[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4-9-rtai-686-pae (Debian 3.4.55-4linuxcnc) () (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Debian 3.4.55-4linuxcnc [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe80000 (usable) [ 0.000000] BIOS-e820: 00000000cfe80000 - 00000000cfe98000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfe98000 - 00000000cfec0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfec0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/M5A78L-M/USB3, BIOS 2101 12/02/2014 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xcfe80 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x017f8000-0x017fffff] [ 0.000000] RAMDISK: 3652a000 - 3728d000 [ 0.000000] ACPI: RSDP 000fb490 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT cfe80100 00054 (v01 120214 XSDT0955 20141202 MSFT 00000097) [ 0.000000] ACPI: FACP cfe80290 000F4 (v03 120214 FACP0955 20141202 MSFT 00000097) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579) [ 0.000000] ACPI: DSDT cfe80460 0DBCE (v01 A1887 A1887001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS cfe98000 00040 [ 0.000000] ACPI: APIC cfe80390 0008C (v01 120214 APIC0955 20141202 MSFT 00000097) [ 0.000000] ACPI: MCFG cfe80420 0003C (v01 120214 OEMMCFG 20141202 MSFT 00000097) [ 0.000000] ACPI: OEMB cfe98040 00072 (v01 120214 OEMB0955 20141202 MSFT 00000097) [ 0.000000] ACPI: HPET cfe8f460 00038 (v01 120214 OEMHPET 20141202 MSFT 00000097) [ 0.000000] ACPI: SSDT cfe8f4a0 00194 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2438MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000cfe80 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfe80 [ 0.000000] On node 0 totalpages: 851471 [ 0.000000] free_area_init_node: node 0, pgdat c1498a00, node_mem_map f4b2a200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4878 pages used for memmap [ 0.000000] HighMem zone: 619380 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) [ 0.000000] ACPI: IOAPIC (id[0x14] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 20, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:2ff00000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 17 pages/cpu @f7763000 s48384 r0 d21248 u69632 [ 0.000000] pcpu-alloc: s48384 r0 d21248 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844817 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-9-rtai-686-pae root=UUID=5f53e1cc-853b-4ee3-b124-0116e39c18c2 ro initrd=/install/gtk/initrd.gz lapic quiet rootdelay=5 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] allocated 6812544 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000cfe80) [ 0.000000] Memory: 3351616k/3406336k available (3495k kernel code, 54268k reserved, 1237k data, 416k init, 2497032k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc14a0000 - 0xc1508000 ( 416 kB) [ 0.000000] .data : 0xc1369d4a - 0xc149f480 (1237 kB) [ 0.000000] .text : 0xc1000000 - 0xc1369d4a (3495 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:744 16 [ 0.000000] CPU 0 irqstacks, hard=f4006000 soft=f4008000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Interrupt pipeline (release #3) [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 3616.219 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7232.43 BogoMIPS (lpj=14464876) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000036] Security Framework initialized [ 0.000039] AppArmor: AppArmor disabled by boot time parameter [ 0.000052] Mount-cache hash table entries: 512 [ 0.000184] Initializing cgroup subsys cpuacct [ 0.000185] Initializing cgroup subsys memory [ 0.000190] Initializing cgroup subsys devices [ 0.000192] Initializing cgroup subsys freezer [ 0.000193] Initializing cgroup subsys net_cls [ 0.000195] Initializing cgroup subsys blkio [ 0.000198] Initializing cgroup subsys perf_event [ 0.000216] CPU: Physical Processor ID: 0 [ 0.000217] CPU: Processor Core ID: 0 [ 0.000219] mce: CPU supports 7 MCE banks [ 0.000225] LVT offset 1 assigned for vector 0xf9 [ 0.000287] ACPI: Core revision 20120320 [ 0.014091] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.014426] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.054089] CPU0: AMD FX(tm)-4100 Quad-Core Processor stepping 02 [ 0.159076] Performance Events: AMD Family 15h PMU driver. [ 0.159080] ... version: 0 [ 0.159081] ... bit width: 48 [ 0.159082] ... generic registers: 6 [ 0.159083] ... value mask: 0000ffffffffffff [ 0.159085] ... max period: 00007fffffffffff [ 0.159086] ... fixed-purpose events: 0 [ 0.159087] ... event mask: 000000000000003f [ 0.171089] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.183082] CPU 1 irqstacks, hard=f4098000 soft=f409a000 [ 0.183084] Booting Node 0, Processors #1 [ 0.193773] Initializing CPU#1 [ 0.196595] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.203074] CPU 2 irqstacks, hard=f40aa000 soft=f40ac000 [ 0.203077] #2 [ 0.213758] Initializing CPU#2 [ 0.216114] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.223058] CPU 3 irqstacks, hard=f40dc000 soft=f40de000 [ 0.223060] #3 [ 0.233744] Initializing CPU#3 [ 0.236095] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.236119] Brought up 4 CPUs [ 0.236121] Total of 4 processors activated (28929.75 BogoMIPS). [ 0.242677] devtmpfs: initialized [ 0.242850] PM: Registering ACPI NVS region [mem 0xcfe98000-0xcfebffff] (163840 bytes) [ 0.242930] dummy: [ 0.242984] NET: Registered protocol family 16 [ 0.243086] ACPI: bus type pci registered [ 0.243132] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.243135] PCI: not using MMCONFIG [ 0.243968] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 [ 0.243970] PCI: Using configuration type 1 for base access [ 0.243971] PCI: Using configuration type 1 for extended access [ 0.244563] bio: create slab at 0 [ 0.244665] ACPI: Added _OSI(Module Device) [ 0.244667] ACPI: Added _OSI(Processor Device) [ 0.244668] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.244670] ACPI: Added _OSI(Processor Aggregator Device) [ 0.245981] ACPI: EC: Look up EC in DSDT [ 0.248250] ACPI: Executed 3 blocks of module-level executable AML code [ 0.304740] ACPI: Interpreter