--------------------------------------------------------------- New PathPilot start at Thu Feb 8 09:34:55 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1572 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. Config picker exited when user pressed exit button terminating log rotator and subprocesses kill -KILL 1576 kill -KILL 1572 /home/operator/operator_login: line 258: 1572 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 File /home/operator/update_file.txt not found. No software update to perform. /usr/lib/pymodules/python2.6/gtk-2.0/gtk/__init__.py:57: GtkWarning: could not open display warnings.warn(str(e), _gtk.Warning) /home/operator/tmc/python/config_picker/config_picker.py:40: Warning: invalid (NULL) pointer instance builder.add_from_file(item) /home/operator/tmc/python/config_picker/config_picker.py:40: Warning: g_signal_connect_data: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed builder.add_from_file(item) --------------------------------------------------------------- New PathPilot start at Thu Feb 8 09:37:43 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1451 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 1 on device /dev/input/event4 key lalt is testing 1 on device /dev/input/event4 deviceresult = 1 shifttest result is 1 starting gnome-panel --------------------------------------------------------------- New PathPilot start at Thu Feb 8 10:17:12 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1481 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. ~/tmc/configs/tormach_mill/tormach_1100-3.ini Writing config file name ~/tmc/configs/tormach_mill/tormach_1100-3.ini to /home/operator/config_file.txt File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator Creating default tool table in /home/operator/lathe_data/tool.tbl /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl generating empty mill tool table Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 10:17:27 Smart Cool: HAL component: started 2018-02-08 10:17:27 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 10:17:27 tormach_mill_5i25.hal:228: parameter or pin 'hm2_5i25.0.gpio.005.is_output' not found Shutting down and cleaning up LinuxCNC... 1543 Killing linuxcncsvr Killing task linuxcncsvr, PID=1543 PID TTY STAT TIME COMMAND 1542 Killing redis-server Killing task redis-server, PID=1542 PID TTY STAT TIME COMMAND 1542 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 10:17:27 tormachheightgauge: exiting Smart Cool: HAL component : exited 2018-02-08 10:17:27 Z-Bot ATC : HAL component : exited 2018-02-08 10:17:27 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1514 TERM kill -TERM 1514 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1485 kill -KILL 1481 /home/operator/operator_login: line 258: 1481 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1481) - No such process kill -KILL 1481 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1481) - No such process --------------------------------------------------------------- New PathPilot start at Thu Feb 8 10:18:56 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1413 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 1 on device /dev/input/event4 key lalt is testing 1 on device /dev/input/event4 deviceresult = 1 shifttest result is 1 starting gnome-panel --------------------------------------------------------------- New PathPilot start at Thu Feb 8 10:39:15 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1410 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 10:39:20 Smart Cool: HAL component: started 2018-02-08 10:39:20 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 10:39:20 tormach_mill_5i25.hal:228: parameter or pin 'hm2_5i25.0.gpio.005.is_output' not found Shutting down and cleaning up LinuxCNC... 1469 Killing linuxcncsvr Killing task linuxcncsvr, PID=1469 PID TTY STAT TIME COMMAND 1468 Killing redis-server Killing task redis-server, PID=1468 PID TTY STAT TIME COMMAND 1468 ? Sl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 10:39:21 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-08 10:39:21 Smart Cool: HAL component : exited 2018-02-08 10:39:21 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1440 TERM kill -TERM 1440 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1414 kill -KILL 1410 /home/operator/operator_login: line 258: 1410 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1410) - No such process kill -KILL 1410 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1410) - No such process --------------------------------------------------------------- New PathPilot start at Thu Feb 8 11:13:43 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1412 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 11:13:48 Smart Cool: HAL component: started 2018-02-08 11:13:48 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 11:13:48 tormach_mill_5i25.hal:228: parameter or pin 'hm2_5i25.0.gpio.005.is_output' not found Shutting down and cleaning up LinuxCNC... 1471 Killing linuxcncsvr Killing task linuxcncsvr, PID=1471 PID TTY STAT TIME COMMAND 1470 Killing redis-server Killing task redis-server, PID=1470 PID TTY STAT TIME COMMAND 1470 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 11:13:48 tormachheightgauge: exiting Z-Bot ATC : HAL component : exitedSmart Cool: HAL component : exited 2018-02-08 11:13:48 2018-02-08 11:13:48 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1442 TERM kill -TERM 1442 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1416 kill -KILL 1412 /home/operator/operator_login: line 258: 1412 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1412) - No such process kill -KILL 1412 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1412) - No such process --------------------------------------------------------------- New PathPilot start at Thu Feb 8 11:14:41 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1415 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 1 on device /dev/input/event4 key lalt is testing 1 on device /dev/input/event4 deviceresult = 1 shifttest result is 1 starting gnome-panel --------------------------------------------------------------- New PathPilot start at Thu Feb 8 11:17:35 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1437 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 11:17:40 Smart Cool: HAL component: started 2018-02-08 11:17:40 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 11:17:40 tormach_mill_5i25.hal:228: parameter or pin 'hm2_5i25.0.gpio.005.is_output' not found Shutting down and cleaning up LinuxCNC... 