LINUXCNC - 2.8.0 Machine configuration directory is '/home/user/linuxcnc/configs/by_machine.plasmac.gmoccapy' Machine configuration file is 'metric_plasmac.ini' Starting LinuxCNC... twopass:invoked with <> options twopass:found ./machine.hal twopass:found ././plasmac.tcl twopass:found ./plasmac_connections.hal Note: Using POSIX realtime config string '0x378 out' APP: test/plasmac_test.py found: Unexpected realtime delay on task 0 with period 30000 This Message will only display once per session. Run the Latency Test and resolve before continuing. Unexpected realtime delay on task 0 with period 30000 This Message will only display once per session. Run the Latency Test and resolve before continuing. (0, ' = ', '/usr/bin/gmoccapy') (1, ' = ', '-ini') (2, ' = ', '/home/user/linuxcnc/configs/by_machine.plasmac.gmoccapy/metric_plasmac.ini') Entry = trivkins Entry = coordinates=xyz found the following coordinates xyz **** GMOCCAPY GETINIINFO **** Number of joints = 3 3 COORDINATES found = xyz joint 0 = axis x joint 1 = axis y joint 2 = axis z {0: 'x', 1: 'y', 2: 'z'} ('found kinematics module', ['trivkins', 'coordinates=xyz']) **** GMOCCAPY GETINIINFO **** [KINS] KINEMATICS is trivkins Will use mode to switch between Joints and World mode hopefully supported by the used <> module **** GMOCCAPY GETINIINFO **** No DEFAULT_LINEAR_VELOCITY entry found in [TRAJ] of INI file Using half on MAX_LINEAR_VELOCITY **** GMOCCAPY GETINIINFO **** No MIN_ANGULAR_VELOCITY entry found in [DISPLAY] of INI file Using default value of 0.1 degree / min **** GMOCCAPY GETINIINFO **** No DEFAULT_ANGULAR_VELOCITY entry found in [DISPLAY] of INI file Using default value of 360 degree / min **** GMOCCAPY GETINIINFO **** No MAX_ANGULAR_VELOCITY entry found in [DISPLAY] of INI file Using default value of 3600 degree / min **** GMOCCAPY GETINIINFO **** No MAX_SPINDLE_OVERRIDE entry found in [DISPLAY] of INI file **** GMOCCAPY GETINIINFO **** No MIN_SPINDLE_OVERRIDE entry found in [DISPLAY] of INI file **** GMOCCAPY GETINIINFO **** No MAX_RAPID_OVERRIDE entry found in [DISPLAY] of INI file Default settings 100 % applied! **** GMOCCAPY GETINIINFO **** Preference file path: /home/user/linuxcnc/configs/by_machine.plasmac.gmoccapy/METRIC_PLASMAC.pref **** GMOCCAPY GETINIINFO **** No DEFAULT_SPINDLE_SPEED entry found in [DISPLAY] of INI file **** GMOCCAPY INFO **** **** no valid probe config in INI File **** **** disabled tool measurement **** **** GMOCCAPY INFO **** **** Entering make_DRO axis_list = ['x', 'y', 'z'] **** GMOCCAPY INFO **** **** Entering make ref axis button ('Filepath = ', '/usr/share/gmoccapy/images/ref_all.png') ('Filepath = ', '/usr/share/gmoccapy/images/ref_x.png') ('Filepath = ', '/usr/share/gmoccapy/images/ref_y.png') ('Filepath = ', '/usr/share/gmoccapy/images/ref_z.png') ('Filepath = ', '/usr/share/gmoccapy/images/unhome.png') **** GMOCCAPY INFO **** **** Entering make touch button **** GMOCCAPY INFO **** **** Entering make jog increments **** GMOCCAPY INFO **** **** Entering make jog button **** GMOCCAPY INFO **** **** Entering make macro button found 0 Macros **** GMOCCAPY INFO **** **** arrange DRO 3 **** GMOCCAPY INFO **** **** Place in table **** GMOCCAPY INFO **** **** get DRO order **** GMOCCAPY INFO **** **** arrange JOG button less than 6 axis /usr/bin/gmoccapy:326: GtkWarning: Invalid icon size 48 self.widgets.window1.show() ['box_cooling', 'box_spindle', 'ntb_preview', 'ntb_preview', 'ntb_preview', 'box_tool_and_code_info', 'ntb_preview'] **** GMOCCAPY INFO **** **** no audio available! **** **** PYGST libray not installed? **** **** is python-gstX.XX installed? **** **** GMOCCAPY INFO **** **** Entering init gremlin **** Kinematics type changed **** GMOCCAPY INFO **** **** No virtual keyboard installed, we checked for and . **** GMOCCAPY INFO: Gcode.lang found **** (gmoccapy:11150): GtkSourceView-CRITICAL **: 20:17:15.126: gtk_source_language_manager_set_search_path: assertion 'lm->priv->ids == NULL' failed **** GMOCCAPY INFO : inifile = /home/user/linuxcnc/configs/by_machine.plasmac.gmoccapy/metric_plasmac.ini ****: **** GMOCCAPY INFO : postgui halfile = None ****: Jog Pin Changed x+ Jog Button released = x+ Jog Pin Changed x- Jog Button released = x- Jog Pin Changed y+ Jog Button released = y+ Jog Pin Changed y- Jog Button released = y- Jog Pin Changed z+ Jog Button released = z+ Jog Pin Changed z- Jog Button released = z- /usr/lib/python2.7/dist-packages/gmoccapy/notification.py:168: GtkWarning: Invalid icon size 48 self.popup.show() gladevcp: trouble looking for handlers in 'plasmac_run': float() argument must be a string or a number Traceback (most recent call last): File "/usr/bin/gladevcp", line 129, in load_handlers objlist = h(halcomp,builder,useropts) File "./plasmac_run.py", line 1256, in get_handlers return [HandlerClass(halcomp,builder,useropts)] File "./plasmac_run.py", line 1218, in __init__ float(self.i.find('AXIS_Z', 'OFFSET_AV_RATIO'))) * 60 TypeError: float() argument must be a string or a number /usr/bin/gladevcp:221: RuntimeWarning: missing handler 'on_single_cut_pressed' builder.connect_signals(handlers) /usr/bin/gladevcp:221: RuntimeWarning: missing handler 'on_delete_clicked' builder.connect_signals(handlers) /usr/bin/gladevcp:221: RuntimeWarning: missing handler 'on_new_clicked' builder.connect_signals(handlers) /usr/bin/gladevcp:221: RuntimeWarning: missing handler 'on_save_clicked' builder.connect_signals(handlers) /usr/bin/gladevcp:221: RuntimeWarning: missing handler 'on_reload_clicked' builder.connect_signals(handlers) /usr/bin/gladevcp:221: RuntimeWarning: missing handler 'on_material_changed' builder.connect_signals(handlers) gladevcp: trouble looking for handlers in 'plasmac_config': float() argument must be a string or a number Traceback (most recent call last): File "/usr/bin/gladevcp", line 129, in load_handlers objlist = h(halcomp,builder,useropts) File "./plasmac_config.py", line 350, in get_handlers return [HandlerClass(halcomp,builder,useropts)] File "./plasmac_config.py", line 336, in __init__ float(self.i.find('AXIS_Z', 'OFFSET_AV_RATIO'))) * 60 TypeError: float() argument must be a string or a number /usr/bin/gladevcp:221: RuntimeWarning: missing handler 'on_setupFeedRate_value_changed' builder.connect_signals(handlers) /usr/bin/gladevcp:221: RuntimeWarning: missing handler 'on_save_clicked' builder.connect_signals(handlers) /usr/bin/gladevcp:221: RuntimeWarning: missing handler 'on_reload_clicked' builder.connect_signals(handlers) 50331651 48234499 Traceback (most recent call last): File "./plasmac_run.py", line 430, in material_change_number_changed if self.getMaterialBusy: AttributeError: HandlerClass instance has no attribute 'getMaterialBusy' Traceback (most recent call last): File "./plasmac_run.py", line 425, in first_material_changed if not self.material_exists(material): File "./plasmac_run.py", line 449, in material_exists if int(material) in self.materialList: AttributeError: HandlerClass instance has no attribute 'materialList' 46137347 44040195 52428803 37748739 54525955 /usr/bin/gmoccapy:5204: GtkWarning: Invalid icon size 48 gtk.main()