Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.0~pre0 Machine configuration directory is '/home/joey/linuxcnc/configs/test4' Machine configuration file is 'test4.ini' INIFILE=/home/joey/linuxcnc/configs/test4/test4.ini VERSION=1.1 PARAMETER_FILE=linuxcnc.var TPMOD= HOMEMOD= TASK=milltask HALUI=halui DISPLAY=qtvcp qtplasmac COORDINATES=XYYZ KINEMATICS=trivkins coordinates=XYYZ Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod Found file(REL): ./test4.hal Found file(lib): /usr/share/linuxcnc/hallib/qtplasmac_comp.hal Found file(REL): ./custom.hal Starting TASK program: milltask Starting DISPLAY program: qtvcp hm2/hm2_7i92.0: error finishing read! iter=444 Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 3564 cycles, min=0.000021, max=0.012849, avg=0.009995, 0 latency excursions (> 10x expected cycle time of 0.010000s) identityKinematicsSetup: coordinates:XYYZ Joint 0 ==> Axis X Joint 1 ==> Axis Y Joint 2 ==> Axis Y Joint 3 ==> Axis Z identityKinematicsSetup: Recommend: kinstype=both hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:11:06:c3 hm2_eth: discovered 7I92 hm2/hm2_7i92.0: Low Level init 0.15 hm2/hm2_7i92.0: Smart Serial Firmware Version 43 Board hm2_7i92.0.7i77.0.0 Hardware Mode 0 = standard Board hm2_7i92.0.7i77.0.0 Software Mode 0 = input_output Board hm2_7i92.0.7i77.0.0 Software Mode 1 = io_analog Board hm2_7i92.0.7i77.0.0 Software Mode 2 = io_analog_fieldvoltage Board hm2_7i92.0.7i77.0.0 Software Mode 3 = io_encoder_analog_fieldvoltage Board hm2_7i92.0.7i77.0.1 Hardware Mode 0 = standard Board hm2_7i92.0.7i77.0.1 Software Mode 0 = analogout_enables hm2/hm2_7i92.0: 34 I/O Pins used: hm2/hm2_7i92.0: IO Pin 000 (P2-01): IOPort hm2/hm2_7i92.0: IO Pin 001 (P2-14): IOPort hm2/hm2_7i92.0: IO Pin 002 (P2-02): IOPort hm2/hm2_7i92.0: IO Pin 003 (P2-15): Smart Serial Interface #0, pin tx1 (Output) hm2/hm2_7i92.0: IO Pin 004 (P2-03): Smart Serial Interface #0, pin rx1 (Input) hm2/hm2_7i92.0: IO Pin 005 (P2-16): Smart Serial Interface #0, pin tx0 (Output) hm2/hm2_7i92.0: IO Pin 006 (P2-04): Smart Serial Interface #0, pin rx0 (Input) hm2/hm2_7i92.0: IO Pin 007 (P2-17): Muxed Encoder Select #0, pin Mux Select 0 (Output) hm2/hm2_7i92.0: IO Pin 008 (P2-05): Muxed Encoder #0, pin Muxed A (Input) hm2/hm2_7i92.0: IO Pin 009 (P2-06): Muxed Encoder #0, pin Muxed B (Input) hm2/hm2_7i92.0: IO Pin 010 (P2-07): Muxed Encoder #0, pin Muxed Index (Input) hm2/hm2_7i92.0: IO Pin 011 (P2-08): Muxed Encoder #1, pin Muxed A (Input) hm2/hm2_7i92.0: IO Pin 012 (P2-09): Muxed Encoder #1, pin Muxed B (Input) hm2/hm2_7i92.0: IO Pin 013 (P2-10): Muxed Encoder #1, pin Muxed Index (Input) hm2/hm2_7i92.0: IO Pin 014 (P2-11): IOPort hm2/hm2_7i92.0: IO Pin 015 (P2-12): IOPort hm2/hm2_7i92.0: IO Pin 016 (P2-13): IOPort hm2/hm2_7i92.0: IO Pin 017 (P1-01): IOPort hm2/hm2_7i92.0: IO Pin 018 (P1-14): IOPort hm2/hm2_7i92.0: IO Pin 019 (P1-02): IOPort hm2/hm2_7i92.0: IO Pin 020 (P1-15): IOPort hm2/hm2_7i92.0: IO Pin 021 (P1-03): IOPort hm2/hm2_7i92.0: IO Pin 022 (P1-16): IOPort hm2/hm2_7i92.0: IO Pin 023 (P1-04): IOPort hm2/hm2_7i92.0: IO Pin 024 (P1-17): IOPort hm2/hm2_7i92.0: IO Pin 025 (P1-05): IOPort hm2/hm2_7i92.0: IO Pin 026 (P1-06): IOPort hm2/hm2_7i92.0: IO Pin 027 (P1-07): IOPort hm2/hm2_7i92.0: IO Pin 028 (P1-08): IOPort hm2/hm2_7i92.0: IO Pin 029 (P1-09): IOPort hm2/hm2_7i92.0: IO Pin 030 (P1-10): IOPort hm2/hm2_7i92.0: IO Pin 031 (P1-11): IOPort hm2/hm2_7i92.0: IO Pin 032 (P1-12): IOPort hm2/hm2_7i92.0: IO Pin 033 (P1-13): IOPort hm2/hm2_7i92.