1496 Killing linuxcncsvr Killing task linuxcncsvr, PID=1496 PID TTY STAT TIME COMMAND 1495 Killing redis-server Killing task redis-server, PID=1495 PID TTY STAT TIME COMMAND 1495 ? Sl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 11:17:41 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-08 11:17:41 Smart Cool: HAL component : exited 2018-02-08 11:17:41 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1467 TERM kill -TERM 1467 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1441 kill -KILL 1437 /home/operator/operator_login: line 258: 1437 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1437) - No such process kill -KILL 1437 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1437) - No such process --------------------------------------------------------------- New PathPilot start at Thu Feb 8 13:55:55 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1457 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 13:56:00 Smart Cool: HAL component: started 2018-02-08 13:56:00 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 13:56:00 tormach_mill_5i25.hal:228: parameter or pin 'hm2_5i25.0.gpio.005.is_output' not found Shutting down and cleaning up LinuxCNC... 1516 Killing linuxcncsvr Killing task linuxcncsvr, PID=1516 PID TTY STAT TIME COMMAND 1515 Killing redis-server Killing task redis-server, PID=1515 PID TTY STAT TIME COMMAND 1515 ? Sl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 13:56:00 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-08 13:56:00 Smart Cool: HAL component : exited 2018-02-08 13:56:00 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1487 TERM kill -TERM 1487 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1461 kill -KILL 1457 /home/operator/operator_login: line 258: 1457 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1457) - No such process kill -KILL 1457 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1457) - No such process --------------------------------------------------------------- New PathPilot start at Thu Feb 8 13:56:51 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1458 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 1 on device /dev/input/event4 key lalt is testing 1 on device /dev/input/event4 deviceresult = 1 shifttest result is 1 starting gnome-panel --------------------------------------------------------------- New PathPilot start at Thu Feb 8 14:17:12 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1471 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 14:17:17 Smart Cool: HAL component: started 2018-02-08 14:17:17 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 14:17:17 tormach_mill_5i25.hal:241: parameter or pin 'hm2_5i25.0.gpio.001.is_output' not found Shutting down and cleaning up LinuxCNC... 1531 Killing linuxcncsvr Killing task linuxcncsvr, PID=1531 PID TTY STAT TIME COMMAND 1530 Killing redis-server Killing task redis-server, PID=1530 PID TTY STAT TIME COMMAND 1530 ? Sl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND 1530 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 14:17:17 tormachheightgauge: exiting Smart Cool: HAL component : exited 2018-02-08 14:17:17 Z-Bot ATC : HAL component : exited 2018-02-08 14:17:17 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1502 TERM kill -TERM 1502 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1475 kill -KILL 1471 /home/operator/operator_login: line 258: 1471 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1471) - No such process kill -KILL 1471 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1471) - No such process --------------------------------------------------------------- New PathPilot start at Thu Feb 8 14:19:09 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1462 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 14:19:14 Smart Cool: HAL component: started 2018-02-08 14:19:14 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 14:19:14 tormach_mill_5i25.hal:241: parameter or pin 'hm2_5i25.0.gpio.001.is_output' not found Shutting down and cleaning up LinuxCNC... 1522 Killing linuxcncsvr Killing task linuxcncsvr, PID=1522 PID TTY STAT TIME COMMAND 1521 Killing redis-server Killing task redis-server, PID=1521 PID TTY STAT TIME COMMAND 1521 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 14:19:15 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-08 14:19:15 Smart Cool: HAL component : exited 2018-02-08 14:19:15 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1493 TERM kill -TERM 1493 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1466 kill -KILL 1462 /home/operator/operator_login: line 258: 1462 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1462) - No such process kill -KILL 1462 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1462) - No such process --------------------------------------------------------------- New PathPilot start at Thu Feb 8 14:20:02 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1496 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 1 on device /dev/input/event4 key lalt is testing 1 on device /dev/input/event4 deviceresult = 1 shifttest result is 1 starting gnome-panel --------------------------------------------------------------- New PathPilot start at Thu Feb 8 14:32:47 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1460 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 14:32:52 Smart Cool: HAL component: started 2018-02-08 14:32:52 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 14:32:52 tormach_mill_5i25.hal:254: parameter or pin 'hm2_5i25.0.pwmgen.00.output-type' not found Shutting down and cleaning up LinuxCNC... 1520 Killing linuxcncsvr Killing task linuxcncsvr, PID=1520 PID TTY STAT TIME COMMAND 1519 Killing redis-server Killing task redis-server, PID=1519 PID TTY STAT TIME COMMAND 1519 ? Sl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 14:32:52 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-08 14:32:52 Smart Cool: HAL component : exited 2018-02-08 14:32:52 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1491 TERM kill -TERM 1491 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1464 kill -KILL 1460 /home/operator/operator_login: line 258: 1460 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1460) - No such process kill -KILL 1460 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1460) - No such process --------------------------------------------------------------- New PathPilot start at Thu Feb 8 14:33:49 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1499 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 14:33:54 Smart Cool: HAL component: started 2018-02-08 14:33:54 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 14:33:54 tormach_mill_5i25.hal:254: parameter or pin 'hm2_5i25.0.pwmgen.00.output-type' not found Shutting down and cleaning up LinuxCNC... 1559 Killing linuxcncsvr Killing task linuxcncsvr, PID=1559 PID TTY STAT TIME COMMAND 1558 Killing redis-server Killing task redis-server, PID=1558 PID TTY STAT TIME COMMAND 1558 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 14:33:55 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-08 14:33:55 Smart Cool: HAL component : exited 2018-02-08 14:33:55 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1530 TERM kill -TERM 1530 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1503 kill -KILL 1499 /home/operator/operator_login: line 258: 1499 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1499) - No such process kill -KILL 1499 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1499) - No such process --------------------------------------------------------------- New PathPilot start at Thu Feb 8 14:35:20 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1524 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 1 on device /dev/input/event4 key lalt is testing 1 on device /dev/input/event4 deviceresult = 1 shifttest result is 1 starting gnome-panel --------------------------------------------------------------- New PathPilot start at Thu Feb 8 14:41:02 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1496 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 14:41:07 Smart Cool: HAL component: started 2018-02-08 14:41:07 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 14:41:07 tormach_mill_5i25.hal:254: parameter or pin 'hm2_5i25.0.pwmgen.00.output-type' not found Shutting down and cleaning up LinuxCNC... 