Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.2 Machine configuration directory is '/home/mjg/linuxcnc/configs/MJG_CNC' Machine configuration file is 'MJG_CNC.ini' INIFILE=/home/mjg/linuxcnc/configs/MJG_CNC/MJG_CNC.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TPMOD= HOMEMOD= TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Found file(REL): ./MJG_CNC.hal Found file(REL): ./custom.hal Found file(REL): ./xhc-whb04b-6.hal Starting TASK program: milltask Starting DISPLAY program: axis emc/task/emctaskmain.cc 3084: can't initialize interpreter waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> waiting for s.joints<0>, s.kinematics_type<0> Shutting down and cleaning up LinuxCNC... Running HAL shutdown script hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:10:42:5d hm2_eth: discovered 7I76E-16 hm2/hm2_7i76e.0: Low Level init 0.15 hm2/hm2_7i76e.0: Smart Serial Firmware Version 43 Board hm2_7i76e.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_7i76e.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_7i76e.0: 51 I/O Pins used: hm2/hm2_7i76e.0: IO Pin 000 (P1-01): StepGen #0, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 001 (P1-14): StepGen #0, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 002 (P1-02): StepGen #1, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 003 (P1-15): StepGen #1, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 004 (P1-03): StepGen #2, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 005 (P1-16): StepGen #2, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 006 (P1-04): IOPort hm2/hm2_7i76e.0: IO Pin 007 (P1-17): IOPort hm2/hm2_7i76e.0: IO Pin 008 (P1-05): IOPort hm2/hm2_7i76e.0: IO Pin 009 (P1-06): IOPort hm2/hm2_7i76e.0: IO Pin 010 (P1-07): Smart Serial Interface #0, pin tx0 (Output) hm2/hm2_7i76e.0: IO Pin 011 (P1-08): Smart Serial Interface #0, pin rx0 (Input) hm2/hm2_7i76e.0: IO Pin 012 (P1-09): IOPort hm2/hm2_7i76e.0: IO Pin 013 (P1-10): IOPort hm2/hm2_7i76e.0: IO Pin 014 (P1-11): IOPort hm2/hm2_7i76e.0: IO Pin 015 (P1-12): IOPort hm2/hm2_7i76e.0: IO Pin 016 (P1-13): IOPort hm2/hm2_7i76e.0: IO Pin 017 (P2-01): IOPort hm2/hm2_7i76e.0: IO Pin 018 (P2-14): IOPort hm2/hm2_7i76e.0: IO Pin 019 (P2-02): IOPort hm2/hm2_7i76e.0: IO Pin 020 (P2-15): IOPort hm2/hm2_7i76e.0: IO Pin 021 (P2-03): IOPort hm2/hm2_7i76e.0: IO Pin 022 (P2-16): IOPort hm2/hm2_7i76e.0: IO Pin 023 (P2-04): IOPort hm2/hm2_7i76e.0: IO Pin 024 (P2-17): IOPort hm2/hm2_7i76e.0: IO Pin 025 (P2-05): IOPort hm2/hm2_7i76e.0: IO Pin 026 (P2-06): IOPort hm2/hm2_7i76e.0: IO Pin 027 (P2-07): IOPort hm2/hm2_7i76e.0: IO Pin 028 (P2-08): IOPort hm2/hm2_7i76e.0: IO Pin 029 (P2-09): IOPort hm2/hm2_7i76e.0: IO Pin 030 (P2-10): IOPort hm2/hm2_7i76e.0: IO Pin 031 (P2-11): IOPort hm2/hm2_7i76e.0: IO Pin 032 (P2-12): IOPort hm2/hm2_7i76e.0: IO Pin 033 (P2-13): IOPort hm2/hm2_7i76e.0: IO Pin 034 (P3-01): IOPort hm2/hm2_7i76e.0: IO Pin 035 (P3-14): IOPort hm2/hm2_7i76e.0: IO Pin 036 (P3-02): IOPort hm2/hm2_7i76e.0: IO Pin 037 (P3-15): IOPort hm2/hm2_7i76e.0: IO Pin 038 (P3-03): IOPort hm2/hm2_7i76e.0: IO Pin 039 (P3-16): IOPort hm2/hm2_7i76e.0: IO Pin 040 (P3-04): IOPort hm2/hm2_7i76e.0: IO Pin 041 (P3-17): IOPort hm2/hm2_7i76e.0: IO Pin 042 (P3-05): IOPort hm2/hm2_7i76e.0: IO Pin 043 (P3-06): IOPort hm2/hm2_7i76e.0: IO Pin 044 (P3-07): IOPort hm2/hm2_7i76e.0: IO Pin 045 (P3-08): IOPort hm2/hm2_7i76e.0: IO Pin 046 (P3-09): IOPort hm2/hm2_7i76e.0: IO Pin 047 (P3-10): IOPort hm2/hm2_7i76e.0: IO Pin 048 (P3-11): IOPort hm2/hm2_7i76e.0: IO Pin 049 (P3-12): IOPort hm2/hm2_7i76e.0: IO Pin 050 (P3-13): IOPort hm2/hm2_7i76e.