pronum@pronum:~$ dmesg [ 0.000000] Linux version 4.9.0-9-rt-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP PREEMPT RT Debian 4.9.168-1 (2019-04-12) [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000b6cd1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b6cd2000-0x00000000b6d1afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b6d1b000-0x00000000b6d25fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b6d26000-0x00000000b6d26fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b6d27000-0x00000000b6d4afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b6d4b000-0x00000000b6d4cfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b6d4d000-0x00000000b6d6dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b6d6e000-0x00000000b6d90fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b6d91000-0x00000000b6d9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b6d9f000-0x00000000b6da0fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b6da1000-0x00000000b6db1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b6db2000-0x00000000b6ddcfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b6ddd000-0x00000000b6e1ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b6e20000-0x00000000b6ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b7800000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023e5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: LENOVO 5048CD8/, BIOS 9HKT53AUS 07/18/2012 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x23e600 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FC0000000 write-back [ 0.000000] 2 base 0B7800000 mask FFF800000 uncachable [ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable [ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 5 base 23E600000 mask FFFE00000 uncachable [ 0.000000] 6 base 23E800000 mask FFF800000 uncachable [ 0.000000] 7 base 23F000000 mask FFF000000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0xb7800000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000fcd60-0x000fcd6f] mapped at [c00fcd60] [ 0.000000] initial memory mapped: [mem 0x00000000-0x18ffffff] [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] BRK [0x18a9f000, 0x18a9ffff] PGTABLE [ 0.000000] BRK [0x18aa0000, 0x18aa1fff] PGTABLE [ 0.000000] BRK [0x18aa2000, 0x18aa2fff] PGTABLE [ 0.000000] BRK [0x18aa3000, 0x18aa3fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x353af000-0x369cefff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0420 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000B6D1B070 000064 (v01 LENOVO TC-9H 00000135 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000B6D24D28 0000F4 (v04 LENOVO TC-9H 00000135 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000B6D1B168 009BC0 (v02 LENOVO TC-9H 00000135 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000B6D96F80 000040 [ 0.000000] ACPI: APIC 0x00000000B6D24E20 000072 (v03 LENOVO TC-9H 00000135 AMI 00010013) [ 0.000000] ACPI: SSDT 0x00000000B6D24E98 000102 (v01 LENOVO TC-9H 00000135 MSFT 03000001) [ 0.000000] ACPI: MCFG 0x00000000B6D24FA0 00003C (v01 LENOVO TC-9H 00000135 MSFT 00000097) [ 0.000000] ACPI: SLIC 0x00000000B6D24FE0 000176 (v01 LENOVO TC-9H 00000135 AMI 00010013) [ 0.000000] ACPI: HPET 0x00000000B6D25158 000038 (v01 LENOVO TC-9H 00000135 AMI. 00000004) [ 0.000000] ACPI: ASF! 0x00000000B6D25190 0000A0 (v32 LENOVO TC-9H 00000135 TFSM 000F4240) [ 0.000000] ACPI: TCPA 0x00000000B6D25230 000032 (v02 LENOVO TC-9H 00000135 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 8300MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff] [ 0.000000] HighMem [mem 0x00000000379fe000-0x000000023e5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ 0.000000] node 0: [mem 0x0000000040200000-0x00000000b6cd1fff] [ 0.000000] node 0: [mem 0x00000000b6d4b000-0x00000000b6d4cfff] [ 0.000000] node 0: [mem 0x00000000b6e20000-0x00000000b6ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023e5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023e5fffff] [ 0.000000] On node 0 totalpages: 2052176 [ 0.000000] free_area_init_node: node 0, pgdat d882db80, node_mem_map ef9eb028 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] Normal zone: 2185 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1824950 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Reserving Intel graphics memory at 0x00000000b7a00000-0x00000000bf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] e820: [mem 0xbfa00000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 101 pages/cpu @f7866000 s381472 r0 d32224 u413696 [ 0.000000] pcpu-alloc: s381472 r0 d32224 u413696 alloc=101*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2049951 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-9-rt-686-pae root=UUID=a8d7b4a8-17d3-4e0b-95c2-9f19ef6f05b0 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] microcode: microcode updated early to revision 0x2d, date = 2018-02-07 [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000379fe:0023e600) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 8079680K/8208704K available (6052K kernel code, 630K rwdata, 1756K rodata, 1060K init, 536K bss, 129024K reserved, 0K cma-reserved, 7299800K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xffd36000 - 0xfffff000 (2852 kB) pkmap : 0xffa00000 - 0xffc00000 (2048 