION=2.8.0~pre1
LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib
TMP_DIR=/tmp/linuxcnc
EMC2_HOME=/home/operator/tmc
LD_LIBRARY_PATH=/home/operator/tmc/lib
LINUXCNC_BIN_DIR=/home/operator/tmc/bin
NML_FILE=/home/operator/tmc/configs/common/linuxcnc.nml
PYTHONPATH=/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library
appending to Python sys.path
appending: /home/operator/tmc/python
appending: /home/operator/tmc/lib/python
appending: /home/operator/tmc/lib/python/support
appending: /home/operator/tmc/python/config_chooser
appending: /home/operator/tmc/python/pplogin
appending: /home/operator/tmc/python/pp_hub
appending: /home/operator/tmc/python/shape_library
PATH=/home/operator/v2.10.1/venv/bin:/home/operator/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/operator/teamviewerqs:/home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts
sudo dmidecode --string "baseboard-product-name" | grep "^[^#].*": 0Y5DDC
0Y5DDC
Portrait mode console not detected
Desired screen setup (pre-rotation) is: (1024, 768, 'normal')
['xrandr', '-q']: Screen 0: minimum 8 x 8, current 1024 x 768, maximum 32767 x 32767
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected primary 1024x768+0+0 (normal left inverted right x axis y axis) 476mm x 268mm
   1920x1080      60.0 +
   1680x1050      60.0  
   1280x1024      60.0  
   1440x900       59.9  
   1280x960       60.0  
   1366x768       59.8  
   1280x720       60.0  
   1024x768       60.0* 
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Primary output has name HDMI1 and rotation normal
Screen rotation is already correct, not changing it.
Screen resolution is already correct, not changing it.
touchscreen.py: touchscreen devices detected: []
touchscreen.py ending with code 1
Checking required additional .deb packages are installed
Checking for package blt installed
package: blt already installed.
Checking for proper grub configuration...
/etc/default/grub already configured for terminal output = vga_text on boot, no patch needed
/etc/default/grub already configured for usbcore.autosuspend=-1, no patch needed
Checking for proper samba configuration...
Total RAM: 16384 MB
/home/operator/tmc/scripts/drop_caches.sh starting . . .
xset -dpms: 
xset s off: 
touchscreen.py: touchscreen devices detected: []
touchscreen.py ending with code 1
eula.py: no need to display eula and get acceptance because marker file already exists
/home/operator/tmc/eula_agreed.txt
/home/operator/dropbox.py not present and executable.
Disabling ethernet rx irq coalescing
sudo ethtool --coalesce eth0 rx-usecs 0 rx-frames 1: 
sudo ethtool --show-coalesce eth0: Coalesce parameters for eth0:
Adaptive RX: off  TX: off
stats-block-usecs: 0
sample-interval: 0
pkt-rate-low: 0
pkt-rate-high: 0

rx-usecs: 0
rx-frames: 0
rx-usecs-irq: 0
rx-frames-irq: 0

tx-usecs: 0
tx-frames: 0
tx-usecs-irq: 0
tx-frames-irq: 0

rx-usecs-low: 0
rx-frame-low: 0
tx-usecs-low: 0
tx-frame-low: 0

rx-usecs-high: 0
rx-frame-high: 0
tx-usecs-high: 0
tx-frame-high: 0
USB mount point: /media/operator
sudo python /home/operator/tmc/scripts/update-cgconfig.py: Total RAM: 16384 MB
Utility CG Size: 6553 MB
Utility CG VM Size: 6553 MB
/etc/cgconfig.conf updated.
cgconfigparser successfully loaded /etc/cgconfig.conf
eula.py: no need to display eula and get acceptance because marker file already exists
/home/operator/tmc/eula_agreed.txt
eth0      Link encap:Ethernet  HWaddr 34:17:eb:d8:83:be  
          inet addr:10.10.10.9  Bcast:10.10.10.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:55 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:8509 (8.5 KB)
          Interrupt:20 Memory:f7d00000-f7d20000 

