LINUXCNC - 2.10.0-pre0-1283-g399258c54
Machine configuration directory is '/home/salesman/linuxcnc/configs/cnc'
Machine configuration file is 'cnc.ini'
Starting LinuxCNC...
linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod
Note: Using POSIX realtime
Found file(REL): ./cnc.hal
hm2: loading Mesa HostMot2 driver version 0.15
hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2
hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:16:02:c0
hm2_eth: discovered 7I96
hm2/hm2_7i96.0: Low Level init 0.15
hm2/hm2_7i96.0: Smart Serial Firmware Version 43
hm2/hm2_7i96.0: 51 I/O Pins used:
hm2/hm2_7i96.0:     IO Pin 000 (TB3-01): IOPort
hm2/hm2_7i96.0:     IO Pin 001 (TB3-02): IOPort
hm2/hm2_7i96.0:     IO Pin 002 (TB3-03): IOPort
hm2/hm2_7i96.0:     IO Pin 003 (TB3-04): IOPort
hm2/hm2_7i96.0:     IO Pin 004 (TB3-05): IOPort
hm2/hm2_7i96.0:     IO Pin 005 (TB3-06): IOPort
hm2/hm2_7i96.0:     IO Pin 006 (TB3-07): IOPort
hm2/hm2_7i96.0:     IO Pin 007 (TB3-08): IOPort
hm2/hm2_7i96.0:     IO Pin 008 (TB3-09): IOPort
hm2/hm2_7i96.0:     IO Pin 009 (TB3-10): IOPort
hm2/hm2_7i96.0:     IO Pin 010 (TB3-11): IOPort
hm2/hm2_7i96.0:     IO Pin 011 (TB3-13/TB3-14): SSR #0, pin Out-00 (Output)
hm2/hm2_7i96.0:     IO Pin 012 (TB3-15/TB3-16): SSR #0, pin Out-01 (Output)
hm2/hm2_7i96.0:     IO Pin 013 (TB3-17/TB3-18): SSR #0, pin Out-02 (Output)
hm2/hm2_7i96.0:     IO Pin 014 (TB3-19/TB3-20): SSR #0, pin Out-03 (Output)
hm2/hm2_7i96.0:     IO Pin 015 (TB3-21/TB3-22): SSR #0, pin Out-04 (Output)
hm2/hm2_7i96.0:     IO Pin 016 (TB3-23/TB3-24): SSR #0, pin Out-05 (Output)
hm2/hm2_7i96.0:     IO Pin 017 (TB1-02/TB1-03): StepGen #0, pin Step (Output)
hm2/hm2_7i96.0:     IO Pin 018 (TB1-04/TB1-05): StepGen #0, pin Direction (Output)
hm2/hm2_7i96.0:     IO Pin 019 (TB1-08/TB1-09): StepGen #1, pin Step (Output)
hm2/hm2_7i96.0:     IO Pin 020 (TB1-10/TB1-11): StepGen #1, pin Direction (Output)
hm2/hm2_7i96.0:     IO Pin 021 (TB1-14/TB1-15): StepGen #2, pin Step (Output)
hm2/hm2_7i96.0:     IO Pin 022 (TB1-16/TB1-17): StepGen #2, pin Direction (Output)
hm2/hm2_7i96.0:     IO Pin 023 (TB1-20/TB1-21): IOPort
hm2/hm2_7i96.0:     IO Pin 024 (TB1-22-TB1-23): IOPort
hm2/hm2_7i96.0:     IO Pin 025 (TB2-02/TB2-03): PWMGen #0, pin Out0 (PWM or Up) (Output)
hm2/hm2_7i96.0:     IO Pin 026 (TB2-04/TB2-05): PWMGen #0, pin Out1 (Dir or Down) (Output)
hm2/hm2_7i96.0:     IO Pin 027 (TB2-07/TB2-08): IOPort
hm2/hm2_7i96.0:     IO Pin 028 (TB2-10/TB2-11): IOPort
hm2/hm2_7i96.0:     IO Pin 029 (TB2-13/TB2-14): IOPort
hm2/hm2_7i96.0:     IO Pin 030 (TB2-16/TB2-17): IOPort
hm2/hm2_7i96.0:     IO Pin 031 (TB2-18/TB2-19): IOPort
hm2/hm2_7i96.0:     IO Pin 032 (internal): IOPort
hm2/hm2_7i96.0:     IO Pin 033 (internal): SSR #0, pin AC Ref (internal) (Output)
hm2/hm2_7i96.0:     IO Pin 034 (P1-01/DB25-01): IOPort
hm2/hm2_7i96.0:     IO Pin 035 (P1-02/DB25-14): IOPort
hm2/hm2_7i96.0:     IO Pin 036 (P1-03/DB25-02): IOPort
hm2/hm2_7i96.0:     IO Pin 037 (P1-04/DB25-15): IOPort
hm2/hm2_7i96.0:     IO Pin 038 (P1-05/DB25-03): IOPort
hm2/hm2_7i96.0:     IO Pin 039 (P1-06/DB25-16): IOPort
hm2/hm2_7i96.0:     IO Pin 040 (P1-07/DB25-04): IOPort
hm2/hm2_7i96.0:     IO Pin 041 (P1-08/DB25-17): IOPort
hm2/hm2_7i96.0:     IO Pin 042 (P1-09/DB25-05): IOPort
hm2/hm2_7i96.0:     IO Pin 043 (P1-11/DB25-06): IOPort
hm2/hm2_7i96.0:     IO Pin 044 (P1-13/DB25-07): IOPort
hm2/hm2_7i96.0:     IO Pin 045 (P1-15/DB25-08): IOPort
hm2/hm2_7i96.0:     IO Pin 046 (P1-17/DB25-09): IOPort
hm2/hm2_7i96.0:     IO Pin 047 (P1-19/DB25-10): IOPort
hm2/hm2_7i96.0:     IO Pin 048 (P1-21/DB25-11): IOPort
hm2/hm2_7i96.0:     IO Pin 049 (P1-23/DB25-12): IOPort
hm2/hm2_7i96.0:     IO Pin 050 (P1-25/DB25-13): IOPort
hm2/hm2_7i96.0: registered
Found file(REL): ./custom.hal
Found file(REL): ./xhc-whb04b-6.hal
[QTvcp][CRITICAL]  Retry from Error Dialog
 Qtvcp encountered an error.  The following information may be useful in troubleshooting:
LinuxCNC Version  : 2.10.0-pre0-1283-g399258c54

Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/OpenGL/latebind.py", line 43, in __call__
    return self._finalCall( *args, **named )
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
TypeError: 'NoneType' object is not callable

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/qt5_graphics.py", line 760, in initializeGL
    self.realize()
  File "/usr/lib/python3/dist-packages/qt5_graphics.py", line 523, in realize
    self.font_base, width, linespace = glnav.use_pango_font(self._font, 0, 128)
                                       ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/lib/python3/dist-packages/glnav.py", line 65, in use_pango_font
    glBitmap(1, 0, 0, 0, 0, h-d, bytearray([0]*4))
  File "/usr/lib/python3/dist-packages/OpenGL/latebind.py", line 47, in __call__
    return self._finalCall( *args, **named )
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/lib/python3/dist-packages/OpenGL/wrapper.py", line 700, in wrapperCall
    raise err
  File "/usr/lib/python3/dist-packages/OpenGL/wrapper.py", line 693, in wrapperCall
    result = wrappedOperation( *cArguments )
             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/lib/python3/dist-packages/OpenGL/platform/baseplatform.py", line 415, in __call__
    return self( *args, **named )
           ^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/lib/python3/dist-packages/OpenGL/error.py", line 230, in glCheckError
    raise self._errorClass(
OpenGL.error.GLError: GLError(
        err = 1285,
        description = b'out of memory',
        baseOperation = glBitmap,
        pyArgs = (
                1,
                0,
                0,
                0,
                0,
                23.0,
                <OpenGL.arrays._buffers.Py_buffer object at 0x7fcad23e68d0>,
        ),
        cArgs = (
                1,
                0,
                0,
                0,
                0,
                23.0,
                <OpenGL.arrays._buffers.Py_buffer object at 0x7fcad23e68d0>,
        ),
        cArguments = (
                1,
                0,
                0,
                0,
                0,
                23.0,
                <OpenGL.arrays._buffers.Py_buffer object at 0x7fcad23e68d0>,
        )
)

 (qtvcp:478)
qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 1294, resource id: 14680197, major code: 40 (TranslateCoords), minor code: 0
QBackingStore::endPaint() called with active painter; did you forget to destroy it or call QPainter::end() on it?
QWidget::repaint: Recursive repaint detected
/usr/bin/linuxcnc: line 977:  3743 Segmentation fault      (core dumped) $EMCDISPLAY -ini "$INIFILE" $EMCDISPLAYARGS $EXTRA_ARGS
Shutting down and cleaning up LinuxCNC...
Running HAL shutdown script
task: 3438 cycles, min=0.000008, max=0.021272, avg=0.009989, 0 latency excursions (> 10x expected cycle time of 0.010000s)
A non blocked signal was caught
hm2_eth: in hm2_eth_reset
hm2_eth: HostMot2 ethernet driver unloaded
hm2: unloading
Note: Using POSIX realtime
LinuxCNC terminated with an error.  You can find more information in the log:
    /home/salesman/linuxcnc_debug.txt
and
    /home/salesman/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal