[ 0.197958] pci 0000:00:03.1: bridge window [mem 0xfca00000-0xfcbfffff] [ 0.197961] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.197997] pci 0000:0a:00.0: [1022:1471] type 01 class 0x060400 [ 0.198074] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold [ 0.198142] pci 0000:09:00.0: PCI bridge to [bus 0a-0b] [ 0.198146] pci 0000:09:00.0: bridge window [io 0xe000-0xefff] [ 0.198148] pci 0000:09:00.0: bridge window [mem 0xfca00000-0xfcafffff] [ 0.198151] pci 0000:09:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.198184] pci 0000:0b:00.0: [1002:687f] type 00 class 0x030000 [ 0.198207] pci 0000:0b:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.198216] pci 0000:0b:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.198222] pci 0000:0b:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 0.198228] pci 0000:0b:00.0: reg 0x24: [mem 0xfca00000-0xfca7ffff] [ 0.198234] pci 0000:0b:00.0: reg 0x30: [mem 0xfca80000-0xfca9ffff pref] [ 0.198245] pci 0000:0b:00.0: BAR 0: assigned to efifb [ 0.198289] pci 0000:0b:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.198357] pci 0000:0b:00.1: [1002:aaf8] type 00 class 0x040300 [ 0.198372] pci 0000:0b:00.1: reg 0x10: [mem 0xfcaa0000-0xfcaa3fff] [ 0.198446] pci 0000:0b:00.1: PME# supported from D1 D2 D3hot D3cold [ 0.198524] pci 0000:0a:00.0: PCI bridge to [bus 0b] [ 0.198528] pci 0000:0a:00.0: bridge window [io 0xe000-0xefff] [ 0.198530] pci 0000:0a:00.0: bridge window [mem 0xfca00000-0xfcafffff] [ 0.198533] pci 0000:0a:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.198694] pci 0000:0c:00.0: [1022:145a] type 00 class 0x130000 [ 0.198719] pci 0000:0c:00.0: enabling Extended Tags [ 0.198779] pci 0000:0c:00.2: [1022:1456] type 00 class 0x108000 [ 0.198792] pci 0000:0c:00.2: reg 0x18: [mem 0xfc800000-0xfc8fffff] [ 0.198799] pci 0000:0c:00.2: reg 0x24: [mem 0xfc900000-0xfc901fff] [ 0.198805] pci 0000:0c:00.2: enabling Extended Tags [ 0.198869] pci 0000:0c:00.3: [1022:145f] type 00 class 0x0c0330 [ 0.198880] pci 0000:0c:00.3: reg 0x10: [mem 0xfc700000-0xfc7fffff 64bit] [ 0.198898] pci 0000:0c:00.3: enabling Extended Tags [ 0.198925] pci 0000:0c:00.3: PME# supported from D0 D3hot D3cold [ 0.198977] pci 0000:00:07.1: PCI bridge to [bus 0c] [ 0.198980] pci 0000:00:07.1: bridge window [mem 0xfc700000-0xfc9fffff] [ 0.199719] pci 0000:0d:00.0: [1022:1455] type 00 class 0x130000 [ 0.199745] pci 0000:0d:00.0: enabling Extended Tags [ 0.199810] pci 0000:0d:00.2: [1022:7901] type 00 class 0x010601 [ 0.199836] pci 0000:0d:00.2: reg 0x24: [mem 0xfce08000-0xfce08fff] [ 0.199843] pci 0000:0d:00.2: enabling Extended Tags [ 0.199869] pci 0000:0d:00.2: PME# supported from D3hot D3cold [ 0.199915] pci 0000:0d:00.3: [1022:1457] type 00 class 0x040300 [ 0.199924] pci 0000:0d:00.3: reg 0x10: [mem 0xfce00000-0xfce07fff] [ 0.199942] pci 0000:0d:00.3: enabling Extended Tags [ 0.199967] pci 0000:0d:00.3: PME# supported from D0 D3hot D3cold [ 0.200028] pci 0000:00:08.1: PCI bridge to [bus 0d] [ 0.200032] pci 0000:00:08.1: bridge window [mem 0xfce00000-0xfcefffff] [ 0.200291] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0 [ 0.200331] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0 [ 0.200364] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0 [ 0.200407] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0 [ 0.200445] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0 [ 0.200476] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0 [ 0.200507] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.200538] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.200902] pci 0000:0b:00.0: vgaarb: setting as boot VGA device [ 0.200902] pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.200902] pci 0000:0b:00.0: vgaarb: bridge control possible [ 0.200902] vgaarb: loaded [ 0.200902] pps_core: LinuxPPS API ver. 1 registered [ 0.200902] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.200902] PTP clock support registered [ 0.200902] EDAC MC: Ver: 3.0.0 [ 0.200902] Registered efivars operations [ 0.200902] PCI: Using ACPI for IRQ routing [ 0.202408] PCI: pci_cache_line_size set to 64 bytes [ 0.202408] e820: reserve RAM buffer [mem 0x09e10000-0x0bffffff] [ 0.202408] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff] [ 0.202408] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff] [ 0.202408] e820: reserve RAM buffer [mem 0xd126a000-0xd3ffffff] [ 0.202408] e820: reserve RAM buffer [mem 0xda0f3000-0xdbffffff] [ 0.202408] e820: reserve RAM buffer [mem 0xda370000-0xdbffffff] [ 0.202408] e820: reserve RAM buffer [mem 0xde000000-0xdfffffff] [ 0.202408] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff] [ 0.204045] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.204047] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.206099] clocksource: Switched to clocksource tsc-early [ 0.213457] VFS: Disk quotas dquot_6.6.0 [ 0.213476] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.213606] AppArmor: AppArmor Filesystem Enabled [ 0.213620] pnp: PnP ACPI init [ 0.213729] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.213732] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.213791] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.213905] system 00:02: [io 0x0300-0x030f] has been reserved [ 0.213906] system 00:02: [io 0x0230-0x023f] has been reserved [ 0.213907] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.213909] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.214097] pnp 00:03: [dma 0 disabled] [ 0.214122] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.214266] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.214267] system 00:04: [io 0x040b] has been reserved [ 0.214268] system 00:04: [io 0x04d6] has been reserved [ 0.214268] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.214269] system 00:04: [io 0x0c14] has been reserved [ 0.214270] system 00:04: [io 0x0c50-0x0c51] has been reserved [ 0.214271] system 00:04: [io 0x0c52] has been reserved [ 0.214272] system 00:04: [io 0x0c6c] has been reserved [ 0.214273] system 00:04: [io 0x0c6f] has been reserved [ 0.214273] system 00:04: [io 0x0cd0-0x0cd1] has been reserved [ 0.214274] system 00:04: [io 0x0cd2-0x0cd3] has been reserved [ 0.214275] system 00:04: [io 0x0cd4-0x0cd5] has been reserved [ 0.214276] system 00:04: [io 0x0cd6-0x0cd7] has been reserved [ 0.214277] system 00:04: [io 0x0cd8-0x0cdf] has been reserved [ 0.214277] system 00:04: [io 0x0800-0x089f] has been reserved [ 0.214278] system 00:04: [io 0x0b00-0x0b0f] has been reserved [ 0.214279] system 00:04: [io 0x0b20-0x0b3f] has been reserved [ 0.214280] system 00:04: [io 0x0900-0x090f] has been reserved [ 0.214281] system 00:04: [io 0x0910-0x091f] has been reserved [ 0.214282] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.214283] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved [ 0.214284] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved [ 0.214285] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.214286] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved [ 0.214287] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.214288] system 00:04: [mem 0xff000000-0xffffffff] has been reserved [ 0.214290] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.214578] pnp: PnP ACPI: found 5 devices [ 0.220397] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.220410] pci 0000:00:01.1: PCI bridge to [bus 01] [ 0.220412] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff] [ 0.220417] pci 0000:03:00.0: PCI bridge to [bus 04] [ 0.220425] pci 0000:03:04.0: PCI bridge to [bus 05] [ 0.220434] pci 0000:03:05.0: PCI bridge to [bus 06] [ 0.220443] pci 0000:03:06.0: PCI bridge to [bus 07] [ 0.220451] pci 0000:03:07.0: PCI bridge to [bus 08] [ 0.220453] pci 0000:03:07.0: bridge window [io 0xf000-0xffff] [ 0.220456] pci 0000:03:07.0: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.220462] pci 0000:02:00.2: PCI bridge to [bus 03-08] [ 0.220464] pci 0000:02:00.2: bridge window [io 0xf000-0xffff] [ 0.220467] pci 0000:02:00.2: bridge window [mem 0xfcc00000-0xfccfffff] [ 0.220472] pci 0000:00:01.3: PCI bridge to [bus 02-08] [ 0.220474] pci 0000:00:01.3: bridge window [io 0xf000-0xffff] [ 0.220475] pci 0000:00:01.3: bridge window [mem 0xfcc00000-0xfcdfffff] [ 0.220479] pci 0000:0a:00.0: PCI bridge to [bus 0b] [ 0.220481] pci 0000:0a:00.0: bridge window [io 0xe000-0xefff] [ 0.220483] pci 0000:0a:00.0: bridge window [mem 0xfca00000-0xfcafffff] [ 0.220485] pci 0000:0a:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.220489] pci 0000:09:00.0: PCI bridge to [bus 0a-0b] [ 0.220490] pci 0000:09:00.0: bridge window [io 0xe000-0xefff] [ 0.220493] pci 0000:09:00.0: bridge window [mem 0xfca00000-0xfcafffff] [ 0.220495] pci 0000:09:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.220499] pci 0000:00:03.1: PCI bridge to [bus 09-0b] [ 0.220500] pci 0000:00:03.1: bridge window [io 0xe000-0xefff] [ 0.220502] pci 0000:00:03.1: bridge window [mem 0xfca00000-0xfcbfffff] [ 0.220503] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.220506] pci 0000:00:07.1: PCI bridge to [bus 0c] [ 0.220508] pci 0000:00:07.1: bridge window [mem 0xfc700000-0xfc9fffff] [ 0.220511] pci 0000:00:08.1: PCI bridge to [bus 0d] [ 0.220513] pci 0000:00:08.1: bridge window [mem 0xfce00000-0xfcefffff] [ 0.220517] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.220518] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.220519] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.220519] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.220520] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.220521] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.220522] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window] [ 0.220522] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window] [ 0.220523] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff] [ 0.220524] pci_bus 0000:02: resource 0 [io 0xf000-0xffff] [ 0.220525] pci_bus 0000:02: resource 1 [mem 0xfcc00000-0xfcdfffff] [ 0.220525] pci_bus 0000:03: resource 0 [io 0xf000-0xffff] [ 0.220526] pci_bus 0000:03: resource 1 [mem 0xfcc00000-0xfccfffff] [ 0.220527] pci_bus 0000:08: resource 0 [io 0xf000-0xffff] [ 0.220527] pci_bus 0000:08: resource 1 [mem 0xfcc00000-0xfccfffff] [ 0.220528] pci_bus 0000:09: resource 0 [io 0xe000-0xefff] [ 0.220529] pci_bus 0000:09: resource 1 [mem 0xfca00000-0xfcbfffff] [ 0.220529] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.220530] pci_bus 0000:0a: resource 0 [io 0xe000-0xefff] [ 0.220531] pci_bus 0000:0a: resource 1 [mem 0xfca00000-0xfcafffff] [ 0.220531] pci_bus 0000:0a: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.220532] pci_bus 0000:0b: resource 0 [io 0xe000-0xefff] [ 0.220533] pci_bus 0000:0b: resource 1 [mem 0xfca00000-0xfcafffff] [ 0.220533] pci_bus 0000:0b: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref] [ 0.220534] pci_bus 0000:0c: resource 1 [mem 0xfc700000-0xfc9fffff] [ 0.220535] pci_bus 0000:0d: resource 1 [mem 0xfce00000-0xfcefffff] [ 0.220591] NET: Registered protocol family 2 [ 0.220806] tcp_listen_portaddr_hash hash table entries: 8192 (order: 7, 524288 bytes) [ 0.220897] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.221143] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 0.221601] TCP: Hash tables configured (established 131072 bind 65536) [ 0.221693] UDP hash table entries: 8192 (order: 8, 1048576 bytes) [ 0.221845] UDP-Lite hash table entries: 8192 (order: 8, 1048576 bytes) [ 0.222040] NET: Registered protocol family 1 [ 0.222044] NET: Registered protocol family 44 [ 0.222200] pci 0000:0b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.222208] pci 0000:0b:00.1: Linked as a consumer to 0000:0b:00.0 [ 0.222209] pci 0000:0b:00.1: D0 power state depends on 0000:0b:00.0 [ 0.222351] PCI: CLS 64 bytes, default 64 [ 0.222384] Unpacking initramfs... [ 0.834503] Freeing initrd memory: 61180K [ 0.834524] AMD-Vi: IOMMU performance counters supported [ 0.835012] iommu: Adding device 0000:00:01.0 to group 0 [ 0.835229] iommu: Adding device 0000:00:01.1 to group 1 [ 0.835412] iommu: Adding device 0000:00:01.3 to group 2 [ 0.835618] iommu: Adding device 0000:00:02.0 to group 3 [ 0.835801] iommu: Adding device 0000:00:03.0 to group 4 [ 0.836005] iommu: Adding device 0000:00:03.1 to group 5 [ 0.836192] iommu: Adding device 0000:00:04.0 to group 6 [ 0.836408] iommu: Adding device 0000:00:07.0 to group 7 [ 0.836584] iommu: Adding device 0000:00:07.1 to group 8 [ 0.836791] iommu: Adding device 0000:00:08.0 to group 9 [ 0.836966] iommu: Adding device 0000:00:08.1 to group 10 [ 0.837178] iommu: Adding device 0000:00:14.0 to group 11 [ 0.837196] iommu: Adding device 0000:00:14.3 to group 11 [ 0.837407] iommu: Adding device 0000:00:18.0 to group 12 [ 0.837424] iommu: Adding device 0000:00:18.1 to group 12 [ 0.837440] iommu: Adding device 0000:00:18.2 to group 12 [ 0.837458] iommu: Adding device 0000:00:18.3 to group 12 [ 0.837473] iommu: Adding device 0000:00:18.4 to group 12 [ 0.837489] iommu: Adding device 0000:00:18.5 to group 12 [ 0.837504] iommu: Adding device 0000:00:18.6 to group 12 [ 0.837521] iommu: Adding device 0000:00:18.7 to group 12 [ 0.837726] iommu: Adding device 0000:01:00.0 to group 13 [ 0.837923] iommu: Adding device 0000:02:00.0 to group 14 [ 0.837947] iommu: Adding device 0000:02:00.1 to group 14 [ 0.837972] iommu: Adding device 0000:02:00.2 to group 14 [ 0.837984] iommu: Adding device 0000:03:00.0 to group 14 [ 0.837996] iommu: Adding device 0000:03:04.0 to group 14 [ 0.838007] iommu: Adding device 0000:03:05.0 to group 14 [ 0.838019] iommu: Adding device 0000:03:06.0 to group 14 [ 0.838033] iommu: Adding device 0000:03:07.0 to group 14 [ 0.838052] iommu: Adding device 0000:08:00.0 to group 14 [ 0.838249] iommu: Adding device 0000:09:00.0 to group 15 [ 0.838448] iommu: Adding device 0000:0a:00.0 to group 16 [ 0.838682] iommu: Adding device 0000:0b:00.0 to group 17 [ 0.838750] iommu: Using direct mapping for device 0000:0b:00.0 [ 0.838836] iommu: Adding device 0000:0b:00.1 to group 18 [ 0.839002] iommu: Adding device 0000:0c:00.0 to group 19 [ 0.839184] iommu: Adding device 0000:0c:00.2 to group 20 [ 0.839393] iommu: Adding device 0000:0c:00.3 to group 21 [ 0.839575] iommu: Adding device 0000:0d:00.0 to group 22 [ 0.839778] iommu: Adding device 0000:0d:00.2 to group 23 [ 0.839958] iommu: Adding device 0000:0d:00.3 to group 24 [ 0.840240] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 0.840241] AMD-Vi: Extended features (0xf77ef22294ada): [ 0.840242] PPR NX GT IA GA PC GA_vAPIC [ 0.840244] AMD-Vi: Interrupt remapping enabled [ 0.840244] AMD-Vi: virtual APIC enabled [ 0.840381] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.842531] amd_uncore: AMD NB counters detected [ 0.842540] amd_uncore: AMD LLC counters detected [ 0.842797] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 0.843479] Initialise system trusted keyrings [ 0.843494] Key type blacklist registered [ 0.843539] workingset: timestamp_bits=40 max_order=22 bucket_order=0 [ 0.844532] zbud: loaded [ 0.930956] Key type asymmetric registered [ 0.930957] Asymmetric key parser 'x509' registered [ 0.930965] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.930993] io scheduler noop registered [ 0.930993] io scheduler deadline registered [ 0.931013] io scheduler cfq registered (default) [ 0.931014] io scheduler mq-deadline registered [ 0.931971] pcieport 0000:00:01.1: AER enabled with IRQ 26 [ 0.933003] pcieport 0000:00:01.3: AER enabled with IRQ 27 [ 0.933900] pcieport 0000:00:03.1: AER enabled with IRQ 28 [ 0.934842] pcieport 0000:00:07.1: AER enabled with IRQ 29 [ 0.936948] pcieport 0000:00:08.1: AER enabled with IRQ 31 [ 0.938574] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.938584] efifb: probing for efifb [ 0.938591] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ 0.938592] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.938592] efifb: scrolling: redraw [ 0.938593] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.939727] Console: switching to colour frame buffer device 128x48 [ 0.940812] fb0: EFI VGA frame buffer device [ 0.940834] Monitor-Mwait will be used to enter C-1 state [ 0.942164] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.963051] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.963363] Linux agpgart interface v0.103 [ 0.963628] AMD IOMMUv2 driver by Joerg Roedel [ 0.964666] i8042: PNP: No PS/2 controller found. [ 0.964710] mousedev: PS/2 mouse device common for all mice [ 0.964744] rtc_cmos 00:01: RTC can wake from S4 [ 0.965011] rtc_cmos 00:01: registered as rtc0 [ 0.965022] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.965295] NET: Registered protocol family 10 [ 0.969582] Segment Routing with IPv6 [ 0.969595] mip6: Mobile IPv6 [ 0.969596] NET: Registered protocol family 17 [ 0.969622] mpls_gso: MPLS GSO support [ 0.970391] mce: Using 23 MCE banks [ 0.970415] microcode: CPU0: patch_level=0x0800820d [ 0.970421] microcode: CPU1: patch_level=0x0800820d [ 0.970426] microcode: CPU2: patch_level=0x0800820d [ 0.970431] microcode: CPU3: patch_level=0x0800820d [ 0.970438] microcode: CPU4: patch_level=0x0800820d [ 0.970445] microcode: CPU5: patch_level=0x0800820d [ 0.970451] microcode: CPU6: patch_level=0x0800820d [ 0.970457] microcode: CPU7: patch_level=0x0800820d [ 0.970463] microcode: CPU8: patch_level=0x0800820d [ 0.970467] microcode: CPU9: patch_level=0x0800820d [ 0.970472] microcode: CPU10: patch_level=0x0800820d [ 0.970477] microcode: CPU11: patch_level=0x0800820d [ 0.970482] microcode: CPU12: patch_level=0x0800820d [ 0.970487] microcode: CPU13: patch_level=0x0800820d [ 0.970493] microcode: CPU14: patch_level=0x0800820d [ 0.970499] microcode: CPU15: patch_level=0x0800820d [ 0.970530] microcode: Microcode Update Driver: v2.2. [ 0.970538] sched_clock: Marking stable (1002519400, -31992705)->(977257968, -6731273) [ 0.970942] registered taskstats version 1 [ 0.970949] Loading compiled-in X.509 certificates [ 0.990794] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 0.990812] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 0.990845] zswap: loaded using pool lzo/zbud [ 0.991188] AppArmor: AppArmor sha1 policy hashing enabled [ 0.991660] rtc_cmos 00:01: setting system clock to 2021-03-01 09:39:48 UTC (1614591588) [ 1.192117] Freeing unused kernel image memory: 1548K [ 1.192119] Write protecting the kernel read-only data: 16384k [ 1.193939] Freeing unused kernel image memory: 2032K [ 1.194110] Freeing unused kernel image memory: 764K [ 1.199527] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.199528] Run /init as init process [ 1.249883] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.250029] ACPI: Power Button [PWRB] [ 1.250853] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.268031] ACPI: Power Button [PWRF] [ 1.269650] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.269652] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 1.270523] r8168: loading out-of-tree module taints kernel. [ 1.270726] r8168: module verification failed: signature and/or required key missing - tainting kernel [ 1.273872] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 1.274292] r8168 Gigabit Ethernet driver 8.046.00-NAPI loaded [ 1.274675] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 1.274742] SCSI subsystem initialized [ 1.282687] ACPI: bus type USB registered [ 1.282705] nvme nvme0: pci function 0000:01:00.0 [ 1.283099] usbcore: registered new interface driver usbfs [ 1.283318] usbcore: registered new interface driver hub [ 1.283481] usbcore: registered new device driver usb [ 1.286270] cryptd: max_cpu_qlen set to 1000 [ 1.288099] libata version 3.00 loaded. [ 1.291499] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 1.291509] r8168 Copyright (C) 2018 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 1.301830] AVX2 version of gcm_enc/dec engaged. [ 1.301832] AES CTR mode by8 optimization enabled [ 1.307795] r8168 0000:08:00.0 enp8s0: renamed from eth0 [ 1.307869] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.307887] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 1.309004] ahci 0000:02:00.1: version 3.0 [ 1.309167] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled [ 1.309204] ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode [ 1.309206] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst [ 1.310060] scsi host0: ahci [ 1.310262] scsi host1: ahci [ 1.310387] scsi host2: ahci [ 1.310503] scsi host3: ahci [ 1.310612] scsi host4: ahci [ 1.310729] scsi host5: ahci [ 1.310843] scsi host6: ahci [ 1.310949] scsi host7: ahci [ 1.311016] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 47 [ 1.311018] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 47 [ 1.311019] ata3: DUMMY [ 1.311020] ata4: DUMMY [ 1.311022] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 47 [ 1.311023] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 47 [ 1.311024] ata7: DUMMY [ 1.311024] ata8: DUMMY [ 1.311194] ahci 0000:0d:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode [ 1.311196] ahci 0000:0d:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part [ 1.311396] scsi host8: ahci [ 1.311459] ata9: SATA max UDMA/133 abar m4096@0xfce08000 port 0xfce08100 irq 49 [ 1.363202] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410 [ 1.363721] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.363722] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.363723] usb usb1: Product: xHCI Host Controller [ 1.363724] usb usb1: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.363724] usb usb1: SerialNumber: 0000:02:00.0 [ 1.363828] hub 1-0:1.0: USB hub found [ 1.363840] hub 1-0:1.0: 10 ports detected [ 1.369911] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 1.369914] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 1.369916] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 1.369965] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.369980] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.369981] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.369982] usb usb2: Product: xHCI Host Controller [ 1.369983] usb usb2: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.369984] usb usb2: SerialNumber: 0000:02:00.0 [ 1.370054] hub 2-0:1.0: USB hub found [ 1.370061] hub 2-0:1.0: 4 ports detected [ 1.372569] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 1.372572] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 3 [ 1.372668] xhci_hcd 0000:0c:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410 [ 1.373124] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 1.373125] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.373126] usb usb3: Product: xHCI Host Controller [ 1.373126] usb usb3: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.373127] usb usb3: SerialNumber: 0000:0c:00.3 [ 1.373202] hub 3-0:1.0: USB hub found [ 1.373207] hub 3-0:1.0: 4 ports detected [ 1.373370] xhci_hcd 0000:0c:00.3: xHCI Host Controller [ 1.373372] xhci_hcd 0000:0c:00.3: new USB bus registered, assigned bus number 4 [ 1.373374] xhci_hcd 0000:0c:00.3: Host supports USB 3.0 SuperSpeed [ 1.373384] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.373402] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 1.373403] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.373403] usb usb4: Product: xHCI Host Controller [ 1.373404] usb usb4: Manufacturer: Linux 4.19.0-14-rt-amd64 xhci-hcd [ 1.373405] usb usb4: SerialNumber: 0000:0c:00.3 [ 1.373476] hub 4-0:1.0: USB hub found [ 1.373482] hub 4-0:1.0: 4 ports detected [ 1.403856] [drm] amdgpu kernel modesetting enabled. [ 1.410554] Parsing CRAT table with 1 nodes [ 1.410557] Ignoring ACPI CRAT on non-APU system [ 1.410559] Virtual CRAT table created for CPU [ 1.410560] Parsing CRAT table with 1 nodes [ 1.410561] Creating topology SYSFS entries [ 1.410567] Topology: Add CPU node [ 1.410568] Finished initializing topology [ 1.410598] kfd kfd: Initialized module [ 1.410755] checking generic (e0000000 300000) vs hw (e0000000 10000000) [ 1.410756] fb: switching to amdgpudrmfb from EFI VGA [ 1.410774] Console: switching to colour dummy device 80x25 [ 1.411012] [drm] initializing kernel modesetting (VEGA10 0x1002:0x687F 0x1849:0x1001 0xC3). [ 1.411025] [drm] register mmio base: 0xFCA00000 [ 1.411025] [drm] register mmio size: 524288 [ 1.411032] [drm] add ip block number 0 [ 1.411033] [drm] add ip block number 1 [ 1.411033] [drm] add ip block number 2 [ 1.411034] [drm] add ip block number 3 [ 1.411034] [drm] add ip block number 4 [ 1.411035] [drm] add ip block number 5 [ 1.411035] [drm] add ip block number 6 [ 1.411036] [drm] add ip block number 7 [ 1.411036] [drm] add ip block number 8 [ 1.411036] [drm] add ip block number 9 [ 1.411055] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_gpu_info.bin [ 1.411066] [drm] UVD(0) is enabled in VM mode [ 1.411066] [drm] UVD(0) ENC is enabled in VM mode [ 1.411067] [drm] VCE enabled in VM mode [ 1.411082] amdgpu 0000:0b:00.0: No more image in the PCI ROM [ 1.411099] ATOM BIOS: 113-TIC46561-001 [ 1.411117] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit [ 1.411122] amdgpu 0000:0b:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used) [ 1.411123] amdgpu 0000:0b:00.0: GART: 512M 0x000000F600000000 - 0x000000F61FFFFFFF [ 1.411126] [drm] Detected VRAM RAM=8176M, BAR=256M [ 1.411127] [drm] RAM width 2048bits HBM [ 1.411172] [TTM] Zone kernel: Available graphics memory: 8208974 kiB [ 1.411172] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 1.411173] [TTM] Initializing pool allocator [ 1.411176] [TTM] Initializing DMA pool allocator [ 1.411197] [drm] amdgpu: 8176M of VRAM memory ready [ 1.411197] [drm] amdgpu: 8176M of GTT memory ready. [ 1.411205] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.411312] [drm] PCIE GART of 512M enabled (table at 0x000000F400900000). [ 1.411465] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_sos.bin [ 1.411483] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_asd.bin [ 1.411536] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_acg_smc.bin [ 1.411563] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_pfp.bin [ 1.411576] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_me.bin [ 1.411589] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_ce.bin [ 1.411601] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_rlc.bin [ 1.411656] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_mec.bin [ 1.411715] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_mec2.bin [ 1.412403] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_sdma.bin [ 1.412419] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_sdma1.bin [ 1.412420] [drm] use_doorbell being set to: [true] [ 1.412455] [drm] use_doorbell being set to: [true] [ 1.412575] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_uvd.bin [ 1.412577] [drm] Found UVD firmware Version: 1.87 Family ID: 17 [ 1.412580] [drm] PSP loading UVD firmware [ 1.413098] amdgpu 0000:0b:00.0: firmware: direct-loading firmware amdgpu/vega10_vce.bin [ 1.413100] [drm] Found VCE firmware Version: 55.3 Binary ID: 4 [ 1.413104] [drm] PSP loading VCE firmware [ 1.496690] nvme nvme0: Shutdown timeout set to 8 seconds [ 1.533074] nvme0n1: p1 p2 p3 p4 [ 1.626501] ata9: SATA link down (SStatus 0 SControl 300) [ 1.704542] usb 1-5: new high-speed USB device number 2 using xhci_hcd [ 1.716040] usb 3-4: new full-speed USB device number 2 using xhci_hcd [ 1.745376] amdgpu: [powerplay] GPU over temperature range detected on PCIe 0:0.0! [ 1.756077] [drm] Display Core initialized with v3.1.59! [ 1.781519] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.781520] [drm] Driver supports precise vblank timestamp query. [ 1.788700] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.789682] ata1.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133 [ 1.789683] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.790710] ata1.00: configured for UDMA/133 [ 1.790878] scsi 0:0:0:0: Direct-Access ATA ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5 [ 1.793602] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.793604] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.793609] sd 0:0:0:0: [sda] Write Protect is off [ 1.793611] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.793618] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.804566] [drm] UVD and UVD ENC initialized successfully. [ 1.830478] sda: sda1 sda2 sda3 [ 1.830948] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.856808] tsc: Refined TSC clocksource calibration: 3693.064 MHz [ 1.856823] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a777c9a54b, max_idle_ns: 881590710692 ns [ 1.856870] clocksource: Switched to clocksource tsc [ 1.894809] usb 1-5: New USB device found, idVendor=08ec, idProduct=0008, bcdDevice= 1.00 [ 1.894811] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.894812] usb 1-5: Product: DataTraveler 2.0 [ 1.894813] usb 1-5: Manufacturer: Kingston [ 1.894814] usb 1-5: SerialNumber: 0BF1735141E268C7 [ 1.900050] usb 3-4: New USB device found, idVendor=046d, idProduct=c52e, bcdDevice=15.00 [ 1.900052] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.900053] usb 3-4: Product: USB Receiver [ 1.900054] usb 3-4: Manufacturer: Logitech [ 1.904184] [drm] VCE initialized successfully. [ 1.905403] kfd kfd: Allocated 3969056 bytes on gart [ 1.905415] Virtual CRAT table created for GPU [ 1.905416] Parsing CRAT table with 1 nodes [ 1.905424] Creating topology SYSFS entries [ 1.905508] Topology: Add dGPU node [0x687f:0x1002] [ 1.905546] kfd kfd: added device 1002:687f [ 1.906536] [drm] fb mappable at 0xE1000000 [ 1.906537] [drm] vram apper at 0xE0000000 [ 1.906537] [drm] size 8294400 [ 1.906538] [drm] fb depth is 24 [ 1.906538] [drm] pitch is 7680 [ 1.906588] fbcon: amdgpudrmfb (fb0) is primary device [ 1.911378] usb-storage 1-5:1.0: USB Mass Storage device detected [ 1.911465] scsi host9: usb-storage 1-5:1.0 [ 1.911518] usbcore: registered new interface driver usb-storage [ 1.912583] usbcore: registered new interface driver uas [ 1.936070] hidraw: raw HID events driver (C) Jiri Kosina [ 1.951168] Console: switching to colour frame buffer device 240x67 [ 1.954586] amdgpu 0000:0b:00.0: fb0: amdgpudrmfb frame buffer device [ 1.976272] usbcore: registered new interface driver usbhid [ 1.976273] usbhid: USB HID core driver [ 1.977586] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.0/0003:046D:C52E.0001/input/input2 [ 1.988114] amdgpu 0000:0b:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0 [ 1.988116] amdgpu 0000:0b:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0 [ 1.988117] amdgpu 0000:0b:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0 [ 1.988118] amdgpu 0000:0b:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0 [ 1.988119] amdgpu 0000:0b:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0 [ 1.988120] amdgpu 0000:0b:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0 [ 1.988121] amdgpu 0000:0b:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0 [ 1.988122] amdgpu 0000:0b:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0 [ 1.988123] amdgpu 0000:0b:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0 [ 1.988124] amdgpu 0000:0b:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0 [ 1.988125] amdgpu 0000:0b:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1 [ 1.988126] amdgpu 0000:0b:00.0: ring 11(sdma1) uses VM inv eng 5 on hub 1 [ 1.988127] amdgpu 0000:0b:00.0: ring 12(uvd<0>) uses VM inv eng 6 on hub 1 [ 1.988128] amdgpu 0000:0b:00.0: ring 13(uvd_enc0<0>) uses VM inv eng 7 on hub 1 [ 1.988129] amdgpu 0000:0b:00.0: ring 14(uvd_enc1<0>) uses VM inv eng 8 on hub 1 [ 1.988130] amdgpu 0000:0b:00.0: ring 15(vce0) uses VM inv eng 9 on hub 1 [ 1.988131] amdgpu 0000:0b:00.0: ring 16(vce1) uses VM inv eng 10 on hub 1 [ 1.988132] amdgpu 0000:0b:00.0: ring 17(vce2) uses VM inv eng 11 on hub 1 [ 1.988176] [drm] ECC is not present. [ 1.988963] [drm] Initialized amdgpu 3.27.0 20150101 for 0000:0b:00.0 on minor 0 [ 2.036046] usb 1-6: new low-speed USB device number 3 using xhci_hcd [ 2.036182] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:0c:00.3-4/input0 [ 2.036422] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.1/0003:046D:C52E.0002/input/input3 [ 2.036492] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.1/0003:046D:C52E.0002/input/input4 [ 2.096094] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:07.1/0000:0c:00.3/usb3/3-4/3-4:1.1/0003:046D:C52E.0002/input/input5 [ 2.096175] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:0c:00.3-4/input1 [ 2.105053] ata2: SATA link down (SStatus 0 SControl 300) [ 2.291715] usb 1-6: New USB device found, idVendor=1241, idProduct=1111, bcdDevice= 1.00 [ 2.291718] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.314634] input: HID 1241:1111 as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-6/1-6:1.0/0003:1241:1111.0003/input/input8 [ 2.314710] hid-generic 0003:1241:1111.0003: input,hidraw2: USB HID v1.00 Mouse [HID 1241:1111] on usb-0000:02:00.0-6/input0 [ 2.419966] ata5: SATA link down (SStatus 0 SControl 330) [ 2.440426] usb 1-8: new full-speed USB device number 4 using xhci_hcd [ 2.764713] usb 1-8: New USB device found, idVendor=2516, idProduct=0051, bcdDevice=11.01 [ 2.764716] usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [ 2.764717] usb 1-8: Product: AMD SR4 lamplight Control [ 2.764719] usb 1-8: Manufacturer: Cooler Master Technology Inc. [ 2.790586] input: Cooler Master Technology Inc. AMD SR4 lamplight Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-8/1-8:1.0/0003:2516:0051.0004/input/input9 [ 2.848581] hid-generic 0003:2516:0051.0004: input,hidraw3: USB HID v1.11 Keyboard [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:02:00.0-8/input0 [ 2.855762] hid-generic 0003:2516:0051.0005: hiddev1,hidraw4: USB HID v1.11 Device [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:02:00.0-8/input1 [ 2.861651] input: Cooler Master Technology Inc. AMD SR4 lamplight Control System Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-8/1-8:1.2/0003:2516:0051.0006/input/input10 [ 2.896431] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.897145] ata6.00: ATAPI: TSSTcorpDVD-ROM SH-D163B, SB01, max UDMA/33 [ 2.899202] ata6.00: configured for UDMA/33 [ 2.903254] scsi 5:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D163B SB01 PQ: 0 ANSI: 5 [ 2.916834] scsi 9:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.04 PQ: 0 ANSI: 0 CCS [ 2.918056] sd 9:0:0:0: [sdb] 2007040 512-byte logical blocks: (1.03 GB/980 MiB) [ 2.918252] sd 9:0:0:0: [sdb] Write Protect is off [ 2.918254] sd 9:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 2.918428] sd 9:0:0:0: [sdb] No Caching mode page found [ 2.918453] sd 9:0:0:0: [sdb] Assuming drive cache: write through [ 2.920056] input: Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-8/1-8:1.2/0003:2516:0051.0006/input/input11 [ 2.920088] hid-generic 0003:2516:0051.0006: input,hidraw5: USB HID v1.11 Device [Cooler Master Technology Inc. AMD SR4 lamplight Control] on usb-0000:02:00.0-8/input2 [ 2.920642] sdb: sdb1 [ 2.924248] sd 9:0:0:0: [sdb] Attached SCSI removable disk [ 2.997669] sr 5:0:0:0: [sr0] scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray [ 2.997671] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.998046] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 3.446097] PM: Image not found (code -22) [ 3.669837] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.541859] systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time. [ 4.758932] systemd[1]: Inserted module 'autofs4' [ 5.042698] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.060537] systemd[1]: Detected architecture x86-64. [ 5.081588] systemd[1]: Set hostname to . [ 5.734325] systemd[1]: Listening on Syslog Socket. [ 5.734406] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.737850] systemd[1]: Created slice User and Session Slice. [ 5.737901] systemd[1]: Listening on udev Kernel Socket. [ 5.737909] systemd[1]: Reached target