[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.51-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1333 SMP Mon Aug 10 16:51:40 BST 2020 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] On node 0 totalpages: 1012736 [ 0.000000] DMA zone: 2304 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 816128 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s49856 r8192 d23872 u81920 [ 0.000000] pcpu-alloc: s49856 r8192 d23872 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1010432 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 smsc95xx.macaddr=DC:A6:32:18:69:1D vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=17a11081-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x17cc0000-0x1bcc0000] (64MB) [ 0.000000] Memory: 3655620K/4050944K available (10240K kernel code, 725K rwdata, 2740K rodata, 2048K init, 853K bss, 133180K reserved, 262144K cma-reserved, 3264512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 30051 entries in 59 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x340/0x518 with crng_init=0 [ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000023] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000099] bcm2835: system timer (irq = 17) [ 0.000769] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000785] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000802] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000815] Switching to timer-based delay loop, resolution 18ns [ 0.001053] Console: colour dummy device 80x30 [ 0.001084] printk: console [tty1] enabled [ 0.001133] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.001153] pid_max: default: 32768 minimum: 301 [ 0.001465] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001487] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002644] Disabling memory control group subsystem [ 0.002744] CPU: Testing write buffer coherency: ok [ 0.003212] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004039] Setting up static identity map for 0x200000 - 0x20003c [ 0.004227] rcu: Hierarchical SRCU implementation. [ 0.004847] smp: Bringing up secondary CPUs ... [ 0.005981] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.007240] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.008442] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.008588] smp: Brought up 1 node, 4 CPUs [ 0.008604] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.008615] CPU: All CPU(s) started in HYP mode. [ 0.008626] CPU: Virtualization extensions available. [ 0.009388] devtmpfs: initialized [ 0.022455] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.022699] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.022725] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.030476] pinctrl core: initialized pinctrl subsystem [ 0.031567] NET: Registered protocol family 16 [ 0.035190] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.036879] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.036892] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.037214] Serial: AMBA PL011 UART driver [ 0.040549] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.060850] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-08-19 17:38, variant start [ 0.070889] raspberrypi-firmware soc:firmware: Firmware hash is e90cba19a98a0d1f2ef086b9cafcbca00778f094 [ 0.123736] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.128147] vgaarb: loaded [ 0.128600] SCSI subsystem initialized [ 0.128822] usbcore: registered new interface driver usbfs [ 0.128904] usbcore: registered new interface driver hub [ 0.129019] usbcore: registered new device driver usb [ 0.130545] clocksource: Switched to clocksource arch_sys_counter [ 0.882625] VFS: Disk quotas dquot_6.6.0 [ 0.882732] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.882903] FS-Cache: Loaded [ 0.883084] CacheFiles: Loaded [ 0.883869] simple-framebuffer: probe of 0.framebuffer failed with error -12 [ 0.893342] thermal_sys: Registered thermal governor 'step_wise' [ 0.893711] NET: Registered protocol family 2 [ 0.894461] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.894489] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.894564] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.894637] TCP: Hash tables configured (established 8192 bind 8192) [ 0.894778] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.894808] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.895042] NET: Registered protocol family 1 [ 0.895719] RPC: Registered named UNIX socket transport module. [ 0.895731] RPC: Registered udp transport module. [ 0.895743] RPC: Registered tcp transport module. [ 0.895754] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.895774] PCI: CLS 0 bytes, default 64 [ 0.897613] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 0.899693] Initialise system trusted keyrings [ 0.899906] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 0.910497] FS-Cache: Netfs 'nfs' registered for caching [ 0.911238] NFS: Registering the id_resolver key type [ 0.911268] Key type id_resolver registered [ 0.911280] Key type id_legacy registered [ 0.911302] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.912374] Key type asymmetric registered [ 0.912388] Asymmetric key parser 'x509' registered [ 0.912551] bounce: pool size: 64 pages [ 0.912609] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.912819] io scheduler mq-deadline registered [ 0.912832] io scheduler kyber registered [ 0.916549] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 0.916572] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 0.916635] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 [ 0.916699] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000 [ 0.972652] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC) [ 0.973000] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 0.973017] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.973037] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 0.973091] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 0.973327] pci 0000:00:00.0: PME# supported from D0 D3hot [ 0.976679] PCI: bus0: Fast back to back transfers disabled [ 0.976900] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 0.977043] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.977461] pci 0000:01:00.0: PME# supported from D0 D3cold [ 0.980850] PCI: bus1: Fast back to back transfers disabled [ 0.980907] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 0.980930] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 