user@user:~/linuxcnc-grandixximo_1$ linuxcnc /home/user/linuxcnc/configs/sim.gmoccapy.homing/s_curve_gmoccapy.ini LINUXCNC - 2.10.0~pre1 Machine configuration directory is '/home/user/linuxcnc/configs/sim.gmoccapy.homing' Machine configuration file is 's_curve_gmoccapy.ini' Starting LinuxCNC... linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Note: Using POSIX realtime Found file(REL): ./core_sim.hal [Gmoccapy][INFO] INFO logging on (gmoccapy:6422) [Gmoccapy.COMMON.INIINFO][WARNING] INI Parsing Error, No MIN_LINEAR_VELOCITY Entry in DISPLAY, Using: 0 (iniinfo.py:655) [Gmoccapy.COMMON.INIINFO][WARNING] INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (iniinfo.py:655) [Gmoccapy.COMMON.INIINFO][WARNING] INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (iniinfo.py:655) [Gmoccapy.COMMON.INIINFO][WARNING] INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (iniinfo.py:655) [Gmoccapy.COMMON.INIINFO][WARNING] INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (iniinfo.py:655) [Gmoccapy.COMMON.INIINFO][WARNING] INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (iniinfo.py:655) [Gmoccapy.GMOCCAPY.GETINIINFO][INFO] Preference file path: /home/user/linuxcnc/configs/sim.gmoccapy.homing/gmoccapy.pref (getiniinfo.py:78) [Gmoccapy][INFO] No valid probe config in INI file. Tool measurement disabled. (gmoccapy:1139) [Gmoccapy][INFO] Found more than 14 macros, will use only the first 14. (gmoccapy:1366) task: main loop took 0.128425 seconds task: main loop took 0.054812 seconds [Gmoccapy][INFO] No embedded tabs configured or invalid configuration. No tabs will be added! (gmoccapy:1847) [Gmoccapy][INFO] Audio available! (gmoccapy:2240) [Gmoccapy][INFO] Audio enabled! (gmoccapy:2243) [Gmoccapy][WARNING] No virtual keyboard installed, we checked for . Try 'sudo apt-get install onboard'. (gmoccapy:2331) [Gmoccapy][INFO] Postgui commands: None (gmoccapy:6470) task: main loop took 0.080649 seconds task: main loop took 0.056543 seconds 1 2 task: main loop took 0.205285 seconds task: main loop took 0.054077 seconds task: main loop took 0.129728 seconds task: main loop took 0.055560 seconds task: main loop took 0.093342 seconds task: main loop took 0.055557 seconds 1 2 2 2 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.000000, tpos: 1.548130, dx: 1.548130 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.003046, tpos: 1.548130, dx: 1.545084 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.036379, tpos: 1.548130, dx: 1.511751 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.069713, tpos: 1.548130, dx: 1.478417 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.103046, tpos: 1.548130, dx: 1.445084 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.136379, tpos: 1.548130, dx: 1.411751 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.169712, tpos: 1.548130, dx: 1.378418 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.203046, tpos: 1.548130, dx: 1.345084 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.236379, tpos: 1.548130, dx: 1.311751 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.269712, tpos: 1.548130, dx: 1.278418 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.303045, tpos: 1.548130, dx: 1.245085 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.336379, tpos: 1.548130, dx: 1.211751 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.369712, tpos: 1.548130, dx: 1.178418 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.403045, tpos: 1.548130, dx: 1.145085 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.436379, tpos: 1.548130, dx: 1.111751 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.469712, tpos: 1.548130, dx: 1.078418 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.503045, tpos: 1.548130, dx: 1.045085 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.536378, tpos: 1.548130, dx: 1.011752 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.569712, tpos: 1.548130, dx: 0.978418 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.603045, tpos: 1.548130, dx: 0.945085 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.636378, tpos: 1.548130, dx: 0.911752 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.669711, tpos: 1.548130, dx: 0.878419 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.703045, tpos: 1.548130, dx: 0.845085 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.736378, tpos: 1.548130, dx: 0.811752 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.769711, tpos: 1.548130, dx: 0.778419 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.803044, tpos: 1.548130, dx: 0.745086 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.836378, tpos: 1.548130, dx: 0.711752 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.869711, tpos: 1.548130, dx: 0.678419 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.903044, tpos: 1.548130, dx: 0.645086 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.936378, tpos: 1.548130, dx: 0.611752 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.969711, tpos: 1.548130, dx: 0.578419 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 1.003044, tpos: 1.548130, dx: 0.545086 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 1.036377, tpos: 1.548130, dx: 0.511753 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 1.069711, tpos: 1.548130, dx: 0.478419 cvel: 16.666633, tvel: 0.000000 cacc: 0.000000 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 1.102725, tpos: 1.548130, dx: 0.445405 cvel: 16.347572, tvel: 0.000000 cacc: -159.530509 maxa: 300.000000, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.000000, tpos: 1.007251, dx: 1.007251 cvel: 16.666633, tvel: 1.513273 cacc: 0.000000 maxa: 323.817106, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.016313, tpos: 1.007251, dx: 0.990939 cvel: 16.666633, tvel: 1.513273 cacc: 0.000000 maxa: 323.817106, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.049646, tpos: 1.007251, dx: 0.957606 cvel: 16.666633, tvel: 1.513273 cacc: 0.000000 maxa: 323.817106, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.082979, tpos: 1.007251, dx: 0.924272 cvel: 16.666633, tvel: 1.513273 cacc: 0.000000 maxa: 323.817106, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.116312, tpos: 1.007251, dx: 0.890939 cvel: 16.666633, tvel: 1.513273 cacc: 0.000000 maxa: 323.817106, maxj: 1000.000000 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.249645, tpos: 1.007251, dx: 0.757606 cvel: 16.666633, tvel: 1.513273 cacc: 0.000000 maxa: 323.817106, maxj: 1000.000000 command (EMC_SPINDLE_OFF) cannot be executed until the machine is out of E-stop and turned on 2 2 Ruckig planning failed (first attempt), Back to tp 0 feed_override: 1.000000 max_vel: 16.666633 cpos: 0.000000, tpos: 0.693714, dx: 0.693714 cvel: 1.537766, tvel: 16.666633 cacc: 99.277035 maxa: 314.800609, maxj: 1000.000000