# Generated by stepconf 1.1 at Thu May 13 18:09:11 2021
# If you make changes to this file, they will be
# overwritten when you run stepconf again

[EMC]
MACHINE = my-mill2
DEBUG = 0

[DISPLAY]
DISPLAY = axis
EDITOR = gedit
POSITION_OFFSET = RELATIVE
POSITION_FEEDBACK = ACTUAL
ARCDIVISION = 64
GRIDS = 10mm 20mm 50mm 100mm 1in 2in 5in 10in
MAX_FEED_OVERRIDE = 1.2
MIN_SPINDLE_OVERRIDE = 0.5
MAX_SPINDLE_OVERRIDE = 1.2
DEFAULT_LINEAR_VELOCITY = 1.50
MIN_LINEAR_VELOCITY = 0
MAX_LINEAR_VELOCITY = 15.00
INTRO_GRAPHIC = linuxcnc.gif
INTRO_TIME = 5
PROGRAM_PREFIX = /home/jolyon/linuxcnc/nc_files
INCREMENTS = 5mm 1mm .5mm .1mm .05mm .01mm .005mm

[FILTER]
PROGRAM_EXTENSION = .png,.gif,.jpg Greyscale Depth Image
PROGRAM_EXTENSION = .py Python Script
png = image-to-gcode
gif = image-to-gcode
jpg = image-to-gcode
py = python

[TASK]
TASK = milltask
CYCLE_TIME = 0.010

[RS274NGC]
PARAMETER_FILE = linuxcnc.var

[EMCMOT]
EMCMOT = motmod
COMM_TIMEOUT = 1.0
COMM_WAIT = 0.010
BASE_PERIOD = 100000
SERVO_PERIOD = 1000000

[HAL]
HALFILE = my-mill2.hal
HALFILE = custom.hal
POSTGUI_HALFILE = custom_postgui.hal

[TRAJ]
AXES = 3
COORDINATES = X Y Z
LINEAR_UNITS = mm
ANGULAR_UNITS = degree
CYCLE_TIME = 0.010
DEFAULT_VELOCITY = 1.50
MAX_VELOCITY = 15.00

[EMCIO]
EMCIO = io
CYCLE_TIME = 0.100
TOOL_TABLE = tool.tbl

[AXIS_0]
TYPE = LINEAR
HOME = 228.0
MAX_VELOCITY = 15.0
MAX_ACCELERATION = 750.0
STEPGEN_MAXACCEL = 937.5
SCALE = 314.960629921
FERROR = 1
MIN_FERROR = .25
MIN_LIMIT = 0.0
MAX_LIMIT = 228.001
HOME_OFFSET = 228.000000
HOME_SEARCH_VEL = 8.000000
HOME_LATCH_VEL = 1.587500
HOME_SEQUENCE = 1

[AXIS_1]
TYPE = LINEAR
HOME = 120.0
MAX_VELOCITY = 15.0
MAX_ACCELERATION = 750.0
STEPGEN_MAXACCEL = 937.5
SCALE = 314.960629921
FERROR = 1
MIN_FERROR = .25
MIN_LIMIT = 0.0
MAX_LIMIT = 120.001
HOME_OFFSET = 120.000000
HOME_SEARCH_VEL = 8.000000
HOME_LATCH_VEL = 1.587500
HOME_SEQUENCE = 2

[AXIS_2]
TYPE = LINEAR
HOME = -40.0
MAX_VELOCITY = 15.0
MAX_ACCELERATION = 750.0
STEPGEN_MAXACCEL = 937.5
SCALE = 314.960629921
FERROR = 1
MIN_FERROR = .25
MIN_LIMIT = -180.0
MAX_LIMIT = 150.0
HOME_OFFSET = 0.000000
HOME_SEARCH_VEL = 8.000000
HOME_LATCH_VEL = 1.587500
HOME_SEQUENCE = 0