stefano@stefano:~$ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4-9-rtai-686-pae (Debian 3.4.55-4linuxcnc) () (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Debian 3.4.55-4linuxcnc [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved) [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable) [ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved) [ 0.000000] BIOS-e820: 0000000040005000 - 00000000d1fb7000 (usable) [ 0.000000] BIOS-e820: 00000000d1fb7000 - 00000000d1ffa000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000d1ffa000 - 00000000d6f0a000 (usable) [ 0.000000] BIOS-e820: 00000000d6f0a000 - 00000000d7000000 (reserved) [ 0.000000] BIOS-e820: 00000000d7000000 - 00000000d7756000 (usable) [ 0.000000] BIOS-e820: 00000000d7756000 - 00000000d7800000 (reserved) [ 0.000000] BIOS-e820: 00000000d7800000 - 00000000d7fb4000 (usable) [ 0.000000] BIOS-e820: 00000000d7fb4000 - 00000000d8000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000d8000000 - 00000000d971f000 (usable) [ 0.000000] BIOS-e820: 00000000d971f000 - 00000000d9800000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000d9800000 - 00000000dae02000 (usable) [ 0.000000] BIOS-e820: 00000000dae02000 - 00000000dfa00000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000011e600000 (usable) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. OptiPlex 7010/0GXM1W, BIOS A25 05/10/2017 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xdae02 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 5 base 11F000000 mask FFF000000 uncachable [ 0.000000] 6 base 11E800000 mask FFF800000 uncachable [ 0.000000] 7 base 11E600000 mask FFFE00000 uncachable [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] found SMP MP-table at [c00fd980] fd980 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x017f8000-0x017fffff] [ 0.000000] RAMDISK: 3641c000 - 37206000 [ 0.000000] ACPI: RSDP 000f0490 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT d7ff3080 0007C (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FACP d7ffd260 0010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT d7ff3188 0A0D6 (v02 DELL CBX3 00000022 INTL 20091112) [ 0.000000] ACPI: FACS d97fe080 00040 [ 0.000000] ACPI: APIC d7ffd370 00072 (v03 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT d7ffd3e8 00044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG d7ffd430 0003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET d7ffd470 00038 (v01 DELL CBX3 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT d7ffd4a8 00415 (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT d7ffd8c0 009B9 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT d7ffe280 00B22 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: DMAR d7ffeda8 000B8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: ASF! d7ffee60 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: SLIC d7ffef08 00176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2614MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000dae02 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] 0: 0x00020200 -> 0x00040004 [ 0.000000] 0: 0x00040005 -> 0x000d1fb7 [ 0.000000] 0: 0x000d1ffa -> 0x000d6f0a [ 0.000000] 0: 0x000d7000 -> 0x000d7756 [ 0.000000] 0: 0x000d7800 -> 0x000d7fb4 [ 0.000000] 0: 0x000d8000 -> 0x000d971f [ 0.000000] 0: 0x000d9800 -> 0x000dae02 [ 0.000000] On node 0 totalpages: 895102 [ 0.000000] free_area_init_node: node 0, pgdat c1498a00, node_mem_map f48bc200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 220974 pages, LIFO batch:31 [ 0.000000] HighMem zone: 5229 pages used for memmap [ 0.000000] HighMem zone: 663174 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 17 pages/cpu @f77a7000 s48384 r0 d21248 u69632 [ 0.000000] pcpu-alloc: s48384 r0 d21248 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 888097 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-9-rtai-686-pae root=UUID=200dd09d-d8c2-4343-8b59-12bf3abd1721 ro initrd=/install/gtk/initrd.gz lapic quiet rootdelay=5 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] allocated 7171984 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000dae02) [ 0.000000] Memory: 3524108k/3586056k available (3495k kernel code, 56300k reserved, 1237k data, 416k init, 2673612k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc14a0000 - 0xc1508000 ( 416 kB) [ 0.000000] .data : 0xc1369d4a - 0xc149f480 (1237 kB) [ 0.000000] .text : 0xc1000000 - 0xc1369d4a (3495 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f3c06000 soft=f3c08000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Interrupt pipeline (release #3) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 3192.727 MHz processor. [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.45 BogoMIPS (lpj=12770908) [ 0.000003] pid_max: default: 32768 minimum: 301 [ 0.000029] Security Framework initialized [ 0.000032] AppArmor: AppArmor disabled by boot time parameter [ 0.000042] Mount-cache hash table entries: 512 [ 0.000157] Initializing cgroup subsys cpuacct [ 0.000158] Initializing cgroup subsys memory [ 0.000162] Initializing cgroup subsys devices [ 0.000163] Initializing cgroup subsys freezer [ 0.000164] Initializing cgroup subsys net_cls [ 0.000166] Initializing cgroup subsys blkio [ 0.000169] Initializing cgroup subsys perf_event [ 0.000187] CPU: Physical Processor ID: 0 [ 0.000188] CPU: Processor Core ID: 0 [ 0.000191] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.000192] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000747] mce: CPU supports 9 MCE banks [ 0.000757] CPU0: Thermal monitoring enabled (TM1) [ 0.000829] ACPI: Core revision 20120320 [ 0.005690] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.006109] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.045703] CPU0: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz stepping 09 [ 0.152670] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver. [ 0.152676] ... version: 3 [ 0.152677] ... bit width: 48 [ 0.152678] ... generic registers: 8 [ 0.152679] ... value mask: 0000ffffffffffff [ 0.152680] ... max period: 000000007fffffff [ 0.152681] ... fixed-purpose events: 3 [ 0.152682] ... event mask: 00000007000000ff [ 0.164695] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.176634] CPU 1 irqstacks, hard=f3cf6000 soft=f3cf8000 [ 0.176637] Booting Node 0, Processors #1 [ 0.186909] Initializing CPU#1 [ 0.190352] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.196592] CPU 2 irqstacks, hard=f3d08000 soft=f3d0a000 [ 0.196595] #2 [ 0.206797] Initializing CPU#2 [ 0.210306] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.216547] CPU 3 irqstacks, hard=f3d1c000 soft=f3d1e000 [ 0.216549] #3 Ok. [ 0.226751] Initializing CPU#3 [ 0.230260] NMI watchdog: enabled, takes one hw-pmu counter. [ 0.230283] Brought up 4 CPUs [ 0.230285] Total of 4 processors activated (25541.81 BogoMIPS). [ 0.232547] devtmpfs: initialized [ 0.232697] PM: Registering ACPI NVS region [mem 0xd1fb7000-0xd1ff9fff] (274432 bytes) [ 0.232704] PM: Registering ACPI NVS region [mem 0xd971f000-0xd97fffff] (921600 bytes) [ 0.232780] dummy: [ 0.232818] NET: Registered protocol family 16 [ 0.232896] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.232897] ACPI: bus type pci registered [ 0.232933] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.232936] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.232937] PCI: Using MMCONFIG for extended config space [ 0.232938] PCI: Using configuration type 1 for base access [ 0.232945] dmi type 0xB1 record - unknown flag [ 0.233334] bio: create slab at 0 [ 0.233395] ACPI: Added _OSI(Module Device) [ 0.233397] ACPI: Added _OSI(Processor Device) [ 0.233398] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.233400] ACPI: Added _OSI(Processor Aggregator Device) [ 0.234989] ACPI: EC: Look up EC in DSDT [ 0.236683] ACPI: Executed 1 blocks of module-level executable AML code [ 0.239980] ACPI: SSDT dafa7018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.240398] ACPI: Dynamic OEM Table Load: [ 0.240400] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.240642] ACPI: SSDT dafa8a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.241092] ACPI: Dynamic OEM Table Load: [ 0.241094] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.241209] ACPI: SSDT dafaec18 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.241623] ACPI: Dynamic OEM Table Load: [ 0.241625] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.242155] ACPI: Interpreter enabled [ 0.242161] ACPI: (supports S0 S3 S4 S5) [ 0.242180] ACPI: Using IOAPIC for interrupt routing [ 0.248170] ACPI: No dock devices found. [ 0.248174] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.248468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.248878] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.248880] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.248882] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.248884] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.248885] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.248887] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] [ 0.248888] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] [ 0.248890] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] [ 0.248892] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff] [ 0.248914] PCI host bridge to bus 0000:00 [ 0.248916] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.248917] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.248919] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.248920] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.248922] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.248923] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.248925] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.248926] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.248928] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.248936] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.248965] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000 [ 0.248974] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.248980] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.248984] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f] [ 0.249027] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.249049] pci 0000:00:14.0: reg 10: [mem 0xf7d20000-0xf7d2ffff 64bit] [ 0.249105] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.249127] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.249150] pci 0000:00:16.0: reg 10: [mem 0xf7d3c000-0xf7d3c00f 64bit] [ 0.249210] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.249241] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.249259] pci 0000:00:19.0: reg 10: [mem 0xf7d00000-0xf7d1ffff] [ 0.249267] pci 0000:00:19.0: reg 14: [mem 0xf7d39000-0xf7d39fff] [ 0.249276] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f] [ 0.249325] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.249349] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.249370] pci 0000:00:1a.0: reg 10: [mem 0xf7d38000-0xf7d383ff] [ 0.249441] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.249467] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.249482] pci 0000:00:1b.0: reg 10: [mem 0xf7d30000-0xf7d33fff 64bit] [ 0.249535] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.249561] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.249662] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.249699] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 [ 0.249759] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.249791] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.249811] pci 