1556 Killing linuxcncsvr Killing task linuxcncsvr, PID=1556 PID TTY STAT TIME COMMAND 1555 Killing redis-server Killing task redis-server, PID=1555 PID TTY STAT TIME COMMAND 1555 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 14:41:07 tormachheightgauge: exiting Smart Cool: HAL component : exited 2018-02-08 14:41:07 Z-Bot ATC : HAL component : exited 2018-02-08 14:41:07 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1527 TERM kill -TERM 1527 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1500 kill -KILL 1496 /home/operator/operator_login: line 258: 1496 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1496) - No such process kill -KILL 1496 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1496) - No such process --------------------------------------------------------------- New PathPilot start at Thu Feb 8 17:06:08 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1435 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 1 on device /dev/input/event4 key lalt is testing 1 on device /dev/input/event4 deviceresult = 1 shifttest result is 1 starting gnome-panel --------------------------------------------------------------- New PathPilot start at Thu Feb 8 17:57:01 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1431 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 17:57:06 Smart Cool: HAL component: started 2018-02-08 17:57:06 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 17:57:06 tormach_mill_5i25.hal:254: parameter or pin 'hm2_5i25.0.pwmgen.00.output-type' not found Shutting down and cleaning up LinuxCNC... 1490 Killing linuxcncsvr Killing task linuxcncsvr, PID=1490 PID TTY STAT TIME COMMAND 1489 Killing redis-server Killing task redis-server, PID=1489 PID TTY STAT TIME COMMAND 1489 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 17:57:07 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-08 17:57:07 Smart Cool: HAL component : exited 2018-02-08 17:57:07 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1461 TERM kill -TERM 1461 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1435 kill -KILL 1431 /home/operator/operator_login: line 258: 1431 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1431) - No such process kill -KILL 1431 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1431) - No such process --------------------------------------------------------------- New PathPilot start at Thu Feb 8 18:04:22 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1432 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 1 on device /dev/input/event4 key lalt is testing 1 on device /dev/input/event4 deviceresult = 1 shifttest result is 1 starting gnome-panel --------------------------------------------------------------- New PathPilot start at Thu Feb 8 18:08:04 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1385 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 18:08:09 Smart Cool: HAL component: started 2018-02-08 18:08:09 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 18:08:09 tormach_mill_5i25.hal:254: parameter or pin 'hm2_5i25.0.pwmgen.00.output-type' not found Shutting down and cleaning up LinuxCNC... 1444 Killing linuxcncsvr Killing task linuxcncsvr, PID=1444 PID TTY STAT TIME COMMAND 1443 Killing redis-server Killing task redis-server, PID=1443 PID TTY STAT TIME COMMAND 1443 ? Sl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 18:08:09 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-08 18:08:09 Smart Cool: HAL component : exited 2018-02-08 18:08:09 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1415 TERM kill -TERM 1415 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1389 kill -KILL 1385 /home/operator/operator_login: line 258: 1385 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1385) - No such process kill -KILL 1385 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1385) - No such process Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found starting gnome-panel --------------------------------------------------------------- New PathPilot start at Thu Feb 8 20:21:46 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1460 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 20:21:50 Smart Cool: HAL component: started 2018-02-08 20:21:50 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 20:21:51 tormach_mill_5i25.hal:286: Pin 'hm2_5i25.0.7i76.0.0.input-12-not' does not exist Shutting down and cleaning up LinuxCNC... 1521 Killing linuxcncsvr Killing task linuxcncsvr, PID=1521 PID TTY STAT TIME COMMAND 1520 Killing redis-server Killing task redis-server, PID=1520 PID TTY STAT TIME COMMAND 1520 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 20:21:51 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-08 20:21:51 Smart Cool: HAL component : exited 2018-02-08 20:21:51 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1490 TERM kill -TERM 1490 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1464 kill -KILL 1460 /home/operator/operator_login: line 258: 1460 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1460) - No such process kill -KILL 1460 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1460) - No such process Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found starting gnome-panel --------------------------------------------------------------- New PathPilot start at Thu Feb 8 21:24:43 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1475 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 21:24:48 Smart Cool: HAL component: started 2018-02-08 21:24:48 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 21:24:48 Starting TASK program: milltask task pid=1600 Starting DISPLAY program: /home/operator/tmc/python/tormach_mill_ui.py emcTaskInit: using builtin interpreter shuttlexpress4: found 'Contour Design ShuttleXpress' on device '/dev/hidraw3' UI version: v1.9.13 spindle type: 0 Retrieval of MDI history failed. no enc_door_open_max_rpm found in redis defaulting to 1000 enclosure door open max rpm: 1000 screen resolution is now 1024 x 768 caught attempt to change outside restricted directory: /home/operator/gcode forcing current directory to /media LinuxCNC status.task_mode change was unknown is now MODE_MANUAL LinuxCNC interp_state change was unknown is now INTERP_IDLE Hiding image specified with M01 status.task_state was unknown is now STATE_ESTOP reset button was pressed at 2018-02-08 21:24:54 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. Switched to notebook page: MILL_STATUS_PAGE exit button was pressed at 2018-02-08 21:24:56 CPU usage was 0.0, is now 22.3 CPU usage was 22.3, is now 4.0 Shutting down and cleaning up LinuxCNC... 