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime [QTvcp][INFO] Logging to "/home/joey/qtvcp.log" (logger.py:102) Warning: Ignoring XDG_SESSION_TYPE=wayland on Gnome. Use QT_QPA_PLATFORM=wayland to run on Wayland anyway. hm2/hm2_7i92.0: error finishing read! iter=444 [QTvcp.QTVCP.QT_PSTAT][INFO] Using DEFAULT handler file path: /usr/share/qtvcp/screens/qtplasmac/qtplasmac_handler.py (qt_pstat.py:105) [QTvcp.QTVCP.QT_PSTAT][INFO] Using DEFAULT ui file from /usr/share/qtvcp/screens/qtplasmac/qtplasmac.ui (qt_pstat.py:126) [QTvcp.QTVCP.QT_PSTAT][INFO] No qss file found (qt_pstat.py:162) [QTvcp.QTVCP.QT_PSTAT][INFO] No qrc file found (qt_pstat.py:186) [QTvcp.QTVCP.QT_PSTAT][INFO] No resources.py file found, No QRC file to compile one from. (qt_pstat.py:207) [QTvcp.QTVCP.QT_PSTAT][INFO] Using no translations. Default system locale is: en (qt_pstat.py:224) [QTvcp][INFO] Building A Linuxcnc Main Screen with Python 3 (qtvcp:162) [QTvcp][INFO] No handler file specified on command line (qtvcp:170) [QTvcp][INFO] No HAL component base name specified on command line using: qtplasmac (qtvcp:201) [QTvcp.QTVCP.QT_MAKEGUI][INFO] Qsettings file path: /home/joey/.config/QtVcp/qtplasmac.conf (qt_makegui.py:99) [QTvcp.QTVCP.QT_MAKEGUI][INFO] No resource file to load: None (qt_makegui.py:194) [QTvcp.QTVCP.QT_MAKEGUI][INFO] no Handler Override file at: /home/joey/linuxcnc/configs/test4/.qtplasmacrc (qt_makegui.py:360) [QTvcp][INFO] postgui filename: ['custom_postgui.hal'] (qtvcp:409) [QTvcp][INFO] postgui commands: None (qtvcp:420) [QTvcp][INFO] Preference path: /home/joey/linuxcnc/configs/test4/qtvcp.prefs (qtvcp:399) /usr/bin/linuxcnc: line 963: 6735 Segmentation fault $EMCDISPLAY -ini "$INIFILE" $EMCDISPLAYARGS $EXTRA_ARGS 6678 6732 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Sun 3 Apr 16:34:11 BST 2022 UTC Date: Sun 3 Apr 15:34:11 UTC 2022 this program: /usr/bin/linuxcnc_info uptime: 16:34:11 up 2:09, 1 user, load average: 0.89, 0.83, 0.63 lsb_release -sa: Debian Debian GNU/Linux 11 (bullseye) 11 bullseye linuxcnc: /usr/bin/linuxcnc pwd: /home/joey/linuxcnc/configs/test4 USER: joey LOGNAME: joey HOME: /home/joey EDITOR: VISUAL: LANGUAGE: en_GB:en TERM: dumb COLORTERM: DISPLAY: :0 DESKTOP: gnome display size: 1366x768 pixels (361x203 millimeters) PATH: /usr/bin:/home/joey/linuxcnc/configs/test4/bin:/usr/bin:/home/joey/.local/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: cnc kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT_RT Debian 5.10.106-1 (2022-03-17) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-5.10.0-13-rt-amd64 root=UUID=27f6be76-8246-46ec-a75a-799e68ae736f ro quiet model name: Intel(R) Celeron(R) CPU J1900 @ 1.99GHz cores: 4 cpu MHz: 2293.114 parport: 0000-0000 : parport0 0000-0000 : parport0 serial: 0000-0000 : serial 0000-0000 : serial 0000-0000 : serial Versions: gcc: gcc (Debian 10.2.1-6) 10.2.1 20210110 python: Python 3.9.2 git: git version 2.30.2 git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.0~pre0 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /usr/lib/linuxcnc/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python3 dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===============-============-============-===================================================================== un linuxcnc (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 1:2.9.0~pre0 all motion controller for CNC machines and robots (English documentation) un linuxcnc-sim (no description available) ii linuxcnc-uspace 1:2.9.0~pre0 amd64 motion controller for CNC machines and robots