kB) vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) .init : 0xd8841000 - 0xd894a000 (1060 kB) .data : 0xd85e9474 - 0xd883f900 (2393 kB) .text : 0xd8000000 - 0xd85e9474 (6053 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4. [ 0.000000] RCU kthread priority: 1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS:2304 nr_irqs:456 16 [ 0.000000] CPU 0 irqstacks, hard=f703e000 soft=f7080000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 3092.967 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.93 BogoMIPS (lpj=12371868) [ 0.000003] pid_max: default: 32768 minimum: 301 [ 0.000012] ACPI: Core revision 20160831 [ 0.003632] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.003648] Security Framework initialized [ 0.003649] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.003652] AppArmor: AppArmor disabled by boot time parameter [ 0.003660] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003661] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003837] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003837] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003839] mce: CPU supports 9 MCE banks [ 0.003845] CPU0: Thermal monitoring enabled (TM1) [ 0.003854] process: using mwait in idle threads [ 0.003858] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.003859] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.003860] Spectre V2 : Mitigation: Full generic retpoline [ 0.003861] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.003861] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier [ 0.003861] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.003862] Speculative Store Bypass: Vulnerable [ 0.004115] Freeing SMP alternatives memory: 24K [ 0.329102] ftrace: allocating 24103 entries in 48 pages [ 0.345998] smpboot: Max logical packages: 1 [ 0.346002] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.346726] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.386416] TSC deadline timer enabled [ 0.386420] smpboot: CPU0: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.386424] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.386441] ... version: 3 [ 0.386442] ... bit width: 48 [ 0.386442] ... generic registers: 8 [ 0.386443] ... value mask: 0000ffffffffffff [ 0.386444] ... max period: 00007fffffffffff [ 0.386444] ... fixed-purpose events: 3 [ 0.386445] ... event mask: 00000007000000ff [ 0.442575] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.494553] CPU 1 irqstacks, hard=f720e000 soft=f7210000 [ 0.494554] x86: Booting SMP configuration: [ 0.494556] .... node #0, CPUs: #1 [ 0.495159] Initializing CPU#1 [ 0.538605] CPU 2 irqstacks, hard=f7256000 soft=f7258000 [ 0.538608] #2 [ 0.539144] Initializing CPU#2 [ 0.582650] CPU 3 irqstacks, hard=f72a8000 soft=f72aa000 [ 0.582652] #3 [ 0.583196] Initializing CPU#3 [ 0.585330] x86: Booted up 1 node, 4 CPUs [ 0.585332] smpboot: Total of 4 processors activated (24743.73 BogoMIPS) [ 0.588217] devtmpfs: initialized [ 0.588430] PM: Registering ACPI NVS region [mem 0xb6cd2000-0xb6d1afff] (299008 bytes) [ 0.588437] PM: Registering ACPI NVS region [mem 0xb6d26000-0xb6d26fff] (4096 bytes) [ 0.588438] PM: Registering ACPI NVS region [mem 0xb6d4d000-0xb6d6dfff] (135168 bytes) [ 0.588440] PM: Registering ACPI NVS region [mem 0xb6d91000-0xb6d9efff] (57344 bytes) [ 0.588442] PM: Registering ACPI NVS region [mem 0xb6da1000-0xb6db1fff] (69632 bytes) [ 0.588444] PM: Registering ACPI NVS region [mem 0xb6ddd000-0xb6e1ffff] (274432 bytes) [ 0.588504] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.588507] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.588545] pinctrl core: initialized pinctrl subsystem [ 0.588655] NET: Registered protocol family 16 [ 0.588849] cpuidle: using governor ladder [ 0.588875] cpuidle: using governor menu [ 0.588914] ACPI: bus type PCI registered [ 0.588915] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.588974] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.588976] PCI: not using MMCONFIG [ 0.588976] PCI: Using configuration type 1 for base access [ 0.589063] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.589103] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.589949] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.590101] ACPI: Added _OSI(Module Device) [ 0.590102] ACPI: Added _OSI(Processor Device) [ 0.590102] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.590103] ACPI: Added _OSI(Processor Aggregator Device) [ 0.590292] ACPI: Executed 1 blocks of module-level executable AML code [ 0.594194] ACPI: Dynamic OEM Table Load: [ 0.594199] ACPI: SSDT 0x00000000F72ACC00 00038C (v01 AMI IST 00000001 MSFT 03000001) [ 0.594371] ACPI: Dynamic OEM Table Load: [ 0.594374] ACPI: SSDT 0x00000000F72C4300 000084 (v01 AMI CST 00000001 MSFT 03000001) [ 0.595310] ACPI: Interpreter enabled [ 0.595326] ACPI: (supports S0 S3 S4 S5) [ 0.595327] ACPI: Using IOAPIC for interrupt routing [ 0.595352] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.595406] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.595407] PCI: Using MMCONFIG for extended config space [ 0.595410] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.595647] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.600957] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.600961] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.601150] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.601444] PCI host bridge to bus 0000:00 [ 0.601446] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.601447] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.601449] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.601450] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.601451] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.601452] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.601454] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff window] [ 0.601455] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.601463] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000 [ 0.601551] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000 [ 0.601559] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit] [ 0.601565] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.601568] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.601675] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.601700] pci 0000:00:16.0: reg 0x10: [mem 0xfe42a000-0xfe42a00f 64bit] [ 0.601781] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.601863] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002 [ 0.601885] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7] [ 0.601895] pci 0000:00:16.3: reg 0x14: [mem 0xfe429000-0xfe429fff] [ 0.602040] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.602059] pci 0000:00:19.0: reg 0x10: [mem 0xfe400000-0xfe41ffff] [ 0.602068] pci 0000:00:19.0: reg 0x14: [mem 0xfe428000-0xfe428fff] [ 0.602078] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.602142] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.602181] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.602229] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.602250] pci 0000:00:1a.0: reg 0x10: [mem 0xfe427000-0xfe4273ff] [ 0.602336] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.602375] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.602424] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.602446] pci 0000:00:1b.0: reg 0x10: [mem 0xfe420000-0xfe423fff 64bit] [ 0.602523] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.602609] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.602628] pci 0000:00:1d.0: reg 0x10: [mem 0xfe426000-0xfe4263ff] [ 0.602717] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.602755] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.602800] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.602887] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.602935] pci 0000:00:1f.0: [8086:1c4c] type 00 class 0x060100 [ 0.603156] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.603172] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.603181] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.603190] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.603198] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.603207] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.603216] pci 0000:00:1f.2: reg 0x24: [mem 0xfe425000-0xfe4257ff] [ 0.603262] pci 0000:00:1f.2: PME# supported from D3hot [ 0.603342] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.603360] pci 0000:00:1f.3: reg 0x10: [mem 0xfe424000-0xfe4240ff 64bit] [ 0.603382] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.603546] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode) [ 0.603558] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 0.603560] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 0.603561] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 0.603562] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.603563] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.603564] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.603566] pci 0000:00:1e.0: bridge window [mem 0xbfa00000-0xffffffff window] (subtractive decode) [ 0.603577] pci_bus 0000:00: on NUMA node 0 [ 0.604296] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.604353] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.604413] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.604470] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.604524] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.604580] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 [ 0.604637] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.604694] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.604798] ACPI: Enabled 1 GPEs in block 00 to 3F [ 0.604895] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.604896] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.604899] vgaarb: loaded [ 0.604900] vgaarb: bridge control possible 0000:00:02.0 [ 0.604954] PCI: Using ACPI for IRQ routing [ 0.611236] PCI: pci_cache_line_size set to 64 bytes [ 0.611287] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.611289] e820: reserve RAM buffer [mem 0xb6cd2000-0xb7ffffff] [ 0.611291] e820: reserve RAM buffer [mem 0xb6d4d000-0xb7ffffff] [ 0.611293] e820: reserve RAM buffer [mem 0xb7000000-0xb7ffffff] [ 0.611294] e820: reserve RAM buffer [mem 0x23e600000-0x23fffffff] [ 0.611443] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.611449] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.613483] clocksource: Switched to clocksource hpet [ 0.622232] VFS: Disk quotas dquot_6.6.0 [ 0.622248] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.622321] pnp: PnP ACPI init [ 0.622441] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.622442] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.622444] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.622446] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.622447] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.622450] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.622534] system 00:01: [io 0x0a00-0x0a3f] has been reserved [ 0.622537] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.622810] pnp 00:02: [dma 0 disabled] [ 0.622856] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.623127] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.623180] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.623183] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.623254] pnp 00:05: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.623412] system 00:06: [io 0x0400-0x0453] has been reserved [ 0.623413] system 00:06: [io 0x0458-0x047f] has been reserved [ 0.623415] system 00:06: [io 0x1180-0x119f] has been reserved [ 0.623416] system 00:06: [io 0x0500-0x057f] has been reserved [ 0.623418] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.623420] system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.623422] system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.623423] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ 0.623426] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.623483] system 00:07: [io 0x0454-0x0457] has been reserved [ 0.623485] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.623701] pnp: PnP ACPI: found 8 devices [ 0.623702] PnPBIOS: Disabled by ACPI PNP [ 0.660775] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.660795] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 0.660810] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.660812] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.660813] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.660814] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.660815] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.660816] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.660818] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff window] [ 0.660819] pci_bus 0000:01: resource 4 [io 0x0000-0x03af window] [ 0.660820] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7 window] [ 0.660822] pci_bus 0000:01: resource 6 [io 0x03b0-0x03df window] [ 0.660823] pci_bus 0000:01: resource 7 [io 0x0d00-0xffff window] [ 0.660824] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.660825] pci_bus 0000:01: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.660826] pci_bus 0000:01: resource 10 [mem 0xbfa00000-0xffffffff window] [ 0.660887] NET: Registered protocol family 2 [ 0.661029] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.661039] TCP bind hash table entries: 8192 (order: 5, 229376 bytes) [ 0.661091] TCP: Hash tables configured (established 8192 bind 8192) [ 0.661101] UDP hash table entries: 512 (order: 3, 32768 bytes) [ 0.661110] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) [ 0.661148] NET: Registered protocol family 1 [ 0.661163] pmd_set_huge: Cannot satisfy [mem 0xfe000000-0xfe200000] with a huge-page mapping due to MTRR override. [ 0.661205] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.661587] PCI: CLS 64 bytes, default 64 [ 0.661631] Unpacking initramfs... [ 0.989002] Freeing initrd memory: 22656K [ 0.989384] audit: initializing netlink subsys (disabled) [ 0.989398] audit: type=2000 audit(1560324173.664:1): initialized [ 0.989833] workingset: timestamp_bits=14 max_order=21 bucket_order=7 [ 0.991489] zbud: loaded [ 0.992247] bounce: pool size: 64 pages [ 0.992279] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.992328] io scheduler noop registered [ 0.992329] io scheduler deadline registered [ 0.992356] io scheduler cfq registered (default) [ 0.992422] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.992427] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.992439] intel_idle: MWAIT substates: 0x1120 [ 0.992440] intel_idle: v0.4.1 model 0x2A [ 0.992580] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.992983] GHES: HEST is not enabled! [ 0.992994] isapnp: Scanning for PnP cards... [ 1.351588] isapnp: No Plug & Play device found [ 1.351679] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.372934] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.394234] 0000:00:16.3: ttyS1 at I/O 0xf0e0 (irq = 17, base_baud = 115200) is a 16550A [ 1.394466] Linux agpgart interface v0.103 [ 1.409623] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) [ 1.505654] tpm tpm0: TPM is disabled/deactivated (0x6) [ 1.506305] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.509893] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.509935] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.510147] mousedev: PS/2 mouse device common for all mice [ 1.510202] rtc_cmos 00:03: RTC can wake from S4 [ 1.510497] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.510632] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.510642] intel_pstate: Intel P-state driver initializing [ 1.512136] NET: Registered protocol family 10 [ 1.512596] mip6: Mobile IPv6 [ 1.512599] NET: Registered protocol family 17 [ 1.512603] mpls_gso: MPLS GSO support [ 1.513005] microcode: sig=0x206a7, pf=0x2, revision=0x2d [ 1.513178] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.513184] Using IPI No-Shortcut mode [ 1.513420] registered taskstats version 1 [ 1.513450] zswap: loaded using pool lzo/zbud [ 1.529658] ima: No TPM chip found, activating TPM-bypass! [ 1.529663] ima: Allocated hash algorithm: sha256 [ 1.530151] rtc_cmos 00:03: setting system clock to 2019-06-12 07:22:54 UTC (1560324174) [ 1.530308] PM: Hibernation image not present or could not be loaded. [ 1.530818] Freeing unused kernel memory: 1060K [ 1.531047] Write protecting the kernel text: 6056k [ 1.531274] Write protecting the kernel read-only data: 1760k [ 1.531275] NX-protecting the kernel data: 4184k [ 1.531640] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.555181] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.555286] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.556739] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.597252] pps_core: LinuxPPS API ver. 1 registered [ 1.597254] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.607769] PTP clock support registered [ 1.610072] SCSI subsystem initialized [ 1.622328] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.625712] ACPI: bus type USB registered [ 1.626688] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.626689] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.628988] usbcore: registered new interface driver usbfs [ 1.629330] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.630269] usbcore: registered new interface driver hub [ 1.633733] usbcore: registered new device driver usb [ 1.634359] libata version 3.00 loaded. [ 1.637369] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.639254] ehci-pci: EHCI PCI platform driver [ 1.738588] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.846467] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 44:37:e6:af:eb:51 [ 1.846470] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.846520] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 1.846788] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.846797] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.846820] ehci-pci 0000:00:1a.0: debug port 2 [ 1.850736] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.850917] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe427000 [ 1.865582] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.865672] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.865675] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.865677] usb usb1: Product: EHCI Host Controller [ 1.865679] usb usb1: Manufacturer: Linux 4.9.0-9-rt-686-pae ehci_hcd [ 1.865681] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.866013] hub 1-0:1.0: USB hub found [ 1.866030] hub 1-0:1.0: 3 ports detected [ 1.866321] ahci 0000:00:1f.2: version 3.0 [ 1.876734] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode [ 1.876739] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst [ 1.899102] scsi host0: ahci [ 1.899541] scsi host1: ahci [ 1.899943] scsi host2: ahci [ 1.900272] scsi host3: ahci [ 1.900549] scsi host4: ahci [ 1.900826] scsi host5: ahci [ 1.900920] ata1: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425100 irq 25 [ 1.900921] ata2: DUMMY [ 1.900926] ata3: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425200 irq 25 [ 1.900928] ata4: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425280 irq 25 [ 1.900929] ata5: DUMMY [ 1.900930] ata6: DUMMY [ 1.901193] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.901200] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.901224] ehci-pci 0000:00:1d.0: debug port 2 [ 1.905144] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.905254] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe426000 [ 1.917581] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.917686] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.917688] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.917690] usb usb2: Product: EHCI Host Controller [ 1.917692] usb usb2: Manufacturer: Linux 4.9.0-9-rt-686-pae ehci_hcd [ 1.917694] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.918011] hub 2-0:1.0: USB hub found [ 1.918021] hub 2-0:1.0: 3 ports detected [ 2.017587] tsc: Refined TSC clocksource calibration: 3092.971 MHz [ 2.017598] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c9557da2ab, max_idle_ns: 440795274513 ns [ 2.193573] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.217031] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.218344] ata1.00: ATA-8: ST3250312AS, JC66, max UDMA/100 [ 2.218347] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.219977] ata1.00: configured for UDMA/100 [ 2.221225] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.221300] ata4: SATA link down (SStatus 0 SControl 300) [ 2.224504] scsi 0:0:0:0: Direct-Access ATA ST3250312AS JC66 PQ: 0 ANSI: 5 [ 2.224542] ata3.00: ATAPI: HL-DT-STDVD-RAM GH82N, KU01, max UDMA/133 [ 2.228902] ata3.00: configured for UDMA/133 [ 2.245565] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.273203] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH82N KU01 PQ: 0 ANSI: 5 [ 2.295696] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 2.295746] sd 0:0:0:0: [sda] Write Protect is off [ 2.295749] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.295769] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.313280] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.313281] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.313627] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.331207] sda: sda1 sda2 < sda5 > [ 2.331764] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.342056] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.342059] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.342473] hub 1-1:1.0: USB hub found [ 2.342660] hub 1-1:1.0: 6 ports detected [ 2.394347] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.394350] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.394838] hub 2-1:1.0: USB hub found [ 2.395018] hub 2-1:1.0: 8 ports detected [ 2.629533] usb 1-1.1: new low-speed USB device number 3 using ehci-pci [ 2.702162] PM: Starting manual resume from disk [ 2.702166] PM: Hibernation image partition 8:5 present [ 2.702167] PM: Looking for hibernation image. [ 2.702423] PM: Image not found (code -22) [ 2.702425] PM: Hibernation image not present or could not be loaded. [ 2.744535] usb 1-1.1: New USB device found, idVendor=1c4f, idProduct=0016 [ 2.744539] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.744541] usb 1-1.1: Product: USB Keyboard [ 2.744543] usb 1-1.1: Manufacturer: SIGMACHIP [ 2.748078] hidraw: raw HID events driver (C) Jiri Kosina [ 2.753946] usbcore: registered new interface driver usbhid [ 2.753948] usbhid: USB HID core driver [ 2.754882] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:1C4F:0016.0001/input/input3 [ 2.813856] hid-generic 0003:1C4F:0016.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.1/input0 [ 2.815011] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:1C4F:0016.0002/input/input4 [ 2.825543] usb 1-1.2: new low-speed USB device number 4 using ehci-pci [ 2.842831] random: fast init done [ 2.873839] hid-generic 0003:1C4F:0016.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.1/input1 [ 2.939801] usb 1-1.2: New USB device found, idVendor=0458, idProduct=0186 [ 2.939805] usb 1-1.2: New USB device strings: Mfr=4, Product=40, SerialNumber=0 [ 2.939807] usb 1-1.2: Product: Wired Mouse [ 2.939809] usb 1-1.2: Manufacturer: KYE SYSTEMS CORP. [ 2.942922] input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0458:0186.0003/input/input5 [ 2.943243] hid-generic 0003:0458:0186.0003: input,hidraw2: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:1a.0-1.2/input0 [ 2.943341] usbhid 1-1.2:1.1: couldn't find an input interrupt endpoint [ 2.982566] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.041840] clocksource: Switched to clocksource tsc [ 4.324224] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.472603] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.472882] systemd[1]: Detected architecture x86. [ 4.495263] systemd[1]: Set hostname to . [ 5.130499] random: crng init done [ 5.130503] random: 7 urandom warning(s) missed due to ratelimiting [ 5.675403] systemd[1]: rsync.service: Cannot add dependency job, ignoring: Unit rsync.service is masked. [ 5.675473] systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked. [ 5.676365] systemd[1]: Listening on Syslog Socket. [ 5.676486] systemd[1]: Listening on udev Kernel Socket. [ 5.676509] systemd[1]: Reached target Remote File Systems. [ 5.676575] systemd[1]: Listening on udev Control Socket. [ 5.676835] systemd[1]: Created slice User and Session Slice. [ 6.359745] lp: driver loaded but no devices found [ 6.407101] ppdev: user-space parallel port driver [ 6.542902] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 6.748270] systemd-journald[239]: Received request to flush runtime journal from PID 1 [ 8.026544] wmi: Mapper loaded [ 8.045876] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6 [ 8.045882] ACPI: Power Button [PWRB] [ 8.045964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7 [ 8.045967] ACPI: Power Button [PWRF] [ 8.229673] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000043F (\PMB0) (20160831/utaddress-247) [ 8.229680] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 8.230193] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 8.331663] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 8.331666] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 8.331667] RAPL PMU: hw unit of domain package 2^-16 Joules [ 8.331668] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 8.339316] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 8.484828] [drm] Initialized [ 8.612138] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.612187] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 8.646509] iTCO_vendor_support: vendor-support=0 [ 8.647068] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 8.647117] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 8.647248] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.200554] kvm: disabled by bios [ 9.252620] [drm] Memory usable by graphics device = 2048M [ 9.252622] [drm] Replacing VGA console driver [ 9.253162] Console: switching to colour dummy device 80x25 [ 9.259293] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.259295] [drm] Driver supports precise vblank timestamp query. [ 