Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.8.2-20-gacab27a90 Machine configuration directory is '/home/cnc/linuxcnc/configs/Eldorado' Machine configuration file is 'Eldorado.ini' INIFILE=/home/cnc/linuxcnc/configs/Eldorado/Eldorado.ini VERSION=1.1 check_config: (trivkins kinematics) WARNING: INCONSISTENT coordinates specifications: trivkins coordinates=XYZZ [TRAJ]COORDINATES=XYZ PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI=halui DISPLAY=qtpyvcp COORDINATES=X Y Z KINEMATICS=trivkins coordinates=XYZZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui Found file(REL): ./Eldorado.hal Found file(REL): ./custom.hal Starting TASK program: milltask Starting DISPLAY program: qtpyvcp Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 444 cycles, min=0.000063, max=0.011185, avg=0.009729, 0 latency excursions (> 10x expected cycle time of 0.010000s) hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:10:45:b1 hm2_eth: discovered 7I76E-16 hm2/hm2_7i76e.0: Low Level init 0.15 hm2/hm2_7i76e.0: Smart Serial Firmware Version 43 Board hm2_7i76e.0.7i76.0.0 Hardware Mode 0 = standard Board hm2_7i76e.0.7i76.0.0 Software Mode 0 = io_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 1 = io_ana_spin Board hm2_7i76e.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv hm2/hm2_7i76e.0: 51 I/O Pins used: hm2/hm2_7i76e.0: IO Pin 000 (P1-01): StepGen #0, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 001 (P1-14): StepGen #0, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 002 (P1-02): StepGen #1, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 003 (P1-15): StepGen #1, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 004 (P1-03): StepGen #2, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 005 (P1-16): StepGen #2, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 006 (P1-04): StepGen #3, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 007 (P1-17): StepGen #3, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 008 (P1-05): StepGen #4, pin Direction (Output) hm2/hm2_7i76e.0: IO Pin 009 (P1-06): StepGen #4, pin Step (Output) hm2/hm2_7i76e.0: IO Pin 010 (P1-07): Smart Serial Interface #0, pin tx0 (Output) hm2/hm2_7i76e.0: IO Pin 011 (P1-08): Smart Serial Interface #0, pin rx0 (Input) hm2/hm2_7i76e.0: IO Pin 012 (P1-09): IOPort hm2/hm2_7i76e.0: IO Pin 013 (P1-10): IOPort hm2/hm2_7i76e.0: IO Pin 014 (P1-11): Encoder #0, pin Index (Input) hm2/hm2_7i76e.0: IO Pin 015 (P1-12): Encoder #0, pin B (Input) hm2/hm2_7i76e.0: IO Pin 016 (P1-13): Encoder #0, pin A (Input) hm2/hm2_7i76e.0: IO Pin 017 (P2-01): IOPort hm2/hm2_7i76e.0: IO Pin 018 (P2-14): IOPort hm2/hm2_7i76e.0: IO Pin 019 (P2-02): IOPort hm2/hm2_7i76e.0: IO Pin 020 (P2-15): IOPort hm2/hm2_7i76e.0: IO Pin 021 (P2-03): IOPort hm2/hm2_7i76e.0: IO Pin 022 (P2-16): IOPort hm2/hm2_7i76e.0: IO Pin 023 (P2-04): IOPort hm2/hm2_7i76e.0: IO Pin 024 (P2-17): IOPort hm2/hm2_7i76e.0: IO Pin 025 (P2-05): IOPort hm2/hm2_7i76e.0: IO Pin 026 (P2-06): IOPort hm2/hm2_7i76e.0: IO Pin 027 (P2-07): IOPort hm2/hm2_7i76e.0: IO Pin 028 (P2-08): IOPort hm2/hm2_7i76e.0: IO Pin 029 (P2-09): IOPort hm2/hm2_7i76e.0: IO Pin 030 (P2-10): IOPort hm2/hm2_7i76e.0: IO Pin 031 (P2-11): IOPort hm2/hm2_7i76e.0: IO Pin 032 (P2-12): IOPort hm2/hm2_7i76e.0: IO Pin 033 (P2-13): IOPort hm2/hm2_7i76e.0: IO Pin 034 (P3-01): IOPort hm2/hm2_7i76e.0: IO Pin 035 (P3-14): IOPort hm2/hm2_7i76e.0: IO Pin 036 (P3-02): IOPort hm2/hm2_7i76e.0: IO Pin 037 (P3-15): IOPort hm2/hm2_7i76e.0: IO Pin 038 (P3-03): IOPort hm2/hm2_7i76e.0: IO Pin 039 (P3-16): IOPort hm2/hm2_7i76e.0: IO Pin 040 (P3-04): IOPort hm2/hm2_7i76e.0: IO Pin 041 (P3-17): IOPort hm2/hm2_7i76e.0: IO Pin 042 (P3-05): IOPort