0000:00:1d.0: reg 10: [mem 0xf7d37000-0xf7d373ff] [ 0.249883] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.249908] pci 0000:00:1f.0: [8086:1e47] type 00 class 0x060100 [ 0.250019] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.250037] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7] [ 0.250045] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3] [ 0.250053] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7] [ 0.250061] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3] [ 0.250069] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f] [ 0.250078] pci 0000:00:1f.2: reg 24: [mem 0xf7d36000-0xf7d367ff] [ 0.250109] pci 0000:00:1f.2: PME# supported from D3hot [ 0.250128] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.250143] pci 0000:00:1f.3: reg 10: [mem 0xf7d35000-0xf7d350ff 64bit] [ 0.250163] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f] [ 0.250261] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.250476] pci 0000:02:00.0: [9710:9900] type 00 class 0x070103 [ 0.250661] pci 0000:02:00.0: reg 10: [io 0xe010-0xe017] [ 0.250744] pci 0000:02:00.0: reg 14: [io 0xe000-0xe007] [ 0.250896] pci 0000:02:00.0: reg 18: [mem 0xf7c01000-0xf7c01fff] [ 0.251197] pci 0000:02:00.0: reg 24: [mem 0xf7c00000-0xf7c00fff] [ 0.251724] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.274262] pci 0000:00:1c.4: PCI bridge to [bus 02-02] [ 0.274267] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.274271] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.274290] pci_bus 0000:00: on NUMA node 0 [ 0.274292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.274460] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.274498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.274627] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f) [ 0.278563] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.278605] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.278646] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.278686] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.278726] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.278765] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.278805] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.278845] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.278898] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.278903] vgaarb: loaded [ 0.278904] vgaarb: bridge control possible 0000:00:02.0 [ 0.278921] PCI: Using ACPI for IRQ routing [ 0.280410] PCI: pci_cache_line_size set to 64 bytes [ 0.280481] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.280482] reserve RAM buffer: 0000000040004000 - 0000000043ffffff [ 0.280484] reserve RAM buffer: 00000000d1fb7000 - 00000000d3ffffff [ 0.280485] reserve RAM buffer: 00000000d6f0a000 - 00000000d7ffffff [ 0.280487] reserve RAM buffer: 00000000d7756000 - 00000000d7ffffff [ 0.280489] reserve RAM buffer: 00000000d7fb4000 - 00000000d7ffffff [ 0.280490] reserve RAM buffer: 00000000d971f000 - 00000000dbffffff [ 0.280492] reserve RAM buffer: 00000000dae02000 - 00000000dbffffff [ 0.280577] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.280583] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.282593] Switching to clocksource hpet [ 0.282636] pnp: PnP ACPI init [ 0.282642] ACPI: bus type pnp registered [ 0.282865] pnp 00:00: [bus 00-3e] [ 0.282867] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.282869] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.282870] pnp 00:00: [io 0x0d00-0xffff window] [ 0.282872] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.282873] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.282875] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.282876] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.282878] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.282879] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.282880] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.282882] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.282883] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.282886] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.282887] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.282889] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.282890] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.282891] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.282893] pnp 00:00: [mem 0xdfa00000-0xfeafffff window] [ 0.282894] pnp 00:00: [mem 0x00010000-0x0001ffff window] [ 0.282928] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.282946] pnp 00:01: [mem 0xfed40000-0xfed44fff] [ 0.282968] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.282970] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.282978] pnp 00:02: [io 0x0000-0x001f] [ 0.282980] pnp 00:02: [io 0x0081-0x0091] [ 0.282981] pnp 00:02: [io 0x0093-0x009f] [ 0.282982] pnp 00:02: [io 0x00c0-0x00df] [ 0.282984] pnp 00:02: [dma 4] [ 0.282996] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.283002] pnp 00:03: [mem 0xff000000-0xffffffff] [ 0.283015] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.283069] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.283083] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.283092] pnp 00:05: [io 0x002e-0x002f] [ 0.283093] pnp 00:05: [io 0x004e-0x004f] [ 0.283094] pnp 00:05: [io 0x0061] [ 0.283096] pnp 00:05: [io 0x0063] [ 0.283097] pnp 00:05: [io 0x0065] [ 0.283098] pnp 00:05: [io 0x0067] [ 0.283099] pnp 00:05: [io 0x0070] [ 0.283100] pnp 00:05: [io 0x0080] [ 0.283102] pnp 00:05: [io 0x0092] [ 0.283103] pnp 00:05: [io 0x00b2-0x00b3] [ 0.283104] pnp 00:05: [io 0x0680-0x069f] [ 0.283106] pnp 00:05: [io 0x1000-0x100f] [ 0.283107] pnp 00:05: [io 0xffff] [ 0.283108] pnp 00:05: [io 0xffff] [ 0.283109] pnp 00:05: [io 0x0400-0x0453] [ 0.283111] pnp 00:05: [io 0x0458-0x047f] [ 0.283112] pnp 00:05: [io 0x0500-0x057f] [ 0.283113] pnp 00:05: [io 0x164e-0x164f] [ 0.283138] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.283140] system 00:05: [io 0x1000-0x100f] has been reserved [ 0.283142] system 00:05: [io 0xffff] has been reserved [ 0.283143] system 00:05: [io 0xffff] has been reserved [ 0.283145] system 00:05: [io 0x0400-0x0453] has been reserved [ 0.283147] system 00:05: [io 0x0458-0x047f] has been reserved [ 0.283148] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.283150] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.283152] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.283158] pnp 00:06: [io 0x0070-0x0077] [ 0.283164] pnp 00:06: [irq 8] [ 0.283177] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.283197] pnp 00:07: [io 0x0454-0x0457] [ 0.283219] system 00:07: [io 0x0454-0x0457] has been reserved [ 0.283221] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.283282] pnp 00:08: [io 0x0000-0xffffffff disabled] [ 0.283283] pnp 00:08: [io 0x0a40-0x0a4f] [ 0.283284] pnp 00:08: [io 0x0a00-0x0a3f] [ 0.283307] system 00:08: [io 0x0a40-0x0a4f] has been reserved [ 0.283308] system 00:08: [io 0x0a00-0x0a3f] has been reserved [ 0.283310] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.283326] pnp 00:09: [io 0x0010-0x001f] [ 0.283328] pnp 00:09: [io 0x0022-0x003f] [ 0.283329] pnp 00:09: [io 0x0044-0x005f] [ 0.283330] pnp 00:09: [io 0x0062-0x0063] [ 0.283332] pnp 00:09: [io 0x0065-0x006f] [ 0.283333] pnp 00:09: [io 0x0072-0x007f] [ 0.283334] pnp 00:09: [io 0x0080] [ 0.283335] pnp 00:09: [io 0x0084-0x0086] [ 0.283337] pnp 00:09: [io 0x0088] [ 0.283338] pnp 00:09: [io 0x008c-0x008e] [ 0.283339] pnp 00:09: [io 0x0090-0x009f] [ 0.283341] pnp 00:09: [io 0x00a2-0x00bf] [ 0.283342] pnp 00:09: [io 0x00e0-0x00ef] [ 0.283343] pnp 00:09: [io 0x04d0-0x04d1] [ 0.283367] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.283369] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.283375] pnp 00:0a: [io 0x00f0-0x00ff] [ 0.283379] pnp 00:0a: [irq 13] [ 0.283394] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.284256] pnp 00:0b: [io 0x03f8-0x03ff] [ 0.284261] pnp 00:0b: [irq 4] [ 0.284262] pnp 00:0b: [dma 0 disabled] [ 0.284296] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.284484] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff] [ 0.284486] pnp 00:0c: [mem 0xfed10000-0xfed17fff] [ 0.284487] pnp 00:0c: [mem 0xfed18000-0xfed18fff] [ 0.284488] pnp 00:0c: [mem 0xfed19000-0xfed19fff] [ 0.284490] pnp 00:0c: [mem 0xf8000000-0xfbffffff] [ 0.284491] pnp 00:0c: [mem 0xfed20000-0xfed3ffff] [ 0.284493] pnp 00:0c: [mem 0xfed90000-0xfed93fff] [ 0.284494] pnp 00:0c: [mem 0xfed45000-0xfed8ffff] [ 0.284496] pnp 00:0c: [mem 0xff000000-0xffffffff] [ 0.284497] pnp 00:0c: [mem 0xfee00000-0xfeefffff] [ 0.284498] pnp 00:0c: [mem 0xdfa00000-0xdfa00fff] [ 0.284538] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.284540] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.284542] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.284544] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.284545] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.284547] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.284549] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.284551] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.284553] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved [ 0.284555] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.284557] system 00:0c: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 0.284559] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.284676] pnp 00:0d: [mem 0x20000000-0x201fffff] [ 0.284677] pnp 00:0d: [mem 0x40004000-0x40004fff] [ 0.284716] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved [ 0.284717] system 00:0d: [mem 0x40004000-0x40004fff] has been reserved [ 0.284719] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.284733] pnp: PnP ACPI: found 14 devices [ 0.284734] ACPI: ACPI bus type pnp unregistered [ 0.284736] PnPBIOS: Disabled by ACPI PNP [ 0.320484] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.320502] pci 0000:00:1c.4: PCI bridge to [bus 02-02] [ 0.320505] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff] [ 0.320510] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.320539] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.320540] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.320542] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.320544] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.320545] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.320547] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff] [ 0.320548] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff] [ 0.320550] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff] [ 0.320551] pci_bus 0000:00: resource 12 [mem 0xdfa00000-0xfeafffff] [ 0.320553] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.320555] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.320617] NET: Registered protocol family 2 [ 0.320655] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.320767] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.320896] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.320953] TCP: Hash tables configured (established 131072 bind 65536) [ 0.320955] TCP: reno registered [ 0.320956] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.320959] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.321012] NET: Registered protocol family 1 [ 0.321019] pci 0000:00:02.0: Boot video device [ 0.321029] pci 0000:00:14.0: power state changed by ACPI to D0 [ 0.321032] pci 0000:00:14.0: power state changed by ACPI to D0 [ 0.362462] PCI: CLS 64 bytes, default 64 [ 0.362499] Unpacking