['halcmd', 'loadusr', '-Wn', 'gladevcp', 'gladevcp', '-c', 'gladevcp', '-d', '-x', '48234639', '-u', './lzpanel.py', './lzpanel.ui']
[GladeVCP][INFO]  Logging to: /home/rmann/gladevcp.log (logger.py:106)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No PROGRAM_PREFIX Entry in DISPLAY, Using: ~/linuxcnc/nc_files (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  Path not valid in INI File [DISPLAY] PROGRAM_PREFIX section (qt_istat.py:96)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  filter Extension Parsing Error: 'NoneType' object is not iterable
 Using Default: ALL (*) (qt_istat.py:631)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  Valid Extension Parsing Error: 'NoneType' object is not iterable
 Using Default: * (qt_istat.py:615)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  Missing [DISPLAY] LINEAR_INCREMENTS- using defaults. (qt_istat.py:303)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  Missing [DISPLAY] ANGULAR_INCREMENTS- using defaults. (qt_istat.py:317)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MIN_LINEAR_VELOCITY Entry in DISPLAY, Using: 0 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MAX_LINEAR_VELOCITY Entry in DISPLAY, Using: 125 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MIN_ANGULAR_VELOCITY Entry in DISPLAY, Using: 0 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MAX_ANGULAR_VELOCITY Entry in DISPLAY, Using: 60 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][WARNING]  INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:532)
[GladeVCP][DEBUG]  **** GLADE VCP INFO:    Not a builder project, trying to load as a lib glade project (gladevcp:205)
gtk-builder-error-quark: ./lzpanel.ui:88:38 Invalid property: HAL_HideTable.n_rows (11)
**** GLADE VCP ERROR:    With xml file: ./lzpanel.ui : 'gi.repository.Gtk' object has no attribute 'glade'
<commandline>:0: gladevcp exited without becoming ready
Embeded tab command "halcmd loadusr -Wn gladevcp gladevcp -c gladevcp -d -x 48234639 -u ./lzpanel.py ./lzpanel.ui" exited with error: 1
Shutting down and cleaning up LinuxCNC...
task: 136 cycles, min=0.000008, max=0.011383, avg=0.008801, 0 latency excursions (> 10x expected cycle time of 0.010000s)
shuttle: exiting
hm2_eth: in hm2_eth_reset
hm2_eth: HostMot2 ethernet driver unloaded
hm2: unloading
Note: Using POSIX realtime
LinuxCNC terminated with an error.  You can find more information in the log:
    /home/rmann/linuxcnc_debug.txt
and
    /home/rmann/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal