Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.8.2 Machine configuration directory is '/home/pmr/linuxcnc/configs/plasmacutter' Machine configuration file is 'plasmacutter.ini' INIFILE=/home/pmr/linuxcnc/configs/plasmacutter/plasmacutter.ini VERSION=1.1 PARAMETER_FILE=metric_parameters.txt TASK=milltask HALUI=halui DISPLAY=axis COORDINATES=XYZ KINEMATICS=trivkins coordinates=XYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui twopass:invoked with <> options twopass:found ./plasmacutter.hal twopass:found ././plasmac/plasmac.tcl twopass:found ./plasmacutter_connections.hal twopass: Error in file ./plasmacutter.hal: setting parameter 'hm2_5i25.0.7i77.0.0.output-00' to 'true' parameter or pin 'hm2_5i25.0.7i77.0.0.output-00' not found twopass: Error in file ././plasmac/plasmac.tcl: Pin 'db_float.out' does not exist twopass: Error in file ./plasmacutter_connections.hal: Pin 'hm2_5i25.0.7i77.0.0.input-15' does not exist Shutting down and cleaning up LinuxCNC... hm2: loading Mesa HostMot2 driver version 0.15 hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 hm2_pci: discovered 5i25 at 0000:03:02.0 hm2/hm2_5i25.0: Low Level init 0.15 hm2/hm2_5i25.0: Smart Serial Firmware Version 43 hm2/hm2_5i25.0: 34 I/O Pins used: hm2/hm2_5i25.0: IO Pin 000 (P3-01): IOPort hm2/hm2_5i25.0: IO Pin 001 (P3-14): IOPort hm2/hm2_5i25.0: IO Pin 002 (P3-02): IOPort hm2/hm2_5i25.0: IO Pin 003 (P3-15): IOPort hm2/hm2_5i25.0: IO Pin 004 (P3-03): IOPort hm2/hm2_5i25.0: IO Pin 005 (P3-16): IOPort hm2/hm2_5i25.0: IO Pin 006 (P3-04): IOPort hm2/hm2_5i25.0: IO Pin 007 (P3-17): Muxed Encoder Select #0, pin Mux Select 0 (Output) hm2/hm2_5i25.0: IO Pin 008 (P3-05): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_5i25.0: IO Pin 009 (P3-06): Muxed Encoder #0, pin Muxed B (Input) hm2/hm2_5i25.0: IO Pin 010 (P3-07): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_5i25.0: IO Pin 011 (P3-08): Muxed Encoder #1, pin Muxed A (Input) hm2/hm2_5i25.0: IO Pin 012 (P3-09): Muxed Encoder #1, pin Muxed B (Input) hm2/hm2_5i25.0: IO Pin 013 (P3-10): Muxed Encoder #1, pin Muxed Index (Input) hm2/hm2_5i25.0: IO Pin 014 (P3-11): Muxed Encoder #2, pin Muxed A (Input) hm2/hm2_5i25.0: IO Pin 015 (P3-12): Muxed Encoder #2, pin Muxed B (Input) hm2/hm2_5i25.0: IO Pin 016 (P3-13): Muxed Encoder #2, pin Muxed Index (Input) hm2/hm2_5i25.0: IO Pin 017 (P2-01): StepGen #0, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 018 (P2-14): StepGen #0, pin Step (Output) hm2/hm2_5i25.0: IO Pin 019 (P2-02): StepGen #1, pin Direction (Output) hm2/hm2_5i25.0: IO Pin 020 (P2-15): StepGen #1, pin Step (Output) hm2/hm2_5i25.0: IO Pin 021 (P2-03): IOPort hm2/hm2_5i25.0: IO Pin 022 (P2-16): IOPort hm2/hm2_5i25.0: IO Pin 023 (P2-04): IOPort hm2/hm2_5i25.0: IO Pin 024 (P2-17): IOPort hm2/hm2_5i25.0: IO Pin 025 (P2-05): IOPort hm2/hm2_5i25.0: IO Pin 026 (P2-06): IOPort hm2/hm2_5i25.0: IO Pin 027 (P2-07): IOPort hm2/hm2_5i25.0: IO Pin 028 (P2-08): IOPort hm2/hm2_5i25.0: IO Pin 029 (P2-09): IOPort hm2/hm2_5i25.0: IO Pin 030 (P2-10): IOPort hm2/hm2_5i25.0: IO Pin 031 (P2-11): IOPort hm2/hm2_5i25.0: IO Pin 032 (P2-12): IOPort hm2/hm2_5i25.0: IO Pin 033 (P2-13): IOPort hm2/hm2_5i25.0: registered hm2_5i25.0: initialized AnyIO board at 0000:03:02.0 hm2_5i25.0: dropping AnyIO board at 0000:03:02.0 hm2/hm2_5i25.0: unregistered hm2_pci: driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime 2369 Stopping realtime threads Unloading hal components RTAPI_PCI: Unmapped 65536 bytes at 0x7f666dda2000 Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Thu 19 May 14:11:35 BST 2022 UTC Date: Thu 19 May 13:11:35 UTC 2022 this program: /usr/bin/linuxcnc_info uptime: 14:11:35 up 9 min, 1 user, load average: 0.03, 0.26, 0.19 lsb_release -sa: Debian Debian GNU/Linux 9.13 (stretch) 9.13 stretch which linuxcnc: /usr/bin/linuxcnc pwd: /home/pmr/linuxcnc/configs/plasmacutter USER: pmr LOGNAME: pmr HOME: /home/pmr EDITOR: VISUAL: LANGUAGE: en_GB:en TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1920x1080 pixels (508x285 millimeters) PATH: /usr/bin:/home/pmr/linuxcnc/configs/plasmacutter/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: LinuxCNC kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT RT Debian 4.9.303-1 (2022-03-07) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-4.9.0-18-rt-amd64 root=UUID=178cc63a-0d4e-4307-a5c1-e6d547555b29 ro quiet model name: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz cores: 4 cpu MHz: 1702.282 parport: 0000-0000 : parport0 0000-0000 : parport0 serial: 0000-0000 : serial Versions: gcc: gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516 python: Python 2.7.13 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH glade-gtk2: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.8.2 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /etc/init.d/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================-============================-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 1:2.9.0~pre0.6478.g4502222c7 all motion controller for CNC machines and robots (English documentation) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 1:2.8.2 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 1:2.8.2 amd64 PC based motion controller for real-time Linux