Remote File Systems. [ 5.738157] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.738213] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.014517] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 6.211002] EtherCAT: Master driver 1.5.2 334c34cfd2e5+ [ 6.211068] EtherCAT: 1 master waiting for devices. [ 6.249425] systemd-journald[542]: Received request to flush runtime journal from PID 1 [ 6.295207] ec_generic: EtherCAT master generic Ethernet device module 1.5.2 334c34cfd2e5+ [ 6.295215] EtherCAT: Accepting 04:D9:F5:CD:BC:0F as main device for master 0. [ 6.295222] ec_generic: Binding socket to interface 2 (enp8s0). [ 6.328059] EtherCAT 0: Starting EtherCAT-IDLE thread. [ 6.905042] acpi_cpufreq: overriding BIOS provided _PSD data [ 6.936841] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver [ 6.970771] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address [ 6.970781] sp5100-tco sp5100-tco: Watchdog hardware is disabled [ 6.973343] input: PC Speaker as /devices/platform/pcspkr/input/input12 [ 7.326838] ccp 0000:0c:00.2: enabling device (0000 -> 0002) [ 7.461973] ccp 0000:0c:00.2: ccp enabled [ 7.462124] ccp 0000:0c:00.2: psp initialization failed [ 7.462127] ccp 0000:0c:00.2: enabled [ 7.642216] asus_wmi: ASUS WMI generic driver loaded [ 7.711242] kvm: Nested Virtualization enabled [ 7.711258] kvm: Nested Paging enabled [ 7.711259] SVM: Virtual VMLOAD VMSAVE supported [ 7.711260] SVM: Virtual GIF supported [ 7.774076] asus_wmi: Initialization: 0x0 [ 7.774119] asus_wmi: BIOS WMI version: 0.9 [ 7.774299] asus_wmi: SFUN value: 0x0 [ 7.855750] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input13 [ 7.885733] asus_wmi: Number of fans: 1 [ 8.003349] MCE: In-kernel MCE decoding enabled. [ 8.043524] snd_hda_intel 0000:0b:00.1: Handle vga_switcheroo audio client [ 8.044495] snd_hda_intel 0000:0d:00.3: enabling device (0000 -> 0002) [ 8.068715] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.068717] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.095507] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.105055] sd 9:0:0:0: Attached scsi generic sg1 type 0 [ 8.113739] sr 5:0:0:0: Attached scsi generic sg2 type 5 [ 8.182400] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.182402] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.265626] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.265629] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.307467] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 8.307470] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.307473] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 8.307475] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 8.307477] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0 [ 8.307479] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 8.307482] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 8.307484] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 8.307486] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 8.311473] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input14 [ 8.334250] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input15 [ 8.368001] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input16 [ 8.380844] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.380846] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.394912] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input17 [ 8.415779] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input20 [ 8.425754] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input18 [ 8.454634] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input21 [ 8.469763] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input19 [ 8.497185] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.497188] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.497201] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input22 [ 8.526570] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input23 [ 8.553558] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/sound/card1/input24 [ 8.596585] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.596586] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.683742] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.683745] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.789343] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.789346] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.906048] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.906050] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 8.999661] EDAC amd64: Node 0: DRAM ECC disabled. [ 8.999664] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.057706] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.057709] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.117486] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.117489] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.173357] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.173359] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.181666] Adding 16706556k swap on /dev/sda3. Priority:-2 extents:1 across:16706556k FS [ 9.241220] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.241223] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.305017] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.305019] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.373685] EDAC amd64: Node 0: DRAM ECC disabled. [ 9.373687] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 9.880859] audit: type=1400 audit(1614591597.385:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=798 comm="apparmor_parser" [ 9.880868] audit: type=1400 audit(1614591597.385:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=798 comm="apparmor_parser" [ 9.882252] audit: type=1400 audit(1614591597.385:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=797 comm="apparmor_parser" [ 9.882258] audit: type=1400 audit(1614591597.385:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=797 comm="apparmor_parser" [ 9.882262] audit: type=1400 audit(1614591597.385:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=797 comm="apparmor_parser" [ 9.899157] audit: type=1400 audit(1614591597.401:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=796 comm="apparmor_parser" [ 9.899162] audit: type=1400 audit(1614591597.401:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=796 comm="apparmor_parser" [ 10.859501] enp8s0: 0xffffb54802985000, 04:d9:f5:cd:bc:0f, IRQ 44 [ 12.935197] NET: Registered protocol family 3 [ 12.974726] r8168: enp8s0: link up [ 12.980041] EtherCAT 0: Link state of ecm0 changed to UP. [ 12.988050] EtherCAT 0: 1 slave(s) responding on main device. [ 12.988052] EtherCAT 0: Slave states on main device: PREOP. [ 12.988185] EtherCAT 0: Scanning bus. [ 13.074560] EtherCAT 0: Bus scanning completed in 84 ms. [ 13.074562] EtherCAT 0: Using slave 0 as DC reference clock. [ 13.110138] NET: Registered protocol family 5 [ 19.220048] EtherCAT WARNING 0: 1 datagram TIMED OUT! [ 19.220052] EtherCAT 0: 0 slave(s) responding on main device. [ 19.252204] ------------[ cut here ]------------ [ 19.252214] WARNING: CPU: 7 PID: 1150 at kernel/workqueue.c:2920 __flush_work.cold.50+0x1f/0x29 [ 