enabled [ 0.304747] ACPI: (supports S0 S1 S3 S4 S5) [ 0.304770] ACPI: Using IOAPIC for interrupt routing [ 0.304789] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.306426] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.306428] PCI: Using MMCONFIG for extended config space [ 0.311205] ACPI: No dock devices found. [ 0.311209] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.311280] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.311401] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.311403] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.311405] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.311407] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.311409] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff] [ 0.311411] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.311438] PCI host bridge to bus 0000:00 [ 0.311440] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.311442] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.311443] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.311445] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.311447] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff] [ 0.311449] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] [ 0.311461] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000 [ 0.311504] pci 0000:00:01.0: [1043:9602] type 01 class 0x060400 [ 0.311543] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400 [ 0.311571] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.311588] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400 [ 0.311615] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.311643] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.311663] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007] [ 0.311672] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003] [ 0.311682] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007] [ 0.311691] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003] [ 0.311701] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f] [ 0.311710] pci 0000:00:11.0: reg 24: [mem 0xfe8ffc00-0xfe8fffff] [ 0.311754] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.311768] pci 0000:00:12.0: reg 10: [mem 0xfe8fe000-0xfe8fefff] [ 0.311831] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 [ 0.311845] pci 0000:00:12.1: reg 10: [mem 0xfe8fd000-0xfe8fdfff] [ 0.311913] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.311932] pci 0000:00:12.2: reg 10: [mem 0xfe8ff800-0xfe8ff8ff] [ 0.312002] pci 0000:00:12.2: supports D1 D2 [ 0.312004] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.312027] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.312045] pci 0000:00:13.0: reg 10: [mem 0xfe8fc000-0xfe8fcfff] [ 0.312109] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 [ 0.312123] pci 0000:00:13.1: reg 10: [mem 0xfe8fb000-0xfe8fbfff] [ 0.312192] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.312211] pci 0000:00:13.2: reg 10: [mem 0xfe8ff400-0xfe8ff4ff] [ 0.312282] pci 0000:00:13.2: supports D1 D2 [ 0.312283] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.312310] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.312403] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a [ 0.312419] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.312429] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.312438] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.312448] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.312457] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.312506] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.312528] pci 0000:00:14.2: reg 10: [mem 0xfe8f4000-0xfe8f7fff 64bit] [ 0.312586] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.312604] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.312678] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.312718] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.312732] pci 0000:00:14.5: reg 10: [mem 0xfe8fa000-0xfe8fafff] [ 0.312798] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 0.312818] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 0.312833] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 0.312849] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 0.312866] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 0.312882] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 0.312929] pci 0000:01:05.0: [1002:9616] type 00 class 0x030000 [ 0.312937] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref] [ 0.312942] pci 0000:01:05.0: reg 14: [io 0xd000-0xd0ff] [ 0.312947] pci 0000:01:05.0: reg 18: [mem 0xfeaf0000-0xfeafffff] [ 0.312958] pci 0000:01:05.0: reg 24: [mem 0xfe900000-0xfe9fffff] [ 0.312971] pci 0000:01:05.0: supports D1 D2 [ 0.312982] pci 0000:01:05.1: [1002:960f] type 00 class 0x040300 [ 0.312990] pci 0000:01:05.1: reg 10: [mem 0xfeae8000-0xfeaebfff] [ 0.313019] pci 0000:01:05.1: supports D1 D2 [ 0.313057] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.313060] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.313063] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff] [ 0.313066] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.313107] pci 0000:02:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.313125] pci 0000:02:00.0: reg 10: [mem 0xfebf0000-0xfebf7fff 64bit] [ 0.313201] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.320052] pci 0000:00:07.0: PCI bridge to [bus 02-02] [ 0.320057] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.320098] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.320112] pci 0000:03:00.0: reg 10: [io 0xe800-0xe8ff] [ 0.320133] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref] [ 0.320147] pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref] [ 0.320184] pci 0000:03:00.0: supports D1 D2 [ 0.320186] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.328046] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 0.328050] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.328055] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.328085] pci 0000:04:06.0: [2718:5125] type 00 class 0x110000 [ 0.328103] pci 0000:04:06.0: reg 