9.283840] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 9.289031] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0 [ 9.315101] fbcon: inteldrmfb (fb0) is primary device [ 9.387071] Console: switching to colour frame buffer device 240x67 [ 9.398317] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 9.398320] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 9.398322] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 9.398324] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 9.398325] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 9.398328] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 9.398330] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 9.398332] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 9.443631] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 9.677106] Adding 8207356k swap on /dev/sda5. Priority:-1 extents:1 across:8207356k FS [ 9.786620] intel_rapl: Found RAPL domain package [ 9.786623] intel_rapl: Found RAPL domain core [ 9.786625] intel_rapl: Found RAPL domain uncore [ 9.786630] intel_rapl: RAPL package 0 domain package locked by BIOS [ 9.870452] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops vgt_balloon_space [i915]) [ 9.873704] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 9.873953] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 9.874203] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 9.874296] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 9.878714] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 9.882130] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 15.006144] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.515627] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 16.515633] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 16.515681] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 72.486118] e1000e: eth0 NIC Link is Down [ 96.055794] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 96.055802] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 139.323564] usb 1-1-port2: disabled by hub (EMI?), re-enabling... [ 139.323570] usb 1-1.2: USB disconnect, device number 4 [ 139.581686] usb 1-1.2: new low-speed USB device number 5 using ehci-pci [ 139.695064] usb 1-1.2: New USB device found, idVendor=0458, idProduct=0186 [ 139.695067] usb 1-1.2: New USB device strings: Mfr=4, Product=40, SerialNumber=0 [ 139.695068] usb 1-1.2: Product: Wired Mouse [ 139.695069] usb 1-1.2: Manufacturer: KYE SYSTEMS CORP. [ 139.697898] input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0458:0186.0004/input/input15 [ 139.697994] hid-generic 0003:0458:0186.0004: input,hidraw2: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:1a.0-1.2/input0 [ 139.698040] usbhid 1-1.2:1.1: couldn't find an input interrupt endpoint [ 140.091554] usb 1-1-port2: disabled by hub (EMI?), re-enabling... [ 140.091560] usb 1-1.2: USB disconnect, device number 5 [ 140.357685] usb 1-1.2: new low-speed USB device number 6 using ehci-pci [ 140.471205] usb 1-1.2: New USB device found, idVendor=0458, idProduct=0186 [ 140.471208] usb 1-1.2: New USB device strings: Mfr=4, Product=40, SerialNumber=0 [ 140.471209] usb 1-1.2: Product: Wired Mouse [ 140.471210] usb 1-1.2: Manufacturer: KYE SYSTEMS CORP. [ 140.473895] input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0458:0186.0005/input/input16 [ 140.474434] hid-generic 0003:0458:0186.0005: input,hidraw2: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:1a.0-1.2/input0 [ 140.474481] usbhid 1-1.2:1.1: couldn't find an input interrupt endpoint [ 141.627550] usb 1-1-port2: disabled by hub (EMI?), re-enabling... [ 141.627556] usb 1-1.2: USB disconnect, device number 6 [ 141.901689] usb 1-1.2: new low-speed USB device number 7 using ehci-pci [ 142.015050] usb 1-1.2: New USB device found, idVendor=0458, idProduct=0186 [ 142.015052] usb 1-1.2: New USB device strings: Mfr=4, Product=40, SerialNumber=0 [ 142.015053] usb 1-1.2: Product: Wired Mouse [ 142.015054] usb 1-1.2: Manufacturer: KYE SYSTEMS CORP. [ 142.017613] input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0458:0186.0006/input/input17 [ 142.018529] hid-generic 0003:0458:0186.0006: input,hidraw2: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:1a.0-1.2/input0 [ 142.018577] usbhid 1-1.2:1.1: couldn't find an input interrupt endpoint [ 143.675539] usb 1-1-port2: disabled by hub (EMI?), re-enabling... [ 143.675545] usb 1-1.2: USB disconnect, device number 7 [ 143.933691] usb 1-1.2: new low-speed USB device number 8 using ehci-pci [ 144.047416] usb 1-1.2: New USB device found, idVendor=0458, idProduct=0186 [ 144.047419] usb 1-1.2: New USB device strings: Mfr=4, Product=40, SerialNumber=0 [ 144.047420] usb 1-1.2: Product: Wired Mouse [ 144.047421] usb 1-1.2: Manufacturer: KYE SYSTEMS CORP. [ 144.049936] input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0458:0186.0007/input/input18 [ 144.050032] hid-generic 0003:0458:0186.0007: input,hidraw2: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:1a.0-1.2/input0 [ 144.050079] usbhid 1-1.2:1.1: couldn't find an input interrupt endpoint [ 154.427494] usb 1-1-port2: disabled by hub (EMI?), re-enabling... [ 154.427501] usb 1-1.2: USB disconnect, device number 8 [ 154.685703] usb 1-1.2: new low-speed USB device number 9 using ehci-pci [ 154.799124] usb 1-1.2: New USB