0.981008] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.981032] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 0.981336] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 0.981562] pcieport 0000:00:00.0: PME: Signaling with IRQ 55 [ 0.981930] pcieport 0000:00:00.0: AER: enabled with IRQ 55 [ 0.982226] pci 0000:01:00.0: enabling device (0140 -> 0142) [ 0.988845] iproc-rng200 fe104000.rng: hwrng registered [ 0.989165] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.989774] vc-sm: Videocore shared memory driver [ 0.990314] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.001975] brd: module loaded [ 1.013811] loop: module loaded [ 1.015120] Loading iSCSI transport class v2.0-870. [ 1.017023] libphy: Fixed MDIO Bus: probed [ 1.017606] bcmgenet fd580000.ethernet: failed to get enet clock [ 1.017625] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.017646] bcmgenet fd580000.ethernet: failed to get enet-wol clock [ 1.017666] bcmgenet fd580000.ethernet: failed to get enet-eee clock [ 1.017692] bcmgenet: Skipping UMAC reset [ 1.030619] libphy: bcmgenet MII bus: probed [ 1.120644] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.121629] usbcore: registered new interface driver r8152 [ 1.121693] usbcore: registered new interface driver lan78xx [ 1.121761] usbcore: registered new interface driver smsc95xx [ 1.122164] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.122197] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.124527] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890 [ 1.125774] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.125790] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.125805] usb usb1: Product: xHCI Host Controller [ 1.125819] usb usb1: Manufacturer: Linux 5.4.51-v7l+ xhci-hcd [ 1.125833] usb usb1: SerialNumber: 0000:01:00.0 [ 1.126417] hub 1-0:1.0: USB hub found [ 1.126508] hub 1-0:1.0: 1 port detected [ 1.127035] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.127059] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.127081] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.127520] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 1.127537] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.127551] usb usb2: Product: xHCI Host Controller [ 1.127565] usb usb2: Manufacturer: Linux 5.4.51-v7l+ xhci-hcd [ 1.127579] usb usb2: SerialNumber: 0000:01:00.0 [ 1.128124] hub 2-0:1.0: USB hub found [ 1.128196] hub 2-0:1.0: 4 ports detected [ 1.129626] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.129892] dwc_otg: FIQ enabled [ 1.129903] dwc_otg: NAK holdoff enabled [ 1.129914] dwc_otg: FIQ split-transaction FSM enabled [ 1.129929] Module dwc_common_port init [ 1.130329] usbcore: registered new interface driver uas [ 1.130429] usbcore: registered new interface driver usb-storage [ 1.130652] mousedev: PS/2 mouse device common for all mice [ 1.132656] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.135079] sdhci: Secure Digital Host Controller Interface driver [ 1.135091] sdhci: Copyright(c) Pierre Ossman [ 1.135641] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.136149] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.139814] ledtrig-cpu: registered to indicate activity on CPUs [ 1.140123] hidraw: raw HID events driver (C) Jiri Kosina [ 1.140292] usbcore: registered new interface driver usbhid [ 1.140303] usbhid: USB HID core driver [ 1.141325] vchiq: vchiq_init_state: slot_zero = (ptrval) [ 1.143180] [vc_sm_connected_init]: start [ 1.152097] [vc_sm_connected_init]: end - returning 0 [ 1.154143] Initializing XFRM netlink socket [ 1.154178] NET: Registered protocol family 17 [ 1.154293] Key type dns_resolver registered [ 1.154736] Registering SWP/SWPB emulation handler [ 1.155028] registered taskstats version 1 [ 1.155047] Loading compiled-in X.509 certificates [ 1.155540] Key type ._fscrypt registered [ 1.155552] Key type .fscrypt registered [ 1.165452] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.165517] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 29, base_baud = 0) is a PL011 rev2 [ 1.171509] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.172422] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.172437] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.222088] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.223736] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.225383] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.228337] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.229982] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.237128] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 1.239898] of_cfs_init [ 1.240135] of_cfs_init: OK [ 1.241233] Waiting for root device PARTUUID=17a11081-02... [ 1.277545] random: fast init done [ 1.340476] mmc0: new ultra high speed DDR50 SDXC card at address aaaa [ 1.341423] mmcblk0: mmc0:aaaa SR64G 59.5 GiB [ 1.344097] mmc1: new high speed SDIO card at address 0001 [ 1.344796] mmcblk0: p1 p2 [ 1.368075] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.368136] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.368733] devtmpfs: mounted [ 1.376663] Freeing unused kernel memory: 2048K [ 1.400841] Run /sbin/init as init process [ 1.490605] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.673254] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 1.673271] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.673287] usb 1-1: Product: USB2.0 Hub [ 1.675166] hub 1-1:1.0: USB hub found [ 1.675488] hub 1-1:1.0: 4 ports detected [ 1.775755] systemd[1]: System time before build time, advancing clock. [ 1.874072] NET: Registered protocol family 10 [ 1.875446] Segment Routing with IPv6 [ 1.906632] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 1.907846] systemd[1]: Detected architecture arm. [ 1.971656] systemd[1]: Set hostname to . [ 1.977706] random: systemd: uninitialized urandom read (16 bytes read) [ 1.977765] systemd[1]: Initializing machine ID from random generator. [ 1.977936] systemd[1]: Installed transient /etc/machine-id file. [ 2.000599] usb 1-1.3: new low-speed USB device number 3 using xhci_hcd [ 2.141015] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c016, bcdDevice= 3.40 [ 2.141036] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.141052] usb 1-1.3: Product: Optical USB Mouse [ 2.141067] usb 1-1.3: Manufacturer: Logitech [ 2.150795] input: Logitech Optical USB Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C016.0001/input/input0 [ 2.151172] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:01:00.0-1.3/input0 [ 