10: [mem 0x00000000-0x0000ffff] [ 0.328220] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) [ 0.328229] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.328231] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.328233] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.328235] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.328237] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode) [ 0.328239] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 0.328252] pci_bus 0000:00: on NUMA node 0 [ 0.328255] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.328488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.328532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [ 0.328563] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.328610] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.328676] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f) [ 0.333719] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 12 14 15) [ 0.333756] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15) [ 0.333791] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15) [ 0.333828] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.333862] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.333898] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.333933] ACPI: PCI Interrupt Link [LNKG] (IRQs *11) [ 0.333965] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.334040] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.334044] vgaarb: loaded [ 0.334045] vgaarb: bridge control possible 0000:01:05.0 [ 0.334067] PCI: Using ACPI for IRQ routing [ 0.334069] PCI: pci_cache_line_size set to 64 bytes [ 0.334149] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.334151] reserve RAM buffer: 00000000cfe80000 - 00000000cfffffff [ 0.334246] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.334251] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.336292] Switching to clocksource hpet [ 0.336360] pnp: PnP ACPI init [ 0.336368] ACPI: bus type pnp registered [ 0.336444] pnp 00:00: [bus 00-ff] [ 0.336446] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.336448] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.336450] pnp 00:00: [io 0x0d00-0xffff window] [ 0.336451] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.336453] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.336455] pnp 00:00: [mem 0xcff00000-0xdfffffff window] [ 0.336457] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.336488] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.336555] pnp 00:01: [mem 0x00000000-0xffffffff disabled] [ 0.336557] pnp 00:01: [mem 0x00000000-0xffffffff disabled] [ 0.336591] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.336628] pnp 00:02: [dma 4] [ 0.336629] pnp 00:02: [io 0x0000-0x000f] [ 0.336631] pnp 00:02: [io 0x0081-0x0083] [ 0.336633] pnp 00:02: [io 0x0087] [ 0.336634] pnp 00:02: [io 0x0089-0x008b] [ 0.336636] pnp 00:02: [io 0x008f] [ 0.336637] pnp 00:02: [io 0x00c0-0x00df] [ 0.336659] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.336668] pnp 00:03: [io 0x0070-0x0071] [ 0.336675] pnp 00:03: [irq 8] [ 0.336698] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.336705] pnp 00:04: [io 0x0061] [ 0.336727] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.336735] pnp 00:05: [io 0x00f0-0x00ff] [ 0.336739] pnp 00:05: [irq 13] [ 0.336765] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.337045] pnp 00:06: [mem 0xfed00000-0xfed003ff] [ 0.337069] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.337605] pnp 00:07: [io 0x03f8-0x03ff] [ 0.337609] pnp 00:07: [irq 4] [ 0.337611] pnp 00:07: [dma 0 disabled] [ 0.337681] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.337750] pnp 00:08: [io 0x0060] [ 0.337752] pnp 00:08: [io 0x0064] [ 0.337754] pnp 00:08: [mem 0xfec00000-0xfec00fff] [ 0.337755] pnp 00:08: [mem 0xfee00000-0xfee00fff] [ 0.337796] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.337798] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.337801] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.337950] pnp 00:09: [io 0x0010-0x001f] [ 0.337952] pnp 00:09: [io 0x0022-0x003f] [ 0.337954] pnp 00:09: [io 0x0062-0x0063] [ 0.337955] pnp 00:09: [io 0x0065-0x006f] [ 0.337956] pnp 00:09: [io 0x0072-0x007f] [ 0.337958] pnp 00:09: [io 0x0080] [ 0.337959] pnp 00:09: [io 0x0084-0x0086] [ 0.337961] pnp 00:09: [io 0x0088] [ 0.337962] pnp 00:09: [io 0x008c-0x008e] [ 0.337963] pnp 00:09: [io 0x0090-0x009f] [ 0.337965] pnp 00:09: [io 0x00a2-0x00bf] [ 0.337966] pnp 00:09: [io 0x00b1] [ 0.337968] pnp 00:09: [io 0x00e0-0x00ef] [ 0.337969] pnp 00:09: [io 0x04d0-0x04d1] [ 0.337971] pnp 00:09: [io 0x040b] [ 0.337972] pnp 00:09: [io 0x04d6] [ 0.337973] pnp 00:09: [io 0x0c00-0x0c01] [ 0.337975] pnp 00:09: [io 0x0c14] [ 0.337976] pnp 00:09: [io 0x0c50-0x0c51] [ 0.337977] pnp 00:09: [io 0x0c52] [ 0.337979] pnp 00:09: [io 0x0c6c] [ 0.337980] pnp 00:09: [io 0x0c6f] [ 0.337982] pnp 00:09: [io 0x0cd0-0x0cd1] [ 0.337983] pnp 00:09: [io 0x0cd2-0x0cd3] [ 0.337984] pnp 00:09: [io 0x0cd4-0x0cd5] [ 0.337986] pnp 00:09: [io 0x0cd6-0x0cd7] [ 0.337987] pnp 00:09: [io 0x0cd8-0x0cdf] [ 0.337989] pnp 00:09: [io 0x0b00-0x0b3f] [ 0.337990] pnp 00:09: [io 0x0800-0x089f] [ 0.337992] pnp 00:09: [io 0x0000-0xffffffff disabled] [ 0.337993] pnp 00:09: [io 0x0b00-0x0b0f] [ 0.337995] pnp 00:09: [io 0x0b20-0x0b3f] [ 0.337996] pnp 00:09: [io 0x0900-0x090f] [ 0.337999] pnp 00:09: [io 0x0910-0x091f] [ 0.338000] pnp 00:09: [io 0xfe00-0xfefe] [ 0.338002] pnp 00:09: [io 0x0060] [ 0.338003] pnp 00:09: [io 0x0064] [ 0.338005] pnp 00:09: [mem 0xcff00000-0xcfffffff] [ 0.338006] pnp 00:09: [mem 0xffb80000-0xffbfffff] [ 0.338008] pnp 00:09: [mem 0xfec10000-0xfec1001f] [ 0.338010] pnp 00:09: [mem 0xfed40000-0xfed44fff] [ 0.338081] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.338083] system 00:09: [io 0x040b] has been reserved [ 0.338085] system 00:09: [io 0x04d6] has been reserved [ 0.338087] system 00:09: [io 0x0c00-0x0c01] has been reserved [ 0.338089] system 00:09: [io 0x0c14] has been reserved [ 0.338092] system 00:09: [io 0x0c50-0x0c51] has been reserved [ 0.338094] system 00:09: [io 0x0c52] has been reserved [ 0.338096] system 00:09: [io 0x0c6c] has been reserved [ 0.338098] system 00:09: [io 0x0c6f] has been reserved [ 0.338100] system 00:09: [io 0x0cd0-0x0cd1] has been reserved [ 0.338102] system 00:09: [io 0x0cd2-0x0cd3] has been reserved [ 0.338104] system 00:09: [io 0x0cd4-0x0cd5] has been reserved [ 0.338106] system 00:09: [io 0x0cd6-0x0cd7] has been reserved [ 0.338108] system 00:09: [io 0x0cd8-0x0cdf] has been reserved [ 0.338110] system 00:09: [io 0x0b00-0x0b3f] has been reserved [ 0.338112] system 00:09: [io 0x0800-0x089f] has been reserved [ 0.338114] system 00:09: [io 0x0b00-0x0b0f] has been reserved [ 0.338116] system 00:09: [io 0x0b20-0x0b3f] has been reserved [ 0.338118] system 00:09: [io 0x0900-0x090f] has been reserved [ 0.338120] system 00:09: [io 0x0910-0x091f] has been reserved [ 0.338122] system 00:09: [io 0xfe00-0xfefe] has been reserved [ 0.338125] system 00:09: [mem 0xcff00000-0xcfffffff] has been reserved [ 0.338127] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.338129] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.338131] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.338134] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.338278] pnp 00:0a: [io 0x0000-0xffffffff disabled] [ 0.338280] pnp 00:0a: [io 0x0230-0x023f] [ 0.338281] pnp 00:0a: [io 0x0290-0x029f] [ 0.338283] pnp 00:0a: [io 0x0300-0x030f] [ 0.338284] pnp 00:0a: [io 0x0a30-0x0a3f] [ 0.338325] system 00:0a: [io 0x0230-0x023f] has been reserved [ 0.338327] system 00:0a: [io 0x0290-0x029f] has been reserved [ 0.338329] system 00:0a: [io 0x0300-0x030f] has been reserved [ 0.338331] system 00:0a: [io 0x0a30-0x0a3f] has been reserved [ 0.338333] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.338361] pnp 00:0b: [mem 0xe0000000-0xefffffff] [ 0.338401] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.338403] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.338501] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 0.338503] pnp 00:0c: [mem 0x000c0000-0x000cffff] [ 0.338505] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 0.338507] pnp 00:0c: [mem 0x00100000-0xcfefffff] [ 0.338508] pnp 00:0c: [mem 0xfec00000-0xffffffff] [ 0.338552] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.338555] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.338557] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.338559] system 00:0c: [mem 0x00100000-0xcfefffff] could not be reserved [ 0.338561] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.338564] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.338653] pnp: PnP ACPI: found 13 devices [ 0.338655] ACPI: ACPI bus type pnp unregistered [ 0.338657] PnPBIOS: Disabled by ACPI PNP [ 0.375139] pci 0000:00:14.4: BAR 14: assigned [mem 0xf0000000-0xf00fffff] [ 0.375141] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.375144] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.375147] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff] [ 0.375150] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.375153] pci 0000:00:07.0: PCI bridge to [bus 02-02] [ 0.375156] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.375160] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 0.375162] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.375166] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.375170] pci 0000:04:06.0: BAR 0: assigned [mem 0xf0000000-0xf000ffff] [ 0.375175] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 0.375180] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xf00fffff] [ 0.375207] pci 0000:00:14.4: enabling device (0105 -> 0107) [ 0.375214] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.375216] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.375217] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.375219] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.375221] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff] [ 0.375223] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.375225] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.375226] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff] [ 0.375228] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.375230] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.375232] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.375233] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] [ 0.375235] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf00fffff] [ 0.375237] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.375239] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.375241] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.375242] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff] [ 0.375244] pci_bus 0000:04: resource 8 [mem 0xcff00000-0xdfffffff] [ 0.375246] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff] [ 0.375339] NET: Registered protocol family 2 [ 0.375388] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.375546] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.375747] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.375848] TCP: Hash tables configured (established 131072 bind 65536) [ 0.375850] TCP: reno registered [ 0.375852] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.375857] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.375935] NET: Registered protocol family 1 [ 0.376093] pci 0000:01:05.0: Boot video device [ 0.376125] PCI: CLS 64 bytes, default 64 [ 0.376155] Unpacking initramfs... [ 0.600133] Freeing initrd memory: 13708k freed [ 0.603400] LVT offset 0 assigned for vector 0x400 [ 0.603421] perf: AMD IBS detected (0x000000ff) [ 0.603595] audit: initializing netlink socket (disabled) [ 0.603609] type=2000 audit(1514489230.488:1): initialized [ 0.612716] highmem bounce pool size: 64 pages [ 0.612721] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.612998] VFS: Disk quotas dquot_6.5.2 [ 0.613025] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.613085] msgmni has been set to 1695 [ 0.613251] alg: No test for stdrng (krng) [ 0.613280] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.613283] io scheduler