Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.8.1 Machine configuration directory is '/home/mike/linuxcnc/configs/Mill-with-pendant' Machine configuration file is 'Mill-with-pendant.ini' INIFILE=/home/mike/linuxcnc/configs/Mill-with-pendant/Mill-with-pendant.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=XYZA KINEMATICS=trivkins coordinates=XYZA Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui Found file(REL): ./Mill-with-pendant.hal Found file(REL): ./custom.hal Found file(LIB): /usr/share/linuxcnc/hallib/xhc-hb04.tcl xhc-hb04.tcl: Using existing outpin signame: spindle-vel-cmd-rps-abs Starting TASK program: milltask DELAY= APP: monitor-xhc-hb04 found: Starting DISPLAY program: axis Probe tripped during a coordinate jog. Probe tripped during a coordinate jog. Probe tripped during a coordinate jog. Probe tripped during a coordinate jog. Probe tripped during a coordinate jog. Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 247467 cycles, min=0.000080, max=0.024901, avg=0.010088, 0 latency excursions (> 10x expected cycle time of 0.010000s) xhc-hb04: waiting for XHC-HB04 device xhc-hb04: found XHC-HB04 device xhc-hb04: connection lost, cleaning up hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:10:41:e3 hm2_eth: discovered 7I76E-16 hm2/hm2_7i76e.0: Low Level init 0.15 hm2/hm2_7i76e.0: Smart Serial Firmware Version 43 Board hm2_7i76e.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_7i76e.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_7i76e.0: 51 I/O Pins used: hm2/hm2_7i76e.0: IO Pin 000 (P1-01): StepGen #0, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 001 (P1-14): StepGen #0, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 002 (P1-02): StepGen #1, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 003 (P1-15): StepGen #1, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 004 (P1-03): StepGen #2, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 005 (P1-16): StepGen #2, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 006 (P1-04): StepGen #3, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 007 (P1-17): StepGen #3, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 008 (P1-05): StepGen #4, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 009 (P1-06): StepGen #4, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 010 (P1-07): Smart Serial Interface #0, pin tx0 (Output) hm2/hm2_7i76e.0: IO Pin 011 (P1-08): Smart Serial Interface #0, pin rx0 (Input) hm2/hm2_7i76e.0: IO Pin 012 (P1-09): IOPort hm2/hm2_7i76e.0: IO Pin 013 (P1-10): IOPort hm2/hm2_7i76e.0: IO Pin 014 (P1-11): Encoder #0, pin Index (Input) hm2/hm2_7i76e.0: IO Pin 015 (P1-12): Encoder #0, pin B (Input) hm2/hm2_7i76e.0: IO Pin 016 (P1-13): Encoder #0, pin A (Input) hm2/hm2_7i76e.0: IO Pin 017 (P2-01): IOPort hm2/hm2_7i76e.0: IO Pin 018 (P2-14): IOPort hm2/hm2_7i76e.0: IO Pin 019 (P2-02): IOPort hm2/hm2_7i76e.0: IO Pin 020 (P2-15): IOPort hm2/hm2_7i76e.0: IO Pin 021 (P2-03): IOPort hm2/hm2_7i76e.0: IO Pin 022 (P2-16): IOPort hm2/hm2_7i76e.0: IO Pin 023 (P2-04): IOPort hm2/hm2_7i76e.0: IO Pin 024 (P2-17): IOPort hm2/hm2_7i76e.0: IO Pin 025 (P2-05): IOPort hm2/hm2_7i76e.0: IO Pin 026 (P2-06): IOPort hm2/hm2_7i76e.0: IO Pin 027 (P2-07): IOPort hm2/hm2_7i76e.0: IO Pin 028 (P2-08): IOPort hm2/hm2_7i76e.0: IO Pin 029 (P2-09): IOPort hm2/hm2_7i76e.0: IO Pin 030 (P2-10): IOPort hm2/hm2_7i76e.0: IO Pin 031 (P2-11): IOPort hm2/hm2_7i76e.0: IO Pin 032 (P2-12): IOPort hm2/hm2_7i76e.0: IO Pin 033 (P2-13): IOPort hm2/hm2_7i76e.0: IO Pin 034 (P3-01): IOPort hm2/hm2_7i76e.0: IO Pin 035 (P3-14): IOPort hm2/hm2_7i76e.0: IO Pin 036 (P3-02): IOPort hm2/hm2_7i76e.0: IO Pin 037 (P3-15): IOPort hm2/hm2_7i76e.0: IO Pin 038 (P3-03): IOPort hm2/hm2_7i76e.0: IO Pin 039 (P3-16): IOPort hm2/hm2_7i76e.0: IO Pin 040 (P3-04): IOPort hm2/hm2_7i76e.0: IO Pin 041 (P3-17): IOPort hm2/hm2_7i76e.0: IO Pin 042 (P3-05): IOPort hm2/hm2_7i76e.0: IO Pin 043 (P3-06): IOPort hm2/hm2_7i76e.0: IO Pin 044 (P3-07): IOPort hm2/hm2_7i76e.0: IO Pin 045 (P3-08): IOPort hm2/hm2_7i76e.0: IO Pin 046 (P3-09): IOPort hm2/hm2_7i76e.0: IO Pin 047 (P3-10): IOPort hm2/hm2_7i76e.0: IO Pin 048 (P3-11): IOPort hm2/hm2_7i76e.0: IO Pin 049 (P3-12): IOPort hm2/hm2_7i76e.0: IO Pin 050 (P3-13): IOPort hm2/hm2_7i76e.