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime initialize: module '/home/mjg/linuxcnc/configs/MJG_CNC/python/toplevel.py' init failed: Traceback (most recent call last): File "/home/mjg/linuxcnc/configs/MJG_CNC/python/toplevel.py", line 1, in import remap File "/home/mjg/linuxcnc/configs/MJG_CNC/./python/remap.py", line 1, in from stdglue import * ImportError: bad magic number in 'stdglue': b'\x03\xf3\r\n' Interp ctor: can't instantiate Python plugin initialize: module '/home/mjg/linuxcnc/configs/MJG_CNC/python/toplevel.py' init failed: Traceback (most recent call last): File "/home/mjg/linuxcnc/configs/MJG_CNC/python/toplevel.py", line 1, in import remap File "/home/mjg/linuxcnc/configs/MJG_CNC/./python/remap.py", line 1, in from stdglue import * ImportError: bad magic number in 'stdglue': b'\x03\xf3\r\n' Python plugin configure() failed, status = -11 Python plugin required for prolog=, but not available: 108:REMAP = M6 modalgroup=6 prolog=change_prolog ngc=rack_change epilog=change_epilog Python plugin required for epilog=, but not available: 108:REMAP = M6 modalgroup=6 prolog=change_prolog ngc=rack_change epilog=change_epilog note: MAXV max: 80.000 units/sec 4800.000 units/min note: LJOG max: 80.000 units/sec 4800.000 units/min note: LJOG default: 16.667 units/sec 1000.000 units/min A configuration error is preventing LinuxCNC from starting. More information may be available when running from a terminal. 4462 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Sat Feb 10 05:23:36 PM WET 2024 UTC Date: Sat Feb 10 05:23:36 PM UTC 2024 this program: /usr/bin/linuxcnc_info uptime: 17:23:36 up 28 min, 1 user, load average: 1.13, 1.25, 1.16 lsb_release -sa: Debian Debian GNU/Linux 12 (bookworm) 12 bookworm linuxcnc: /usr/bin/linuxcnc pwd: /home/mjg/linuxcnc/configs/MJG_CNC USER: mjg LOGNAME: mjg HOME: /home/mjg EDITOR: VISUAL: LANGUAGE: en_US:en TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1280x960 pixels (339x254 millimeters) PATH: /usr/bin:/home/mjg/linuxcnc/configs/MJG_CNC/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: CNC kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT_RT Debian 6.1.76-1 (2024-02-01) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-6.1.0-18-rt-amd64 root=UUID=27699d9b-12a8-4d4d-974e-6a69e93fcbf8 ro quiet model name: Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz cores: 4 cpu MHz: 900.008 parport: 0000-0000 : parport0 0000-0000 : parport0 serial: 0000-0000 : serial Versions: gcc: gcc (Debian 12.2.0-14) 12.2.0 python: Python 3.11.2 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.2 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /usr/lib/linuxcnc/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python3 dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================-============-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-de 1:2.9.2 all motion controller for CNC machines and robots (German documentation) ii linuxcnc-doc-en 1:2.9.2 all motion controller for CNC machines and robots (English documentation) ii linuxcnc-doc-es 1:2.9.2 all motion controller for CNC machines and robots (Spanish documentation) ii linuxcnc-doc-fr 1:2.9.2 all motion controller for CNC machines and robots (French documentation) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 1:2.9.2 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.9.2 amd64 PC based motion controller for real-time Linux