mill@mill:~$ linuxcnc LINUXCNC - 2.10.0~pre0 Machine configuration directory is '/home/mill/linuxcnc/configs/sim.qtdragon_hd.qtdragon_hd_xyz' Machine configuration file is 'qtdragon_hd_xyza.ini' Starting LinuxCNC... linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Note: Using POSIX realtime Found file(lib): /usr/share/linuxcnc/hallib/gantrysim.hal Loaded HAL Components: ID Type Name PID State 26 RT trivkins ready 25 User halcmd5670 5670 ready 21 RT homemod ready 16 RT tpmod ready 10 User halui 5658 ready 4 User iocontrol 5656 ready Found file(lib): /usr/share/linuxcnc/hallib/simulated-gantry-home.hal link (updating variable file): No such file or directory [QTvcp.QTVCP.LIB.QT_PDF.PDFVIEWER][WARNING] PDFViwer - Is python3-poppler-qt5 installed? (PDFViewer.py:15) [QTvcp.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_POWER Entry in DISPLAY, Using: 1500 (qt_istat.py:477) preference file does not exist -makeing file - /home/mill/linuxcnc/configs/sim.qtdragon_hd.qtdragon_hd_xyz/qtdragon_hd.pref No section: 'DIALOG_GEOMETRY' Adding section DIALOG_GEOMETRY No section: 'DIALOG_OPTIONS' Adding section DIALOG_OPTIONS No option 'EntryDialog_sound_type' in section: 'DIALOG_OPTIONS' No option 'ToolChangeDialog-geometry' in section: 'DIALOG_GEOMETRY' No option 'toolDialog_play_sound' in section: 'DIALOG_OPTIONS' No option 'toolDialog_speak' in section: 'DIALOG_OPTIONS' No option 'toolDialog_sound_type' in section: 'DIALOG_OPTIONS' No option 'fileDialog_play_sound' in section: 'DIALOG_OPTIONS' No option 'fileDialog_sound_type' in section: 'DIALOG_OPTIONS' No section: 'BOOK_KEEPING' Adding section BOOK_KEEPING No section: 'ORIGINOFFSET_SYSTEM_NAMES' Adding section ORIGINOFFSET_SYSTEM_NAMES No option '__dialogOffsetViewWidget-G55' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option '__dialogOffsetViewWidget-G56' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option '__dialogOffsetViewWidget-G57' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option '__dialogOffsetViewWidget-G58' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option '__dialogOffsetViewWidget-G59' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option '__dialogOffsetViewWidget-G59.1' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option '__dialogOffsetViewWidget-G59.2' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option '__dialogOffsetViewWidget-G59.3' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option 'CalculatorDialog_play_sound' in section: 'DIALOG_OPTIONS' No option 'CalculatorDialog_sound_type' in section: 'DIALOG_OPTIONS' No option 'MachineLogDialog_play_sound' in section: 'DIALOG_OPTIONS' No option 'MachineLogDialog_sound_type' in section: 'DIALOG_OPTIONS' No option 'RunFromLineDialog_play_sound' in section: 'DIALOG_OPTIONS' No option 'RunFromLineDialog_sound_type' in section: 'DIALOG_OPTIONS' No section: 'SCREEN_OPTIONS' Adding section SCREEN_OPTIONS No option 'desktop_notify' in section: 'SCREEN_OPTIONS' No option 'notify_max_msgs' in section: 'SCREEN_OPTIONS' No option 'shutdown_check' in section: 'SCREEN_OPTIONS' No option 'sound_player_on' in section: 'SCREEN_OPTIONS' No section: 'MCH_MSG_OPTIONS' Adding section MCH_MSG_OPTIONS No option 'mchnMsg_speak_errors' in section: 'MCH_MSG_OPTIONS' No option 'mchnMsg_speak_text' in section: 'MCH_MSG_OPTIONS' No option 'mchnMsg_sound_type' in section: 'MCH_MSG_OPTIONS' No section: 'USR_MSG_OPTIONS' Adding section USR_MSG_OPTIONS No option 'userMsg_sound_type' in section: 'USR_MSG_OPTIONS' No option 'userMsg_use_focusOverlay' in section: 'USR_MSG_OPTIONS' No section: 'SHUTDOWN_OPTIONS' Adding section SHUTDOWN_OPTIONS No option 'shutdown_alert_sound_type' in section: 'SHUTDOWN_OPTIONS' No option 'shutdown_exit_sound_type' in section: 'SHUTDOWN_OPTIONS' No option 'shutdown_msg_title' in section: 'SHUTDOWN_OPTIONS' No option 'shutdown_msg_focus_text' in section: 'SHUTDOWN_OPTIONS' No option 'shutdown_msg_detail' in section: 'SHUTDOWN_OPTIONS' No section: 'NOTIFY_OPTIONS' Adding section NOTIFY_OPTIONS No option 'notify_start_title' in section: 'NOTIFY_OPTIONS' No option 'notify_start_detail' in section: 'NOTIFY_OPTIONS' No option 'notify_start_timeout' in section: 'NOTIFY_OPTIONS' No option 'offset_table-G54' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option 