; New Bracket.tap   22/03/2020   23:15:10
; postprocessor: NewLinuxCNC_Post.scpost
;
 G20 (units: inches)
 G40 (cutter compensation: off)
 G90 (distance mode: absolute)
 M52 P1 (adaptive feed: on)
 G64 P0.01 Q0.001 (tracking tolerances: 0.01")
 F#<_hal[plasmac.cut-feed-rate]>
;
 M190 P1 (1/8 steel material)
 M66 P3 L3 Q2  (wait for valid change)
;
 F#<_hal[plasmac.cut-feed-rate]>
;
 (start 2 inch square tube shelf bracket #1 torch, 0.70")
 G0 X0.33219 Y0.31750
 M3 $0  S1
 G1 X0.33219 Y0.27750
 G1 X0.33219 Y0.21750
 G3 X0.33219 Y0.21750 I0.00000 J0.09500
 M5
 (end 2 inch square tube shelf bracket #1  torch)
;
 (start 2 inch square tube shelf bracket #2 torch, 0.70")
 G0 X2.58219 Y0.31750
 M3 $0  S1
 G1 X2.58219 Y0.27750
 G1 X2.58219 Y0.21750
 G3 X2.58219 Y0.21750 I0.00000 J0.09500
 M5
 (end 2 inch square tube shelf bracket #2  torch)
;
 (start 2 inch square tube shelf bracket #3 torch, 0.70")
 G0 X2.58219 Y2.56750
 M3 $0  S1
 G1 X2.58219 Y2.52750
 G1 X2.58219 Y2.46750
 G3 X2.58219 Y2.46750 I0.00000 J0.09500
 M5
 (end 2 inch square tube shelf bracket #3  torch)
;
 (start 2 inch square tube shelf bracket #4 torch, 0.70")
 G0 X2.56250 Y3.36413
 M3 $0  S1
 G1 X2.56250 Y3.32413
 G1 X2.56250 Y3.26413
 G3 X2.56250 Y3.26413 I0.00000 J0.09500
 M5
 (end 2 inch square tube shelf bracket #4  torch)
;
 (start 2 inch square tube shelf bracket #5 torch, 0.70")
 G0 X0.31250 Y3.36413
 M3 $0  S1
 G1 X0.31250 Y3.32413
 G1 X0.31250 Y3.26413
 G3 X0.31250 Y3.26413 I0.00000 J0.09500
 M5
 (end 2 inch square tube shelf bracket #5  torch)
;
 (start 2 inch square tube shelf bracket #6 torch, 0.70")
 G0 X0.33219 Y2.56750
 M3 $0  S1
 G1 X0.33219 Y2.52750
 G1 X0.33219 Y2.46750
 G3 X0.33219 Y2.46750 I0.00000 J0.09500
 M5
 (end 2 inch square tube shelf bracket #6  torch)
;
 (start 2 inch square tube shelf bracket #7 torch, 0.70")
 G0 X0.31250 Y5.61413
 M3 $0  S1
 G1 X0.31250 Y5.57413
 G1 X0.31250 Y5.51413
 G3 X0.31250 Y5.51413 I0.00000 J0.09500
 M5
 (end 2 inch square tube shelf bracket #7  torch)
;
 (start 2 inch square tube shelf bracket #8 torch, 0.70")
 G0 X2.56250 Y5.61413
 M3 $0  S1
 G1 X2.56250 Y5.57413
 G1 X2.56250 Y5.51413
 G3 X2.56250 Y5.51413 I0.00000 J0.09500
 M5
 (end 2 inch square tube shelf bracket #8  torch)
;
 (start 2 inch square tube shelf bracket #9 torch, 11.93")
 G0 X-0.06598 Y2.66644
 M3 $0  S1
 G3 X-0.02682 Y2.66255 I0.02560 J0.05866
 G3 X0.01828 Y2.69950 I-0.01356 J0.06255
 G2 X0.63761 Y2.71750 I0.31391 J-0.13700
 G1 X2.27677 Y2.71750
 G2 X2.73719 Y2.25708 I0.30542 J-0.15500
 G1 X2.73719 Y0.61792
 G2 X2.27677 Y0.15750 I-0.15500 J-0.30542
 G1 X0.63761 Y0.15750
 G2 X0.17719 Y0.61792 I-0.30542 J0.15500
 G1 X0.17719 Y2.25708
 G2 X0.01828 Y2.69950 I0.15500 J0.30542
 G3 X-0.01478 Y2.78376 I-0.05866 J0.02560
 M5
 (end 2 inch square tube shelf bracket #9  torch)
;
 (start 2 inch square tube shelf bracket #10 torch, 16.05")
 G0 X2.62650 Y2.95263
 M3 $0  S1
 G3 X2.61440 Y2.99008 I-0.06400 J0.00000
 G3 X2.56250 Y3.01663 I-0.05190 J-0.03745
 G2 X2.25708 Y3.20413 I-0.00000 J0.34250
 G1 X0.61792 Y3.20413
 G2 X0.15750 Y3.66455 I-0.30542 J0.15500
 G1 X0.15750 Y5.30371
 G2 X0.15750 Y5.91455 I0.15500 J0.30542
 G1 X0.15750 Y7.89554
 G2 X0.43750 Y8.17554 I0.28000 J-0.00000
 G1 X2.43750 Y8.17554
 G2 X2.71750 Y7.89554 I0.00000 J-0.28000
 G1 X2.71750 Y5.91455
 G2 X2.71750 Y5.30371 I-0.15500 J-0.30542
 G1 X2.71750 Y3.66455
 G2 X2.56250 Y3.01663 I-0.15500 J-0.30542
 G3 X2.49850 Y2.95263 I0.00000 J-0.06400
 M5
 (end 2 inch square tube shelf bracket #10  torch)
;
(Pierces = 10)
(Cuts = 10   Length = 33.56")
;
 G40 (cutter compensation: off)
 G90 (distance mode: absolute)
 M5 (plasmac stop)
 M30 (end program)