noop registered [ 0.613284] io scheduler deadline registered [ 0.613310] io scheduler cfq registered (default) [ 0.613463] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.613475] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.613477] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.613747] GHES: HEST is not enabled! [ 0.613757] isapnp: Scanning for PnP cards... [ 0.967476] isapnp: No Plug & Play device found [ 0.967517] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.987936] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.008610] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.008799] Linux agpgart interface v0.103 [ 1.009101] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.009482] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.009494] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.009628] mousedev: PS/2 mouse device common for all mice [ 1.009657] rtc_cmos 00:03: RTC can wake from S4 [ 1.009771] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.009796] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.009892] TCP: cubic registered [ 1.009971] NET: Registered protocol family 10 [ 1.010143] Mobile IPv6 [ 1.010145] NET: Registered protocol family 17 [ 1.010148] Registering the dns_resolver key type [ 1.010179] Using IPI No-Shortcut mode [ 1.010265] PM: Hibernation image not present or could not be loaded. [ 1.010275] registered taskstats version 1 [ 1.010639] rtc_cmos 00:03: setting system clock to 2017-12-28 19:27:11 UTC (1514489231) [ 1.010718] Freeing unused kernel memory: 416k freed [ 1.010865] Write protecting the kernel text: 3496k [ 1.010887] Write protecting the kernel read-only data: 984k [ 1.021268] udevd[58]: starting version 175 [ 1.034406] SCSI subsystem initialized [ 1.035655] usbcore: registered new interface driver usbfs [ 1.035682] usbcore: registered new interface driver hub [ 1.042252] usbcore: registered new device driver usb [ 1.042875] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.042935] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.042959] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.042970] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.042999] ehci_hcd 0000:00:12.2: debug port 1 [ 1.043025] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe8ff800 [ 1.044809] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.045041] r8169 0000:03:00.0: eth0: RTL8168f/8111f at 0xf8016000, bc:ee:7b:75:6a:42, XID 08000800 IRQ 18 [ 1.045045] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.048946] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.048969] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 1.050057] libata version 3.00 loaded. [ 1.051952] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.051974] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.051977] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.051981] usb usb1: Product: EHCI Host Controller [ 1.051983] usb usb1: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 1.051986] usb usb1: SerialNumber: 0000:00:12.2 [ 1.052109] hub 1-0:1.0: USB hub found [ 1.052114] hub 1-0:1.0: 6 ports detected [ 1.052239] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.052250] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.052258] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.052283] ehci_hcd 0000:00:13.2: debug port 1 [ 1.052309] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe8ff400 [ 1.056674] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.063888] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.063910] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.063914] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.063917] usb usb3: Product: EHCI Host Controller [ 1.063919] usb usb3: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 1.063923] usb usb3: SerialNumber: 0000:00:13.2 [ 1.064102] hub 3-0:1.0: USB hub found [ 1.064108] hub 3-0:1.0: 6 ports detected [ 1.064235] ahci 0000:00:11.0: version 3.0 [ 1.064387] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.064391] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.066319] scsi0 : ahci [ 1.068590] scsi1 : ahci [ 1.069682] scsi2 : ahci [ 1.069770] microcode: CPU0: patch_level=0x06000629 [ 1.069780] scsi3 : ahci [ 1.069872] scsi4 : ahci [ 1.071200] scsi5 : ahci [ 1.071287] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22 [ 1.071293] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22 [ 1.071298] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22 [ 1.071302] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22 [ 1.071307] ata5: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff00 irq 22 [ 1.071311] ata6: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff80 irq 22 [ 1.071439] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 1.072870] scsi6 : pata_atiixp [ 1.072949] scsi7 : pata_atiixp [ 1.073729] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.073732] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.073780] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.073795] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 1.073851] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8fe000 [ 1.098576] microcode: CPU0: new patch_level=0x0600063d [ 1.098684] microcode: CPU1: patch_level=0x06000629 [ 1.112202] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.112211] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.112216] usb usb2: Product: xHCI Host Controller [ 1.112217] usb usb2: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd [ 1.112219] usb usb2: SerialNumber: 0000:02:00.0 [ 1.112329] xHCI xhci_add_endpoint called for root hub [ 1.112333] xHCI xhci_check_bandwidth called for root hub [ 1.112368] hub 2-0:1.0: USB hub found [ 1.112377] hub 2-0:1.0: 2 ports detected [ 1.112475] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.112485] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 5 [ 1.112523] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.112528] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.112532] usb usb5: Product: xHCI Host Controller [ 1.112533] usb usb5: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd [ 1.112535] usb usb5: SerialNumber: 0000:02:00.0 [ 1.112623] xHCI xhci_add_endpoint called for root hub [ 1.112627] xHCI xhci_check_bandwidth called for root hub [ 1.112679] hub 5-0:1.0: USB hub found [ 1.112684] hub 5-0:1.0: 2 ports detected [ 1.123344] microcode: CPU1: new patch_level=0x0600063d [ 1.123358] microcode: CPU2: patch_level=0x06000629 [ 1.131869] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.131874] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.131878] usb usb4: Product: OHCI Host Controller [ 1.131880] usb usb4: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 1.131883] usb usb4: SerialNumber: 0000:00:12.0 [ 1.132050] hub 4-0:1.0: USB hub found [ 1.132060] hub 4-0:1.0: 3 ports detected [ 1.132185] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.132193] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 6 [ 1.132219] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8fd000 [ 1.150110] microcode: CPU2: new patch_level=0x0600063d [ 1.140167] microcode: CPU3: patch_level=0x06000629 [ 1.187245] microcode: CPU3: new patch_level=0x0600063d [ 1.188948] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.191910] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.191920] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.191923] usb usb6: Product: OHCI Host Controller [ 1.191926] usb usb6: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 1.191931] usb usb6: SerialNumber: 0000:00:12.1 [ 1.192069] hub 6-0:1.0: USB hub found [ 1.192076] hub 6-0:1.0: 3 ports detected [ 1.192183] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.192199] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7 [ 1.192241] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fc000 [ 1.251785] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.251788] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.251790] usb usb7: Product: OHCI Host Controller [ 1.251792] usb usb7: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 1.251793] usb usb7: SerialNumber: 0000:00:13.0 [ 1.251898] hub 7-0:1.0: USB hub found [ 1.251904] hub 7-0:1.0: 3 ports detected [ 1.252033] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.252047] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 8 [ 1.252062] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8fb000 [ 1.311751] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.311754] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.311756] usb usb8: Product: OHCI Host Controller [ 1.311758] usb usb8: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 1.311759] usb usb8: SerialNumber: 0000:00:13.1 [ 1.311861] hub 8-0:1.0: USB hub found [ 1.311867] hub 8-0:1.0: 3 ports detected [ 1.311945] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.311951] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 9 [ 1.311964] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8fa000 [ 1.371714] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.371717] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.371719] usb usb9: Product: OHCI Host Controller [ 1.371721] usb usb9: Manufacturer: Linux 3.4-9-rtai-686-pae ohci_hcd [ 1.371722] usb usb9: SerialNumber: 0000:00:14.5 [ 1.371813] hub 9-0:1.0: USB hub found [ 1.371820] hub 9-0:1.0: 2 ports detected [ 1.387716] ata5: SATA link down (SStatus 0 SControl 300) [ 1.387750] ata2: SATA link down (SStatus 0 SControl 300) [ 1.387788] ata1: SATA link down (SStatus 0 SControl 300) [ 1.387820] ata6: SATA link down (SStatus 0 SControl 300) [ 1.387858] ata4: SATA link down (SStatus 0 SControl 300) [ 1.483641] usb 2-1: new full-speed USB device number 2 using xhci_hcd [ 1.527060] usb 2-1: New USB device found, idVendor=0557, idProduct=2008 [ 1.527063] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.559624] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.560549] ata3.00: ATA-8: ST3160318AS, HP34, max UDMA/100 [ 1.560552] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.561708] ata3.00: configured for UDMA/100 [ 1.561848] scsi 2:0:0:0: Direct-Access ATA ST3160318AS HP34 PQ: 0 ANSI: 5 [ 1.567863] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.567921] sd 2:0:0:0: [sda] Write Protect is off [ 1.567925] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.567948] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.599574] Refined TSC clocksource calibration: 3616.235 MHz. [ 1.599579] Switching to clocksource tsc [ 1.614912] sda: sda1 sda2 < sda5 > [ 1.615206] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.616532] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.695512] usb 2-2: new low-speed USB device number 3 using xhci_hcd [ 1.747106] usb 2-2: New USB device found, idVendor=413c, idProduct=2103 [ 1.747109] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.747111] usb 2-2: Product: Dell USB/PS2 Combo Rackmount Keyboard [ 1.747113] usb 2-2: Manufacturer: LITE-ON Technology [ 1.747188] usb 2-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.747193] usb 2-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 1.755196] input: LITE-ON Technology Dell USB/PS2 Combo Rackmount Keyboard as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/usb2/2-2/2-2:1.0/input/input0 [ 1.755243] generic-usb 0003:413C:2103.0001: input,hidraw0: USB HID v1.00 Keyboard [LITE-ON Technology Dell USB/PS2 Combo Rackmount Keyboard] on usb-0000:02:00.0-2/input0 [ 1.758116] input: LITE-ON Technology Dell USB/PS2 Combo Rackmount Keyboard as /devices/pci0000:00/0000:00:07.0/0000:02:00.0/usb2/2-2/2-2:1.1/input/input1 [ 1.758202] generic-usb 0003:413C:2103.0002: input,hidraw1: USB HID v1.10 Mouse [LITE-ON Technology Dell USB/PS2 Combo Rackmount Keyboard] on usb-0000:02:00.0-2/input1 [ 1.758222] usbcore: registered new interface driver usbhid [ 1.758224] usbhid: USB HID core driver [ 6.964702] PM: Starting manual resume from disk [ 6.964705] PM: Hibernation image partition 8:5 present [ 6.964706] PM: Looking for hibernation image. [ 6.964872] PM: Image not found (code -22) [ 6.964874] PM: Hibernation image not present or could not be loaded. [ 7.012881] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 