LINUXCNC - 2.8.4 Machine configuration directory is '/home/manusha/in/linuxcnc/configs/manusha-cnc' Machine configuration file is 'manusha-cnc.ini' Starting LinuxCNC... . Found file(REL): ./manusha-cnc.hal Found file(REL): ./custom.hal Found file(LIB): /usr/share/linuxcnc/hallib/xhc-hb04.tcl xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: using std_start_pause_button APP: xhc-hb04-accels found: APP: monitor-xhc-hb04 found: #------------------------------------------------------------ This obsolete script: xhc-hb04-accels should be removed from LinuxCNC ini files (effective 2.8~pre) xhc-hb04.tcl now controls reduced wheel jogging accels using the hal pins: axis.L.jog-accel-fraction joint.N.jog-accel-fraction #------------------------------------------------------------ RTAPI: ERROR: Unexpected realtime delay on task 1 This Message will only display once per session. Run the Latency Test and resolve before continuing. /usr/bin/gmoccapy:312: GtkWarning: Invalid icon size 48 self.widgets.window1.show() task: main loop took 0.145270 seconds (gmoccapy:28841): GtkSourceView-CRITICAL **: gtk_source_language_manager_set_search_path: assertion `lm->priv->ids == NULL' failed task: main loop took 0.142941 seconds task: main loop took 0.180786 seconds (0, ' = ', '/usr/bin/gmoccapy') (1, ' = ', '-ini') (2, ' = ', '/home/manusha/in/linuxcnc/configs/manusha-cnc/manusha-cnc.ini') Entry = trivkins Entry = coordinates=XYZ found the following coordinates xyz **** GMOCCAPY GETINIINFO **** Number of joints = 3 3 COORDINATES found = xyz joint 0 = axis x joint 1 = axis y joint 2 = axis z {0: 'x', 1: 'y', 2: 'z'} **** GMOCCAPY GETINIINFO **** [KINS] KINESTYPE is trivkins **** GMOCCAPY GETINIINFO **** No MIN_ANGULAR_VELOCITY entry found in [DISPLAY] of INI file Using default value of 0.1 degree / min **** GMOCCAPY GETINIINFO **** No DEFAULT_ANGULAR_VELOCITY entry found in [DISPLAY] of INI file Using default value of 360 degree / min **** GMOCCAPY GETINIINFO **** No MAX_ANGULAR_VELOCITY entry found in [DISPLAY] of INI file Using default value of 3600 degree / min **** GMOCCAPY GETINIINFO **** No MAX_RAPID_OVERRIDE entry found in [DISPLAY] of INI file Default settings 100 % applied! **** GMOCCAPY GETINIINFO **** Preference file path: /home/manusha/in/linuxcnc/configs/manusha-cnc/manusha-cnc.pref **** GMOCCAPY GETINIINFO **** No DEFAULT_SPINDLE_SPEED entry found in [DISPLAY] of INI file **** GMOCCAPY INFO **** **** found valid probe config in INI File **** **** will use auto tool measurement **** **** GMOCCAPY INFO **** **** Entering make_DRO axis_list = ['x', 'y', 'z'] **** GMOCCAPY INFO **** **** Entering make ref axis button ('Filepath = ', '/usr/share/gmoccapy/images/ref_all.png') ('Filepath = ', '/usr/share/gmoccapy/images/ref_x.png') ('Filepath = ', '/usr/share/gmoccapy/images/ref_y.png') ('Filepath = ', '/usr/share/gmoccapy/images/ref_z.png') ('Filepath = ', '/usr/share/gmoccapy/images/unhome.png') **** GMOCCAPY INFO **** **** Entering make touch button **** GMOCCAPY INFO **** **** Entering make jog increments **** GMOCCAPY INFO **** **** Entering make jog button **** GMOCCAPY INFO **** **** Entering make macro button **** GMOCCAPY INFO **** File touch_plate.ngc of the macro ['touch_plate'] could not be found **** we searched in subdirectories: ['macros', 'psng/macros'] **** GMOCCAPY INFO **** File go_to_g54_origin.ngc of the macro ['go_to_g54_origin'] could not be found **** we searched in subdirectories: ['macros', 'psng/macros'] found 0 Macros **** GMOCCAPY INFO **** **** arrange DRO 3 **** GMOCCAPY INFO **** **** Place in table **** GMOCCAPY INFO **** **** get DRO order **** GMOCCAPY INFO **** **** arrange JOG button less than 6 axis ERROR, trying to initialize the user tabs or panels, check for typos ['notebook_mode'] **** GMOCCAPY INFO **** **** audio available! **** **** GMOCCAPY INFO **** **** Entering init gremlin **** Kinematics type changed ('_set_enable_tooltips = ', True) **** GMOCCAPY INFO **** **** No virtual keyboard installed, we checked for and . **** GMOCCAPY INFO: Gcode.lang found **** **** GMOCCAPY GETINIINFO **** Wrong entry [DISPLAY] CYCLE_TIME in INI File! Will use gmoccapy default 150 **** GMOCCAPY INFO : inifile = /home/manusha/in/linuxcnc/configs/manusha-cnc/manusha-cnc.ini ****: **** GMOCCAPY INFO : postgui halfile = custom_postgui.hal ****: Jog Pin Changed x+ Jog Button released = x+ Jog Pin Changed x- Jog Button released = x- Jog Pin Changed y+ Jog Button released = y+ Jog Pin Changed y- Jog Button released = y- Jog Pin Changed z+ Jog Button released = z+ Jog Pin Changed z- Jog Button released = z- This key has not been implemented yet Key None (0) was pressed 1 (None, 0) This key has not been implemented yet Key None (0) was pressed 0 (None, 1) estoping / killing gmoccapy Shutting down and cleaning up LinuxCNC... task: 11288 cycles, min=0.001265, max=0.180786, avg=0.011661, 3 latency excursions (> 10x expected cycle time of 0.010000s) xhc-hb04: waiting for XHC-HB04 device xhc-hb04: found XHC-HB04 device xhc-hb04: connection lost, cleaning up Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments