[ 0.000000] Linux version 6.1.0-17-rt-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_RT Debian 6.1.69-1 (2023-12-30) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-17-rt-amd64 root=UUID=e1af2c1d-085f-40b9-a308-9cefa7d64d96 ro quiet splash isolcpus=4,5,6,7 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000000a20b000-0x00000000ca0c5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ca0c6000-0x00000000cb5a4fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cb5a5000-0x00000000cb621fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cb622000-0x00000000cbaf7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cbaf8000-0x00000000cc356fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cc357000-0x00000000cc3f1fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000cc3f2000-0x00000000ceffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f33ffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: TPMFinalLog=0xcbaa9000 ACPI 2.0=0xcb5be000 ACPI=0xcb5be000 SMBIOS=0xcc20c000 SMBIOS 3.0=0xcc20b000 MEMATTR=0xc58ca018 ESRT=0xc7219f18 MOKvar=0xcc239000 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.2.0 present. [ 0.000000] DMI: LENOVO 11A4000HGE/3151, BIOS M2FKT27A 12/01/2020 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3294.045 MHz processor [ 0.000505] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000507] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000513] last_pfn = 0x21f340 max_arch_pfn = 0x400000000 [ 0.000882] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001012] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.001019] last_pfn = 0xcf000 max_arch_pfn = 0x400000000 [ 0.005119] Using GB pages for direct mapping [ 0.005750] RAMDISK: [mem 0x2e17b000-0x330b4fff] [ 0.005756] ACPI: Early table checksum verification disabled [ 0.005759] ACPI: RSDP 0x00000000CB5BE000 000024 (v02 LENOVO) [ 0.005763] ACPI: XSDT 0x00000000CB5BE0B0 0000DC (v01 LENOVO TC-M2F 000011B0 AMI 00010013) [ 0.005767] ACPI: FACP 0x00000000CB5CADA0 000114 (v06 LENOVO TC-M2F 000011B0 AMI 00010013) [ 0.005771] ACPI: DSDT 0x00000000CB5BE218 00CB81 (v02 LENOVO TC-M2F 000011B0 INTL 20120913) [ 0.005774] ACPI: FACS 0x00000000CBADEE00 000040 [ 0.005776] ACPI: APIC 0x00000000CB5CAEB8 00015E (v03 LENOVO TC-M2F 000011B0 AMI 00010013) [ 0.005778] ACPI: FPDT 0x00000000CB5CB018 000044 (v01 LENOVO TC-M2F 000011B0 AMI 00010013) [ 0.005780] ACPI: FIDT 0x00000000CB5CB060 00009C (v01 LENOVO TC-M2F 000011B0 AMI 00010013) [ 0.005782] ACPI: SSDT 0x00000000CB5CB100 000094 (v02 LENOVO TC-M2F 000011B0 AMI 01072009) [ 0.005784] ACPI: SSDT 0x00000000CB5CB198 005419 (v02 LENOVO TC-M2F 000011B0 MSFT 02000002) [ 0.005786] ACPI: SSDT 0x00000000CB5D05B8 00378A (v01 LENOVO TC-M2F 000011B0 INTL 20120913) [ 0.005788] ACPI: MCFG 0x00000000CB5D3D48 00003C (v01 LENOVO TC-M2F 000011B0 MSFT 00010013) [ 0.005790] ACPI: SLIC 0x00000000CB5D3D88 000176 (v01 LENOVO TC-M2F 000011B0 AMI 00010013) [ 0.005792] ACPI: MSDM 0x00000000CB5D3F00 000055 (v03 LENOVO TC-M2F 000011B0 AMI 00010013) [ 0.005794] ACPI: HPET 0x00000000CB5D3F58 000038 (v01 LENOVO TC-M2F 000011B0 AMI 00000005) [ 0.005796] ACPI: UEFI 0x00000000CB5D3F90 000042 (v01 LENOVO TC-M2F 000011B0 01000013) [ 0.005798] ACPI: BGRT 0x00000000CB5D3FD8 000038 (v01 LENOVO TC-M2F 000011B0 AMI 00010013) [ 0.005800] ACPI: TPM2 0x00000000CB5D4010 000034 (v04 LENOVO TC-M2F 000011B0 AMI 00000000) [ 0.005802] ACPI: IVRS 0x00000000CB5D4048 0000D0 (v02 LENOVO TC-M2F 000011B0 AMD 00000000) [ 0.005804] ACPI: SSDT 0x00000000CB5D4118 000E0C (v01 LENOVO TC-M2F 000011B0 AMD 00000001) [ 0.005806] ACPI: CRAT 0x00000000CB5D4F28 000810 (v01 LENOVO TC-M2F 000011B0 AMD 00000001) [ 0.005808] ACPI: CDIT 0x00000000CB5D5738 000029 (v01 LENOVO TC-M2F 000011B0 AMD 00000001) [ 0.005810] ACPI: LUFT 0x00000000CB5D5768 034CC2 (v01 LENOVO TC-M2F 000011B0 AMI 00010013) [ 0.005812] ACPI: SSDT 0x00000000CB60A430 000C34 (v01 LENOVO TC-M2F 000011B0 INTL 20120913) [ 0.005814] ACPI: SSDT 0x00000000CB60B068 0010AC (v01 LENOVO TC-M2F 000011B0 INTL 20120913) [ 0.005816] ACPI: SSDT 0x00000000CB60C118 001D4A (v01 LENOVO TC-M2F 000011B0 INTL 20120913) [ 0.005818] ACPI: WSMT 0x00000000CB60DE68 000028 (v01 LENOVO TC-M2F 000011B0 AMI 00010013) [ 0.005820] ACPI: Reserving FACP table memory at [mem 0xcb5cada0-0xcb5caeb3] [ 0.005821] ACPI: Reserving DSDT table memory at [mem 0xcb5be218-0xcb5cad98] [ 0.005822] ACPI: Reserving FACS table memory at [mem 0xcbadee00-0xcbadee3f] [ 0.005823] ACPI: Reserving APIC table memory at [mem 0xcb5caeb8-0xcb5cb015] [ 0.005823] ACPI: Reserving FPDT table memory at [mem 0xcb5cb018-0xcb5cb05b] [ 0.005824] ACPI: Reserving FIDT table memory at [mem 0xcb5cb060-0xcb5cb0fb] [ 0.005825] ACPI: Reserving SSDT table memory at [mem 0xcb5cb100-0xcb5cb193] [ 0.005825] ACPI: Reserving SSDT table memory at [mem 0xcb5cb198-0xcb5d05b0] [ 0.005826] ACPI: Reserving SSDT table memory at [mem 0xcb5d05b8-0xcb5d3d41] [ 0.005826] ACPI: Reserving MCFG table memory at [mem 0xcb5d3d48-0xcb5d3d83] [ 0.005827] ACPI: Reserving SLIC table memory at [mem 0xcb5d3d88-0xcb5d3efd] [ 0.005828] ACPI: Reserving MSDM table memory at [mem 0xcb5d3f00-0xcb5d3f54] [ 0.005828] ACPI: Reserving HPET table memory at [mem 0xcb5d3f58-0xcb5d3f8f] [ 0.005829] ACPI: Reserving UEFI table memory at [mem 0xcb5d3f90-0xcb5d3fd1] [ 0.005829] ACPI: Reserving BGRT table memory at [mem 0xcb5d3fd8-0xcb5d400f] [ 0.005830] ACPI: Reserving TPM2 table memory at [mem 0xcb5d4010-0xcb5d4043] [ 0.005831] ACPI: Reserving IVRS table memory at [mem 0xcb5d4048-0xcb5d4117] [ 0.005831] ACPI: Reserving SSDT table memory at [mem 0xcb5d4118-0xcb5d4f23] [ 0.005832] ACPI: Reserving CRAT table memory at [mem 0xcb5d4f28-0xcb5d5737] [ 0.005833] ACPI: Reserving CDIT table memory at [mem 0xcb5d5738-0xcb5d5760] [ 0.005833] ACPI: Reserving LUFT table memory at [mem 0xcb5d5768-0xcb60a429] [ 0.005834] ACPI: Reserving SSDT table memory at [mem 0xcb60a430-0xcb60b063] [ 0.005835] ACPI: Reserving SSDT table memory at [mem 0xcb60b068-0xcb60c113] [ 0.005835] ACPI: Reserving SSDT table memory at [mem 0xcb60c118-0xcb60de61] [ 0.005836] ACPI: Reserving WSMT table memory at [mem 0xcb60de68-0xcb60de8f] [ 0.005904] No NUMA configuration found [ 0.005904] Faking a node at [mem 0x0000000000000000-0x000000021f33ffff] [ 0.005911] NODE_DATA(0) allocated [mem 0x21f315000-0x21f33ffff] [ 0.006119] Zone ranges: [ 0.006119] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.006121] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.006122] Normal [mem 0x0000000100000000-0x000000021f33ffff] [ 0.006123] Device empty [ 0.006123] Movable zone start for each node [ 0.006126] Early memory node ranges [ 0.006126] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.006127] node 0: [mem 0x0000000000100000-0x0000000009cfffff] [ 0.006128] node 0: [mem 0x000000000a000000-0x000000000a1fffff] [ 0.006128] node 0: [mem 0x000000000a20b000-0x00000000ca0c5fff] [ 0.006129] node 0: [mem 0x00000000cc3f2000-0x00000000ceffffff] [ 0.006130] node 0: [mem 0x0000000100000000-0x000000021f33ffff] [ 0.006131] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f33ffff] [ 0.006136] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.006158] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.006364] On node 0, zone DMA32: 768 pages in unavailable ranges [ 0.014111] On node 0, zone DMA32: 11 pages in unavailable ranges [ 0.014309] On node 0, zone DMA32: 9004 pages in unavailable ranges [ 0.014639] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.014673] On node 0, zone Normal: 3264 pages in unavailable ranges [ 0.014846] ACPI: PM-Timer IO Port: 0x808 [ 0.014855] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.014871] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.014878] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55 [ 0.014880] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.014881] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.014885] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.014885] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.014891] smpboot: Allowing 32 CPUs, 24 hotplug CPUs [ 0.014910] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.014912] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.014913] PM: hibernation: Registered nosave memory: [mem 0x09d00000-0x09ffffff] [ 0.014914] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20afff] [ 0.014915] PM: hibernation: Registered nosave memory: [mem 0xca0c6000-0xcb5a4fff] [ 0.014916] PM: hibernation: Registered nosave memory: [mem 0xcb5a5000-0xcb621fff] [ 0.014916] PM: hibernation: Registered nosave memory: [mem 0xcb622000-0xcbaf7fff] [ 0.014917] PM: hibernation: Registered nosave memory: [mem 0xcbaf8000-0xcc356fff] [ 0.014917] PM: hibernation: Registered nosave memory: [mem 0xcc357000-0xcc3f1fff] [ 0.014919] PM: hibernation: Registered nosave memory: [mem 0xcf000000-0xdfffffff] [ 0.014919] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] [ 0.014920] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.014920] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfcffffff] [ 0.014921] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xffffffff] [ 0.014923] [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.014924] Booting paravirtualized kernel on bare hardware [ 0.014927] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.018481] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1 [ 0.020391] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u262144 [ 0.020401] pcpu-alloc: s217088 r8192 d28672 u262144 alloc=1*2097152 [ 0.020404] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 [ 0.020410] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 [ 0.020445] Fallback order for Node 0: 0 [ 0.020453] Built 1 zonelists, mobility grouping on. Total pages: 1982740 [ 0.020455] Policy zone: Normal [ 0.020456] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-17-rt-amd64 root=UUID=e1af2c1d-085f-40b9-a308-9cefa7d64d96 ro quiet splash isolcpus=4,5,6,7 [ 0.020518] Unknown kernel command line parameters "splash BOOT_IMAGE=/boot/vmlinuz-6.1.0-17-rt-amd64", will be passed to user space. [ 0.020551] random: crng init done [ 0.020552] printk: log_buf_len individual max cpu contribution: 4096 bytes [ 0.020552] printk: log_buf_len total cpu_extra contributions: 126976 bytes [ 0.020553] printk: log_buf_len min size: 131072 bytes [ 0.020746] printk: log_buf_len: 262144 bytes [ 0.020747] printk: early log buf free: 119760(91%) [ 0.021767] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.022274] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.022377] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.022425] software IO TLB: area num 32. [ 0.050927] Memory: 3282160K/8057504K available (14342K kernel code, 2381K rwdata, 9000K rodata, 2784K init, 17396K bss, 350008K reserved, 0K cma-reserved) [ 0.051134] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1 [ 0.051171] ftrace: allocating 39977 entries in 157 pages [ 0.056640] ftrace: allocated 157 pages with 5 groups [ 0.056872] rcu: Preemptible hierarchical RCU implementation. [ 0.056873] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32. [ 0.056873] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.056874] rcu: RCU_SOFTIRQ processing moved to rcuc kthreads. [ 0.056875] No expedited grace period (rcu_normal_after_boot). [ 0.056875] Trampoline variant of Tasks RCU enabled. [ 0.056875] Rude variant of Tasks RCU enabled. [ 0.056876] Tracing variant of Tasks RCU enabled. [ 0.056876] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.056877] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32 [ 0.060282] NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16 [ 0.060507] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.060610] Console: colour dummy device 80x25 [ 0.060623] printk: console [tty0] enabled [ 0.060673] ACPI: Core revision 20220331 [ 0.060860] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.060886] APIC: Switch to symmetric I/O mode setup [ 0.062016] AMD-Vi: Using global IVHD EFR:0x4f77ef22294ada, EFR2:0x0 [ 0.062400] Switched APIC routing to physical flat. [ 0.063341] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.080892] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2f7b52cbce4, max_idle_ns: 440795300244 ns [ 0.080902] Calibrating delay loop (skipped), value calculated using timer frequency.. 6588.09 BogoMIPS (lpj=13176180) [ 0.080920] AMD Zen1 DIV0 bug detected. Disable SMT for full protection. [ 0.080965] LVT offset 1 assigned for vector 0xf9 [ 0.081046] LVT offset 2 assigned for vector 0xf4 [ 0.081067] process: using mwait in idle threads [ 0.081068] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512 [ 0.081069] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0 [ 0.081073] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.081075] Spectre V2 : Mitigation: Retpolines [ 0.081075] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.081076] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.081076] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.081076] RETBleed: Mitigation: untrained return thunk [ 0.081078] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.081079] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.081081] Speculative Return Stack Overflow: Mitigation: safe RET [ 0.081086] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.081087] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.081088] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.081089] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.081090] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format. [ 0.087501] Freeing SMP alternatives memory: 32K [ 0.087503] pid_max: default: 32768 minimum: 301 [ 0.087560] LSM: Security Framework initializing [ 0.087567] landlock: Up and running. [ 0.087568] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.087591] AppArmor: AppArmor initialized [ 0.087593] TOMOYO Linux initialized [ 0.087596] LSM support for eBPF active [ 0.087633] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.087645] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.198149] smpboot: CPU0: AMD Ryzen 5 PRO 3400GE w/ Radeon Vega Graphics (family: 0x17, model: 0x18, stepping: 0x1) [ 0.198293] cblist_init_generic: Setting adjustable number of callback queues. [ 0.198295] cblist_init_generic: Setting shift to 5 and lim to 1. [ 0.198318] cblist_init_generic: Setting adjustable number of callback queues. [ 0.198319] cblist_init_generic: Setting shift to 5 and lim to 1. [ 0.198337] cblist_init_generic: Setting adjustable number of callback queues. [ 0.198337] cblist_init_generic: Setting shift to 5 and lim to 1. [ 0.198350] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 0.198371] ... version: 0 [ 0.198372] ... bit width: 48 [ 0.198373] ... generic registers: 6 [ 0.198373] ... value mask: 0000ffffffffffff [ 0.198374] ... max period: 00007fffffffffff [ 0.198375] ... fixed-purpose events: 0 [ 0.198375] ... event mask: 000000000000003f [ 0.198470] signal: max sigframe size: 1776 [ 0.198535] rcu: Hierarchical SRCU implementation. [ 0.198536] rcu: Max phase no-delay instances is 1000. [ 0.198548] printk: console [tty0] printing thread started [ 0.198887] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.199183] smp: Bringing up secondary CPUs ... [ 0.199334] x86: Booting SMP configuration: [ 0.199334] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.212939] smp: Brought up 1 node, 8 CPUs [ 0.212939] smpboot: Max logical packages: 4 [ 0.212939] smpboot: Total of 8 processors activated (52704.72 BogoMIPS) [ 0.229243] node 0 deferred pages initialised in 16ms [ 0.229262] devtmpfs: initialized [ 0.229262] x86/mm: Memory block size: 128MB [ 0.229791] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes) [ 0.229791] ACPI: PM: Registering ACPI NVS region [mem 0xcb622000-0xcbaf7fff] (5070848 bytes) [ 0.229791] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.229791] futex hash table entries: 8192 (order: 7, 524288 bytes, linear) [ 0.229791] pinctrl core: initialized pinctrl subsystem [ 0.230024] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.230243] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.230383] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.230539] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.230579] audit: initializing netlink subsys (disabled) [ 0.230597] audit: type=2000 audit(1707889181.168:1): state=initialized audit_enabled=0 res=1 [ 0.232998] thermal_sys: Registered thermal governor 'fair_share' [ 0.233000] thermal_sys: Registered thermal governor 'bang_bang' [ 0.233000] thermal_sys: Registered thermal governor 'step_wise' [ 0.233001] thermal_sys: Registered thermal governor 'user_space' [ 0.233001] thermal_sys: Registered thermal governor 'power_allocator' [ 0.233021] cpuidle: using governor ladder [ 0.233021] cpuidle: using governor menu [ 0.233021] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.233034] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.233038] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.233050] PCI: Using configuration type 1 for base access [ 0.234311] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.234316] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.234316] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.234316] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.234316] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.234316] ACPI: Added _OSI(Module Device) [ 0.234316] ACPI: Added _OSI(Processor Device) [ 0.234316] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.234316] ACPI: Added _OSI(Processor Aggregator Device) [ 0.245178] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.245863] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.246686] ACPI: Interpreter enabled [ 0.246701] ACPI: PM: (supports S0 S3 S4 S5) [ 0.246702] ACPI: Using IOAPIC for interrupt routing [ 0.246981] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.246982] PCI: Using E820 reservations for host bridge windows [ 0.247179] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.254814] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.254820] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.254893] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR] [ 0.255027] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.255037] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.255364] PCI host bridge to bus 0000:00 [ 0.255366] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.255368] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.255369] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.255370] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.255371] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 0.255373] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec02fff window] [ 0.255374] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window] [ 0.255375] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.255391] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000 [ 0.255506] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600 [ 0.255623] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000 [ 0.255700] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400 [ 0.255779] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.255973] pci 0000:00:01.5: [1022:15d3] type 01 class 0x060400 [ 0.256005] pci 0000:00:01.5: enabling Extended Tags [ 0.256054] pci 0000:00:01.5: PME# supported from D0 D3hot D3cold [ 0.256234] pci 0000:00:01.6: [1022:15d3] type 01 class 0x060400 [ 0.256266] pci 0000:00:01.6: enabling Extended Tags [ 0.256314] pci 0000:00:01.6: PME# supported from D0 D3hot D3cold [ 0.256504] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000 [ 0.256582] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400 [ 0.256614] pci 0000:00:08.1: enabling Extended Tags [ 0.256656] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.256838] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400 [ 0.256871] pci 0000:00:08.2: enabling Extended Tags [ 0.256923] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 0.257129] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.257275] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.257432] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000 [ 0.257468] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000 [ 0.257505] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000 [ 0.257541] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000 [ 0.257577] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000 [ 0.257617] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000 [ 0.257653] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000 [ 0.257688] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000 [ 0.257868] pci 0000:01:00.0: [c0a9:540a] type 00 class 0x010802 [ 0.257922] pci 0000:01:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit] [ 0.258754] pci 0000:00:01.2: PCI bridge to [bus 01] [ 0.258759] pci 0000:00:01.2: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.258828] pci 0000:02:00.0: [10ec:c822] type 00 class 0x028000 [ 0.258848] pci 0000:02:00.0: reg 0x10: [io 0xf000-0xf0ff] [ 0.258873] pci 0000:02:00.0: reg 0x18: [mem 0xfce00000-0xfce0ffff 64bit] [ 0.258997] pci 0000:02:00.0: supports D1 D2 [ 0.258997] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.259201] pci 0000:00:01.5: PCI bridge to [bus 02] [ 0.259204] pci 0000:00:01.5: bridge window [io 0xf000-0xffff] [ 0.259207] pci 0000:00:01.5: bridge window [mem 0xfce00000-0xfcefffff] [ 0.259267] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.259286] pci 0000:03:00.0: reg 0x10: [io 0xec00-0xecff] [ 0.259311] pci 0000:03:00.0: reg 0x18: [mem 0xfcd18000-0xfcd18fff 64bit] [ 0.259326] pci 0000:03:00.0: reg 0x20: [mem 0xfcd10000-0xfcd13fff 64bit] [ 0.259427] pci 0000:03:00.0: supports D1 D2 [ 0.259428] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.259600] pci 0000:03:00.1: [10ec:816a] type 00 class 0x070002 [ 0.259618] pci 0000:03:00.1: reg 0x10: [io 0xe800-0xe8ff] [ 0.259643] pci 0000:03:00.1: reg 0x18: [mem 0xfcd17000-0xfcd17fff 64bit] [ 0.259658] pci 0000:03:00.1: reg 0x20: [mem 0xfcd0c000-0xfcd0ffff 64bit] [ 0.259751] pci 0000:03:00.1: supports D1 D2 [ 0.259752] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.259892] pci 0000:03:00.2: [10ec:816b] type 00 class 0x070002 [ 0.259911] pci 0000:03:00.2: reg 0x10: [io 0xe400-0xe4ff] [ 0.259935] pci 0000:03:00.2: reg 0x18: [mem 0xfcd16000-0xfcd16fff 64bit] [ 0.259951] pci 0000:03:00.2: reg 0x20: [mem 0xfcd08000-0xfcd0bfff 64bit] [ 0.260044] pci 0000:03:00.2: supports D1 D2 [ 0.260045] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.260189] pci 0000:03:00.3: [10ec:816c] type 00 class 0x0c0701 [ 0.260207] pci 0000:03:00.3: reg 0x10: [io 0xe000-0xe0ff] [ 0.260232] pci 0000:03:00.3: reg 0x18: [mem 0xfcd15000-0xfcd15fff 64bit] [ 0.260247] pci 0000:03:00.3: reg 0x20: [mem 0xfcd04000-0xfcd07fff 64bit] [ 0.260341] pci 0000:03:00.3: supports D1 D2 [ 0.260341] pci 0000:03:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.260482] pci 0000:03:00.4: [10ec:816d] type 00 class 0x0c0320 [ 0.260501] pci 0000:03:00.4: reg 0x10: [mem 0xfcd14000-0xfcd14fff] [ 0.260525] pci 0000:03:00.4: reg 0x18: [mem 0xfcd00000-0xfcd03fff 64bit] [ 0.260637] pci 0000:03:00.4: PME# supported from D0 D3cold [ 0.260834] pci 0000:00:01.6: PCI bridge to [bus 03] [ 0.260838] pci 0000:00:01.6: bridge window [io 0xe000-0xefff] [ 0.260841] pci 0000:00:01.6: bridge window [mem 0xfcd00000-0xfcdfffff] [ 0.260939] pci 0000:04:00.0: [1002:15d8] type 00 class 0x030000 [ 0.260956] pci 0000:04:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.260967] pci 0000:04:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.260974] pci 0000:04:00.0: reg 0x20: [io 0xd000-0xd0ff] [ 0.260982] pci 0000:04:00.0: reg 0x24: [mem 0xfcb00000-0xfcb7ffff] [ 0.260994] pci 0000:04:00.0: enabling Extended Tags [ 0.261012] pci 0000:04:00.0: BAR 0: assigned to efifb [ 0.261017] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.261076] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.261232] pci 0000:04:00.1: [1002:15de] type 00 class 0x040300 [ 0.261245] pci 0000:04:00.1: reg 0x10: [mem 0xfcbc8000-0xfcbcbfff] [ 0.261287] pci 0000:04:00.1: enabling Extended Tags [ 0.261330] pci 0000:04:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.261420] pci 0000:04:00.2: [1022:15df] type 00 class 0x108000 [ 0.261445] pci 0000:04:00.2: reg 0x18: [mem 0xfca00000-0xfcafffff] [ 0.261465] pci 0000:04:00.2: reg 0x24: [mem 0xfcbcc000-0xfcbcdfff] [ 0.261477] pci 0000:04:00.2: enabling Extended Tags [ 0.261607] pci 0000:04:00.3: [1022:15e0] type 00 class 0x0c0330 [ 0.261623] pci 0000:04:00.3: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit] [ 0.261659] pci 0000:04:00.3: enabling Extended Tags [ 0.261705] pci 0000:04:00.3: PME# supported from D0 D3hot D3cold [ 0.261811] pci 0000:04:00.4: [1022:15e1] type 00 class 0x0c0330 [ 0.261827] pci 0000:04:00.4: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit] [ 0.261863] pci 0000:04:00.4: enabling Extended Tags [ 0.261909] pci 0000:04:00.4: PME# supported from D0 D3hot D3cold [ 0.261998] pci 0000:04:00.5: [1022:15e2] type 00 class 0x048000 [ 0.262011] pci 0000:04:00.5: reg 0x10: [mem 0xfcb80000-0xfcbbffff] [ 0.262053] pci 0000:04:00.5: enabling Extended Tags [ 0.262095] pci 0000:04:00.5: PME# supported from D0 D3hot D3cold [ 0.262211] pci 0000:00:08.1: PCI bridge to [bus 04] [ 0.262215] pci 0000:00:08.1: bridge window [io 0xd000-0xdfff] [ 0.262217] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcbfffff] [ 0.262221] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.262289] pci 0000:05:00.0: [1022:7901] type 00 class 0x010601 [ 0.262332] pci 0000:05:00.0: reg 0x24: [mem 0xfcc00000-0xfcc007ff] [ 0.262344] pci 0000:05:00.0: enabling Extended Tags [ 0.262400] pci 0000:05:00.0: PME# supported from D3hot D3cold [ 0.262533] pci 0000:00:08.2: PCI bridge to [bus 05] [ 0.262538] pci 0000:00:08.2: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.263156] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.263201] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 0.263239] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.263289] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.263333] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.263367] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.263402] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.263436] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.264834] iommu: Default domain type: Translated [ 0.264834] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.264941] pps_core: LinuxPPS API ver. 1 registered [ 0.264942] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.264945] PTP clock support registered [ 0.264952] EDAC MC: Ver: 3.0.0 [ 0.265101] NetLabel: Initializing [ 0.265101] NetLabel: domain hash size = 128 [ 0.265101] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.265101] NetLabel: unlabeled traffic allowed by default [ 0.265101] PCI: Using ACPI for IRQ routing [ 0.267420] PCI: pci_cache_line_size set to 64 bytes [ 0.267614] Expanded resource Reserved due to conflict with PCI Bus 0000:00 [ 0.267615] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff] [ 0.267616] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.267617] e820: reserve RAM buffer [mem 0xca0c6000-0xcbffffff] [ 0.267618] e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff] [ 0.267619] e820: reserve RAM buffer [mem 0x21f340000-0x21fffffff] [ 0.267633] pci 0000:04:00.0: vgaarb: setting as boot VGA device [ 0.267633] pci 0000:04:00.0: vgaarb: bridge control possible [ 0.267633] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.267633] vgaarb: loaded [ 0.267633] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.267633] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.269949] clocksource: Switched to clocksource tsc-early [ 0.270135] VFS: Disk quotas dquot_6.6.0 [ 0.270156] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.270322] AppArmor: AppArmor Filesystem Enabled [ 0.270336] pnp: PnP ACPI init [ 0.270416] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.270473] system 00:01: [mem 0xd0000000-0xdfffffff window] has been reserved [ 0.271091] system 00:03: [io 0x0a00-0x0a0f] has been reserved [ 0.271093] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.271094] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 0.271095] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.271097] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.271098] system 00:03: [io 0x0a50-0x0a5f] has been reserved [ 0.271099] system 00:03: [io 0x0a60-0x0a6f] has been reserved [ 0.271100] system 00:03: [io 0x0a70-0x0a7f] has been reserved [ 0.271101] system 00:03: [io 0x0a88-0x0a97] has been reserved [ 0.271103] system 00:03: [io 0x0a98-0x0aa7] has been reserved [ 0.271539] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.271541] system 00:04: [io 0x040b] has been reserved [ 0.271542] system 00:04: [io 0x04d6] has been reserved [ 0.271543] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.271544] system 00:04: [io 0x0c14] has been reserved [ 0.271546] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 0.271547] system 00:04: [io 0x0c52] has been reserved [ 0.271548] system 00:04: [io 0x0c6c] has been reserved [ 0.271549] system 00:04: [io 0x0c6f] has been reserved [ 0.271550] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.271551] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.271552] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.271553] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.271554] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 0.271555] system 00:04: [io 0x0800-0x089f] has been reserved [ 0.271556] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 0.271558] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.271559] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.271560] system 00:04: [io 0x0910-0x091f] has been reserved [ 0.271561] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.271563] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.271564] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.271567] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.271569] system 00:04: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.271570] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.271572] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.271933] pnp: PnP ACPI: found 5 devices [ 0.276606] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.276692] NET: Registered PF_INET protocol family [ 0.276895] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.278525] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear) [ 0.278577] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.278667] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.279916] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes, vmalloc hugepage) [ 0.280842] TCP: Hash tables configured (established 65536 bind 65536) [ 0.281123] MPTCP token hash table entries: 8192 (order: 6, 458752 bytes, linear) [ 0.281251] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear) [ 0.281365] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear) [ 0.281486] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.281499] NET: Registered PF_XDP protocol family [ 0.281526] pci 0000:00:01.2: PCI bridge to [bus 01] [ 0.281533] pci 0000:00:01.2: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.281539] pci 0000:00:01.5: PCI bridge to [bus 02] [ 0.281541] pci 0000:00:01.5: bridge window [io 0xf000-0xffff] [ 0.281544] pci 0000:00:01.5: bridge window [mem 0xfce00000-0xfcefffff] [ 0.281551] pci 0000:00:01.6: PCI bridge to [bus 03] [ 0.281553] pci 0000:00:01.6: bridge window [io 0xe000-0xefff] [ 0.281556] pci 0000:00:01.6: bridge window [mem 0xfcd00000-0xfcdfffff] [ 0.281565] pci 0000:00:08.1: PCI bridge to [bus 04] [ 0.281571] pci 0000:00:08.1: bridge window [io 0xd000-0xdfff] [ 0.281575] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcbfffff] [ 0.281577] pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.281581] pci 0000:00:08.2: PCI bridge to [bus 05] [ 0.281585] pci 0000:00:08.2: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.281592] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.281594] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.281595] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.281596] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.281597] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 0.281598] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfec02fff window] [ 0.281599] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window] [ 0.281601] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff] [ 0.281602] pci_bus 0000:02: resource 0 [io 0xf000-0xffff] [ 0.281603] pci_bus 0000:02: resource 1 [mem 0xfce00000-0xfcefffff] [ 0.281604] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.281605] pci_bus 0000:03: resource 1 [mem 0xfcd00000-0xfcdfffff] [ 0.281606] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.281607] pci_bus 0000:04: resource 1 [mem 0xfc800000-0xfcbfffff] [ 0.281608] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.281609] pci_bus 0000:05: resource 1 [mem 0xfcc00000-0xfccfffff] [ 0.281977] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0 [ 0.282035] pci 0000:04:00.3: extending delay after power-on from D3hot to 20 msec [ 0.282180] pci 0000:04:00.4: extending delay after power-on from D3hot to 20 msec [ 0.282278] PCI: CLS 64 bytes, default 64 [ 0.282292] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 0.282349] pci 0000:00:01.0: Adding to iommu group 0 [ 0.282362] pci 0000:00:01.2: Adding to iommu group 1 [ 0.282374] pci 0000:00:01.5: Adding to iommu group 2 [ 0.282384] Trying to unpack rootfs image as initramfs... [ 0.282388] pci 0000:00:01.6: Adding to iommu group 3 [ 0.282406] pci 0000:00:08.0: Adding to iommu group 4 [ 0.282417] pci 0000:00:08.1: Adding to iommu group 5 [ 0.282428] pci 0000:00:08.2: Adding to iommu group 6 [ 0.282449] pci 0000:00:14.0: Adding to iommu group 7 [ 0.282459] pci 0000:00:14.3: Adding to iommu group 7 [ 0.282499] pci 0000:00:18.0: Adding to iommu group 8 [ 0.282508] pci 0000:00:18.1: Adding to iommu group 8 [ 0.282518] pci 0000:00:18.2: Adding to iommu group 8 [ 0.282527] pci 0000:00:18.3: Adding to iommu group 8 [ 0.282536] pci 0000:00:18.4: Adding to iommu group 8 [ 0.282547] pci 0000:00:18.5: Adding to iommu group 8 [ 0.282556] pci 0000:00:18.6: Adding to iommu group 8 [ 0.282566] pci 0000:00:18.7: Adding to iommu group 8 [ 0.282578] pci 0000:01:00.0: Adding to iommu group 9 [ 0.282597] pci 0000:02:00.0: Adding to iommu group 10 [ 0.282631] pci 0000:03:00.0: Adding to iommu group 11 [ 0.282644] pci 0000:03:00.1: Adding to iommu group 11 [ 0.282657] pci 0000:03:00.2: Adding to iommu group 11 [ 0.282669] pci 0000:03:00.3: Adding to iommu group 11 [ 0.282681] pci 0000:03:00.4: Adding to iommu group 11 [ 0.282709] pci 0000:04:00.0: Adding to iommu group 12 [ 0.282742] pci 0000:04:00.1: Adding to iommu group 13 [ 0.282761] pci 0000:04:00.2: Adding to iommu group 13 [ 0.282775] pci 0000:04:00.3: Adding to iommu group 13 [ 0.282789] pci 0000:04:00.4: Adding to iommu group 13 [ 0.282805] pci 0000:04:00.5: Adding to iommu group 13 [ 0.282816] pci 0000:05:00.0: Adding to iommu group 14 [ 0.287311] pci 0000:00:00.2: can't derive routing for PCI INT A [ 0.287315] pci 0000:00:00.2: PCI INT A: not connected [ 0.287660] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 0.287661] AMD-Vi: Extended features (0x4f77ef22294ada, 0x0): PPR NX GT IA GA PC GA_vAPIC [ 0.287666] AMD-Vi: Interrupt remapping enabled [ 0.287704] AMD-Vi: Virtual APIC enabled [ 0.287900] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.287901] software IO TLB: mapped [mem 0x00000000c60c6000-0x00000000ca0c6000] (64MB) [ 0.287950] amd_uncore: 4 amd_df counters detected [ 0.287958] amd_uncore: 6 amd_l3 counters detected [ 0.288038] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.288715] Initialise system trusted keyrings [ 0.288723] Key type blacklist registered [ 0.288758] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.290280] zbud: loaded [ 0.290536] integrity: Platform Keyring initialized [ 0.290540] integrity: Machine keyring initialized [ 0.290541] Key type asymmetric registered [ 0.290542] Asymmetric key parser 'x509' registered [ 0.799260] Freeing initrd memory: 81128K [ 0.804110] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 0.804147] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.804191] io scheduler mq-deadline registered [ 0.805226] pcieport 0000:00:01.2: PME: Signaling with IRQ 26 [ 0.805326] pcieport 0000:00:01.2: AER: enabled with IRQ 26 [ 0.805528] pcieport 0000:00:01.5: PME: Signaling with IRQ 27 [ 0.805611] pcieport 0000:00:01.5: AER: enabled with IRQ 27 [ 0.805806] pcieport 0000:00:01.6: PME: Signaling with IRQ 28 [ 0.805893] pcieport 0000:00:01.6: AER: enabled with IRQ 28 [ 0.806081] pcieport 0000:00:08.1: PME: Signaling with IRQ 29 [ 0.806355] pcieport 0000:00:08.2: PME: Signaling with IRQ 30 [ 0.806434] pcieport 0000:00:08.2: AER: enabled with IRQ 30 [ 0.806574] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.807471] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.808187] 0000:03:00.1: ttyS0 at I/O 0xe800 (irq = 31, base_baud = 115200) is a 16550A [ 0.808585] 0000:03:00.2: ttyS1 at I/O 0xe400 (irq = 32, base_baud = 115200) is a 16550A [ 0.808734] Linux agpgart interface v0.103 [ 0.823912] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1) [ 0.864158] AMD-Vi: AMD IOMMUv2 loaded and initialized [ 0.864874] i8042: PNP: No PS/2 controller found. [ 0.864875] i8042: Probing ports directly. [ 1.312379] tsc: Refined TSC clocksource calibration: 3293.812 MHz [ 1.312398] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f7a76a4ebd, max_idle_ns: 440795230158 ns [ 1.312428] clocksource: Switched to clocksource tsc [ 1.422033] i8042: Can't read CTR while initializing i8042 [ 1.422034] i8042: probe of i8042 failed with error -5 [ 1.422115] mousedev: PS/2 mouse device common for all mice [ 1.422138] rtc_cmos 00:02: RTC can wake from S4 [ 1.422461] rtc_cmos 00:02: registered as rtc0 [ 1.422498] rtc_cmos 00:02: setting system clock to 2024-02-14T05:39:43 UTC (1707889183) [ 1.422530] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.422817] efifb: probing for efifb [ 1.422825] efifb: framebuffer at 0xe0000000, using 1984k, total 1984k [ 1.422827] efifb: mode is 800x600x32, linelength=3328, pages=1 [ 1.422828] efifb: scrolling: redraw [ 1.422828] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.422921] Console: switching to colour frame buffer device 100x37 [ 1.423457] fb0: EFI VGA frame buffer device [ 1.433860] NET: Registered PF_INET6 protocol family [ 1.438125] Segment Routing with IPv6 [ 1.438133] In-situ OAM (IOAM) with IPv6 [ 1.438153] mip6: Mobile IPv6 [ 1.438157] NET: Registered PF_PACKET protocol family [ 1.438179] mpls_gso: MPLS GSO support [ 1.438783] microcode: CPU0: patch_level=0x08108109 [ 1.438787] microcode: CPU1: patch_level=0x08108109 [ 1.438791] microcode: CPU2: patch_level=0x08108109 [ 1.438796] microcode: CPU3: patch_level=0x08108109 [ 1.438802] microcode: CPU4: patch_level=0x08108109 [ 1.438806] microcode: CPU5: patch_level=0x08108109 [ 1.438811] microcode: CPU6: patch_level=0x08108109 [ 1.438816] microcode: CPU7: patch_level=0x08108109 [ 1.438821] microcode: Microcode Update Driver: v2.2. [ 1.438827] IPI shorthand broadcast: enabled [ 1.438850] sched_clock: Marking stable (1438370576, 347508)->(1641067552, -202349468) [ 1.439036] registered taskstats version 1 [ 1.439155] Loading compiled-in X.509 certificates [ 1.452615] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.452632] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 1.455486] zswap: loaded using pool lzo/zbud [ 1.455670] Key type .fscrypt registered [ 1.455672] Key type fscrypt-provisioning registered [ 1.459066] Key type encrypted registered [ 1.459069] AppArmor: AppArmor sha1 policy hashing enabled [ 1.459082] ima: Allocated hash algorithm: sha256 [ 1.494346] ima: No architecture policies found [ 1.494368] evm: Initialising EVM extended attributes: [ 1.494369] evm: security.selinux [ 1.494370] evm: security.SMACK64 (disabled) [ 1.494370] evm: security.SMACK64EXEC (disabled) [ 1.494371] evm: security.SMACK64TRANSMUTE (disabled) [ 