19.252215] Modules linked in: appletalk psnap llc ax25 nls_ascii nls_cp437 vfat fat joydev snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi sg snd_hda_intel edac_mce_amd snd_hda_codec snd_hda_core eeepc_wmi snd_hwdep asus_wmi kvm_amd pcc_cpufreq sparse_keymap snd_pcm rfkill snd_timer kvm ccp video snd irqbypass wmi_bmof soundcore rng_core crct10dif_pclmul evdev crc32_pclmul ghash_clmulni_intel k10temp sp5100_tco pcspkr acpi_cpufreq ec_generic(OE) ec_master(OE) ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb sr_mod cdrom hid_generic usbhid hid uas usb_storage sd_mod amdkfd amdgpu chash gpu_sched i2c_algo_bit ttm crc32c_intel drm_kms_helper ahci xhci_pci aesni_intel xhci_hcd libahci aes_x86_64 crypto_simd drm cryptd libata glue_helper nvme usbcore r8168(OE) [ 19.252249] mfd_core scsi_mod i2c_piix4 nvme_core usb_common wmi gpio_amdpt gpio_generic button [ 19.252255] CPU: 7 PID: 1150 Comm: ifconfig Tainted: G OE 4.19.0-14-rt-amd64 #1 Debian 4.19.171-2 [ 19.252256] Hardware name: System manufacturer System Product Name/PRIME B450M-K, BIOS 1804 07/29/2019 [ 19.252258] RIP: 0010:__flush_work.cold.50+0x1f/0x29 [ 19.252260] Code: 9a 25 82 5b 8b 10 e9 7c 50 00 00 48 c7 c7 c0 1a 24 82 e8 70 50 00 00 0f 0b e9 ea 8c 97 ff 48 c7 c7 c0 1a 24 82 e8 5d 50 00 00 <0f> 0b 45 31 ed e9 d4 8c 97 ff 48 c7 c7 c0 1a 24 82 e8 47 50 00 00 [ 19.252261] RSP: 0018:ffffb54808b5fab8 EFLAGS: 00010246 [ 19.252263] RAX: 0000000000000024 RBX: ffff9984fb616db0 RCX: 0000000000000000 [ 19.252264] RDX: 0000000000000000 RSI: ffffffff82289673 RDI: 00000000ffffffff [ 19.252264] RBP: ffff9984fb616db0 R08: 0000000000000034 R09: 0000000000000004 [ 19.252265] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 [ 19.252266] R13: 0000000000000001 R14: ffffffff8149b7c0 R15: 00000000ffffff9d [ 19.252267] FS: 00007fce1758e540(0000) GS:ffff99850e7c0000(0000) knlGS:0000000000000000 [ 19.252268] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 19.252269] CR2: 00007fdba7d2c050 CR3: 00000003fa1ea000 CR4: 00000000003406e0 [ 19.252270] Call Trace: [ 19.252276] ? _synchronize_rcu_expedited+0x25a/0x300 [ 19.252279] ? work_busy+0x90/0x90 [ 19.252281] __cancel_work_timer+0x10a/0x190 [ 19.252284] ? migrate_enable+0x118/0x390 [ 19.252286] ? cpumask_next+0x16/0x20 [ 19.252288] ? pfifo_fast_reset+0xdd/0x130 [ 19.252294] rtl8168_close+0x41/0x1d0 [r8168] [ 19.252297] __dev_close_many+0x9c/0x110 [ 19.252300] __dev_change_flags+0xdd/0x210 [ 19.252302] dev_change_flags+0x21/0x60 [ 19.252304] devinet_ioctl+0x58c/0x6c0 [ 19.252307] inet_ioctl+0x143/0x220 [ 19.252310] ? dev_get_by_name_rcu+0x73/0x90 [ 19.252312] ? dev_get_by_name_rcu+0x73/0x90 [ 19.252314] ? dev_ioctl+0x355/0x570 [ 19.252316] sock_do_ioctl+0x43/0x140 [ 19.252319] sock_ioctl+0x19e/0x320 [ 19.252322] do_vfs_ioctl+0xa4/0x630 [ 19.252326] ? handle_mm_fault+0x106/0x230 [ 19.252327] ksys_ioctl+0x60/0x90 [ 19.252329] __x64_sys_ioctl+0x16/0x20 [ 19.252332] do_syscall_64+0x53/0x110 [ 19.252335] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 19.252337] RIP: 0033:0x7fce174bc427 [ 19.252338] Code: 00 00 90 48 8b 05 69 aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 39 aa 0c 00 f7 d8 64 89 01 48 [ 19.252339] RSP: 002b:00007ffefad20a98 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 19.252341] RAX: ffffffffffffffda RBX: 00007ffefad20aa0 RCX: 00007fce174bc427 [ 19.252341] RDX: 00007ffefad20aa0 RSI: 0000000000008914 RDI: 0000000000000005 [ 19.252342] RBP: 00007ffefad20b60 R08: 0000000000000008 R09: 0000000000000000 [ 19.252343] R10: fffffffffffffe07 R11: 0000000000000206 R12: 00000000fffffffe [ 19.252343] R13: 0000000000000005 R14: 0000000000000000 R15: 0000000000000000 [ 19.252346] ---[ end trace 0000000000000002 ]--- [ 19.284188] EtherCAT 0: Link state of ecm0 changed to DOWN. [ 19.287473] enp8s0: 0xffffb54802985000, 04:d9:f5:cd:bc:0f, IRQ 44 [ 19.416076] ------------[ cut here ]------------ [ 19.416086] WARNING: CPU: 8 PID: 1171 at kernel/workqueue.c:2920 __flush_work.cold.50+0x1f/0x29 [ 19.416087] Modules linked in: appletalk psnap llc ax25 nls_ascii nls_cp437 vfat fat joydev snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi sg snd_hda_intel edac_mce_amd snd_hda_codec snd_hda_core eeepc_wmi snd_hwdep asus_wmi kvm_amd pcc_cpufreq sparse_keymap snd_pcm rfkill snd_timer kvm ccp video snd irqbypass wmi_bmof soundcore rng_core crct10dif_pclmul evdev crc32_pclmul ghash_clmulni_intel k10temp sp5100_tco pcspkr acpi_cpufreq ec_generic(OE) ec_master(OE) ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb sr_mod cdrom hid_generic usbhid hid uas usb_storage sd_mod amdkfd amdgpu chash gpu_sched i2c_algo_bit ttm crc32c_intel drm_kms_helper ahci xhci_pci aesni_intel xhci_hcd libahci aes_x86_64 crypto_simd drm cryptd libata glue_helper nvme usbcore r8168(OE) [ 19.416120] mfd_core scsi_mod i2c_piix4 nvme_core usb_common wmi gpio_amdpt gpio_generic button [ 19.416127] CPU: 8 PID: 1171 Comm: ifconfig Tainted: G W OE 4.19.0-14-rt-amd64 #1 Debian 4.19.171-2 [ 19.416128] Hardware name: System manufacturer System Product Name/PRIME B450M-K, BIOS 1804 07/29/2019 [ 19.416130] RIP: 0010:__flush_work.cold.50+0x1f/0x29 [ 19.416132] Code: 9a 25 82 5b 8b 10 e9 7c 50 00 00 48 c7 c7 c0 1a 24 82 e8 70 50 00 00 0f 0b e9 ea 8c 97 ff 48 c7 c7 c0 1a 24 82 e8 5d 50 00 00 <0f> 0b 45 31 ed e9 d4 8c 97 ff 48 c7 c7 c0 1a 24 82 e8 47 50 00 00 [ 19.416133] RSP: 0018:ffffb548038dbab8 EFLAGS: 00010246 [ 19.416135] RAX: 0000000000000024 RBX: ffff9984fb616db0 RCX: 0000000000000000 [ 19.416136] RDX: 0000000000000000 RSI: ffffffff82289673 RDI: 00000000ffffffff [ 19.416137] RBP: ffff9984fb616db0 R08: 0000000000000034 R09: 0000000000000004 [ 19.416137] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 [ 19.416138] R13: 0000000000000001 R14: ffffffff8149b7c0 R15: 00000000ffffff9d [ 19.416140] FS: 00007fa3ed52f540(0000) GS:ffff99850e800000(0000) knlGS:0000000000000000 [ 19.416140] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 19.416141] CR2: 00007f8892884500 CR3: 00000003fd72c000 CR4: 00000000003406e0 [ 19.416142] Call Trace: [ 19.416149] ? _synchronize_rcu_expedited+0x25a/0x300 [ 19.416152] ? get_page_from_freelist+0x33f/0x1530 [ 19.416155] ? work_busy+0x90/0x90 [ 19.416157] __cancel_work_timer+0x10a/0x190 [ 19.416159] ? migrate_enable+0x118/0x390 [ 19.416161] ? cpumask_next+0x16/0x20 [ 19.416163] ? pfifo_fast_reset+0xdd/0x130 [ 19.416169] rtl8168_close+0x41/0x1d0 [r8168] [ 19.416173] __dev_close_many+0x9c/0x110 [ 19.416176] __dev_change_flags+0xdd/0x210 [ 19.416179] dev_change_flags+0x21/0x60 [ 19.416181] devinet_ioctl+0x58c/0x6c0 [ 19.416184] inet_ioctl+0x143/0x220 [ 19.416187] ? dev_get_by_name_rcu+0x73/0x90 [ 19.416189] ? dev_get_by_name_rcu+0x73/0x90 [ 19.416191] ? dev_ioctl+0x355/0x570 [ 19.416194] sock_do_ioctl+0x43/0x140 [ 19.416196] sock_ioctl+0x19e/0x320 [ 19.416200] do_vfs_ioctl+0xa4/0x630 [ 19.416203] ? handle_mm_fault+0x106/0x230 [ 19.416205] ksys_ioctl+0x60/0x90 [ 19.416207] __x64_sys_ioctl+0x16/0x20 [ 19.416210] do_syscall_64+0x53/0x110 [ 19.416213] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 19.416215] RIP: 0033:0x7fa3ed45d427 [ 19.416217] Code: 00 00 90 48 8b 05 69 aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 39 aa 0c 00 f7 d8 64 89 01 48 [ 19.416217] RSP: 002b:00007ffc7e2dfff8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 19.416219] RAX: ffffffffffffffda RBX: 00007ffc7e2e0000 RCX: 00007fa3ed45d427 [ 19.416220] RDX: 00007ffc7e2e0000 RSI: 0000000000008914 RDI: 0000000000000005 [ 19.416220] RBP: 00007ffc7e2e00c0 R08: 0000000000000008 R09: 0000000000000000 [ 19.416221] R10: fffffffffffffe07 R11: 0000000000000202 R12: 00000000fffffffe [ 19.416222] R13: 0000000000000005 R14: 0000000000000000 R15: 0000000000000000 [ 19.416224] ---[ end trace 0000000000000003 ]--- [ 19.586774] enp8s0: 0xffffb54802985000, 04:d9:f5:cd:bc:0f, IRQ 44 [ 21.678863] r8168: enp8s0: link up [ 21.680050] EtherCAT 0: Link state of ecm0 changed to UP. [ 21.688204] EtherCAT 0: 1 slave(s) responding on main device. [ 21.688206] EtherCAT 0: Slave states on main device: PREOP. [ 21.688353] EtherCAT 0: Scanning bus. [ 21.773702] EtherCAT 0: Bus scanning completed in 84 ms. [ 21.773704] EtherCAT 0: Using slave 0 as DC reference clock. [ 52.406828] EtherCAT: Requesting master 0... [ 52.406832] EtherCAT: Successfully requested master 0. [ 52.628386] EtherCAT 0: Domain0: Logical address 0x00000000, 28 byte, expected working counter 3. [ 52.628389] EtherCAT 0: Datagram domain0-0-main: Logical offset 0x00000000, 28 byte, type LRW. [ 52.628401] EtherCAT 0: Master thread exited. [ 52.628404] EtherCAT 0: Starting EtherCAT-OP thread. [ 52.628446] EtherCAT WARNING 0: 8 datagrams TIMED OUT! [ 52.723864] EtherCAT ERROR 0-0: Received error response: [ 52.723868] EtherCAT ERROR 0-0: SoE error 0x1001: "No IDN". [ 52.723870] EtherCAT DEBUG: [ 52.723870] 14 [ 52.723871] 40 [ 52.723871] 0A [ 52.723871] 80 [ 52.723872] 01 [ 52.723872] 10 [ 52.723873] 00 [ 52.723873] 00 [ 52.723873] 00 [ 52.723874] 00 [ 52.723874] 00 [ 52.723874] 00 [ 52.723875] 43 [ 52.723875] 23 [ 52.723876] EtherCAT ERROR 0-0: [ 52.723877] Writing [ 52.723878] IDN 0x800A failed. [ 52.723878] EtherCAT ERROR 0-0: SoE configuration failed. [ 87.136055] ------------[ cut here ]------------ [ 87.136068] WARNING: CPU: 1 PID: 1552 at kernel/workqueue.c:2920 __flush_work.cold.50+0x1f/0x29 [ 87.136069] Modules linked in: appletalk psnap llc ax25 nls_ascii nls_cp437 vfat fat joydev snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi sg snd_hda_intel edac_mce_amd snd_hda_codec snd_hda_core eeepc_wmi snd_hwdep asus_wmi kvm_amd pcc_cpufreq sparse_keymap snd_pcm rfkill snd_timer kvm ccp video snd irqbypass wmi_bmof soundcore rng_core crct10dif_pclmul evdev crc32_pclmul ghash_clmulni_intel k10temp sp5100_tco pcspkr acpi_cpufreq ec_generic(OE) ec_master(OE) ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb sr_mod cdrom hid_generic usbhid hid uas usb_storage sd_mod amdkfd amdgpu chash gpu_sched i2c_algo_bit ttm crc32c_intel drm_kms_helper ahci xhci_pci aesni_intel xhci_hcd libahci aes_x86_64 crypto_simd drm cryptd libata glue_helper nvme usbcore r8168(OE) [ 87.136107] mfd_core scsi_mod i2c_piix4 nvme_core usb_common wmi gpio_amdpt gpio_generic button [ 87.136115] CPU: 1 PID: 1552 Comm: ifconfig Tainted: G W OE 4.19.0-14-rt-amd64 #1 Debian 4.19.171-2 [ 87.136116] Hardware name: System manufacturer System Product Name/PRIME B450M-K, BIOS 1804 07/29/2019 [ 87.136119] RIP: 0010:__flush_work.cold.50+0x1f/0x29 [ 87.136122] Code: 9a 25 82 5b 8b 10 e9 7c 50 00 00 48 c7 c7 c0 1a 24 82 e8 70 50 00 00 0f 0b e9 ea 8c 97 ff 48 c7 c7 c0 1a 24 82 e8 5d 50 00 00 <0f> 0b 45 31 ed e9 d4 8c 97 ff 48 c7 c7 c0 1a 24 82 e8 47 50 00 00 [ 87.136124] RSP: 0018:ffffb5480abc3ab8 EFLAGS: 00010246 [ 87.136126] RAX: 0000000000000024 RBX: ffff9984fb616db0 RCX: 0000000000000000 [ 87.136127] RDX: 0000000000000000 RSI: ffffffff82289673 RDI: 00000000ffffffff [ 87.136128] RBP: ffff9984fb616db0 R08: 0000000000000034 R09: 0000000000000004 [ 87.136129] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 [ 87.136130] R13: 0000000000000001 R14: ffffffff8149b7c0 R15: 00000000ffffff9d [ 87.136132] FS: 00007f903fa82540(0000) GS:ffff99850e640000(0000) knlGS:0000000000000000 [ 87.136133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 87.136134] CR2: 00007fe5e61d1630 CR3: 0000000404410000 CR4: 00000000003406e0 [ 87.136135] Call Trace: [ 87.136142] ? _synchronize_rcu_expedited+0x25a/0x300 [ 87.136146] ? work_busy+0x90/0x90 [ 87.136148] __cancel_work_timer+0x10a/0x190 [ 87.136152] ? migrate_enable+0x118/0x390 [ 87.136154] ? cpumask_next+0x16/0x20 [ 87.136156] ? pfifo_fast_reset+0xdd/0x130 [ 87.136163] rtl8168_close+0x41/0x1d0 [r8168] [ 87.136168] __dev_close_many+0x9c/0x110 [ 87.136171] __dev_change_flags+0xdd/0x210 [ 87.136173] dev_change_flags+0x21/0x60 [ 87.136176] devinet_ioctl+0x58c/0x6c0 [ 87.136179] inet_ioctl+0x143/0x220 [ 87.136182] ? dev_get_by_name_rcu+0x73/0x90 [ 87.136185] ? dev_get_by_name_rcu+0x73/0x90 [ 87.136187] ? dev_ioctl+0x355/0x570 [ 87.136190] sock_do_ioctl+0x43/0x140 [ 87.136193] sock_ioctl+0x19e/0x320 [ 87.136196] do_vfs_ioctl+0xa4/0x630 [ 87.136200] ? handle_mm_fault+0x106/0x230 [ 87.136202] ksys_ioctl+0x60/0x90 [ 87.136204] __x64_sys_ioctl+0x16/0x20 [ 87.136207] do_syscall_64+0x53/0x110 [ 87.136210] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 87.136213] RIP: 0033:0x7f903f9b0427 [ 87.136215] Code: 00 00 90 48 8b 05 69 aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 39 aa 0c 00 f7 d8 64 89 01 48 [ 87.136216] RSP: 002b:00007ffe1bd10ab8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 87.136218] RAX: ffffffffffffffda RBX: 00007ffe1bd10ac0 RCX: 00007f903f9b0427 [ 87.136219] RDX: 00007ffe1bd10ac0 RSI: 0000000000008914 RDI: 0000000000000005 [ 87.136220] RBP: 00007ffe1bd10b80 R08: 0000000000000008 R09: 0000000000000000 [ 87.136221] R10: fffffffffffffe07 R11: 0000000000000206 R12: 00000000fffffffe [ 87.136222] R13: 0000000000000005 R14: 0000000000000000 R15: 0000000000000000 [ 87.136225] ---[ end trace 0000000000000004 ]--- [ 87.160869] EtherCAT 0: Link state of ecm0 changed to DOWN. [ 87.164043] EtherCAT ERROR 0-0: Failed to receive AL state datagram: [ 87.164045] Datagram [ 87.164049] error [ 87.164056] . [ 87.171952] enp8s0: 0xffffb54802985000, 04:d9:f5:cd:bc:0f, IRQ 44 [ 87.172054] EtherCAT 0: 0 slave(s) responding on main device. [ 87.744039] EtherCAT WARNING 0: 3 datagrams TIMED OUT! [ 87.788873] EtherCAT WARNING: Datagram 000000006467e7cb (domain0-0-main) was SKIPPED 56 times. [ 89.298702] r8168: enp8s0: link up [ 89.298879] EtherCAT 0: Link state of ecm0 changed to UP. [ 89.312044] EtherCAT 0: 1 slave(s) responding on main device. [ 89.312047] EtherCAT 0: Slave states on main device: PREOP. [ 89.314868] EtherCAT 0: Scanning bus. [ 89.625877] EtherCAT 0: Bus scanning completed in 312 ms. [ 89.625879] EtherCAT 0: Using slave 0 as DC reference clock. [ 89.679869] EtherCAT ERROR 0-0: Received error response: [ 89.679872] EtherCAT ERROR 0-0: SoE error 0x1001: "No IDN". [ 89.679873] EtherCAT DEBUG: [ 89.679874] 14 [ 89.679874] 40 [ 89.679874] 0A [ 89.679875] 80 [ 89.679875] 01 [ 89.679876] 10 [ 89.679876] 00 [ 89.679876] 00 [ 89.679877] 00 [ 89.679877] 00 [ 89.679877] 00 [ 89.679878] 00 [ 89.679878] 43 [ 89.679878] 23 [ 89.679879] EtherCAT ERROR 0-0: [ 89.679880] Writing [ 89.679881] IDN 0x800A failed. [ 89.679882] EtherCAT ERROR 0-0: SoE configuration failed. avc@debian:~$