initramfs... [ 0.559617] Freeing initrd memory: 14248k freed [ 0.561280] audit: initializing netlink socket (disabled) [ 0.561288] type=2000 audit(1582108449.452:1): initialized [ 0.570149] highmem bounce pool size: 64 pages [ 0.570153] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.570312] VFS: Disk quotas dquot_6.5.2 [ 0.570331] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.570377] msgmni has been set to 1688 [ 0.570492] alg: No test for stdrng (krng) [ 0.570513] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.570515] io scheduler noop registered [ 0.570516] io scheduler deadline registered [ 0.570534] io scheduler cfq registered (default) [ 0.570688] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.570700] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.570701] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.571025] GHES: HEST is not enabled! [ 0.571032] isapnp: Scanning for PnP cards... [ 0.924234] isapnp: No Plug & Play device found [ 0.924262] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.944896] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.965746] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.965926] Linux agpgart interface v0.103 [ 0.965991] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset [ 0.966046] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.966871] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.966958] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.967046] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.969922] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.969940] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.970013] mousedev: PS/2 mouse device common for all mice [ 0.970046] rtc_cmos 00:06: RTC can wake from S4 [ 0.970155] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.970181] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.970266] TCP: cubic registered [ 0.970320] NET: Registered protocol family 10 [ 0.970458] Mobile IPv6 [ 0.970460] NET: Registered protocol family 17 [ 0.970462] Registering the dns_resolver key type [ 0.970497] Using IPI No-Shortcut mode [ 0.970565] PM: Hibernation image not present or could not be loaded. [ 0.970572] registered taskstats version 1 [ 0.971006] rtc_cmos 00:06: setting system clock to 2020-02-19 10:34:10 UTC (1582108450) [ 0.971085] Freeing unused kernel memory: 416k freed [ 0.971175] Write protecting the kernel text: 3496k [ 0.971191] Write protecting the kernel read-only data: 984k [ 0.978323] udevd[57]: starting version 175 [ 0.988383] e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k [ 0.988386] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 0.988422] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.988478] e1000e 0000:00:19.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 0.989141] SCSI subsystem initialized [ 0.991892] usbcore: registered new interface driver usbfs [ 0.991907] usbcore: registered new interface driver hub [ 0.993004] libata version 3.00 loaded. [ 0.996164] usbcore: registered new device driver usb [ 0.996404] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.005333] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x19 [ 1.011987] microcode: CPU0 updated to revision 0x1b, date = 2014-05-29 [ 1.011997] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x19 [ 1.013602] microcode: CPU1 updated to revision 0x1b, date = 2014-05-29 [ 1.013610] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x19 [ 1.015181] microcode: CPU2 updated to revision 0x1b, date = 2014-05-29 [ 1.015189] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x19 [ 1.016712] microcode: CPU3 updated to revision 0x1b, date = 2014-05-29 [ 1.016741] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.305825] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 90:b1:1c:7b:6f:9b [ 1.305828] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.305884] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1011FF-0FF [ 1.305900] ahci 0000:00:1f.2: version 3.0 [ 1.305980] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 1.305983] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.305987] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.312628] scsi0 : ahci [ 1.312709] scsi1 : ahci [ 1.312758] scsi2 : ahci [ 1.312807] scsi3 : ahci [ 1.312855] scsi4 : ahci [ 1.312902] scsi5 : ahci [ 1.313193] ata1: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36100 irq 19 [ 1.313197] ata2: SATA max UDMA/133 abar m2048@0xf7d36000 port 0xf7d36180 irq 19 [ 1.313198] ata3: DUMMY [ 1.313199] ata4: DUMMY [ 1.313200] ata5: DUMMY [ 1.313201] ata6: DUMMY [ 1.313238] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.313242] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.313259] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.313283] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.317152] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.317164] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d38000 [ 1.328239] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.328265] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.328268] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.328271] usb usb1: Product: EHCI Host Controller [ 1.328274] usb usb1: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 1.328284] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.328358] hub 1-0:1.0: USB hub found [ 1.328362] hub 1-0:1.0: 2 ports detected [ 1.328422] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.328425] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.328431] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.328449] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.332312] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.332326] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d37000 [ 1.344204] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.344225] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.344229] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.344231] usb usb2: Product: EHCI Host Controller [ 1.344234] usb usb2: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd [ 1.344237] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.344319] hub 2-0:1.0: USB hub found [ 1.344321] hub 2-0:1.0: 2 ports detected [ 1.344373] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 [ 1.344378] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 [ 1.344403] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1.344406] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.344412] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.344499] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.344526] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.344528] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.344529] usb usb3: Product: xHCI Host Controller [ 1.344530] usb usb3: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd [ 1.344532] usb usb3: SerialNumber: 0000:00:14.0 [ 1.344584] xHCI xhci_add_endpoint called for root hub [ 1.344586] xHCI xhci_check_bandwidth called for root hub [ 1.344603] hub 3-0:1.0: USB hub found [ 1.344610] hub 3-0:1.0: 4 ports detected [ 1.344657] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.344661] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.344674] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.344676] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.344677] usb usb4: Product: xHCI Host Controller [ 1.344679] usb usb4: Manufacturer: Linux 3.4-9-rtai-686-pae xhci_hcd [ 1.344680] usb usb4: SerialNumber: 0000:00:14.0 [ 1.344726] xHCI xhci_add_endpoint called for root hub [ 1.344727] xHCI xhci_check_bandwidth called for root hub [ 1.344743] hub 4-0:1.0: USB hub found [ 1.344749] hub 4-0:1.0: 4 ports detected [ 1.555724] Refined TSC clocksource calibration: 3192.747 MHz. [ 1.555730] Switching to clocksource tsc [ 1.631548] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.631571] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.631861] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.631864] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.631866] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.631897] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.632003] ata1.00: ATA-10: KINGSTON SA400S37120G, SBFKB1E1, max UDMA/133 [ 1.632005] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.632313] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.632316] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.632318] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.632347] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.632448] ata1.00: configured for UDMA/133 [ 1.637807] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.637811] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.637815] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.638784] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.639525] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.639627] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 SBFK PQ: 0 ANSI: 5 [ 1.641708] ata2.00: ATAPI: TSSTcorp DVD+/-RW SN-208BB, D500, max UDMA/100 [ 1.650600] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.650604] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.650608] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.651577] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.654496] ata2.00: configured for UDMA/100 [ 1.661871] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW SN-208BB D500 PQ: 0 ANSI: 5 [ 1.664529] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.664567] sd 0:0:0:0: [sda] Write Protect is off [ 1.664569] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.664580] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.664842] sda: sda1 sda2 sda3 [ 1.665017] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.665919] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.665944] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.669825] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.669830] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.669924] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.771555] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.771561] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.771695] hub 1-1:1.0: USB hub found [ 1.771798] hub 1-1:1.0: 6 ports detected [ 1.882974] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 2.014998] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.015002] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.015139] hub 2-1:1.0: USB hub found [ 2.015241] hub 2-1:1.0: 8 ports detected [ 2.182290] usb 3-2: new high-speed USB device number 2 using xhci_hcd [ 2.198929] usb 3-2: New USB device found, idVendor=0781, idProduct=5406 [ 2.198933] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.198936] usb 3-2: Product: U3 Cruzer Micro [ 2.198938] usb 3-2: Manufacturer: SanDisk [ 2.198941] usb 3-2: SerialNumber: 1233920A28918992 [ 2.200352] Initializing USB Mass Storage driver... [ 2.200407] scsi6 : usb-storage 3-2:1.0 [ 2.200448] usbcore: registered new interface driver usb-storage [ 2.200450] USB Mass Storage support registered. [ 2.270172] usb 1-1.1: new low-speed USB device number 3 using ehci_hcd [ 2.366074] usb 1-1.1: New USB device found, idVendor=04f2, idProduct=0939 [ 2.366078] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.366081] usb 1-1.1: Product: USB Optical Mouse [ 2.366083] usb 1-1.1: Manufacturer: PixArt [ 2.369293] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input0 [ 2.369342] generic-usb 0003:04F2:0939.