1.494372] evm: security.SMACK64MMAP (disabled) [ 1.494372] evm: security.apparmor [ 1.494373] evm: security.ima [ 1.494373] evm: security.capability [ 1.494373] evm: HMAC attrs: 0x1 [ 1.561195] Freeing unused decrypted memory: 2036K [ 1.561765] Freeing unused kernel image (initmem) memory: 2784K [ 1.584375] Write protecting the kernel read-only data: 26624k [ 1.585541] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 1.585823] Freeing unused kernel image (rodata/data gap) memory: 1240K [ 1.626008] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.626019] Run /init as init process [ 1.626021] with arguments: [ 1.626022] /init [ 1.626023] splash [ 1.626024] with environment: [ 1.626024] HOME=/ [ 1.626025] TERM=linux [ 1.626025] BOOT_IMAGE=/boot/vmlinuz-6.1.0-17-rt-amd64 [ 1.693602] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.693643] ACPI: button: Power Button [PWRB] [ 1.693731] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.703377] ACPI: video: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 1.703525] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:11/LNXVIDEO:01/input/input2 [ 1.710583] ACPI: button: Power Button [PWRF] [ 1.720634] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.720639] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 1.720716] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.734267] ACPI: bus type drm_connector registered [ 1.744675] ACPI: bus type USB registered [ 1.744702] usbcore: registered new interface driver usbfs [ 1.744711] usbcore: registered new interface driver hub [ 1.744739] usbcore: registered new device driver usb [ 1.749964] SCSI subsystem initialized [ 1.760994] ehci-pci 0000:03:00.4: EHCI Host Controller [ 1.761008] ehci-pci 0000:03:00.4: new USB bus registered, assigned bus number 1 [ 1.761169] ehci-pci 0000:03:00.4: irq 35, io mem 0xfcd14000 [ 1.768192] nvme nvme0: pci function 0000:01:00.0 [ 1.768564] libata version 3.00 loaded. [ 1.774553] nvme nvme0: missing or invalid SUBNQN field. [ 1.778860] r8169 0000:03:00.0 eth0: RTL8168ep/8111ep, 6c:4b:90:cd:99:1d, XID 502, IRQ 39 [ 1.778863] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 1.778865] r8169 0000:03:00.0 eth0: DASH disabled [ 1.780365] ehci-pci 0000:03:00.4: USB 0.0 started, EHCI 1.00 [ 1.780422] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.780425] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.780427] usb usb1: Product: EHCI Host Controller [ 1.780428] usb usb1: Manufacturer: Linux 6.1.0-17-rt-amd64 ehci_hcd [ 1.780429] usb usb1: SerialNumber: 0000:03:00.4 [ 1.780568] hub 1-0:1.0: USB hub found [ 1.780574] hub 1-0:1.0: 1 port detected [ 1.780676] xhci_hcd 0000:04:00.3: xHCI Host Controller [ 1.780686] xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 2 [ 1.780867] xhci_hcd 0000:04:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410 [ 1.781576] xhci_hcd 0000:04:00.3: xHCI Host Controller [ 1.781578] xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 3 [ 1.781581] xhci_hcd 0000:04:00.3: Host supports USB 3.1 Enhanced SuperSpeed [ 1.781662] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.781664] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.781666] usb usb2: Product: xHCI Host Controller [ 1.781666] usb usb2: Manufacturer: Linux 6.1.0-17-rt-amd64 xhci-hcd [ 1.781667] usb usb2: SerialNumber: 0000:04:00.3 [ 1.781793] hub 2-0:1.0: USB hub found [ 1.781810] hub 2-0:1.0: 4 ports detected [ 1.782135] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.782169] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.782172] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.782173] usb usb3: Product: xHCI Host Controller [ 1.782174] usb usb3: Manufacturer: Linux 6.1.0-17-rt-amd64 xhci-hcd [ 1.782175] usb usb3: SerialNumber: 0000:04:00.3 [ 1.782287] hub 3-0:1.0: USB hub found [ 1.782303] hub 3-0:1.0: 4 ports detected [ 1.782779] xhci_hcd 0000:04:00.4: xHCI Host Controller [ 1.782783] xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 4 [ 1.782921] xhci_hcd 0000:04:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410 [ 1.783540] xhci_hcd 0000:04:00.4: xHCI Host Controller [ 1.783542] xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 5 [ 1.783544] xhci_hcd 0000:04:00.4: Host supports USB 3.1 Enhanced SuperSpeed [ 1.783608] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.783611] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.783612] usb usb4: Product: xHCI Host Controller [ 1.783613] usb usb4: Manufacturer: Linux 6.1.0-17-rt-amd64 xhci-hcd [ 1.783614] usb usb4: SerialNumber: 0000:04:00.4 [ 1.783715] hub 4-0:1.0: USB hub found [ 1.783727] hub 4-0:1.0: 1 port detected [ 1.783846] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.783879] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 1.783881] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.783882] usb usb5: Product: xHCI Host Controller [ 1.783883] usb usb5: Manufacturer: Linux 6.1.0-17-rt-amd64 xhci-hcd [ 1.783884] usb usb5: SerialNumber: 0000:04:00.4 [ 1.783999] hub 5-0:1.0: USB hub found [ 1.784011] hub 5-0:1.0: 1 port detected [ 1.802693] nvme nvme0: allocated 32 MiB host memory buffer. [ 1.834398] nvme nvme0: 8/0/0 default/read/poll queues [ 1.837322] nvme nvme0: Ignoring bogus Namespace Identifiers [ 1.839134] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 [ 1.845405] ahci 0000:05:00.0: version 3.0 [ 1.977126] r8169 0000:03:00.0 eth0: rtl_ep_ocp_read_cond == 0 (loop: 10, delay: 10000). [ 1.992411] r8169 0000:03:00.0 enp3s0f0: renamed from eth0 [ 2.040419] usb 2-3: new high-speed USB device number 2 using xhci_hcd [ 2.190501] usb 2-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=60.52 [ 2.190504] usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.190506] usb 2-3: Product: USB2.0 Hub [ 2.230153] hub 2-3:1.0: USB hub found [ 2.230580] hub 2-3:1.0: 4 ports detected [ 2.294495] usb: port power management may be unreliable [ 2.584433] usb 2-3.1: new high-speed USB device number 3 using xhci_hcd [ 2.687598] usb 2-3.1: New USB device found, idVendor=0e8d, idProduct=7612, bcdDevice= 1.00 [ 2.687601] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.687603] usb 2-3.1: Product: 802.11ac WLAN [ 2.687604] usb 2-3.1: Manufacturer: MediaTek Inc. [ 2.687605] usb 2-3.1: SerialNumber: 000000000 [ 2.768358] usb 2-3.2: new high-speed USB device number 4 using xhci_hcd [ 2.863572] ahci 0000:05:00.0: failed stop FIS RX (-16) [ 2.863589] ahci 0000:05:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 2.863593] ahci 0000:05:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 2.863990] scsi host0: ahci [ 2.864147] ata1: SATA max UDMA/133 abar m2048@0xfcc00000 port 0xfcc00100 irq 66 [ 2.870069] usb 2-3.2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 2.870075] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.870077] usb 2-3.2: Product: USB 2.0 Hub [ 2.933900] hub 2-3.2:1.0: USB hub found [ 2.934193] hub 2-3.2:1.0: 4 ports detected [ 3.016358] usb 2-3.3: new high-speed USB device number 5 using xhci_hcd [ 3.055952] [drm] amdgpu kernel modesetting enabled. [ 3.061687] amdgpu: Topology: Add APU node [0x0:0x0] [ 3.061896] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x17AA:0x3151 0xDA). [ 3.061909] [drm] register mmio base: 0xFCB00000 [ 3.061910] [drm] register mmio size: 524288 [ 3.061981] [drm] add ip block number 0 [ 3.061982] [drm] add ip block number 1 [ 3.061984] [drm] add ip block number 2 [ 3.061985] [drm] add ip block number 3 [ 3.061986] [drm] add ip block number 4 [ 3.061987] [drm] add ip block number 5 [ 3.061988] [drm] add ip block number 6 [ 3.061990] [drm] add ip block number 7 [ 3.061991] [drm] add ip block number 8 [ 3.062024] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/picasso_gpu_info.bin [ 3.085168] [drm] BIOS signature incorrect 0 0 [ 3.085192] amdgpu 0000:04:00.0: amdgpu: Fetched VBIOS from ROM BAR [ 3.085194] amdgpu: ATOM BIOS: 113-PICASSO-114 [ 3.085228] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/picasso_sdma.bin [ 3.085230] [drm] VCN decode is enabled in VM mode [ 3.085230] [drm] VCN encode is enabled in VM mode [ 3.085231] [drm] JPEG decode is enabled in VM mode [ 3.085301] Console: switching to colour dummy device 80x25 [ 3.085342] amdgpu 0000:04:00.0: vgaarb: deactivate vga console [ 3.085343] amdgpu 0000:04:00.0: amdgpu: Trusted Memory Zone (TMZ) feature enabled [ 3.085373] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 3.085379] amdgpu 0000:04:00.0: amdgpu: VRAM: 256M 0x000000F400000000 - 0x000000F40FFFFFFF (256M used) [ 3.085381] amdgpu 0000:04:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 3.085382] amdgpu 0000:04:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF [ 3.085387] [drm] Detected VRAM RAM=256M, BAR=256M [ 3.085388] [drm] RAM width 64bits DDR4 [ 3.085428] [drm] amdgpu: 256M of VRAM memory ready [ 3.085429] [drm] amdgpu: 3807M of GTT memory ready. [ 3.085441] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 3.085583] [drm] PCIE GART of 1024M enabled. [ 3.085584] [drm] PTB located at 0x000000F400A00000 [ 3.085849] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/picasso_asd.bin [ 3.085875] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/picasso_ta.bin [ 3.085877] amdgpu 0000:04:00.0: amdgpu: PSP runtime database doesn't exist [ 3.085878] amdgpu 0000:04:00.0: amdgpu: PSP runtime database doesn't exist [ 3.086009] amdgpu: hwmgr_sw_init smu backed is smu10_smu [ 3.086033] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/raven_dmcu.bin [ 3.086052] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/picasso_pfp.bin [ 3.086067] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/picasso_me.bin [ 3.086086] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/picasso_ce.bin [ 3.086105] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/picasso_rlc_am4.bin [ 3.086182] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/picasso_mec.bin [ 3.086247] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/picasso_mec2.bin [ 3.086962] amdgpu 0000:04:00.0: firmware: direct-loading firmware amdgpu/picasso_vcn.bin [ 3.086964] [drm] Found VCN