2.641926] random: systemd: uninitialized urandom read (16 bytes read) [ 2.652494] random: systemd: uninitialized urandom read (16 bytes read) [ 2.653140] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.674794] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 2.676873] systemd[1]: Created slice User and Session Slice. [ 2.677626] systemd[1]: Listening on Journal Socket (/dev/log). [ 2.678257] systemd[1]: Listening on udev Control Socket. [ 2.791885] i2c /dev entries driver [ 3.237595] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 3.336920] systemd-journald[105]: Received request to flush runtime journal from PID 1 [ 3.911839] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [ 3.912355] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [ 3.912755] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [ 3.913153] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [ 3.987313] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 3.990297] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 3.990319] [vc_sm_connected_init]: start [ 3.990600] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 3.996007] [vc_sm_connected_init]: installed successfully [ 3.999312] bcm2835_audio bcm2835_audio: card created with 8 channels [ 4.006766] mc: Linux media interface: v0.10 [ 4.100298] videodev: Linux video capture interface: v2.00 [ 4.145109] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 4.147612] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 4.154048] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 4.156012] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 4.171561] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 4.194454] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 4.195858] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 4.196364] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 4.197208] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 4.197243] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 4.197272] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 4.197291] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 4.197310] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 4.197546] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 4.198147] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 4.198189] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 4.214127] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 4.214246] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 4.231101] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 4.231144] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 4.459185] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.490684] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 4.593306] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.627819] [drm] No displays found. Consider forcing hotplug if HDMI is attached [ 4.627941] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [ 4.628052] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.628073] [drm] No driver support for vblank timestamp query. [ 4.628085] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL [ 4.634938] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 4.670897] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 4.683666] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.684614] usbcore: registered new interface driver brcmfmac [ 4.703964] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 [ 4.939852] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 4.962705] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01-88ee44ea [ 6.461252] uart-pl011 fe201000.serial: no DMA platform data [ 6.660823] random: crng init done [ 6.660840] random: 7 urandom warning(s) missed due to ratelimiting [ 6.755836] 8021q: 802.1Q VLAN Support v1.8 [ 6.970881] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 7.015131] EXT4-fs (mmcblk0p2): resizing filesystem from 866304 to 15525376 blocks [ 7.855995] bcmgenet: Skipping UMAC reset [ 7.858332] bcmgenet fd580000.ethernet: configuring instance for external RGMII [ 7.858694] bcmgenet fd580000.ethernet eth0: Link is Down [ 13.050775] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 13.050803] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.528405] Bluetooth: Core ver 2.22 [ 13.528445] NET: Registered protocol family 31 [ 13.528451] Bluetooth: HCI device and connection manager initialized [ 13.528463] Bluetooth: HCI socket layer initialized [ 13.528471] Bluetooth: L2CAP socket layer initialized [ 13.528485] Bluetooth: SCO socket layer initialized [ 13.700154] Bluetooth: HCI UART driver ver 2.3 [ 13.700163] Bluetooth: HCI UART protocol H4 registered [ 13.700203] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 13.700331] Bluetooth: HCI UART protocol Broadcom registered [ 14.742169] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead [ 15.228184] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.228202] Bluetooth: BNEP filters: protocol multicast [ 15.228228] Bluetooth: BNEP socket layer initialized [ 15.436552] Bluetooth: RFCOMM TTY layer initialized [ 15.436573] Bluetooth: RFCOMM socket layer initialized [ 15.436589] Bluetooth: RFCOMM ver 1.11 [ 17.366622] EXT4-fs (mmcblk0p2): resized to 6291456 blocks [ 28.284947] EXT4-fs (mmcblk0p2): resized to 12058624 blocks [ 29.297301] broken atomic modeset userspace detected, disabling atomic [ 31.116643] broken atomic modeset userspace detected, disabling atomic [ 32.154274] broken atomic modeset userspace detected, disabling atomic [ 32.731731] broken atomic modeset userspace detected, disabling atomic [ 33.752651] broken atomic modeset userspace detected, disabling atomic [ 34.634313] broken atomic modeset userspace detected, disabling atomic [ 34.656221] EXT4-fs (mmcblk0p2): resized filesystem to 15525376 [ 36.013851] broken atomic modeset userspace detected, disabling atomic [ 36.592442] broken atomic modeset userspace detected, disabling atomic [ 37.412872] broken atomic modeset userspace detected, disabling atomic [ 37.996989] broken atomic modeset userspace detected, disabling atomic [ 38.995965] broken atomic modeset userspace detected, disabling atomic [ 39.572371] broken atomic modeset userspace detected, disabling atomic [ 40.588101] broken atomic modeset userspace detected, disabling atomic [ 41.433430] broken atomic modeset userspace detected, disabling atomic [ 42.437858] broken atomic modeset userspace detected, disabling atomic [ 43.002869] broken atomic modeset userspace detected, disabling atomic