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1a.0-1.1/input0 [ 2.369353] usbcore: registered new interface driver usbhid [ 2.369354] usbhid: USB HID core driver [ 2.437790] usb 1-1.2: new low-speed USB device number 4 using ehci_hcd [ 2.535189] usb 1-1.2: New USB device found, idVendor=1a2c, idProduct=2124 [ 2.535192] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.535195] usb 1-1.2: Product: USB Keyboard [ 2.535198] usb 1-1.2: Manufacturer: SEM [ 2.538169] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1 [ 2.538205] generic-usb 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:1a.0-1.2/input0 [ 2.541749] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2 [ 2.541783] generic-usb 0003:1A2C:2124.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:1a.0-1.2/input1 [ 3.196309] scsi 6:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 8.02 PQ: 0 ANSI: 0 CCS [ 3.196644] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.196842] sd 6:0:0:0: [sdb] 7856127 512-byte logical blocks: (4.02 GB/3.74 GiB) [ 3.196986] sd 6:0:0:0: [sdb] Write Protect is off [ 3.196988] sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 08 [ 3.197135] sd 6:0:0:0: [sdb] No Caching mode page present [ 3.197186] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.198032] sd 6:0:0:0: [sdb] No Caching mode page present [ 3.198094] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.200180] sdb: sdb1 sdb2 < sdb5 > [ 3.201055] sd 6:0:0:0: [sdb] No Caching mode page present [ 3.201105] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 3.201156] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 6.793951] PM: Starting manual resume from disk [ 6.793953] PM: Hibernation image partition 8:21 present [ 6.793955] PM: Looking for hibernation image. [ 6.794821] PM: Image not found (code -22) [ 6.794825] PM: Hibernation image not present or could not be loaded. [ 6.805249] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 7.305078] udevd[428]: starting version 175 [ 7.401064] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 7.401070] ACPI: Power Button [PWRB] [ 7.401101] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 7.401104] ACPI: Power Button [PWRF] [ 7.480117] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 7.481393] wmi: Mapper loaded [ 7.522233] udevd[469]: renamed network interface eth0 to eth2 [ 7.538860] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 7.620084] iTCO_vendor_support: vendor-support=0 [ 7.623940] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 7.623994] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 7.624044] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 7.627824] ACPI Warning: 0x0000f040-0x0000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251) [ 7.627830] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.641796] [drm] Initialized drm 1.1.0 20060810 [ 7.685042] i915 0000:00:02.0: setting latency timer to 64 [ 7.698334] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 7.698336] [drm] MTRR allocation failed. Graphics performance may suffer. [ 7.698436] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 7.698437] [drm] Driver supports precise vblank timestamp query. [ 7.698487] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed [ 7.698926] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 7.736200] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 8.001613] fbcon: inteldrmfb (fb0) is primary device [ 8.174160] Console: switching to colour frame buffer device 160x64 [ 8.176392] fb0: inteldrmfb frame buffer device [ 8.176393] drm: registered panic notifier [ 8.176823] acpi device:48: registered as cooling_device0 [ 8.177053] acpi device:49: registered as cooling_device1 [ 8.177279] acpi device:4a: registered as cooling_device2 [ 8.177503] acpi device:4b: registered as cooling_device3 [ 8.177728] acpi device:4c: registered as cooling_device4 [ 8.177951] acpi device:4d: registered as cooling_device5 [ 8.178174] acpi device:4e: registered as cooling_device6 [ 8.178397] acpi device:4f: registered as cooling_device7 [ 8.178452] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 8.178488] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 8.178501] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 8.723445] hda_codec: ALC269VB: SKU not ready 0x411111f0 [ 8.725384] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 8.732485] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 8.732539] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 8.732584] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 8.732625] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 8.732664] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 8.732704] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 9.101492] Adding 211964k swap on /dev/sdb5. Priority:-1 extents:1 across:211964k [ 9.109291] EXT4-fs (sdb1): re-mounted. Opts: (null) [ 9.196663] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 9.211511] loop: module loaded [ 10.175748] RPC: Registered named UNIX socket transport module. [ 10.175751] RPC: Registered udp transport module. [ 10.175752] RPC: Registered tcp transport module. [ 10.175753] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 10.185502] FS-Cache: Loaded [ 10.204718] NFS: Registering the id_resolver key type [ 10.204728] FS-Cache: Netfs 'nfs' registered for caching [ 10.216003] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 12.292089] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14 [ 12.328459] Bluetooth: Core ver 2.16 [ 12.328469] NET: Registered protocol family 31 [ 12.328471] Bluetooth: HCI device and connection manager initialized [ 12.328472] Bluetooth: HCI socket layer initialized [ 12.328473] Bluetooth: L2CAP socket layer initialized [ 12.328476] Bluetooth: SCO socket layer initialized [ 