firmware Version ENC: 1.13 DEC: 2 VEP: 0 Revision: 4 [ 3.086973] amdgpu 0000:04:00.0: amdgpu: Will use PSP to load VCN firmware [ 3.107711] [drm] reserve 0x400000 from 0xf40fc00000 for PSP TMR [ 3.171705] amdgpu 0000:04:00.0: amdgpu: RAS: optional ras ta ucode is not available [ 3.176706] amdgpu 0000:04:00.0: amdgpu: RAP: optional rap ta ucode is not available [ 3.178618] ata1: SATA link down (SStatus 0 SControl 300) [ 3.180368] [drm] DM_PPLIB: values for F clock [ 3.180370] [drm] DM_PPLIB: 400000 in kHz, 3099 in mV [ 3.180371] [drm] DM_PPLIB: 933000 in kHz, 3574 in mV [ 3.180372] [drm] DM_PPLIB: 1200000 in kHz, 4399 in mV [ 3.180373] [drm] DM_PPLIB: 1333000 in kHz, 4399 in mV [ 3.180374] [drm] DM_PPLIB: values for DCF clock [ 3.180375] [drm] DM_PPLIB: 300000 in kHz, 3099 in mV [ 3.180376] [drm] DM_PPLIB: 600000 in kHz, 3574 in mV [ 3.180376] [drm] DM_PPLIB: 626000 in kHz, 4250 in mV [ 3.180377] [drm] DM_PPLIB: 654000 in kHz, 4399 in mV [ 3.180668] [drm] Display Core initialized with v3.2.207! [ 3.258454] [drm] kiq ring mec 2 pipe 1 q 0 [ 3.268699] usb 2-3.3: New USB device found, idVendor=1bcf, idProduct=28c4, bcdDevice= 1.11 [ 3.268704] usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.268706] usb 2-3.3: Product: FHD Camera Microphone [ 3.268707] usb 2-3.3: Manufacturer: HX 210107 [ 3.268708] usb 2-3.3: SerialNumber: 01.00.00 [ 3.272044] [drm] VCN decode and encode initialized successfully(under SPG Mode). [ 3.274336] kfd kfd: amdgpu: Allocated 3969056 bytes on gart [ 3.274400] amdgpu: sdma_bitmap: 3 [ 3.274594] amdgpu: Topology: Add APU node [0x15d8:0x1002] [ 3.274597] kfd kfd: amdgpu: added device 1002:15d8 [ 3.274609] amdgpu 0000:04:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 11, active_cu_number 11 [ 3.274707] amdgpu 0000:04:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0 [ 3.274709] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0 [ 3.274711] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0 [ 3.274712] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0 [ 3.274714] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0 [ 3.274715] amdgpu 0000:04:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0 [ 3.274716] amdgpu 0000:04:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0 [ 3.274717] amdgpu 0000:04:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0 [ 3.274718] amdgpu 0000:04:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0 [ 3.274720] amdgpu 0000:04:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 [ 3.274721] amdgpu 0000:04:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1 [ 3.274722] amdgpu 0000:04:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1 [ 3.274723] amdgpu 0000:04:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1 [ 3.274725] amdgpu 0000:04:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1 [ 3.274726] amdgpu 0000:04:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1 [ 3.280955] [drm] Initialized amdgpu 3.49.0 20150101 for 0000:04:00.0 on minor 0 [ 3.286161] fbcon: amdgpudrmfb (fb0) is primary device [ 3.344360] usb 2-3.2.1: new low-speed USB device number 6 using xhci_hcd [ 3.393680] Console: switching to colour frame buffer device 240x67 [ 3.412381] amdgpu 0000:04:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 3.556354] raid6: avx2x4 gen() 26702 MB/s [ 3.624356] raid6: avx2x2 gen() 30547 MB/s [ 3.637766] usb 2-3.2.1: New USB device found, idVendor=046a, idProduct=004c, bcdDevice= 1.00 [ 3.637770] usb 2-3.2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.692354] raid6: avx2x1 gen() 27338 MB/s [ 3.692356] raid6: using algorithm avx2x2 gen() 30547 MB/s [ 3.704355] usb 2-3.4: new full-speed USB device number 7 using xhci_hcd [ 3.743291] hid: raw HID events driver (C) Jiri Kosina [ 3.760354] raid6: .... xor() 18039 MB/s, rmw enabled [ 3.760356] raid6: using avx2x2 recovery algorithm [ 3.761151] xor: automatically using best checksumming function avx [ 3.761786] async_tx: api initialized (async) [ 3.769903] usbcore: registered new interface driver usbhid [ 3.769905] usbhid: USB HID core driver [ 3.771622] input: HID 046a:004c as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.0/0003:046A:004C.0001/input/input3 [ 3.832556] hid-generic 0003:046A:004C.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:004c] on usb-0000:04:00.3-3.2.1/input0 [ 3.832722] input: HID 046a:004c as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb2/2-3/2-3.2/2-3.2.1/2-3.2.1:1.1/0003:046A:004C.0002/input/input4 [ 3.832806] hid-generic 0003:046A:004C.0002: input,hidraw1: USB HID v1.11 Mouse [HID 046a:004c] on usb-0000:04:00.3-3.2.1/input1 [ 3.855702] usb 2-3.4: New USB device found, idVendor=0bda, idProduct=c123, bcdDevice= 0.00 [ 3.855708] usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.855709] usb 2-3.4: Product: Bluetooth Radio [ 3.855711] usb 2-3.4: Manufacturer: Realtek [ 3.855712] usb 2-3.4: SerialNumber: 00e04c000001 [ 4.036370] usb 2-3.2.2: new full-speed USB device number 8 using xhci_hcd [ 4.109120] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=yes [ 4.201000] PM: Image not found (code -22) [ 4.287373] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Quota mode: none. [ 4.296882] usb 2-3.2.2: New USB device found, idVendor=04f3, idProduct=0732, bcdDevice=11.12 [ 4.296887] usb 2-3.2.2: New USB device strings: Mfr=4, Product=14, SerialNumber=0 [ 4.296889] usb 2-3.2.2: Product: Touchscreen [ 4.296891] usb 2-3.2.2: Manufacturer: ELAN [ 4.342141] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 4.388004] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb2/2-3/2-3.2/2-3.2.2/2-3.2.2:1.0/0003:04F3:0732.0003/input/input5 [ 4.388074] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb2/2-3/2-3.2/2-3.2.2/2-3.2.2:1.0/0003:04F3:0732.0003/input/input6 [ 4.388097] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb2/2-3/2-3.2/2-3.2.2/2-3.2.2:1.0/0003:04F3:0732.0003/input/input7 [ 4.388175] hid-generic 0003:04F3:0732.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:04:00.3-3.2.2/input0 [ 4.485258] systemd[1]: Inserted module 'autofs4' [ 4.568358] usb 2-3.2.3: new high-speed USB device number 9 using xhci_hcd [ 4.583604] systemd[1]: systemd 252.19-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.583610] systemd[1]: Detected architecture x86-64. [ 4.584666] systemd[1]: Hostname set to . [ 4.728157] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly. [ 4.770227] systemd[1]: Queued start job for default target graphical.target. [ 4.777695] usb 2-3.2.3: New USB device found, idVendor=13b1, idProduct=0041, bcdDevice=30.00 [ 4.777698] usb 2-3.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 4.777700] usb 2-3.2.3: Product: Linksys USB3GIGV1 [ 4.777701] usb 2-3.2.3: Manufacturer: Linksys [ 4.777701] usb 2-3.2.3: SerialNumber: 000001000000 [ 4.797489] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 4.797903] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 4.798353] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 4.798628] systemd[1]: Created slice user.slice - User and Session Slice. [ 4.798708] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 4.798895] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 4.798957] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 4.798986] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups. [ 4.799002] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 4.799015] systemd[1]: Reached target slices.target - Slice Units. [ 4.799045] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 4.799185] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 4.799253] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 4.799498] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 4.799626] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 4.799753] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 4.800026] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 4.800140] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 4.801083] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 4.801968] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 4.802854] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 4.803660] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 4.804862] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 4.805973] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 4.806814] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 4.807749] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 4.808806] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 4.812513] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 4.813835] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 4.815183] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 4.815290] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 4.816887] systemd[1]: Starting systemd-journald.service - Journal Service... [ 4.819458] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 4.820624] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 4.821682] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 4.822520] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 4.822554] device-mapper: uevent: version 1.0.3 [ 4.822625] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 4.823115] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 4.823328] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 4.823490] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 4.823647] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 4.823927] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 4.824278] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 4.824427] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 4.824690] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 4.824823] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 4.825047] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 4.825159] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 4.825371] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 4.825480] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 4.826484] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 