device found, idVendor=0458, idProduct=0186 [ 154.799131] usb 1-1.2: New USB device strings: Mfr=4, Product=40, SerialNumber=0 [ 154.799132] usb 1-1.2: Product: Wired Mouse [ 154.799134] usb 1-1.2: Manufacturer: KYE SYSTEMS CORP. [ 154.801555] input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0458:0186.0008/input/input19 [ 154.801648] hid-generic 0003:0458:0186.0008: input,hidraw2: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:1a.0-1.2/input0 [ 154.802700] usbhid 1-1.2:1.1: couldn't find an input interrupt endpoint [ 177.211382] usb 1-1-port2: disabled by hub (EMI?), re-enabling... [ 177.211389] usb 1-1.2: USB disconnect, device number 9 [ 177.481735] usb 1-1.2: new low-speed USB device number 10 using ehci-pci [ 177.591763] usb 1-1.2: device descriptor read/all, error -32 [ 177.677734] usb 1-1.2: new low-speed USB device number 11 using ehci-pci [ 177.791510] usb 1-1.2: New USB device found, idVendor=0458, idProduct=0186 [ 177.791512] usb 1-1.2: New USB device strings: Mfr=4, Product=40, SerialNumber=0 [ 177.791514] usb 1-1.2: Product: Wired Mouse [ 177.791515] usb 1-1.2: Manufacturer: KYE SYSTEMS CORP. [ 177.794109] input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0458:0186.0009/input/input20 [ 177.794292] hid-generic 0003:0458:0186.0009: input,hidraw2: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:1a.0-1.2/input0 [ 177.794340] usbhid 1-1.2:1.1: couldn't find an input interrupt endpoint [ 178.235379] usb 1-1-port2: disabled by hub (EMI?), re-enabling... [ 178.235386] usb 1-1.2: USB disconnect, device number 11 [ 178.493737] usb 1-1.2: new low-speed USB device number 12 using ehci-pci [ 178.607002] usb 1-1.2: New USB device found, idVendor=0458, idProduct=0186 [ 178.607005] usb 1-1.2: New USB device strings: Mfr=4, Product=40, SerialNumber=0 [ 178.607006] usb 1-1.2: Product: Wired Mouse [ 178.607007] usb 1-1.2: Manufacturer: KYE SYSTEMS CORP. [ 178.609693] input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0458:0186.000A/input/input21 [ 178.610470] hid-generic 0003:0458:0186.000A: input,hidraw2: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:1a.0-1.2/input0 [ 178.610523] usbhid 1-1.2:1.1: couldn't find an input interrupt endpoint [ 188.475331] usb 1-1-port2: disabled by hub (EMI?), re-enabling... [ 188.475338] usb 1-1.2: USB disconnect, device number 12 [ 188.733752] usb 1-1.2: new low-speed USB device number 13 using ehci-pci [ 188.847456] usb 1-1.2: New USB device found, idVendor=0458, idProduct=0186 [ 188.847459] usb 1-1.2: New USB device strings: Mfr=4, Product=40, SerialNumber=0 [ 188.847460] usb 1-1.2: Product: Wired Mouse [ 188.847461] usb 1-1.2: Manufacturer: KYE SYSTEMS CORP. [ 188.850178] input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0458:0186.000B/input/input22 [ 188.850319] hid-generic 0003:0458:0186.000B: input,hidraw2: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:1a.0-1.2/input0 [ 188.850389] usbhid 1-1.2:1.1: couldn't find an input interrupt endpoint [ 269.114945] usb 1-1-port2: disabled by hub (EMI?), re-enabling... [ 269.114952] usb 1-1.2: USB disconnect, device number 13 [ 269.369860] usb 1-1.2: new low-speed USB device number 14 using ehci-pci [ 269.483568] usb 1-1.2: New USB device found, idVendor=0458, idProduct=0186 [ 269.483570] usb 1-1.2: New USB device strings: Mfr=4, Product=40, SerialNumber=0 [ 269.483571] usb 1-1.2: Product: Wired Mouse [ 269.483572] usb 1-1.2: Manufacturer: KYE SYSTEMS CORP. [ 269.486520] input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0458:0186.000C/input/input23 [ 269.486903] hid-generic 0003:0458:0186.000C: input,hidraw2: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:1a.0-1.2/input0 [ 269.486951] usbhid 1-1.2:1.1: couldn't find an input interrupt endpoint [ 285.242866] usb 1-1-port2: disabled by hub (EMI?), re-enabling... [ 285.242873] usb 1-1.2: USB disconnect, device number 14 [ 285.501878] usb 1-1.2: new low-speed USB device number 15 using ehci-pci [ 285.615245] usb 1-1.2: New USB device found, idVendor=0458, idProduct=0186 [ 285.615247] usb 1-1.2: New USB device strings: Mfr=4, Product=40, SerialNumber=0 [ 285.615248] usb 1-1.2: Product: Wired Mouse [ 285.615249] usb 1-1.2: Manufacturer: KYE SYSTEMS CORP. [ 285.618087] input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0458:0186.000D/input/input24 [ 285.618188] hid-generic 0003:0458:0186.000D: input,hidraw2: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:1a.0-1.2/input0 [ 285.618235] usbhid 1-1.2:1.1: couldn't find an input interrupt endpoint [ 291.130839] usb 1-1-port2: disabled by hub (EMI?), re-enabling... [ 291.130845] usb 1-1.2: USB disconnect, device number 15 [ 291.393889] usb 1-1.2: new low-speed USB device number 16 using ehci-pci [ 291.507348] usb 1-1.2: New USB device found, idVendor=0458, idProduct=0186 [ 291.507351] usb 1-1.2: New USB device strings: Mfr=4, Product=40, SerialNumber=0 [ 291.507352] usb 1-1.2: Product: Wired Mouse [ 291.507353] usb 1-1.2: Manufacturer: KYE SYSTEMS CORP. [ 291.510086] input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0458:0186.000E/input/input25 [ 291.510227] hid-generic 0003:0458:0186.000E: input,hidraw2: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:1a.0-1.2/input0 [ 291.510275] usbhid 1-1.2:1.1: couldn't find an input interrupt endpoint