eth0 present on machine controller
top of pathpilotmanager.py while() loop
no update file found
/home/operator/tmc/bin/rtapi_app owner: 0, group: 0, mode" 104755
sudo chown root:root /home/operator/tmc/bin/rtapi_app: 
sudo chmod 4755 /home/operator/tmc/bin/rtapi_app: 
/home/operator/tmc/bin/rtapi_app owner: 0, group: 0 mode" 104755
done checking rtapi_app permissions
Running /home/operator/tmc/python/pplogin/pplogin.py
Using locale ('en_US', 'UTF-8')
Using locale ('en_US', 'UTF-8') for string resources
Localization strings properly initialized.
2024-02-03 17:05:28.727253 | pam module: pam_ce [/home/operator/v2.10.1/python/pplogin/pammgr.py:40]
2024-02-03 17:05:29.058953 CST (+0:00:00.331700) | pam_ce.py:constructor called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:32]
2024-02-03 17:05:29.089108 CST (+0:00:00.030155) | pam_ce.py:login() called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:60]
2024-02-03 17:05:29.090058 CST (+0:00:00.000950) | pam_ce.py:shutdown() called. [/home/operator/v2.10.1/python/pplogin/pam_ce.py:54]
Regenerating /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini because its dependent source files may have changed.
Generating linuxcnc ini file: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini
configured INI file: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini
set_comm_method.py ethernet
already setup for machine control by eth0 so not doing anything.
Ethernet attached FPGA.
[HOSTMOT2]DRIVER_PARAMS: board_ip=10.10.10.10 config="num_encoders=0 num_pwmgens=1 num_3pwmgens=0 num_stepgens=5"
params: board_ip=10.10.10.10 config="num_encoders=0 num_pwmgens=1 num_3pwmgens=0 num_stepgens=5"
FPGA IP address: 10.10.10.10
ip addr show eth0: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 34:17:eb:d8:83:be brd ff:ff:ff:ff:ff:ff
    inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0
       valid_lft forever preferred_lft forever

ip addr show eth0 | grep -w eth0:: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000

ip addr show eth0 | grep -w inet:     inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0

BEFORE disabling autonegotiation for eth0:
Settings for eth0:
	Supported ports: [ TP ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Full 
	Supported pause frame use: No
	Supports auto-negotiation: Yes
	Advertised link modes:  10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Full 
	Advertised pause frame use: No
	Advertised auto-negotiation: Yes
	Speed: 100Mb/s
	Duplex: Full
	Port: Twisted Pair
	PHYAD: 1
	Transceiver: internal
	Auto-negotiation: on
	MDI-X: on (auto)
	Supports Wake-on: pumbg
	Wake-on: g
	Current message level: 0x00000007 (7)
			       drv probe link
	Link detected: yes
ethtool returned 0 when turning autoneg off
2024-02-03 17:05:30,076 | INFO | monitor_dir_size | starting with interval 5 minutes [monitor_dir_size.py:124]
2024-02-03 17:05:30,129 | ERROR | monitor_dir_size | du failed with return code 1: /usr/bin/du: cannot access ‘/home/operator/gcode/E-stop Videos’: No such file or directory
 [monitor_dir_size.py:114]
Ethernet FPGA not found at IP address 10.10.10.10
/home/operator/v2.10.1/python/pathpilotmanager.py:2604: Warning: Source ID 3 was not found when attempting to remove it
  glib.source_remove(timeout_id)
Ethernet FPGA found at IP 10.10.10.10
FINAL settings for interface eth0:
Settings for eth0:
	Supported ports: [ TP ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Full 
	Supported pause frame use: No
	Supports auto-negotiation: Yes
	Advertised link modes:  Not reported
	Advertised pause frame use: No
	Advertised auto-negotiation: No
	Speed: 100Mb/s
	Duplex: Full
	Port: Twisted Pair
	PHYAD: 2
	Transceiver: internal
	Auto-negotiation: off
	MDI-X: on (auto)
	Supports Wake-on: pumbg
	Wake-on: g
	Current message level: 0x00000007 (7)
			       drv probe link
	Link detected: yes
Supported mesa ethernet boards: 7i97T, 7i97T
Mesa board type queried is supported by the config ini file so continuing.
Updated ini file with BOARD=7i97T and BITFILE=mesa/7i97t_7i76d.bin
['sudo', '/home/operator/tmc/bin/mesaflash', '--device', '7i97T', '--addr', '10.10.10.10', '--verify', '/home/operator/tmc/mesa/7i97t_7i76d.bin']
Checking file... OK
  File type: Efinix bin file
Verifying FLASH memory sectors starting from 0x100000...
  |VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
Board configuration verified successfully.
mesaflash returned 0
FPGA .bit file programming verified as correct.
ifconfig -a -s: Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP TX-OVR Flg
eth0       1500 0      2657      0      0 0          5363      0      0      0 BMRU
lo        65536 0        36      0      0 0            36      0      0      0 LRU
wlan0      1500 0        43      0      0 0             8      0      0      0 BMRU
wlan1      1500 0       110      0      6 0           104      0      0      0 BMRU

ip addr show eth0 | grep -w inet:     inet 10.10.10.9/24 brd 10.10.10.255 scope global eth0