1536 Killing linuxcncsvr Killing task linuxcncsvr, PID=1536 PID TTY STAT TIME COMMAND 1600 Killing milltask Killing task milltask, PID=1600 Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 calling previous SIGTERM handler PID TTY STAT TIME COMMAND 1600 ? D 0:00 milltask -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PID TTY STAT TIME COMMAND 1535 Killing redis-server Killing task redis-server, PID=1535 PID TTY STAT TIME COMMAND 1535 ? Sl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 21:24:58 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-08 21:24:58 shuttlexpress4: exiting Smart Cool: HAL component : exited 2018-02-08 21:24:58 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done /home/operator/operator_login: line 877: 1505 Killed "$SPLASH_PROGRAM" 2 UI exit code: 0 UI exited OK File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1479 kill -KILL 1475 /home/operator/operator_login: line 258: 1475 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found starting gnome-panel The application 'gnome-panel' lost its connection to the display :0.0; most likely the X server was shut down or you killed/destroyed the application. --------------------------------------------------------------- New PathPilot start at Thu Feb 8 23:01:54 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1439 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 23:01:59 Smart Cool: HAL component: started 2018-02-08 23:01:59 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 23:01:59 tormach_mill_5i25.hal:287: Pin 'hm2_5i25.0.7i76.0.0.input-12' does not exist Shutting down and cleaning up LinuxCNC... 1500 Killing linuxcncsvr Killing task linuxcncsvr, PID=1500 PID TTY STAT TIME COMMAND 1499 Killing redis-server Killing task redis-server, PID=1499 PID TTY STAT TIME COMMAND 1499 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 23:01:59 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-08 23:01:59 Smart Cool: HAL component : exited 2018-02-08 23:01:59 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1469 TERM kill -TERM 1469 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1443 kill -KILL 1439 /home/operator/operator_login: line 258: 1439 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1439) - No such process kill -KILL 1439 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1439) - No such process Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found starting gnome-panel --------------------------------------------------------------- New PathPilot start at Thu Feb 8 23:04:13 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1438 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 23:04:18 Smart Cool: HAL component: started 2018-02-08 23:04:18 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 23:04:18 Starting TASK program: milltask task pid=1567 Starting DISPLAY program: /home/operator/tmc/python/tormach_mill_ui.py emcTaskInit: using builtin interpreter shuttlexpress4: found 'Contour Design ShuttleXpress' on device '/dev/hidraw3' UI version: v1.9.13 spindle type: 0 no enc_door_open_max_rpm found in redis defaulting to 1000 enclosure door open max rpm: 1000 screen resolution is now 1024 x 768 caught attempt to change outside restricted directory: /home/operator/gcode forcing current directory to /media LinuxCNC status.task_mode change was unknown is now MODE_MANUAL LinuxCNC interp_state change was unknown is now INTERP_IDLE Hiding image specified with M01 status.task_state was unknown is now STATE_ESTOP reset button was pressed at 2018-02-08 23:04:23 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. Switched to notebook page: MILL_STATUS_PAGE Machine has been estopped. Restore power to machine and click Reset button to continue. Switched to notebook page: MAIN_PAGE ADMIN HALMETER Switched to notebook page: PROBE_PAGE Switched to notebook page: CONVERSATIONAL_PAGE Switched to notebook page: OFFSETS_PAGE Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on Switched to notebook page: MILL_STATUS_PAGE command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on Switched to notebook page: OFFSETS_PAGE command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on Switched to notebook page: MILL_STATUS_PAGE command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on LinuxCNC status.task_mode change was MODE_MANUAL is now MODE_MDI CPU usage was 0.0, is now 28.0 command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on command (EMC_TASK_PLAN_EXECUTE) cannot be executed until the machine is out of E-stop and turned on CPU usage was 28.0, is now 13.9 CPU usage was 13.9, is now 2.0 Switched to notebook page: SETTINGS_PAGE enable home axis 0, flag 0 enable home axis 1, flag 0 enable home axis 2, flag 0 enable home axis 0, flag 1 enable home axis 1, flag 1 enable home axis 2, flag 1 Switched to notebook page: FILE_PAGE CPU usage was 2.0, is now 0.0 Switched to notebook page: MAIN_PAGE ADMIN HALMETER ADMIN HALMETER Must take machine out of estop before jogging Switched to notebook page: MILL_STATUS_PAGE Switched to notebook page: MAIN_PAGE Must take machine out of estop before jogging Switched to notebook page: MILL_STATUS_PAGE Switched to notebook page: MAIN_PAGE ADMIN HALSCOPE halscope: config file 'autosave.halscope' could not be opened CPU usage was 0.0, is now 17.0 CPU usage was 17.0, is now 4.0 CPU usage was 4.0, is now 21.5 CPU usage was 21.5, is now 5.9 CPU usage was 5.9, is now 2.0 reset button was pressed at 2018-02-08 23:09:51 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. Switched to notebook page: MILL_STATUS_PAGE Machine has been estopped. Restore power to machine and click Reset button to continue. ensure_mode: changing LCNC mode to MODE_MANUAL LinuxCNC status.task_mode change was MODE_MDI is now MODE_MANUAL Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging CPU usage was 2.0, is now 0.0 Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging Must take machine out of estop before jogging clear button was pressed at 2018-02-08 23:10:25 reset button was pressed at 2018-02-08 23:10:29 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. Machine has been estopped. Restore power to machine and click Reset button to continue. exit button was pressed at 2018-02-08 23:10:30 CPU usage was 0.0, is now 18.9 CPU usage was 18.9, is now 8.0 Shutting down and cleaning up LinuxCNC... 