9.170856] udevd[394]: starting version 175 [ 9.596939] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 9.596944] ACPI: Power Button [PWRB] [ 9.596999] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 9.597003] ACPI: Power Button [PWRF] [ 9.889613] ATK0110 ATK0110:00: Overriding interface detection [ 9.899397] wmi: Mapper loaded [ 10.131537] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 10.131569] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 10.131598] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 10.131629] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 10.131658] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 10.131687] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 10.131911] snd_hda_intel 0000:01:05.1: setting latency timer to 64 [ 10.146690] udevd[483]: renamed network interface eth0 to eth2 [ 10.313789] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.373244] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251) [ 10.373251] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \SMRG 2 (20120320/utaddress-251) [ 10.373256] ACPI Warning: 0x00000b00-0x00000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 3 (20120320/utaddress-251) [ 10.373262] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.396363] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01 [ 10.396417] sp5100_tco: mmio address 0xfec000f0 already in use [ 10.476193] [drm] Initialized drm 1.1.0 20060810 [ 11.290260] [drm] radeon kernel modesetting enabled. [ 11.290459] radeon 0000:01:05.0: setting latency timer to 64 [ 11.290465] [drm] initializing kernel modesetting (RS780 0x1002:0x9616 0x1043:0x8388). [ 11.290482] [drm] register mmio base: 0xFEAF0000 [ 11.290483] [drm] register mmio size: 65536 [ 11.291722] ATOM BIOS: B27732 [ 11.291740] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used) [ 11.291742] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 11.297951] [drm] Detected VRAM RAM=256M, BAR=256M [ 11.297953] [drm] RAM width 32bits DDR [ 11.298007] [TTM] Zone kernel: Available graphics memory: 434354 kiB [ 11.298009] [TTM] Zone highmem: Available graphics memory: 1682870 kiB [ 11.298010] [TTM] Initializing pool allocator [ 11.298033] [drm] radeon: 256M of VRAM memory ready [ 11.298034] [drm] radeon: 512M of GTT memory ready. [ 11.298051] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 11.298316] [drm] radeon: ib pool ready. [ 11.298382] [drm] Loading RS780 Microcode [ 11.678530] usbcore: registered new interface driver usbserial [ 11.678548] usbcore: registered new interface driver usbserial_generic [ 11.678561] USB Serial support registered for generic [ 11.678577] usbserial: USB Serial Driver core [ 11.684537] usbcore: registered new interface driver pl2303 [ 11.684552] USB Serial support registered for pl2303 [ 11.684565] pl2303 2-1:1.0: pl2303 converter detected [ 11.685229] usb 2-1: pl2303 converter now attached to ttyUSB0 [ 11.852033] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). [ 11.852089] radeon 0000:01:05.0: WB enabled [ 11.852091] [drm] fence driver on ring 0 use gpu addr 0xa0000c00 and cpu addr 0xff997c00 [ 11.852094] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 11.852096] [drm] Driver supports precise vblank timestamp query. [ 11.852110] [drm] radeon: irq initialized. [ 11.883936] [drm] ring test on 0 succeeded in 1 usecs [ 11.884032] [drm] ib test on ring 0 succeeded in 0 usecs [ 11.884226] [drm] Radeon Display Connectors [ 11.884228] [drm] Connector 0: [ 11.884230] [drm] VGA [ 11.884233] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 11.884235] [drm] Encoders: [ 11.884237] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 11.884239] [drm] Connector 1: [ 11.884240] [drm] HDMI-A [ 11.884241] [drm] HPD3 [ 11.884243] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 11.884245] [drm] Encoders: [ 11.884247] [drm] DFP3: INTERNAL_KLDSCP_LVTMA [ 11.884265] [drm] radeon: power management initialized [ 11.939742] [drm] fb mappable at 0xD0142000 [ 11.939745] [drm] vram apper at 0xD0000000 [ 11.939747] [drm] size 7680000 [ 11.939748] [drm] fb depth is 24 [ 11.939750] [drm] pitch is 6400 [ 11.939807] fbcon: radeondrmfb (fb0) is primary device [ 11.977143] Console: switching to colour frame buffer device 200x75 [ 11.992712] fb0: radeondrmfb frame buffer device [ 11.992713] drm: registered panic notifier [ 11.992717] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:05.0 on minor 0 [ 13.129748] Adding 6369276k swap on /dev/sda5. Priority:-1 extents:1 across:6369276k [ 13.141708] EXT4-fs (sda1): re-mounted. Opts: (null) [ 13.351515] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 13.603948] loop: module loaded [ 15.022067] RPC: Registered named UNIX socket transport module. [ 15.022070] RPC: Registered udp transport module. [ 15.022072] RPC: Registered tcp transport module. [ 15.022073] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 15.052324] FS-Cache: Loaded [ 15.073695] NFS: Registering the id_resolver key type [ 15.073709] FS-Cache: Netfs 'nfs' registered for caching [ 15.077781] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 17.184092] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10 [ 19.995489] Bluetooth: Core ver 2.16 [ 19.995504] NET: Registered protocol family 31 [ 19.995506] Bluetooth: HCI device and connection manager initialized [ 19.995508] Bluetooth: HCI socket layer initialized [ 19.995510] Bluetooth: L2CAP socket layer initialized [ 19.995515] Bluetooth: SCO socket layer initialized [ 20.017765] Bluetooth: RFCOMM TTY layer initialized [ 20.017770] Bluetooth: RFCOMM socket layer initialized [ 20.017773] Bluetooth: RFCOMM ver 1.11 [ 20.169784] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.169786] Bluetooth: BNEP filters: protocol multicast [ 20.614084] lp: driver loaded but no devices found [ 20.619669] ppdev: user-space parallel port driver [ 22.616503] r8169 0000:03:00.0: eth2: link down [ 22.616526] r8169 0000:03:00.0: eth2: link down [ 22.616628] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 25.165446] r8169 0000:03:00.0: eth2: link