(Exported by FreeCAD)
(Post Processor: linuxcnc_post)
(Output Time:2023-09-14 02:04:53.201688)
(begin preamble)
G17 G54 G40 G49 G80 G90
G21
(begin operation: Fixture)
(machine units: mm/min)
G54 
(finish operation: Fixture)
(begin operation: TC: 1in_spoilboard003)
(machine units: mm/min)
(TC: 1in_spoilboard003) 
M5
M6 T2 
G43 H2 
M3 S3000 
(finish operation: TC: 1in_spoilboard003)
(begin operation: MillFace001)
(machine units: mm/min)
(MillFace001) 
G0 Z5.000 
G0 X116.300 Y6.300 
G0 Z3.000 
G1 X116.300 Y6.300 Z-1.000 F45.000 
G1 X116.300 Y-6.300 Z-1.000 F450.000 
G1 X-117.300 Y-6.300 Z-1.000 F450.000 
G1 X-117.300 Y6.300 Z-1.000 F450.000 
G1 X116.300 Y6.300 Z-1.000 F450.000 
G0 Z5.000 
G0 Z5.000 
(finish operation: MillFace001)
(begin postamble)
M05
G17 G54 G90 G80 G40
M2