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: using std_start_pause_button xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing xhc-hb04.tcl: !!! target pin does not exist, continuing Failed to make some required connections Signal: : Pin 'halui.spindle.0.stop' was already linked to signal 'spindle-manual-stop' Signal: : Pin 'motion.probe-input' was already linked to signal 'probe-in' Can not find -sec APPLICATIONS -var DELAY -num 1 note: MAXV max: 2.000 units/sec 120.000 units/min note: LJOG max: 2.000 units/sec 120.000 units/min note: LJOG default: 0.500 units/sec 30.000 units/min note: AJOG max: 40.000 units/sec 2400.000 units/min note: AJOG default: 6.000 units/sec 360.000 units/min note: jog_order='XYZA' note: jog_invert=set([]) Exception in Tkinter callback Traceback (most recent call last): File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__ return self.func(*args) File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit func(*args) File "/usr/bin/axis", line 546, in actual_tkRedraw self.tkRedraw_perspective() File "/usr/bin/axis", line 506, in tkRedraw_perspective self.redraw_perspective() File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner return f(self, *args, **kw) File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 599, in redraw_perspective glFlush() # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last): File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__ return self.func(*args) File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit func(*args) File "/usr/bin/axis", line 546, in actual_tkRedraw self.tkRedraw_perspective() File "/usr/bin/axis", line 506, in tkRedraw_perspective self.redraw_perspective() File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner return f(self, *args, **kw) File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 599, in redraw_perspective glFlush() # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last): File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__ return self.func(*args) File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit func(*args) File "/usr/bin/axis", line 546, in actual_tkRedraw self.tkRedraw_perspective() File "/usr/bin/axis", line 506, in tkRedraw_perspective self.redraw_perspective() File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner return f(self, *args, **kw) File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 599, in redraw_perspective glFlush() # Tidy up error: (1285, 'out of memory') Exception in Tkinter callback Traceback (most recent call last): File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 1550, in __call__ return self.func(*args) File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 599, in callit func(*args) File "/usr/bin/axis", line 546, in actual_tkRedraw self.tkRedraw_perspective() File "/usr/bin/axis", line 506, in tkRedraw_perspective self.redraw_perspective() File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 352, in inner return f(self, *args, **kw) File "/usr/lib/python2.7/dist-packages/rs274/glcanon.py", line 599, in redraw_perspective glFlush() # Tidy up error: (1285, 'out of memory') /usr/bin/linuxcnc: line 896: 1189 Segmentation fault $EMCDISPLAY -ini "$INIFILE" $EMCDISPLAYARGS $EXTRA_ARGS 1113 1177 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Sat Jan 9 20:02:27 EST 2021 UTC Date: Sun Jan 10 01:02:27 UTC 2021 this program: /usr/bin/linuxcnc_info uptime: 20:02:27 up 47 min, 1 user, load average: 1.57, 1.79, 1.77 lsb_release -sa: Debian Debian GNU/Linux 10 (buster) 10 buster which linuxcnc: /usr/bin/linuxcnc pwd: /home/mike/linuxcnc/configs/Mill-with-pendant USER: mike LOGNAME: mike HOME: /home/mike EDITOR: VISUAL: LANGUAGE: en_CA:en TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1920x1080 pixels (508x285 millimeters) PATH: /usr/bin:/home/mike/linuxcnc/configs/Mill-with-pendant/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: CNCMill kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Debian 4.19.160-2 (2020-11-28) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-4.19.0-13-rt-amd64 root=UUID=9b253477-bacd-444f-9ce3-d518bd1a421e ro initrd=/install/initrd.gz quiet model name: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz cores: 4 cpu MHz: 1801.082 parport: 0000-0000 : parport0 serial: 0000-0000 : serial 0000-0000 : serial Versions: gcc: gcc (Debian 8.3.0-6) 8.3.0 python: Python 2.7.16 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.8.1 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /etc/init.d/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================-============-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-cn 1:2.8.1 all motion controller for CNC machines and robots (Chinese ii linuxcnc-doc-en 1:2.8.1 all motion controller for CNC machines and robots (English documentation) ii linuxcnc-doc-es 1:2.8.1 all controlador de movimiento para máquinas CNC y robots (Español). ii linuxcnc-doc-fr 1:2.8.1 all motion controller for CNC machines and robots (French documentation) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 1:2.8.1 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.8.1 amd64 PC based motion controller for real-time Linux