LINUXCNC - 2.8.4 Machine configuration directory is '/home/cnc/linuxcnc/configs/cnc0' Machine configuration file is 'cnc0-inc.ini.expanded' Starting LinuxCNC... twopass:invoked with <> options twopass:found ./cnc0.hal twopass:found ./custom.hal twopass:pass0: loadusr -W hal_manualtoolchange Note: Using POSIX realtime config string '0x378 out' No parport registered at 0x378. This is not always an error. Continuing. No parport registered at 0x378. This is not always an error. Continuing. task: main loop took 0.012692 seconds task: main loop took 0.012054 seconds note: MAXV max: 30.000 units/sec 1800.000 units/min note: LJOG max: 30.000 units/sec 1800.000 units/min note: LJOG default: 20.000 units/sec 1200.000 units/min note: jog_order='XYZ' note: jog_invert=set([]) [QtDesigner][INFO] Logging to "/home/cnc/qtdesigner.log" (logger.py:88) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_ANGULAR_VELOCITY Entry in DISPLAY, Using: 6 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_ANGULAR_VELOCITY Entry in DISPLAY, Using: 1 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_ANGULAR_VELOCITY Entry in DISPLAY, Using: 60 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] INI Parsing Error, No MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:365) [QtDesigner.QTVCP.QT_ISTAT][WARNING] Embeded tab configuration -invalaid number of TAB_NAMES vrs TAB_LOCATION - guessng default. (qt_istat.py:340) [QTvcp][INFO] Logging to "/home/cnc/qtvcp.log" (logger.py:88) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] BASENAME cam_align (qt_pstat.py:58) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for handler file in: /home/cnc/linuxcnc/configs/cnc0/cam_align_handler.py (qt_pstat.py:78) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for default handler file in: /usr/share/qtvcp/panels/cam_align/cam_align_handler.py (qt_pstat.py:84) [QtDesigner.QTVCP.QT_PSTAT][INFO] Using DEFAULT handler file path: /usr/share/qtvcp/panels/cam_align/cam_align_handler.py (qt_pstat.py:87) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in: /home/cnc/linuxcnc/configs/cnc0/cam_align.ui (qt_pstat.py:104) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in: /usr/share/qtvcp/panels/cam_align/cam_align.ui (qt_pstat.py:109) [QtDesigner.QTVCP.QT_PSTAT][INFO] Using DEFAULT ui file from /usr/share/qtvcp/panels/cam_align/cam_align.ui (qt_pstat.py:111) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /home/cnc/linuxcnc/configs/cnc0/cam_align.qss (qt_pstat.py:144) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /usr/share/qtvcp/panels/cam_align/cam_align.qss (qt_pstat.py:149) [QtDesigner.QTVCP.QT_PSTAT][INFO] No qss file found (qt_pstat.py:155) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /home/cnc/linuxcnc/configs/cnc0/cam_align.qrc (qt_pstat.py:170) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /usr/share/qtvcp/panels/cam_align/cam_align.qrc (qt_pstat.py:176) [QtDesigner.QTVCP.QT_PSTAT][INFO] No qrc file found (qt_pstat.py:183) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for resources.py in: /home/cnc/linuxcnc/configs/cnc0/resources.py (qt_pstat.py:199) [QtDesigner.QTVCP.QT_PSTAT][DEBUG] Checking for resources.py in: /usr/share/qtvcp/panels/cam_align/resources.py (qt_pstat.py:210) [QtDesigner.QTVCP.QT_PSTAT][INFO] No resources.py file found, No QRC file to compile one from. (qt_pstat.py:222) [QTvcp][INFO] Building A VCP Panel (qtvcp:162) [QTvcp][INFO] No handler file specified - using /usr/share/qtvcp/panels/cam_align/cam_align_handler.py (qtvcp:165) [QTvcp][DEBUG] Loading the handler file (qtvcp:200) Waiting for component 'qtvcp_embed' to become ready...........................................................task: main loop took 0.010494 seconds ..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................task: main loop took 0.010647 seconds ..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................:0: waitpid failed qtvcp qtvcp_embed :0: qtvcp exited without becoming ready Embeded tab command "halcmd loadusr -Wn qtvcp_embed qtvcp -d -c qtvcp_embed -x 83886373 -o size=800,600 cam_align" exited with error: 1 Shutting down and cleaning up LinuxCNC... task: 137769 cycles, min=0.000028, max=0.012692, avg=0.001067, 4 latency excursions (> 10x expected cycle time of 0.001000s) Note: Using POSIX realtime LinuxCNC terminated with an error. You can find more information in the log: /home/cnc/linuxcnc_debug.txt and /home/cnc/linuxcnc_print.txt as well as in the output of the shell command 'dmesg' and in the terminal