#plasmac material file #the next line is required for version checking [VERSION 1] #example only, may be deleted #[MATERIAL_NUMBER_1] #NAME = #KERF_WIDTH = #THC = (0 = off, 1 = on) #PIERCE_HEIGHT = #PIERCE_DELAY = #PUDDLE_JUMP_HEIGHT = (optional, set to 0 or delete if not required) #PUDDLE_JUMP_DELAY = (optional, set to 0 or delete if not required) #CUT_HEIGHT = #CUT_SPEED = #CUT_AMPS = (optional, only used for operator information) #CUT_VOLTS = (modes 0 & 1 only, if not using auto voltage sampling)