Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.8.2-11-g6a3d0a434 Machine configuration directory is '/home/cnc/linuxcnc/configs/CNC' Machine configuration file is 'CNC.ini' INIFILE=/home/cnc/linuxcnc/configs/CNC/CNC.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=XYYZ KINEMATICS=trivkins coordinates=XYYZ kinstype=BOTH Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui Found file(REL): ./CNC.hal Found file(REL): ./custom.hal Starting TASK program: milltask Starting DISPLAY program: axis Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 85 cycles, min=0.000065, max=0.010147, avg=0.008316, 0 latency excursions (> 10x expected cycle time of 0.010000s) hm2: loading Mesa HostMot2 driver version 0.15 hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 hm2_pci: discovered 5i25 at 0000:05:00.0 hm2/hm2_5i25.0: Low Level init 0.15 hm2/hm2_5i25.0: Smart Serial Firmware Version 43 Board hm2_5i25.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_5i25.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_5i25.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_5i25.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_5i25.0: 34 I/O Pins used: hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output) hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output) hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output) hm2/hm2_5i25.0: IO Pin 006 (P3-04): StepGen #3, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 007 (P3-17): StepGen #3, pin Step (Output) hm2/hm2_5i25.0: IO Pin 008 (P3-05): StepGen #4, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 009 (P3-06): StepGen #4, pin Step (Output) hm2/hm2_5i25.0: IO Pin 010 (P3-07): Smart Serial Interface #0, pin tx0 (Output) hm2/hm2_5i25.0: IO Pin 011 (P3-08): Smart Serial Interface #0, pin rx0 (Input) hm2/hm2_5i25.0: IO Pin 012 (P3-09): IOPort hm2/hm2_5i25.0: IO Pin 013 (P3-10): IOPort hm2/hm2_5i25.0: IO Pin 014 (P3-11): Encoder #0, pin Index (Input) hm2/hm2_5i25.0: IO Pin 015 (P3-12): Encoder #0, pin B (Input) hm2/hm2_5i25.0: IO Pin 016 (P3-13): Encoder #0, pin A (Input) hm2/hm2_5i25.0: IO Pin 017 (P2-01): IOPort hm2/hm2_5i25.0: IO Pin 018 (P2-14): IOPort hm2/hm2_5i25.0: IO Pin 019 (P2-02): IOPort hm2/hm2_5i25.0: IO Pin 020 (P2-15): IOPort hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort hm2/hm2_5i25.0: registered hm2_5i25.0: initialized AnyIO board at 0000:05:00.0 hm2_5i25.0: dropping AnyIO board at 0000:05:00.0 hm2/hm2_5i25.0: unregistered hm2_pci: driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime note: MAXV max: 70.000 units/sec 4200.000 units/min note: LJOG max: 70.000 units/sec 4200.000 units/min note: LJOG default: 70.000 units/sec 4200.000 units/min Traceback (most recent call last): File "/usr/bin/axis", line 3554, in duplicate_coord_letters) UnicodeEncodeError: 'ascii' codec can't encode character u'\xe1' in position 21: ordinal not in range(128) 3314 3346 Stopping realtime threads Unloading hal components RTAPI_PCI: Unmapped 65536 bytes at 0x7f62890ed000 Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: mar nov 9 13:13:45 CET 2021 UTC Date: mar nov 9 12:13:45 UTC 2021 this program: /usr/bin/linuxcnc_info uptime: 13:13:45 up 30 min, 1 user, load average: 1,06, 0,99, 0,87 lsb_release -sa: Debian Debian GNU/Linux 10 (buster) 10 buster which linuxcnc: /usr/bin/linuxcnc pwd: /home/cnc/linuxcnc/configs/CNC USER: cnc LOGNAME: cnc HOME: /home/cnc EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1440x900 pixels (381x238 millimeters) PATH: /usr/bin:/home/cnc/linuxcnc/configs/CNC/bin:/usr/bin:/home/cnc/.local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: cnc-maquina kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Debian 4.19.208-1 (2021-09-29) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/vmlinuz-4.19.0-18-rt-amd64 root=/dev/mapper/cnc--maquina--vg-root ro initrd=/install/gtk/initrd.gz quiet model name: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz cores: 2 cpu MHz: 1877.056 parport: serial: 0000-0000 : serial Versions: gcc: gcc (Debian 8.3.0-6) 8.3.0 python: Python 2.7.16 git: git version 2.20.1 git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.8.2-11-g6a3d0a434 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /etc/init.d/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib dpkg -l '*linuxcnc*': Deseado=desconocido(U)/Instalar/eliminaR/Purgar/retener(H) | Estado=No/Inst/ficheros-Conf/desempaqUetado/medio-conF/medio-inst(H)/espera-disparo(W)/pendienTe-disparo |/ Err?=(ninguno)/requiere-Reinst (Estado,Err: mayúsc.=malo) ||/ Nombre Versión Arquitectura Descripción +++-===================-=====================-============-===================================================================== un linuxcnc (no hay ninguna descripción disponible) un linuxcnc-dev (no hay ninguna descripción disponible) un linuxcnc-doc (no hay ninguna descripción disponible) ii linuxcnc-doc-en 1:2.8.2.11.g6a3d0a434 all motion controller for CNC machines and robots (English documentation) ii linuxcnc-doc-es 1:2.8.2.11.g6a3d0a434 all controlador de movimiento para máquinas CNC y robots (Español). ii linuxcnc-doc-fr 1:2.8.2.11.g6a3d0a434 all motion controller for CNC machines and robots (French documentation) un linuxcnc-sim (no hay ninguna descripción disponible) un linuxcnc-sim-dev (no hay ninguna descripción disponible) ii linuxcnc-uspace 1:2.8.2.11.g6a3d0a434 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.8.2.11.g6a3d0a434 amd64 PC based motion controller for real-time Linux