Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.8.2-11-g6a3d0a434 Machine configuration directory is '/home/cnc/linuxcnc/configs/7i95' Machine configuration file is '7i95.ini' INIFILE=/home/cnc/linuxcnc/configs/7i95/7i95.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io emc/iotask/ioControl.cc 702: can't load tool table. Starting HAL User Interface program: halui Found file(REL): ./7i95.hal hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 192.168.1.121: INFO: Hardware address (MAC): 00:60:1b:15:00:a7 hm2_eth: discovered 7I95 hm2/hm2_7i95.0: Low Level init 0.15 hm2/hm2_7i95.0: Smart Serial Firmware Version 43 hm2/hm2_7i95.0: 58 I/O Pins used: hm2/hm2_7i95.0: IO Pin 000 (TB3-02/TB3-03): StepGen #0, pin Step (Output) hm2/hm2_7i95.0: IO Pin 001 (TB3-04/TB3-05): StepGen #0, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 002 (TB3-08/TB3-09): StepGen #1, pin Step (Output) hm2/hm2_7i95.0: IO Pin 003 (TB3-10/TB3-11): StepGen #1, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 004 (TB3-14/TB3-15): StepGen #2, pin Step (Output) hm2/hm2_7i95.0: IO Pin 005 (TB3-16/TB3-17): StepGen #2, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 006 (TB3-20/TB3-21): StepGen #3, pin Step (Output) hm2/hm2_7i95.0: IO Pin 007 (TB3-22/TB3-23): StepGen #3, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 008 (TB4-02/TB4-03): StepGen #4, pin Step (Output) hm2/hm2_7i95.0: IO Pin 009 (TB4-04/TB4-05): StepGen #4, pin Direction (Output) hm2/hm2_7i95.0: IO Pin 010 (TB4-08/TB4-09): IOPort hm2/hm2_7i95.0: IO Pin 011 (TB4-10/TB4-11): IOPort hm2/hm2_7i95.0: IO Pin 012 (TB4-14/TB4-15): IOPort hm2/hm2_7i95.0: IO Pin 013 (TB4-16/TB4-17): IOPort hm2/hm2_7i95.0: IO Pin 014 (TB3-16/TB3-17): IOPort hm2/hm2_7i95.0: IO Pin 015 (TB4-20/TB4-21): IOPort hm2/hm2_7i95.0: IO Pin 016 (TB4-22/TB4-23): IOPort hm2/hm2_7i95.0: IO Pin 017 (TB4-22/TB4-23): IOPort hm2/hm2_7i95.0: IO Pin 018 (TB1-01/TB1-09): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_7i95.0: IO Pin 019 (TB1-04/TB1-12): Muxed Encoder #0, pin Muxed B (Input) hm2/hm2_7i95.0: IO Pin 020 (TB1-07/TB1-15): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_7i95.0: IO Pin 021 (TB1-17/TB2-01): IOPort hm2/hm2_7i95.0: IO Pin 022 (TB1-20/TB2-04): IOPort hm2/hm2_7i95.0: IO Pin 023 (TB1-23/TB2-07): IOPort hm2/hm2_7i95.0: IO Pin 024 (TB2-09/TB2-17): IOPort hm2/hm2_7i95.0: IO Pin 025 (TB2-12/TB2-20): IOPort hm2/hm2_7i95.0: IO Pin 026 (TB2-15/TB2-23): IOPort hm2/hm2_7i95.0: IO Pin 027 (Internal EncMux): Muxed Encoder Select #0, pin Mux Select 0 (Output) hm2/hm2_7i95.0: IO Pin 028 (Internal InMux0): InMux Input Mux #0, pin addr0 (Output) hm2/hm2_7i95.0: IO Pin 029 (Internal InMux1): InMux Input Mux #0, pin addr1 (Output) hm2/hm2_7i95.0: IO Pin 030 (Internal InMux2): InMux Input Mux #0, pin addr2 (Output) hm2/hm2_7i95.0: IO Pin 031 (Internal InMux3): InMux Input Mux #0, pin addr3 (Output) hm2/hm2_7i95.0: IO Pin 032 (Internal InMux4): InMux Input Mux #0, pin addr4 (Output) hm2/hm2_7i95.0: IO Pin 033 (Internal InMuxData): InMux Input Mux #0, pin muxdata (Input) hm2/hm2_7i95.0: IO Pin 034 (TB5-13/TB5-14): SSR #0, pin Out-00 (Output) hm2/hm2_7i95.0: IO Pin 035 (TB5-15/TB5-16): SSR #0, pin Out-01 (Output) hm2/hm2_7i95.0: IO Pin 036 (TB5-17/TB5-18): SSR #0, pin Out-02 (Output) hm2/hm2_7i95.0: IO Pin 037 (TB5-19/TB5-20): SSR #0, pin Out-03 (Output) hm2/hm2_7i95.0: IO Pin 038 (TB5-21/TB5-22): SSR #0, pin Out-04 (Output) hm2/hm2_7i95.0: IO Pin 039 (TB5-23/TB5-24): SSR #0, pin Out-05 (Output) hm2/hm2_7i95.0: IO Pin 040 (internal): SSR #0, pin AC Ref (internal) (Output) hm2/hm2_7i95.0: IO Pin 041 (P1-01): IOPort hm2/hm2_7i95.0: IO Pin 042 (P1-02): IOPort hm2/hm2_7i95.0: IO Pin 043 (P1-03): IOPort hm2/hm2_7i95.0: IO Pin 044 (P1-04): IOPort hm2/hm2_7i95.0: IO Pin 045 (P1-05): IOPort hm2/hm2_7i95.0: IO Pin 046 (P1-06): IOPort hm2/hm2_7i95.0: IO Pin 047 (P1-07): IOPort hm2/hm2_7i95.0: IO Pin 048 (P1-08): IOPort hm2/hm2_7i95.0: IO Pin 049 (P1-09): IOPort hm2/hm2_7i95.0: IO Pin 050 (P1-11): IOPort hm2/hm2_7i95.0: IO Pin 051 (P1-13): IOPort hm2/hm2_7i95.0: IO Pin 052 (P1-15): IOPort hm2/hm2_7i95.0: IO Pin 053 (P1-17): IOPort hm2/hm2_7i95.0: IO Pin 054 (P1-19): IOPort hm2/hm2_7i95.0: IO Pin 055 (P1-21): IOPort hm2/hm2_7i95.0: IO Pin 056 (P1-23): IOPort hmFound file(REL): ./custom.hal Starting TASK program: milltask Starting DISPLAY program: axis Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 91 cycles, min=0.000027, max=0.012953, avg=0.008416, 0 latency excursions (> 10x expected cycle time of 0.010000s) 2/hm2_7i95.0: IO Pin 057 (P1-25): IOPort hm2/hm2_7i95.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime note: MAXV max: 100.000 units/sec 6000.000 units/min note: LJOG max: 100.000 units/sec 6000.000 units/min note: LJOG default: 50.000 units/sec 3000.000 units/min note: jog_order='XYZ' note: jog_invert=set([]) Could not open command file 'postgui_call_list.hal' 1566 1608 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Mi 23. Mär 15:13:07 CET 2022 UTC Date: Mi 23. Mär 14:13:07 UTC 2022 this program: /usr/bin/linuxcnc_info uptime: 15:13:07 up 1 min, 1 user, load average: 0,51, 0,21, 0,08 lsb_release -sa: Debian Debian GNU/Linux 10 (buster) 10 buster which linuxcnc: /usr/bin/linuxcnc pwd: /home/cnc/linuxcnc/configs/7i95 USER: cnc LOGNAME: cnc HOME: /home/cnc EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: xfce display size: 1920x1080 pixels (508x285 millimeters) PATH: /usr/bin:/home/cnc/linuxcnc/configs/7i95/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: CNC kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Debian 4.19.232-1 (2022-03-07) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-4.19.0-19-rt-amd64 root=UUID=eed6681a-1711-4683-9106-cbaa7298d14c ro quiet model name: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz cores: 2 cpu MHz: 3646.245 parport: serial: Versions: gcc: gcc (Debian 8.3.0-6) 8.3.0 python: Python 2.7.16 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.8.2-11-g6a3d0a434 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /etc/init.d/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib dpkg -l '*linuxcnc*': Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten | Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/ Halb installiert/Trigger erWartet/Trigger anhängig |/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht) ||/ Name Version Architektur Beschreibung +++-===================-=====================-============-===================================================================== un linuxcnc (keine Beschreibung vorhanden) un linuxcnc-dev (keine Beschreibung vorhanden) un linuxcnc-doc (keine Beschreibung vorhanden) ii linuxcnc-doc-en 1:2.8.2.11.g6a3d0a434 all motion controller for CNC machines and robots (English documentation) ii linuxcnc-doc-es 1:2.8.2.11.g6a3d0a434 all controlador de movimiento para máquinas CNC y robots (Español). ii linuxcnc-doc-fr 1:2.8.2.11.g6a3d0a434 all motion controller for CNC machines and robots (French documentation) un linuxcnc-sim (keine Beschreibung vorhanden) un linuxcnc-sim-dev (keine Beschreibung vorhanden) ii linuxcnc-uspace 1:2.8.2.11.g6a3d0a434 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.8.2.11.g6a3d0a434 amd64 PC based motion controller for real-time Linux