4.828589] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 4.829107] fuse: init (API version 7.37) [ 4.833488] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 4.833628] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 4.834804] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 4.835187] loop: module loaded [ 4.836127] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 4.836346] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 4.836738] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 4.839882] EXT4-fs (nvme0n1p3): re-mounted. Quota mode: none. [ 4.840366] lp: driver loaded but no devices found [ 4.841512] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 4.841791] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 4.841989] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 4.842020] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 4.842846] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... [ 4.843780] systemd[1]: Starting systemd-sysusers.service - Create System Users... [ 4.846664] ppdev: user-space parallel port driver [ 4.859644] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 4.860754] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 4.861047] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed. [ 4.861251] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 4.880666] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 4.888551] systemd[1]: Started systemd-journald.service - Journal Service. [ 4.897127] systemd-journald[409]: Received client request to flush runtime journal. [ 5.159917] usbcore: registered new device driver r8152-cfgselector [ 5.217402] acpi_cpufreq: overriding BIOS provided _PSD data [ 5.268649] IPMI message handler: version 39.2 [ 5.285228] ipmi device interface [ 5.291602] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer [ 5.291605] RAPL PMU: hw unit of domain package 2^-16 Joules [ 5.296133] input: PC Speaker as /devices/platform/pcspkr/input/input9 [ 5.296239] ipmi_si: IPMI System Interface driver [ 5.297045] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 5.297960] ipmi_si: Unable to find any System Interface(s) [ 5.298234] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address [ 5.298276] cryptd: max_cpu_qlen set to 1000 [ 5.300808] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) [ 5.310184] Adding 1000444k swap on /dev/nvme0n1p8. Priority:-2 extents:1 across:1000444k SSFS [ 5.316531] AVX2 version of gcm_enc/dec engaged. [ 5.316566] AES CTR mode by8 optimization enabled [ 5.361676] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.361836] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 5.361960] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 5.362082] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.365719] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 5.366024] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 5.490252] rtw_8822ce 0000:02:00.0: enabling device (0000 -> 0003) [ 5.491517] rtw_8822ce 0000:02:00.0: firmware: direct-loading firmware rtw88/rtw8822c_wow_fw.bin [ 5.491527] rtw_8822ce 0000:02:00.0: Firmware version 9.9.4, H2C version 15 [ 5.491877] rtw_8822ce 0000:02:00.0: firmware: direct-loading firmware rtw88/rtw8822c_fw.bin [ 5.491880] rtw_8822ce 0000:02:00.0: Firmware version 9.9.14, H2C version 15 [ 5.525820] r8152-cfgselector 2-3.2.3: reset high-speed USB device number 9 using xhci_hcd [ 5.553366] ccp 0000:04:00.2: ccp enabled [ 5.553376] ccp 0000:04:00.2: psp: unable to access the device: you might be running a broken BIOS. [ 5.556534] rtw_8822ce 0000:02:00.0 wlp2s0: renamed from wlan0 [ 5.558572] SVM: TSC scaling supported [ 5.558574] kvm: Nested Virtualization enabled [ 5.558575] SVM: kvm: Nested Paging enabled [ 5.558577] SEV supported: 16 ASIDs [ 5.558577] SEV-ES supported: 4294967295 ASIDs [ 5.558598] SVM: Virtual VMLOAD VMSAVE supported [ 5.558599] SVM: Virtual GIF supported [ 5.558599] SVM: LBR virtualization supported [ 5.564160] MCE: In-kernel MCE decoding enabled. [ 5.569401] intel_rapl_common: Found RAPL domain package [ 5.569404] intel_rapl_common: Found RAPL domain core [ 5.779752] r8152 2-3.2.3:1.0: firmware: direct-loading firmware rtl_nic/rtl8153a-3.fw [ 5.857950] r8152 2-3.2.3:1.0: load rtl8153a-3 v2 02/07/20 successfully [ 5.901247] audit: type=1400 audit(1707889187.975:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=646 comm="apparmor_parser" [ 5.903186] audit: type=1400 audit(1707889187.975:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=651 comm="apparmor_parser" [ 5.904671] audit: type=1400 audit(1707889187.979:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=647 comm="apparmor_parser" [ 5.904677] audit: type=1400 audit(1707889187.979:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=647 comm="apparmor_parser" [ 5.904903] audit: type=1400 audit(1707889187.979:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=650 comm="apparmor_parser" [ 5.904908] audit: type=1400 audit(1707889187.979:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=650 comm="apparmor_parser" [ 5.904911] audit: type=1400 audit(1707889187.979:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=650 comm="apparmor_parser" [ 5.905004] audit: type=1400 audit(1707889187.979:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=652 comm="apparmor_parser" [ 5.905942] audit: type=1400 audit(1707889187.979:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=645 comm="apparmor_parser" [ 5.905947] audit: type=1400 audit(1707889187.979:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=645 comm="apparmor_parser" [ 5.920478] r8152 2-3.2.3:1.0 eth0: v1.12.13 [ 5.920516] usbcore: registered new interface driver r8152 [ 5.924043] usbcore: registered new interface driver cdc_ether [ 5.964833] snd_pci_acp3x 0000:04:00.5: ACP audio mode : 2 [ 6.007378] mc: Linux media interface: v0.10 [ 6.011926] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 6.019796] videodev: Linux video capture interface: v2.00 [ 6.032157] r8152 2-3.2.3:1.0 enxe89f80831fc2: renamed from eth0 [ 6.040412] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client [ 6.052678] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 6.055306] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card1/input10 [ 6.086800] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card1/input11 [ 6.104859] ec_master: loading out-of-tree module taints kernel. [ 6.105109] ec_master: module verification failed: signature and/or required key missing - tainting kernel [ 6.108600] usb 2-3.1: reset high-speed USB device number 3 using xhci_hcd [ 6.116855] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card1/input12 [ 6.130783] Bluetooth: Core ver 2.22 [ 6.130817] NET: Registered PF_BLUETOOTH protocol family [ 6.130818] Bluetooth: HCI device and connection manager initialized [ 6.130822] Bluetooth: HCI socket layer initialized [ 6.130824] Bluetooth: L2CAP socket layer initialized [ 6.130828] Bluetooth: SCO socket layer initialized [ 6.135515] EtherCAT: Master driver 1.5.2 1.5.2.413.g1ace2f4-1+320.1 [ 6.135922] EtherCAT: 1 master waiting for devices. [ 6.148872] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb2/2-3/2-3.2/2-3.2.2/2-3.2.2:1.0/0003:04F3:0732.0003/input/input13 [ 6.149011] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb2/2-3/2-3.2/2-3.2.2/2-3.2.2:1.0/0003:04F3:0732.0003/input/input14 [ 6.149080] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb2/2-3/2-3.2/2-3.2.2/2-3.2.2:1.0/0003:04F3:0732.0003/input/input15 [ 6.149222] hid-multitouch 0003:04F3:0732.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:04:00.3-3.2.2/input0 [ 6.149515] usbcore: registered new interface driver btusb [ 6.151971] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822 [ 6.154966] Bluetooth: hci0: RTL: rom_version status=0 version=3 [ 6.154970] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin [ 6.156308] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8822cu_fw.bin [ 6.156331] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin [ 6.156931] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8822cu_config.bin [ 6.156954] Bluetooth: hci0: RTL: cfg_sz 6, total sz 35458 [ 6.165874] ec_generic: EtherCAT master generic Ethernet device module 1.5.2 1.5.2.413.g1ace2f4-1+320.1 [ 6.165888] EtherCAT: Accepting 6C:4B:90:CD:99:1D as main device for master 0. [ 6.165900] ec_generic: Binding socket to interface 2 (enp3s0f0). [ 6.200887] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 6.201038] EtherCAT 0: Link state of ecm0 changed to UP. [ 6.211331] mt76x2u 2-3.1:1.0: ASIC revision: 76120044 [ 6.264152] usb 2-3.3: 3:1: cannot get freq at ep 0x86 [ 6.285462] mt76x2u 2-3.1:1.0: firmware: direct-loading firmware mt7662_rom_patch.bin [ 6.285470] mt76x2u 2-3.1:1.0: ROM patch build: 20141115060606a [ 6.371376] process '/usr/bin/anydesk' started with executable stack [ 6.398803] NET: Registered PF_QIPCRTR protocol family [ 6.426185] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.426188] Bluetooth: BNEP filters: protocol multicast [ 6.426193] Bluetooth: BNEP socket layer initialized [ 6.469502] mt76x2u 2-3.1:1.0: firmware: direct-loading firmware mt7662.bin [ 6.469510] mt76x2u 2-3.1:1.0: Firmware Version: 0.0.00 [ 6.469512] mt76x2u 2-3.1:1.0: Build: 1 [ 6.469514] mt76x2u 2-3.1:1.0: Build Time: 201507311614____ [ 6.520415] usb 2-3.3: 3:2: cannot get freq at ep 0x86 [ 6.606950] Bluetooth: hci0: RTL: fw version 0xffb8abd3 [ 6.743166] Bluetooth: MGMT ver 1.22 [ 6.747051] NET: Registered PF_ALG protocol family [ 6.776286] usb 2-3.3: 3:3: cannot get freq at ep 0x86 [ 6.844365] EtherCAT 0: Link state of ecm0 changed to DOWN. [ 6.872371] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC) [ 7.072623] r8169 0000:03:00.0 enp3s0f0: rtl_ep_ocp_read_cond == 0 (loop: 10, delay: 10000). [ 7.220695] r8169 0000:03:00.0 enp3s0f0: Link is Down [ 7.842571] usb 2-3.3: Warning! Unlikely big volume range (=3896), cval->res is probably wrong. [ 7.842575] usb 2-3.3: [7] FU [Mic Capture Volume] ch = 1, val = 200/4096/1 [ 7.842761] usbcore: registered new interface driver snd-usb-audio [ 7.847757] usb 2-3.3: Found UVC 1.00 device FHD Camera Microphone (1bcf:28c4) [ 7.905787] usb 2-3.3: Failed to query (GET_INFO) UVC control 12 on unit 1: -32 (exp. 1). [ 7.916409] usb 2-3.3: Failed to query (GET_INFO) UVC control 14 on unit 1: -32 (exp. 1). [ 7.943404] input: FHD Camera Microphone: FHD Came as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb2/2-3/2-3.3/2-3.3:1.0/input/input17 [ 7.943482] usbcore: registered new interface driver uvcvideo [ 8.219868] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 8.220646] usbcore: registered new interface driver mt76x2u [ 8.562019] mt76x2u 2-3.1:1.0 wlxe84e0640c5e3: renamed from wlan0 [ 8.612306] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 8.809203] r8169 0000:03:00.0 enp3s0f0: Link is Up - 100Mbps/Full - flow control off [ 8.816390] EtherCAT 0: Link state of ecm0 changed to UP. [ 9.203941] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f0: link becomes ready [ 9.220372] EtherCAT 0: 1 slave(s) responding on main device. [ 9.220378] EtherCAT 0: Slave states on main device: INIT. [ 9.220451] EtherCAT 0: Scanning bus. [ 9.291893] Bluetooth: RFCOMM TTY layer initialized [ 9.291914] Bluetooth: RFCOMM socket layer initialized [ 9.291942] Bluetooth: RFCOMM ver 1.11 [ 9.659920] usb 2-3.3: Failed to query (GET_DEF) UVC control 12 on unit 1: -32 (exp. 3). [ 9.667150] usb 2-3.3: Failed to query (GET_DEF) UVC control 12 on unit 1: -32 (exp. 3). [ 9.916655] EtherCAT 0: Bus scanning completed in 696 ms. [ 9.916663] EtherCAT 0: Using slave 0 as DC reference clock. [ 9.916666] EtherCAT ERROR 0: Failed to calculate bus topology. [ 9.916668] EtherCAT 0: Starting EoE thread. [ 9.928362] EtherCAT 0: Slave states on main device: PREOP. [ 10.540366] EtherCAT ERROR 0-0: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 10.540394] EtherCAT ERROR 0-0: AL status message 0x001E: "Invalid input configuration". [ 10.542365] EtherCAT 0-0: Acknowledged state PREOP. [ 10.543287] eoe: port 1(eoe0a20) entered blocking state [ 10.543308] eoe: port 1(eoe0a20) entered disabled state [ 10.543385] device eoe0a20 entered promiscuous mode [ 10.543430] eoe: port 1(eoe0a20) entered blocking state [ 10.543432] eoe: port 1(eoe0a20) entered listening state [ 14.616032] wlp2s0: authenticate with c8:0e:14:1c:0b:0f [ 15.117937] wlp2s0: send auth to c8:0e:14:1c:0b:0f (try 1/3) [ 15.437201] wlp2s0: authenticate with c8:0e:14:1c:0b:0f [ 15.437250] wlp2s0: send auth to c8:0e:14:1c:0b:0f (try 1/3) [ 15.562189] wlp2s0: authenticated [ 15.564387] wlp2s0: associate with c8:0e:14:1c:0b:0f (try 1/3) [ 15.568698] wlp2s0: RX AssocResp from c8:0e:14:1c:0b:0f (capab=0x1511 status=0 aid=4) [ 15.569018] wlp2s0: associated [ 15.622552] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by c8:0e:14:1c:0b:0f [ 15.760499] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 15.962540] usb 2-3.3: Failed to query (GET_DEF) UVC control 12 on unit 1: -32 (exp. 3). [ 15.976291] usb 2-3.3: Failed to query (GET_DEF) UVC control 12 on unit 1: -32 (exp. 3). [ 19.668220] wlxe84e0640c5e3: authenticate with c8:0e:14:1c:0b:0f [ 19.758208] wlxe84e0640c5e3: send auth to c8:0e:14:1c:0b:0f (try 1/3) [ 20.061034] wlxe84e0640c5e3: authenticate with c8:0e:14:1c:0b:0f [ 20.061040] wlxe84e0640c5e3: send auth to c8:0e:14:1c:0b:0f (try 1/3) [ 20.201663] wlxe84e0640c5e3: authenticated [ 20.204416] wlxe84e0640c5e3: associate with c8:0e:14:1c:0b:0f (try 1/3) [ 20.207717] wlxe84e0640c5e3: RX AssocResp from c8:0e:14:1c:0b:0f (capab=0x1511 status=0 aid=5) [ 20.225449] wlxe84e0640c5e3: associated [ 20.230635] wlxe84e0640c5e3: Limiting TX power to 20 (23 - 3) dBm as advertised by c8:0e:14:1c:0b:0f [ 20.316481] IPv6: ADDRCONF(NETDEV_CHANGE): wlxe84e0640c5e3: link becomes ready [ 25.632359] eoe: port 1(eoe0a20) entered learning state [ 40.740361] eoe: port 1(eoe0a20) entered forwarding state [ 40.740365] eoe: topology change detected, propagating [ 40.740420] IPv6: ADDRCONF(NETDEV_CHANGE): eoe: link becomes ready [ 53.324226] EtherCAT: Requesting master 0... [ 53.324230] EtherCAT: Successfully requested master 0. [ 53.351403] EtherCAT WARNING 0-0: No sending response for eoe0a20 after 100 tries. [ 53.363206] EtherCAT WARNING 0-0: Other mailbox protocol response for eoe0a20. [ 53.363255] EtherCAT ERROR 0-0: Reception of CoE upload response failed: No response. [ 53.363258] EtherCAT ERROR 0-0: Failed to read number of mapped PDO entries. [ 53.363259] EtherCAT WARNING 0-0: Failed to read PDO entries for PDO 0x1600. [ 53.363261] EtherCAT ERROR 0-0: Reception of CoE download response failed: No response. [ 53.363263] EtherCAT ERROR 0-0: Failed to process SDO request. [ 53.374491] EtherCAT WARNING 0-0: No sending response for eoe0a20 after 100 tries. [ 53.374830] EtherCAT ERROR 0-0: Reception of CoE download response failed: No response. [ 53.374833] EtherCAT ERROR 0-0: Failed to process SDO request. [ 53.379385] EtherCAT WARNING 0-0: No sending response for eoe0a20 after 100 tries. [ 53.385626] EtherCAT WARNING 0-0: No sending response for eoe0a20 after 100 tries. [ 53.386832] EtherCAT ERROR 0-0: Received unknown response while uploading SDO 0x1A00:00. [ 53.386834] EtherCAT DEBUG: 00 30 60 00 1A 03 00 00 00 00 [ 53.386838] EtherCAT ERROR 0-0: Failed to read number of mapped PDO entries. [ 53.386839] EtherCAT WARNING 0-0: Failed to read PDO entries for PDO 0x1A00. [ 53.409295] EtherCAT ERROR 0-0: SDO download 0x1A00:00 (1 bytes) aborted. [ 53.409299] EtherCAT ERROR 0-0: SDO abort message 0x06020000: "This object does not exist in the object directory". [ 53.409301] EtherCAT ERROR 0-0: Failed to process SDO request. [ 53.413694] EtherCAT WARNING 0-0: No sending response for eoe0a20 after 100 tries. [ 53.419305] EtherCAT WARNING 0-0: No sending response for eoe0a20 after 100 tries. [ 53.425049] EtherCAT ERROR 0-0: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 53.425093] EtherCAT ERROR 0-0: AL status message 0x001E: "Invalid input configuration". [ 53.426826] EtherCAT WARNING 0-0: Aborting SDO request, slave has error flag set. [ 53.427054] EtherCAT 0-0: Acknowledged state PREOP. [ 53.504378] EtherCAT ERROR 0-0: SDO download 0x1600:00 (1 bytes) aborted. [ 53.504382] EtherCAT ERROR 0-0: SDO abort message 0x06020000: "This object does not exist in the object directory". [ 53.504383] EtherCAT ERROR 0-0: Failed to process SDO request. [ 53.548715] EtherCAT 0: Domain0: Logical address 0x00000000, 12 byte, expected working counter 3. [ 53.548718] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 12 byte, type LRW. [ 53.548728] EtherCAT 0: Master thread exited. [ 53.548731] EtherCAT 0: Stopping EoE thread. [ 53.548766] EtherCAT 0: EoE thread exited. [ 53.548766] EtherCAT 0: Starting EoE thread. [ 53.548810] EtherCAT 0: Starting EtherCAT-OP thread. [ 53.548832] EtherCAT WARNING 0: 126 datagrams TIMED OUT! [ 53.700957] EtherCAT WARNING 0-0: No sending response for eoe0a20 after 100 tries. [ 53.744415] EtherCAT ERROR 0-0: Mailbox error response received - Unknown error reply code 0x0000. [ 53.744420] EtherCAT WARNING 0-0: Invalid mailbox response for eoe0a20. [ 53.780421] EtherCAT ERROR 0-0: Mailbox error response received - Unknown error reply code 0x0000. [ 53.780426] EtherCAT WARNING 0-0: Invalid mailbox response for eoe0a20. [ 53.828417] EtherCAT ERROR 0-0: Mailbox error response received - Unknown error reply code 0x0000. [ 53.828421] EtherCAT WARNING 0-0: Invalid mailbox response for eoe0a20. [ 55.356040] EtherCAT ERROR 0-0: Failed to set SAFEOP state, slave refused state change (PREOP + ERROR). [ 55.356382] EtherCAT ERROR 0-0: AL status message 0x0001: "Unspecified error". [ 55.362030] EtherCAT 0-0: Acknowledged state PREOP. [ 57.560367] EtherCAT WARNING 0: 2 datagrams UNMATCHED! [ 58.564366] EtherCAT WARNING 0: 2 datagrams UNMATCHED! [ 64.584368] EtherCAT WARNING 0: 6 datagrams UNMATCHED! [ 68.600367] EtherCAT WARNING 0: 2 datagrams UNMATCHED! [ 69.604367] EtherCAT WARNING 0: 4 datagrams UNMATCHED! [ 69.960366] usb 2-3.2.4: new high-speed USB device number 10 using xhci_hcd [ 70.174835] usb 2-3.2.4: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00 [ 70.174840] usb 2-3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 70.174842] usb 2-3.2.4: Product: Cruzer Blade [ 70.174843] usb 2-3.2.4: Manufacturer: SanDisk [ 70.174844] usb 2-3.2.4: SerialNumber: 04020123060821233409 [ 70.201293] usb-storage 2-3.2.4:1.0: USB Mass Storage device detected [ 70.201451] scsi host1: usb-storage 2-3.2.4:1.0 [ 70.201544] usbcore: registered new interface driver usb-storage [ 70.205350] usbcore: registered new interface driver uas [ 71.237429] scsi 1:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6 [ 71.243122] scsi 1:0:0:0: Attached scsi generic sg0 type 0 [ 71.246886] sd 1:0:0:0: [sda] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB) [ 71.248012] sd 1:0:0:0: [sda] Write Protect is off [ 71.248015] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 71.248389] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 71.271733] sda: sda1 [ 71.271880] sd 1:0:0:0: [sda] Attached SCSI removable disk [ 71.487236] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 72.612369] EtherCAT WARNING 0: 4 datagrams UNMATCHED! [ 73.616361] EtherCAT WARNING 0: 8 datagrams UNMATCHED! [ 74.616359] EtherCAT WARNING 0: 2 datagrams UNMATCHED! [ 76.624361] EtherCAT WARNING 0: 2 datagrams UNMATCHED! [ 78.632364] EtherCAT WARNING 0: 2 datagrams UNMATCHED! [ 85.232552] wlp2s0: disconnect from AP c8:0e:14:1c:0b:0f for new auth to c8:0e:14:1c:0b:0e [ 85.324940] wlp2s0: authenticate with c8:0e:14:1c:0b:0e [ 85.324970] wlp2s0: 80 MHz not supported, disabling VHT [ 85.845912] wlp2s0: send auth to c8:0e:14:1c:0b:0e (try 1/3) [ 86.168173] wlp2s0: authenticate with c8:0e:14:1c:0b:0e [ 86.168220] wlp2s0: send auth to c8:0e:14:1c:0b:0e (try 1/3) [ 86.288629] wlp2s0: authenticated [ 86.292361] wlp2s0: associate with c8:0e:14:1c:0b:0e (try 1/3) [ 86.299133] wlp2s0: RX ReassocResp from c8:0e:14:1c:0b:0e (capab=0x1031 status=0 aid=9) [ 86.299331] wlp2s0: associated [ 86.990720] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by c8:0e:14:1c:0b:0e