hm2/hm2_7i76e.0: IO Pin 043 (P3-06): IOPort hm2/hm2_7i76e.0: IO Pin 044 (P3-07): IOPort hm2/hm2_7i76e.0: IO Pin 045 (P3-08): IOPort hm2/hm2_7i76e.0: IO Pin 046 (P3-09): IOPort hm2/hm2_7i76e.0: IO Pin 047 (P3-10): IOPort hm2/hm2_7i76e.0: IO Pin 048 (P3-11): IOPort hm2/hm2_7i76e.0: IO Pin 049 (P3-12): IOPort hm2/hm2_7i76e.0: IO Pin 050 (P3-13): IOPort hm2/hm2_7i76e.0: registered hm2_eth: ERROR: Failed to execute '/sbin/sysctl -q net.ipv6.conf.eth0:avahi.disable_ipv6=1' hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading vfdmod: close request received. vfdmod: application closed. Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime sysctl: cannot stat /proc/sys/net/ipv6/conf/eth0:avahi/disable_ipv6: No such file or directory Traceback (most recent call last): File "/home/cnc/.local/bin/qtpyvcp", line 11, in sys.exit(main()) File "/home/cnc/.local/lib/python2.7/site-packages/qtpyvcp/__init__.py", line 91, in main opts = parse_opts(__doc__) File "/home/cnc/.local/lib/python2.7/site-packages/qtpyvcp/utilities/opt_parser.py", line 164, in parse_opts result = VCPChooser(opts).exec_() File "/home/cnc/.local/lib/python2.7/site-packages/qtpyvcp/vcp_chooser/vcp_chooser.py", line 59, in __init__ child.setText(0, self.get_vcp_data(entry_point)) File "/home/cnc/.local/lib/python2.7/site-packages/qtpyvcp/vcp_chooser/vcp_chooser.py", line 78, in get_vcp_data vcp = entry_point.load() File "/usr/lib/python2.7/dist-packages/pkg_resources/__init__.py", line 2290, in load self.require(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/pkg_resources/__init__.py", line 2307, in require items = working_set.resolve(reqs, env, installer) File "/usr/lib/python2.7/dist-packages/pkg_resources/__init__.py", line 854, in resolve raise VersionConflict(dist, req).with_context(dependent_req) pkg_resources.VersionConflict: (qtpyvcp 0.3.6 (/home/cnc/.local/lib/python2.7/site-packages), Requirement.parse('qtpyvcp>=0.3.9')) 4258 4313 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Sat Jul 31 10:51:48 CDT 2021 UTC Date: Sat Jul 31 15:51:48 UTC 2021 this program: /usr/bin/linuxcnc_info uptime: 10:51:48 up 11:38, 1 user, load average: 0.20, 0.07, 0.01 lsb_release -sa: Debian Debian GNU/Linux 9.13 (stretch) 9.13 stretch which linuxcnc: /usr/bin/linuxcnc pwd: /home/cnc/linuxcnc/configs/Eldorado USER: cnc LOGNAME: cnc HOME: /home/cnc EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1920x1080 pixels (508x286 millimeters) PATH: /usr/bin:/home/cnc/linuxcnc/configs/Eldorado/bin:/usr/bin:/home/cnc/.local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: cnc kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Debian 4.9.272-2 (2021-07-19) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-4.9.0-16-rt-amd64 root=UUID=bcd941c1-90d1-4937-86dd-6d4dfb8d9c49 ro quiet model name: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz cores: 2 cpu MHz: 2925.975 parport: 0000-0000 : parport0 0000-0000 : parport0 serial: 0000-0000 : serial 0000-0000 : serial Versions: gcc: gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516 python: Python 2.7.13 git: git version 2.11.0 git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.8.2-20-gacab27a90 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /etc/init.d/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================-=====================-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 1:2.8.2.20.gacab27a90 all motion controller for CNC machines and robots (English documentation) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 1:2.8.2.20.gacab27a90 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.8.2.20.gacab27a90 amd64 PC based motion controller for real-time Linux