'offset_table-G55' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option 'offset_table-G56' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option 'offset_table-G57' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option 'offset_table-G58' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option 'offset_table-G59' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option 'offset_table-G59.1' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option 'offset_table-G59.2' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No option 'offset_table-G59.3' in section: 'ORIGINOFFSET_SYSTEM_NAMES' No section: 'SCREEN_CONTROL_LAST_SETTING' Adding section SCREEN_CONTROL_LAST_SETTING No option 'gcodegraphics-user-zoom' in section: 'SCREEN_CONTROL_LAST_SETTING' No option 'gcodegraphics-user-panx' in section: 'SCREEN_CONTROL_LAST_SETTING' No option 'gcodegraphics-user-pany' in section: 'SCREEN_CONTROL_LAST_SETTING' No option 'gcodegraphics-user-lat' in section: 'SCREEN_CONTROL_LAST_SETTING' No option 'gcodegraphics-user-lon' in section: 'SCREEN_CONTROL_LAST_SETTING' No option 'last_loaded_file' in section: 'BOOK_KEEPING' No section: 'CUSTOM_FORM_ENTRIES' Adding section CUSTOM_FORM_ENTRIES No option 'Laser X' in section: 'CUSTOM_FORM_ENTRIES' No option 'Laser Y' in section: 'CUSTOM_FORM_ENTRIES' No option 'Sensor X' in section: 'CUSTOM_FORM_ENTRIES' No option 'Sensor Y' in section: 'CUSTOM_FORM_ENTRIES' No option 'Camera X' in section: 'CUSTOM_FORM_ENTRIES' No option 'Camera Y' in section: 'CUSTOM_FORM_ENTRIES' No option 'Work Height' in section: 'CUSTOM_FORM_ENTRIES' No option 'Touch Height' in section: 'CUSTOM_FORM_ENTRIES' No option 'Sensor Height' in section: 'CUSTOM_FORM_ENTRIES' No option 'Search Velocity' in section: 'CUSTOM_FORM_ENTRIES' No option 'Probe Velocity' in section: 'CUSTOM_FORM_ENTRIES' No option 'Max Probe' in section: 'CUSTOM_FORM_ENTRIES' No option 'Retract Distance' in section: 'CUSTOM_FORM_ENTRIES' No option 'Z Safe Travel' in section: 'CUSTOM_FORM_ENTRIES' No option 'Eoffset count' in section: 'CUSTOM_FORM_ENTRIES' No option 'External offsets' in section: 'CUSTOM_FORM_ENTRIES' No option 'Reload program' in section: 'CUSTOM_FORM_ENTRIES' No option 'Reload tool' in section: 'CUSTOM_FORM_ENTRIES' No option 'Use keyboard' in section: 'CUSTOM_FORM_ENTRIES' No option 'Use tool sensor' in section: 'CUSTOM_FORM_ENTRIES' No option 'Use tool touchplate' in section: 'CUSTOM_FORM_ENTRIES' No option 'Run from line' in section: 'CUSTOM_FORM_ENTRIES' No option 'Use virtual keyboard' in section: 'CUSTOM_FORM_ENTRIES' No option 'Use camera' in section: 'CUSTOM_FORM_ENTRIES' No option 'Use alpha display mode' in section: 'CUSTOM_FORM_ENTRIES' No option 'Inhibit display mouse selection' in section: 'CUSTOM_FORM_ENTRIES' No section: 'PROBE OPTIONS' Adding section PROBE OPTIONS No option 'Probe diameter' in section: 'PROBE OPTIONS' No option 'Probe rapid' in section: 'PROBE OPTIONS' No option 'Probe feed' in section: 'PROBE OPTIONS' No option 'Probe search' in section: 'PROBE OPTIONS' No option 'Probe max travel' in section: 'PROBE OPTIONS' No option 'Probe max z' in section: 'PROBE OPTIONS' No option 'Probe extra depth' in section: 'PROBE OPTIONS' No option 'Probe step off' in section: 'PROBE OPTIONS' No option 'Probe xy clearance' in section: 'PROBE OPTIONS' No option 'Probe z clearance' in section: 'PROBE OPTIONS' No option 'Probe edge width' in section: 'PROBE OPTIONS' No option 'Calibration offset' in section: 'PROBE OPTIONS' No option 'Cal x width' in section: 'PROBE OPTIONS' No option 'Cal y width' in section: 'PROBE OPTIONS' No option 'Cal diameter' in section: 'PROBE OPTIONS' [QTvcp.QTVCP.LIB.QT_NGCGUI.NGCGUI][DEBUG] UI Filename: /usr/lib/python3/dist-packages/qtvcp/lib/qt_ngcgui/ngcgui.ui (ngcgui.py:458) [QTvcp.QTVCP.LIB.QT_NGCGUI.NGCGUI][DEBUG] UI Filename: /usr/lib/python3/dist-packages/qtvcp/lib/qt_ngcgui/ngcgui.ui Didn't find a path NGCGUI files (ngcgui.py:485) No option 'style_QSS_Path' in section: 'BOOK_KEEPING' No option 'mainwindow_geometry' in section: 'SCREEN_OPTIONS' Shutting down and cleaning up LinuxCNC... task: 4917 cycles, min=0.000011, max=0.092167, avg=0.010006, 0 latency excursions (> 10x expected cycle time of 0.010000s) Note: Using POSIX realtime mill@mill:~$