1501 Killing linuxcncsvr Killing task linuxcncsvr, PID=1501 PID TTY STAT TIME COMMAND 1567 Killing milltask Killing task milltask, PID=1567 calling previous SIGTERM handler PID TTY STAT TIME COMMAND 1567 ? D 0:00 milltask -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PID TTY STAT TIME COMMAND 1500 Killing redis-server Killing task redis-server, PID=1500 PID TTY STAT TIME COMMAND 1500 ? Sl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 23:10:32 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-08 23:10:32 Smart Cool: HAL component : exited 2018-02-08 23:10:32 shuttlexpress4: exiting Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done /home/operator/operator_login: line 877: 1470 Killed "$SPLASH_PROGRAM" 2 UI exit code: 0 UI exited OK File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1442 kill -KILL 1438 /home/operator/operator_login: line 258: 1438 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found starting gnome-panel --------------------------------------------------------------- New PathPilot start at Thu Feb 8 23:42:38 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1434 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-08 23:42:43 Smart Cool: HAL component: started 2018-02-08 23:42:43 tormachheightgauge: starting USBIO : HAL component starting 2018-02-08 23:42:43 Starting TASK program: milltask task pid=1561 Starting DISPLAY program: /home/operator/tmc/python/tormach_mill_ui.py emcTaskInit: using builtin interpreter shuttlexpress4: found 'Contour Design ShuttleXpress' on device '/dev/hidraw3' UI version: v1.9.13 spindle type: 0 no enc_door_open_max_rpm found in redis defaulting to 1000 enclosure door open max rpm: 1000 screen resolution is now 1024 x 768 caught attempt to change outside restricted directory: /home/operator/gcode forcing current directory to /media LinuxCNC status.task_mode change was unknown is now MODE_MANUAL LinuxCNC interp_state change was unknown is now INTERP_IDLE Hiding image specified with M01 status.task_state was unknown is now STATE_ESTOP exit button was pressed at 2018-02-08 23:42:47 CPU usage was 0.0, is now 23.3 CPU usage was 23.3, is now 4.0 Shutting down and cleaning up LinuxCNC... 1495 Killing linuxcncsvr Killing task linuxcncsvr, PID=1495 PID TTY STAT TIME COMMAND 1561 Killing milltask Killing task milltask, PID=1561 Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 calling previous SIGTERM handler PID TTY STAT TIME COMMAND 1561 ? D 0:00 milltask -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PID TTY STAT TIME COMMAND 1494 Killing redis-server Killing task redis-server, PID=1494 PID TTY STAT TIME COMMAND 1494 ? Sl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-08 23:42:49 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-08 23:42:49 Smart Cool: HAL component : exited 2018-02-08 23:42:49 shuttlexpress4: exiting Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done /home/operator/operator_login: line 877: 1464 Killed "$SPLASH_PROGRAM" 2 UI exit code: 0 UI exited OK File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1438 kill -KILL 1434 /home/operator/operator_login: line 258: 1434 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event4 on device /dev/input/event4 key lshift is testing 0 on device /dev/input/event4 key lalt is testing 0 on device /dev/input/event4 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found starting gnome-panel The application 'gnome-panel' lost its connection to the display :0.0; most likely the X server was shut down or you killed/destroyed the application. --------------------------------------------------------------- New PathPilot start at Fri Feb 9 11:50:38 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1437 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event3 on device /dev/input/event3 key lshift is testing 0 on device /dev/input/event3 key lalt is testing 0 on device /dev/input/event3 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-09 11:50:43 Smart Cool: HAL component: started 2018-02-09 11:50:43 tormachheightgauge: starting USBIO : HAL component starting 2018-02-09 11:50:43 Starting TASK program: milltask task pid=1562 Starting DISPLAY program: /home/operator/tmc/python/tormach_mill_ui.py emcTaskInit: using builtin interpreter shuttlexpress4: found 'Contour Design ShuttleXpress' on device '/dev/hidraw2' UI version: v1.9.13 spindle type: 0 no enc_door_open_max_rpm found in redis defaulting to 1000 enclosure door open max rpm: 1000 screen resolution is now 1024 x 768 caught attempt to change outside restricted directory: /home/operator/gcode forcing current directory to /media LinuxCNC status.task_mode change was unknown is now MODE_MANUAL LinuxCNC interp_state change was unknown is now INTERP_IDLE Hiding image specified with M01 status.task_state was unknown is now STATE_ESTOP ADMIN HALMETER reset button was pressed at 2018-02-09 11:51:46 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. Switched to notebook page: MILL_STATUS_PAGE Machine has been estopped. Restore power to machine and click Reset button to continue. clear button was pressed at 2018-02-09 11:51:52 Switched to notebook page: SETTINGS_PAGE enable home axis 0, flag 0 enable home axis 1, flag 0 enable home axis 2, flag 0 reset button was pressed at 2018-02-09 11:52:07 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. Switched to notebook page: MILL_STATUS_PAGE Machine has been estopped. Restore power to machine and click Reset button to continue. reset button was pressed at 2018-02-09 11:52:08 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. Machine has been estopped. Restore power to machine and click Reset button to continue. Switched to notebook page: SETTINGS_PAGE Switched to notebook page: FILE_PAGE Switched to notebook page: MAIN_PAGE reset button was pressed at 2018-02-09 11:52:31 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. Switched to notebook page: MILL_STATUS_PAGE Machine has been estopped. Restore power to machine and click Reset button to continue. cycle_start button was pressed at 2018-02-09 11:52:32 reset button was pressed at 2018-02-09 11:52:34 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. Machine has been estopped. Restore power to machine and click Reset button to continue. exit button was pressed at 2018-02-09 11:52:37 CPU usage was 0.0, is now 24.0 CPU usage was 24.0, is now 6.0 Shutting down and cleaning up LinuxCNC... 1498 Killing linuxcncsvr Killing task linuxcncsvr, PID=1498 PID TTY STAT TIME COMMAND 1562 Killing milltask Killing task milltask, PID=1562 Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 calling previous SIGTERM handler PID TTY STAT TIME COMMAND 1562 ? D 0:00 milltask -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PID TTY STAT TIME COMMAND 1497 Killing redis-server Killing task redis-server, PID=1497 PID TTY STAT TIME COMMAND 1497 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-09 11:52:40 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-09 11:52:40 shuttlexpress4: exiting Smart Cool: HAL component : exited 2018-02-09 11:52:40 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done /home/operator/operator_login: line 877: 1467 Killed "$SPLASH_PROGRAM" 2 UI exit code: 0 UI exited OK File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1441 kill -KILL 1437 /home/operator/operator_login: line 258: 1437 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event3 on device /dev/input/event3 key lshift is testing 0 on device /dev/input/event3 key lalt is testing 0 on device /dev/input/event3 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found starting gnome-panel --------------------------------------------------------------- New PathPilot start at Fri Feb 9 11:31:17 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1512 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event5 on device /dev/input/event5 key lshift is testing 0 on device /dev/input/event5 key lalt is testing 0 on device /dev/input/event5 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-09 11:31:22 Smart Cool: HAL component: started 2018-02-09 11:31:22 tormachheightgauge: starting USBIO : HAL component starting 2018-02-09 11:31:22 Starting TASK program: milltask task pid=1639 Starting DISPLAY program: /home/operator/tmc/python/tormach_mill_ui.py emcTaskInit: using builtin interpreter shuttlexpress4: found 'Contour Design ShuttleXpress' on device '/dev/hidraw1' UI version: v1.9.13 spindle type: 0 enable home axis 0, flag 0 enable home axis 1, flag 0 enable home axis 2, flag 0 no enc_door_open_max_rpm found in redis defaulting to 1000 enclosure door open max rpm: 1000 screen resolution is now 1024 x 768 caught attempt to change outside restricted directory: /home/operator/gcode forcing current directory to /media LinuxCNC status.task_mode change was unknown is now MODE_MANUAL LinuxCNC interp_state change was unknown is now INTERP_IDLE Hiding image specified with M01 status.task_state was unknown is now STATE_ESTOP reset button was pressed at 2018-02-09 11:31:46 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. Switched to notebook page: MILL_STATUS_PAGE Machine has been estopped. Restore power to machine and click Reset button to continue. exit button was pressed at 2018-02-09 11:31:50 CPU usage was 0.0, is now 21.3 CPU usage was 21.3, is now 6.0 CPU usage was 6.0, is now 2.0 Shutting down and cleaning up LinuxCNC... 1573 Killing linuxcncsvr Killing task linuxcncsvr, PID=1573 PID TTY STAT TIME COMMAND 1639 Killing milltask Killing task milltask, PID=1639 Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 calling previous SIGTERM handler PID TTY STAT TIME COMMAND 1639 ? D 0:00 milltask -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PID TTY STAT TIME COMMAND 1572 Killing redis-server Killing task redis-server, PID=1572 PID TTY STAT TIME COMMAND 1572 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-09 11:31:54 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-09 11:31:54 shuttlexpress4: exiting Smart Cool: HAL component : exited 2018-02-09 11:31:54 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done /home/operator/operator_login: line 877: 1542 Killed "$SPLASH_PROGRAM" 2 UI exit code: 0 UI exited OK File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1516 kill -KILL 1512 /home/operator/operator_login: line 258: 1512 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event5 on device /dev/input/event5 key lshift is testing 0 on device /dev/input/event5 key lalt is testing 0 on device /dev/input/event5 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found starting gnome-panel gnome-panel: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0. gnome-terminal: ../../src/xcb_io.c:386: _XAllocID: Assertion `ret != inval_id' failed. --------------------------------------------------------------- New PathPilot start at Fri Feb 9 16:02:20 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1482 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event5 on device /dev/input/event5 key lshift is testing 0 on device /dev/input/event5 key lalt is testing 0 on device /dev/input/event5 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-09 16:02:25 Smart Cool: HAL component: started 2018-02-09 16:02:25 tormachheightgauge: starting USBIO : HAL component starting 2018-02-09 16:02:26 tormach_mill_5i25.hal:283: Pin 'machine-ok-db.out' does not exist Shutting down and cleaning up LinuxCNC... 1558 Killing linuxcncsvr Killing task linuxcncsvr, PID=1558 PID TTY STAT TIME COMMAND 1557 Killing redis-server Killing task redis-server, PID=1557 PID TTY STAT TIME COMMAND 1557 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-09 16:02:26 tormachheightgauge: exiting Smart Cool: HAL component : exited 2018-02-09 16:02:26 Z-Bot ATC : HAL component : exited 2018-02-09 16:02:26 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1527 TERM kill -TERM 1527 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1486 kill -KILL 1482 /home/operator/operator_login: line 258: 1482 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event5 on device /dev/input/event5 key lshift is testing 0 on device /dev/input/event5 key lalt is testing 0 on device /dev/input/event5 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1482) - No such process kill -KILL 1482 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1482) - No such process Keyboard event is /dev/input/event5 on device /dev/input/event5 key lshift is testing 0 on device /dev/input/event5 key lalt is testing 0 on device /dev/input/event5 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found starting gnome-panel The application 'gnome-panel' lost its connection to the display :0.0; most likely the X server was shut down or you killed/destroyed the application. --------------------------------------------------------------- New PathPilot start at Fri Feb 9 16:24:33 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1498 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event5 on device /dev/input/event5 key lshift is testing 0 on device /dev/input/event5 key lalt is testing 0 on device /dev/input/event5 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-09 16:24:39 Smart Cool: HAL component: started 2018-02-09 16:24:39 tormachheightgauge: starting USBIO : HAL component starting 2018-02-09 16:24:39 tormach_mill_5i25.hal:283: Pin 'machine-ok-db.in' does not exist Shutting down and cleaning up LinuxCNC... 1597 Killing linuxcncsvr Killing task linuxcncsvr, PID=1597 PID TTY STAT TIME COMMAND 1596 Killing redis-server Killing task redis-server, PID=1596 PID TTY STAT TIME COMMAND 1596 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-09 16:24:39 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-09 16:24:39 Smart Cool: HAL component : exited 2018-02-09 16:24:39 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done UI exit code: 255 bad exit code killing SPLASH killtree.sh 1560 TERM kill -TERM 1560 Found program dir from tmp folder: /home/operator/tmc/python setting restricted directory to: /home/operator/gcode set_current_directory(): /home/operator/gcode setting restricted directory to: /home/operator/updates set_current_directory(): /home/operator/updates popup current folder changed has changed to: /home/operator/updates File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1502 kill -KILL 1498 /home/operator/operator_login: line 258: 1498 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event5 on device /dev/input/event5 key lshift is testing 0 on device /dev/input/event5 key lalt is testing 0 on device /dev/input/event5 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses /home/operator/tmc/scripts/killtree.sh: line 6: kill: (1498) - No such process kill -KILL 1498 /home/operator/tmc/scripts/killtree.sh: line 11: kill: (1498) - No such process Keyboard event is /dev/input/event5 on device /dev/input/event5 key lshift is testing 0 on device /dev/input/event5 key lalt is testing 0 on device /dev/input/event5 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found starting gnome-panel --------------------------------------------------------------- New PathPilot start at Fri Feb 9 17:37:39 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1421 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event3 on device /dev/input/event3 key lshift is testing 0 on device /dev/input/event3 key lalt is testing 0 on device /dev/input/event3 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-09 17:37:44 Smart Cool: HAL component: started 2018-02-09 17:37:44 tormachheightgauge: starting USBIO : HAL component starting 2018-02-09 17:37:44 Starting TASK program: milltask task pid=1547 Starting DISPLAY program: /home/operator/tmc/python/tormach_mill_ui.py emcTaskInit: using builtin interpreter shuttlexpress4: found 'Contour Design ShuttleXpress' on device '/dev/hidraw2' UI version: v1.9.13 spindle type: 0 enable home axis 0, flag 0 enable home axis 1, flag 0 enable home axis 2, flag 0 no enc_door_open_max_rpm found in redis defaulting to 1000 enclosure door open max rpm: 1000 screen resolution is now 1024 x 768 caught attempt to change outside restricted directory: /home/operator/gcode forcing current directory to /media LinuxCNC status.task_mode change was unknown is now MODE_MANUAL LinuxCNC interp_state change was unknown is now INTERP_IDLE Hiding image specified with M01 status.task_state was unknown is now STATE_ESTOP exit button was pressed at 2018-02-09 17:37:51 CPU usage was 0.0, is now 26.5 CPU usage was 26.5, is now 4.0 Shutting down and cleaning up LinuxCNC... 1482 Killing linuxcncsvr Killing task linuxcncsvr, PID=1482 PID TTY STAT TIME COMMAND 1547 Killing milltask Killing task milltask, PID=1547 Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 calling previous SIGTERM handler PID TTY STAT TIME COMMAND 1547 ? D 0:00 milltask -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PID TTY STAT TIME COMMAND 1481 Killing redis-server Killing task redis-server, PID=1481 PID TTY STAT TIME COMMAND 1481 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-09 17:37:53 tormachheightgauge: exiting Smart Cool: HAL component : exited 2018-02-09 17:37:53 shuttlexpress4: exiting Z-Bot ATC : HAL component : exited 2018-02-09 17:37:53 Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done /home/operator/operator_login: line 877: 1451 Killed "$SPLASH_PROGRAM" 2 UI exit code: 0 UI exited OK File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1425 kill -KILL 1421 /home/operator/operator_login: line 258: 1421 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event3 on device /dev/input/event3 key lshift is testing 0 on device /dev/input/event3 key lalt is testing 0 on device /dev/input/event3 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found starting gnome-panel --------------------------------------------------------------- New PathPilot start at Fri Feb 9 18:10:29 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1429 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event3 on device /dev/input/event3 key lshift is testing 0 on device /dev/input/event3 key lalt is testing 0 on device /dev/input/event3 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-09 18:10:34 Smart Cool: HAL component: started 2018-02-09 18:10:35 tormachheightgauge: starting USBIO : HAL component starting 2018-02-09 18:10:35 Starting TASK program: milltask task pid=1558 Starting DISPLAY program: /home/operator/tmc/python/tormach_mill_ui.py emcTaskInit: using builtin interpreter shuttlexpress4: found 'Contour Design ShuttleXpress' on device '/dev/hidraw2' UI version: v1.9.13 spindle type: 0 enable home axis 0, flag 0 enable home axis 1, flag 0 enable home axis 2, flag 0 no enc_door_open_max_rpm found in redis defaulting to 1000 enclosure door open max rpm: 1000 screen resolution is now 1024 x 768 caught attempt to change outside restricted directory: /home/operator/gcode forcing current directory to /media LinuxCNC status.task_mode change was unknown is now MODE_MANUAL LinuxCNC interp_state change was unknown is now INTERP_IDLE Hiding image specified with M01 status.task_state was unknown is now STATE_ESTOP reset button was pressed at 2018-02-09 18:10:41 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. Switched to notebook page: MILL_STATUS_PAGE reset button was pressed at 2018-02-09 18:10:48 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. reset button was pressed at 2018-02-09 18:11:05 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. reset button was pressed at 2018-02-09 18:11:06 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. clear button was pressed at 2018-02-09 18:11:09 reset button was pressed at 2018-02-09 18:11:12 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. reset button was pressed at 2018-02-09 18:11:52 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. reset button was pressed at 2018-02-09 18:11:53 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. exit button was pressed at 2018-02-09 18:16:47 CPU usage was 0.0, is now 25.3 CPU usage was 25.3, is now 2.0 Shutting down and cleaning up LinuxCNC... 1492 Killing linuxcncsvr Killing task linuxcncsvr, PID=1492 PID TTY STAT TIME COMMAND 1558 Killing milltask Killing task milltask, PID=1558 Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 calling previous SIGTERM handler PID TTY STAT TIME COMMAND 1558 ? D 0:00 milltask -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PID TTY STAT TIME COMMAND 1491 Killing redis-server Killing task redis-server, PID=1491 PID TTY STAT TIME COMMAND 1491 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-09 18:16:48 tormachheightgauge: exiting Z-Bot ATC : HAL component : exited 2018-02-09 18:16:48 Smart Cool: HAL component : exited 2018-02-09 18:16:48 shuttlexpress4: exiting Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done /home/operator/operator_login: line 877: 1461 Killed "$SPLASH_PROGRAM" 2 UI exit code: 0 UI exited OK File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1433 kill -KILL 1429 /home/operator/operator_login: line 258: 1429 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event3 on device /dev/input/event3 key lshift is testing 0 on device /dev/input/event3 key lalt is testing 0 on device /dev/input/event3 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found starting gnome-panel --------------------------------------------------------------- New PathPilot start at Fri Feb 9 21:15:36 CST 2018 --------------------------------------------------------------- sourcing /home/operator/tmc/scripts/rip-environment.sh /home/operator/tmc Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc EMC2_HOME: /home/operator/tmc new PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games new LD_LIBRARY_PATH: /home/operator/tmc/lib new PYTHONPATH: /home/operator/tmc/python/scanner:/home/operator/tmc/python:/home/operator/tmc/python/config_picker:/home/operator/tmc/lib/python:/home/operator/tmc/python/scanner2 Temporary directory for linuxcnc: /tmp/linuxcnc RIP environment setup complete... setting touchscreen calibration No calibration file found: /home/operator/gcode/pointercal.xinput starting log rotator logrotator.sh 3600 /home/operator/gcode/logfiles/logrotate.conf /home/operator/gcode/logfiles/logrotate.status LOGROTATOR_PID: 1437 logrotate /home/operator/gcode/logfiles/logrotate.conf -s /home/operator/gcode/logfiles/logrotate.status gnome-power-manager already running Keyboard event is /dev/input/event3 on device /dev/input/event3 key lshift is testing 0 on device /dev/input/event3 key lalt is testing 0 on device /dev/input/event3 deviceresult = 0 shifttest result is 0 HAVE_GNOME: 1 File /home/operator/update_file.txt not found. No software update to perform. INI file: ~/tmc/configs/tormach_mill/tormach_1100-3.ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini [HOSTMOT2] BITFILE0 = 'mesa/5i25_7i76x2.bit' [HOSTMOT2] BITFILE0 = /home/operator/tmc/mesa/5i25_7i76x2.bit lspci -n -d 2718:5125: 10:00.0 1100: 2718:5125 (rev 01) /home/operator/tmc/bin/mesaflash: root4755 linuxcnc ~/tmc/configs/tormach_mill/tormach_1100-3.ini Setting enviroment to run Tormach LinuxCNC to run-in-place for development Using command line supplied EMC2_HOME: /home/operator/tmc EMC2_HOME = /home/operator/tmc, absolute path for /home/operator/tmc PATH: /home/operator/tmc/python:/home/operator/tmc/bin:/home/operator/tmc/scripts:/home/operator/tmc/bin:/home/operator/teamviewer9qs:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games This script only needs to be run once per shell session. prefix: /home/operator/tmc exec_prefix: /home/operator/tmc EMC2_BIN_DIR=/home/operator/tmc/bin EMC2_RTLIB_DIR=/home/operator/tmc/rtlib INIFILE: ~/tmc/configs/tormach_mill/tormach_1100-3.ini ~/tmc/configs/tormach_mill/tormach_1100-3.ini started with tilde expanded INIFILE: /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini EXTRA_ARGS: RUN_IN_PLACE=yes LINUXCNC_DIR= LINUXCNC_BIN_DIR=/home/operator/tmc/bin LINUXCNC_RTLIB_DIR=/home/operator/tmc/rtlib INIVAR=inivar HALCMD=halcmd LINUXCNC - 2.6.0~pre inserted into PYTHONPATH: /home/operator/tmc/configs/tormach_mill/python Machine configuration directory is '/home/operator/tmc/configs/tormach_mill' Machine configuration file is 'tormach_1100-3.ini' INIFILE=/home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PARAMETER_FILE=~/mill_data/emc.var Can not find -sec MOT -var MOT -num 1 Can not find -sec IO -var IO -num 1 TASK=milltask HALUI=halui DISPLAY=tormach_mill_ui.py EMCDISPLAY_FULLPATH: /home/operator/tmc/python/tormach_mill_ui.py EMCDISPLAY_DIR: /home/operator/tmc/python inserted into PYTHONPATH: /home/operator/tmc/python NML_FILE: /home/operator/tmc/configs/common/linuxcnc.nml User's HOME directory: /home/operator /home/operator/tmc/scripts/check_mill_tool_table.py: tool file is /home/operator/mill_data/tool.tbl scanning mill tool table tool table is already up to date Can not find -sec REDIS -var DISABLE_SERVER -num 1 DISABLE_SERVER= Can not find -sec REDIS -var SERVER_PATH -num 1 SERVER_PATH= SERVER_ARGS=--dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir ~/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 REDIS_SERVER_ARGS: --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 Can not find -sec REDIS -var SERVER_LOG -num 1 SERVER_LOG= Starting LinuxCNC... Starting redis server program: redis server started as: 'redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000', logging to: /dev/null Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Starting LinuxCNC IO program: io io started halcmd loadusr io started Starting HAL User Interface program: halui halcmd loadusr -Wn halui halui -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini Z-Bot ATC : HAL component : started 2018-02-09 21:15:41 Smart Cool: HAL component: started 2018-02-09 21:15:41 tormachheightgauge: starting USBIO : HAL component starting 2018-02-09 21:15:41 Starting TASK program: milltask task pid=1564 Starting DISPLAY program: /home/operator/tmc/python/tormach_mill_ui.py emcTaskInit: using builtin interpreter shuttlexpress4: found 'Contour Design ShuttleXpress' on device '/dev/hidraw2' UI version: v1.9.13 spindle type: 0 enable home axis 0, flag 0 enable home axis 1, flag 0 enable home axis 2, flag 0 no enc_door_open_max_rpm found in redis defaulting to 1000 enclosure door open max rpm: 1000 screen resolution is now 1024 x 768 caught attempt to change outside restricted directory: /home/operator/gcode forcing current directory to /media LinuxCNC status.task_mode change was unknown is now MODE_MANUAL LinuxCNC interp_state change was unknown is now INTERP_IDLE Hiding image specified with M01 status.task_state was unknown is now STATE_ESTOP reset button was pressed at 2018-02-09 21:16:58 Failed to bring machine out of E-stop. Please check machine power or DB-25 communication cable from the controller to the machine. Switched to notebook page: MILL_STATUS_PAGE Machine has been estopped. Restore power to machine and click Reset button to continue. exit button was pressed at 2018-02-09 21:17:00 CPU usage was 0.0, is now 23.2 CPU usage was 23.2, is now 6.0 CPU usage was 6.0, is now 2.0 USB device (USB_DISK) was plugged in. 2018-02-09 21:17:03 Shutting down and cleaning up LinuxCNC... 1498 Killing linuxcncsvr Killing task linuxcncsvr, PID=1498 PID TTY STAT TIME COMMAND 1564 Killing milltask Killing task milltask, PID=1564 Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 Setting tolerance to 0.000000 Setting tolerance to 0.050800 Setting naivecam tolerance to 0.000000 calling previous SIGTERM handler PID TTY STAT TIME COMMAND 1564 ? D 0:00 milltask -ini /home/operator/tmc/configs/tormach_mill/tormach_1100-3.ini PID TTY STAT TIME COMMAND 1497 Killing redis-server Killing task redis-server, PID=1497 PID TTY STAT TIME COMMAND 1497 ? Dl 0:00 redis-server --dir /home/operator/mill_data --dbfilename dump.rdb --save 3600 1 --save 300 100 --save 60 10000 PID TTY STAT TIME COMMAND Stopping realtime threads halcmd stop Unloading hal components halcmd unload all usbio : exiting 2018-02-09 21:17:06 tormachheightgauge: exiting Smart Cool: HAL component : exited 2018-02-09 21:17:06 Z-Bot ATC : HAL component : exited 2018-02-09 21:17:06 shuttlexpress4: exiting Removing HAL_LIB, RTAPI, and Real Time OS modules /home/operator/tmc/scripts/realtime stop module helper '/home/operator/tmc/bin/linuxcnc_module_helper' found. Removing NML shared memory segments rm /tmp/linuxcnc.lock Cleanup done /home/operator/operator_login: line 877: 1467 Killed "$SPLASH_PROGRAM" 2 UI exit code: 0 UI exited OK File /home/operator/update_file.txt not found. No software update to perform. terminating log rotator and subprocesses kill -KILL 1441 kill -KILL 1437 /home/operator/operator_login: line 258: 1437 Killed logrotator.sh $LOGROTATE_SLEEP "$LOGROTATE_CONF" "$LOGROTATE_STATUS" Keyboard event is /dev/input/event3 on device /dev/input/event3 key lshift is testing 0 on device /dev/input/event3 key lalt is testing 0 on device /dev/input/event3 deviceresult = 0 shifttest result is 0 /home/operator/operator_login: line 270: -H: command not found starting gnome-panel