up [ 25.165512] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 32.668439] FS-Cache: Netfs 'cifs' registered for caching [ 32.697619] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3 [ 36.279044] eth2: no IPv6 routers present [ 91.148135] I-pipe: head domain RTAI registered. [ 91.148139] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 91.148292] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 91.148294] SYSINFO: CPUs 4, LINUX APIC IRQ 2312, TIM_FREQ 12555455, CLK_FREQ 3616219000, CPU_FREQ 3616219000 [ 91.148296] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 91.148299] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 12555455, 12555455, 11630250 [ 91.175085] RTAI[malloc]: global heap size = 2097152 bytes, . [ 91.175119] , , kstacks pool size = 524288 bytes. [ 91.175122] RTAI[sched]: hard timer type/freq = APIC/12555455(Hz); default timing: oneshot; linear timed lists. [ 91.175124] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3616219000 hz. [ 91.175126] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 91.193919] RTAI[math]: loaded. [ 91.465474] hm2: loading Mesa HostMot2 driver version 0.15 [ 91.471296] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 [ 91.471322] hm2_pci 0000:04:06.0: enabling device (0000 -> 0002) [ 91.471341] hm2_pci: discovered 5i25 at 0000:04:06.0 [ 91.472394] hm2/hm2_5i25.0: Smart Serial Firmware Version 38 [ 91.529923] Board hm2_5i25.0.7i77.0.0 Hardware Mode 0 = standard [ 91.533037] Board hm2_5i25.0.7i77.0.0 Software Mode 0 = input_output [ 91.535682] Board hm2_5i25.0.7i77.0.0 Software Mode 1 = io_analog [ 91.540299] Board hm2_5i25.0.7i77.0.0 Software Mode 2 = io_analog_fieldvoltage [ 91.546160] Board hm2_5i25.0.7i77.0.0 Software Mode 3 = io_encoder_analog_fieldvoltage [ 91.650021] Board hm2_5i25.0.7i77.0.1 Hardware Mode 0 = standard [ 91.653449] Board hm2_5i25.0.7i77.0.1 Software Mode 0 = analogout_enables [ 91.804008] hm2/hm2_5i25.0: 34 I/O Pins used: [ 91.804010] hm2/hm2_5i25.0: IO Pin 000 (P3-01): IOPort [ 91.804012] hm2/hm2_5i25.0: IO Pin 001 (P3-14): IOPort [ 91.804014] hm2/hm2_5i25.0: IO Pin 002 (P3-02): IOPort [ 91.804016] hm2/hm2_5i25.0: IO Pin 003 (P3-15): Smart Serial Interface #0, pin TxData1 (Output) [ 91.804018] hm2/hm2_5i25.0: IO Pin 004 (P3-03): Smart Serial Interface #0, pin RxData1 (Input) [ 91.804021] hm2/hm2_5i25.0: IO Pin 005 (P3-16): Smart Serial Interface #0, pin TxData0 (Output) [ 91.804023] hm2/hm2_5i25.0: IO Pin 006 (P3-04): Smart Serial Interface #0, pin RxData0 (Input) [ 91.804027] hm2/hm2_5i25.0: IO Pin 007 (P3-17): Muxed Encoder Select #0, pin Mux Select 0 (Output) [ 91.804030] hm2/hm2_5i25.0: IO Pin 008 (P3-05): Muxed Encoder #0, pin Muxed A (Input) [ 91.804032] hm2/hm2_5i25.0: IO Pin 009 (P3-06): Muxed Encoder #0, pin Muxed B (Input) [ 91.804034] hm2/hm2_5i25.0: IO Pin 010 (P3-07): Muxed Encoder #0, pin Muxed Index (Input) [ 91.804036] hm2/hm2_5i25.0: IO Pin 011 (P3-08): Muxed Encoder #1, pin Muxed A (Input) [ 91.804038] hm2/hm2_5i25.0: IO Pin 012 (P3-09): Muxed Encoder #1, pin Muxed B (Input) [ 91.804040] hm2/hm2_5i25.0: IO Pin 013 (P3-10): Muxed Encoder #1, pin Muxed Index (Input) [ 91.804042] hm2/hm2_5i25.0: IO Pin 014 (P3-11): Muxed Encoder #2, pin Muxed A (Input) [ 91.804044] hm2/hm2_5i25.0: IO Pin 015 (P3-12): Muxed Encoder #2, pin Muxed B (Input) [ 91.804046] hm2/hm2_5i25.0: IO Pin 016 (P3-13): Muxed Encoder #2, pin Muxed Index (Input) [ 91.804047] hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort [ 91.804049] hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort [ 91.804050] hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort [ 91.804052] hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort [ 91.804053] hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort [ 91.804055] hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort [ 91.804056] hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort [ 91.804058] hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort [ 91.804059] hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort [ 91.804061] hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort [ 91.804062] hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort [ 91.804064] hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort [ 91.804065] hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort [ 91.804066] hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort [ 91.804068] hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort [ 91.804069] hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort [ 91.804071] hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort [ 91.804163] hm2/hm2_5i25.0: registered [ 91.804165] hm2_5i25.0: initialized AnyIO board at 0000:04:06.0 [ 3984.201980] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 remote error = (31) LBPCOM Fault [ 3984.201984] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 remote error = (30) Illegal Remote Mode [ 3984.201986] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 remote error = (29) Under Voltage [ 3984.201987] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 remote error = (28) Over Voltage [ 3984.201989] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 remote error = (27) Over Current [ 3984.201990] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 remote error = (26) Over Temperature [ 3984.201992] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 remote error = (25) No Enable [ 3984.201993] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 remote error = (24) Watchdog Fault [ 3984.201995] hm2/hm2_5i25.0: Smart serial card hm2_5i25.0.7i77.0.0 remote error = (8) Remote fault [ 4319.677918] hm2_5i25.0: dropping AnyIO board at 0000:04:06.0 [ 4319.677922] hm2/hm2_5i25.0: unregistered [ 4319.677956] hm2_pci: driver unloaded [ 4319.679321] hm2: unloading [ 4321.804396] RTAI[math]: unloaded. [ 4321.805827] SCHED releases registered named ALIEN PEDV$D [ 4321.810392] RTAI[malloc]: unloaded. [ 4321.906611] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 4321.908063] I-pipe: head domain RTAI unregistered. [ 4321.908244] RTAI[hal]: unmounted.