Failed to get IP address for interface wlan0
Found spare network interface that does not have an ip address: wlan0
Data directory /home/operator/mill_data exists
['check_machine_tool_table.py', '/home/operator/mill_data/tool2.tbl', u'mill']
2024-02-03 17:05:44.743432 | tool file is /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:388]
2024-02-03 17:05:44.747525 CST (+0:00:00.004093) | machine type is mill [scripts/check_machine_tool_table.py:389]
2024-02-03 17:05:44.747751 CST (+0:00:00.000226) | Scanning mill tool table [scripts/check_machine_tool_table.py:131]
2024-02-03 17:05:44.747986 CST (+0:00:00.000235) | Found existing 1-256 tool.tbl file /home/operator/mill_data/tool.tbl, will migrate data to /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:151]
2024-02-03 17:05:44.783850 CST (+0:00:00.035864) | highest tool number: 1000 [scripts/check_machine_tool_table.py:274]
2024-02-03 17:05:44.784110 CST (+0:00:00.000260) | tool table is already up to date [scripts/check_machine_tool_table.py:278]
/home/operator/tmc/python/redis-upgrade.py /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini
redis-upgrade.py: checking to see if redis rdb file needs to be upgraded to aof
redis-upgrade.py: config ini filepath: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini
redis-upgrade.py: redis is configured for appendonly persistence.
redis-upgrade.py: nothing to do.
redis-upgrade.py returned 0
About to isolate real time cpu.
WARNING: Other partitions exists that might interfere with partitions created by this tool.
         This might be because you use systemd, which also defines CPU partitions.
partrt found at /home/operator/tmc/bin/partrt
Found 8 Intel(R) Core(TM) i7-4785T CPU @ 2.20GHz cpus found.
cpu_rt_bitmask: 0x80
Creating real time cpu partition with mask: 0x80
/home/operator/tmc/scripts/isolatecpus.py:
sudo env "PATH=$PATH" partrt create 0x80
/home/operator/tmc/scripts/isolatecpus.py:
System was successfylly divided into following partitions:
Isolated CPUs (rt):7
Non-isolated CPUS (nrt):0-6
About to run scripts/start_linuxcnc.
------------------------------------------------------------------------------
|                               start_linuxcnc                               |
------------------------------------------------------------------------------
prefix: /home/operator/tmc
exec_prefix: /home/operator/tmc
EMC2_BIN_DIR=/home/operator/tmc/bin
EMC2_RTLIB_DIR=/home/operator/tmc/rtlib
INIFILE: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini
expanded INIFILE: /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini
EXTRA_ARGS: 
RUN_IN_PLACE=yes
LINUXCNC version - 2.8.0~pre1
LINUXCNC_DIR=
LINUXCNC_BIN_DIR=/home/operator/tmc/bin
LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib
INIVAR=inivar
HALCMD=halcmd
inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python
new PYTHONPATH:  /home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library
Machine configuration directory is '/home/operator/tmc/configs/tormach_mill'
Machine configuration file is 'Basic7i97-1.ini'
INIFILE=/home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini
PARAMETER_FILE=~/mill_data/emc.var
Can not find -sec MOT -var MOT -num 1 
Can not find -sec IO -var IO -num 1 
TASK=milltask
HALUI=halui
DISPLAY=tormach_mill_ui.py
EMCDISPLAY_FULLPATH:  /home/operator/tmc/python/tormach_mill_ui.py
EMCDISPLAY_DIR:  /home/operator/tmc/python
inserted into PYTHONPATH:  /home/operator/tmc/python
new PYTHONPATH:  /home/operator/tmc/python:/home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library
NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml
User's HOME directory: /home/operator
appended to PYTHONPATH:  /home/operator/gcode/python
new PYTHONPATH:  /home/operator/tmc/python:/home/operator/tmc/configs/tormach_mill/python:/home/operator/tmc/python:/home/operator/tmc/lib/python:/home/operator/tmc/lib/python/support:/home/operator/tmc/python/config_chooser:/home/operator/tmc/python/pplogin:/home/operator/tmc/python/pp_hub:/home/operator/tmc/python/shape_library:/home/operator/gcode/python
Can not find -sec REDIS -var DISABLE_SERVER -num 1 
DISABLE_SERVER=
SERVER_PATH=~/tmc/bin/redis-server
~/tmc/bin/redis-server started with tilde
SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb
REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb
REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb
Can not find -sec REDIS -var SERVER_LOG -num 1 
SERVER_LOG=
Starting LinuxCNC...
Starting redis server program: 
redis server started as: '/home/operator/tmc/bin/redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 --appendonly yes --appendfsync everysec --auto-aof-rewrite-percentage 100 --auto-aof-rewrite-min-size 64mb', logging to: /dev/null
Starting LinuxCNC server program: linuxcncsvr
Starting LinuxCNC IO program: io
io started
halcmd loadusr io started
Starting HAL User Interface program: halui
halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini
halcmd -i /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini -f basic7i97.hal
Note: Using POSIX realtime
number of cpus found: 8
wrote rtapi_app pid 2924 to /sys/fs/cgroup/cpuset/rt/tasks
hm2: loading Mesa HostMot2 driver version 0.15
hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.3
iptables: No chain/target/match by that name.
hm2_eth: 10.10.10.10: Hardware address: 00:60:1b:17:80:02
hm2_eth: Unrecognized ethernet board found: 7I97T -- port names will be wrong
hm2_eth: discovered 7I97T
hm2/hm2_7i97.0: Smart Serial Firmware Version 43
Board hm2_7i97.0.7i76.0.0 Hardware Mode 0 = standard
Board hm2_7i97.0.7i76.0.0 Software Mode 0 = io_spin
Board hm2_7i97.0.7i76.0.0 Software Mode 1 = io_ana_spin
Board hm2_7i97.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv
hm2/hm2_7i97.0: inconsistent Module Descriptor for PWMGen, not loading driver
hm2/hm2_7i97.0:     Version = 1, expected 0
hm2/hm2_7i97.0:     NumRegisters = 5, expected 5
hm2/hm2_7i97.0:     InstanceStride = 0x00000004, expected 0x00000004
hm2/hm2_7i97.0:     MultipleRegisters = 0x00000003, expected 0x00000003
hm2/hm2_7i97.0: inconsistent Module Descriptor!
hm2/hm2_7i97.0: failed to parse Module Descriptor 7
board fails HM2 registration
hm2_eth: rtapi_app_main: Invalid argument (-22)
basic7i97.hal:11: waitpid failed /home/operator/tmc/bin/rtapi_app hm2_eth
basic7i97.hal:11: /home/operator/tmc/bin/rtapi_app exited without becoming ready
basic7i97.hal:11: insmod for hm2_eth failed, returned -1
HALCMD ini file /home/operator/tmc/configs/tormach_mill/Basic7i97-1.ini load failed with config file basic7i97.hal
Shutting down and cleaning up LinuxCNC...
2913
Killing linuxcncsvr
Killing task linuxcncsvr, PID=2913
  PID TTY      STAT   TIME COMMAND
1805
Killing redis-server
Killing task redis-server, PID=1805
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
Timeout, trying kill -9
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
  PID TTY      STAT   TIME COMMAND
 1805 ?        Ssl    0:00 /usr/bin/redis-server 127.0.0.1:6379       
Could not kill task redis-server, PID=1805
Stopping realtime threads
halcmd stop
Unloading hal components
halcmd unload all
hm2: unloading
Removing NML shared memory segments
rm /tmp/linuxcnc.lock
Cleanup done
Return code from linuxcnc script: 17
['check_machine_tool_table.py', '/home/operator/mill_data/tool2.tbl', u'mill', 'update-256']
2024-02-03 17:05:51.980783 | tool file is /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:388]
2024-02-03 17:05:51.984849 CST (+0:00:00.004066) | machine type is mill [scripts/check_machine_tool_table.py:389]
2024-02-03 17:05:51.985062 CST (+0:00:00.000213) | Back porting tools 1-256 to old mill tool.tbl file from file: /home/operator/mill_data/tool2.tbl [scripts/check_machine_tool_table.py:82]
2024-02-03 17:05:51.985284 CST (+0:00:00.000222) | opening file; /home/operator/mill_data/tool.tbl for writing [scripts/check_machine_tool_table.py:91]
2024-02-03 17:05:51.986524 CST (+0:00:00.001240) | stopping at tool 257 [scripts/check_machine_tool_table.py:111]
About to undo real time cpu isolation.
partrt found at /home/operator/tmc/bin/partrt
/home/operator/tmc/scripts/isolatecpus.py:
sudo env "PATH=$PATH" partrt undo
/home/operator/tmc/scripts/isolatecpus.py:
System was successfully restored
crash detection file unexpectedly exists - sending into config chooser.
Running /home/operator/tmc/python/config_chooser/config_chooser.py --ethernet 
config_chooser.py exiting with code 1
shifttest result is 1