12.343584] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.343586] Bluetooth: BNEP filters: protocol multicast [ 12.375656] Bluetooth: RFCOMM TTY layer initialized [ 12.375659] Bluetooth: RFCOMM socket layer initialized [ 12.375661] Bluetooth: RFCOMM ver 1.11 [ 12.402700] lp: driver loaded but no devices found [ 12.424875] ppdev: user-space parallel port driver [ 12.828466] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 19.058810] e1000e: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx [ 19.058814] e1000e 0000:00:19.0: eth2: 10/100 speed: disabling TSO [ 19.058895] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 409.277518] usb 3-1: new high-speed USB device number 3 using xhci_hcd [ 409.306400] usb 3-1: New USB device found, idVendor=058f, idProduct=6387 [ 409.306405] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 409.306408] usb 3-1: Product: Mass Storage [ 409.306411] usb 3-1: Manufacturer: Generic [ 409.306413] usb 3-1: SerialNumber: 7DDAE0DB [ 409.306692] scsi7 : usb-storage 3-1:1.0 [ 410.305661] scsi 7:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4 [ 410.306025] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 410.306772] sd 7:0:0:0: [sdc] 62545920 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 410.307904] sd 7:0:0:0: [sdc] Write Protect is off [ 410.307907] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 410.308571] sd 7:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 410.312380] sdc: [ 410.314210] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 545.151080] I-pipe: head domain RTAI registered. [ 545.151084] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 545.151128] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 545.151131] SYSINFO: CPUs 4, LINUX APIC IRQ 2312, TIM_FREQ 6235380, CLK_FREQ 3192727000, CPU_FREQ 3192727000 [ 545.151133] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 545.151135] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 6235380, 6235380, 3626750 [ 545.233302] RTAI[malloc]: global heap size = 2097152 bytes, . [ 545.233321] , , kstacks pool size = 524288 bytes. [ 545.233323] RTAI[sched]: hard timer type/freq = APIC/6235380(Hz); default timing: oneshot; linear timed lists. [ 545.233326] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3192727000 hz. [ 545.233327] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns. [ 545.253126] RTAI[math]: loaded. [ 545.386451] config string '0e010 out' [ 545.419999] RTAPI: ERROR: Unexpected realtime delay on task 1 [ 545.420000] This Message will only display once per session. [ 545.420001] Run the Latency Test and resolve before continuing. [ 586.130669] RTAI[math]: unloaded. [ 586.131585] SCHED releases registered named ALIEN PEDV$D [ 586.133658] RTAI[malloc]: unloaded. [ 586.231531] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 586.232504] I-pipe: head domain RTAI unregistered. [ 586.232554] RTAI[hal]: unmounted. [ 660.015988] I-pipe: head domain RTAI registered. [ 660.015992] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 660.016038] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 660.016040] SYSINFO: CPUs 4, LINUX APIC IRQ 2312, TIM_FREQ 6235380, CLK_FREQ 3192727000, CPU_FREQ 3192727000 [ 660.016042] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 660.016044] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 6235380, 6235380, 6230750 [ 660.019382] RTAI[malloc]: global heap size = 2097152 bytes, . [ 660.019398] , , kstacks pool size = 524288 bytes. [ 660.019401] RTAI[sched]: hard timer type/freq = APIC/6235380(Hz); default timing: oneshot; linear timed lists. [ 660.019403] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3192727000 hz. [ 660.019405] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns. [ 660.023915] RTAI[math]: loaded. [ 660.050502] config string '0e010 out' [ 660.083563] RTAPI: ERROR: Unexpected realtime delay on task 1 [ 660.083564] This Message will only display once per session. [ 660.083605] Run the Latency Test and resolve before continuing. [ 696.567560] RTAI[math]: unloaded. [ 696.568466] SCHED releases registered named ALIEN PEDV$D [ 696.571848] RTAI[malloc]: unloaded. [ 696.668657] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 696.669637] I-pipe: head domain RTAI unregistered. [ 696.669687] RTAI[hal]: unmounted. [ 885.581588] FAT-fs (sdc): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 3238.022094] I-pipe: head domain RTAI registered. [ 3238.022098] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) . [ 3238.022142] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 3238.022144] SYSINFO: CPUs 4, LINUX APIC IRQ 2312, TIM_FREQ 6235380, CLK_FREQ 3192727000, CPU_FREQ 3192727000 [ 3238.022146] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312 [ 3238.022148] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 6235380, 6235380, 5428000 [ 3238.025602] RTAI[malloc]: global heap size = 2097152 bytes, . [ 3238.025620] , , kstacks pool size = 524288 bytes. [ 3238.025623] RTAI[sched]: hard timer type/freq = APIC/6235380(Hz); default timing: oneshot; linear timed lists. [ 3238.025625] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 3192727000 hz. [ 3238.025626] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns. [ 3238.030857] RTAI[math]: loaded. [ 3238.057375] config string '0e010 out' [ 3238.086917] RTAPI: ERROR: Unexpected realtime delay on task 1 [ 3238.086919] This Message will only display once per session. [ 3238.086919] Run the Latency Test and resolve before continuing. [ 3257.768029] RTAI[math]: unloaded. [ 3257.768938] SCHED releases registered named ALIEN PEDV$D [ 3257.771437] RTAI[malloc]: unloaded. [ 3257.870499] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 3257.871472] I-pipe: head domain RTAI unregistered. [ 3257.871521] RTAI[hal]: unmounted. stefano@stefano:~$