Error report created by /usr/lib/tcltk/linuxcnc/show_errors.tcl: Print file information: RUN_IN_PLACE=no LINUXCNC_DIR= LINUXCNC_BIN_DIR=/usr/bin LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc LINUXCNC_SCRIPT_DIR= LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules LINUXCNC_CONFIG_DIR= LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs INIVAR=inivar HALCMD=halcmd LINUXCNC_EMCSH=/usr/bin/wish8.6 LINUXCNC - 2.9.0~pre1+git20230208.f1270d6ed7 Machine configuration directory is '/home/maker/linuxcnc/configs/SaberCNC_10' Machine configuration file is 'SaberCNC_10.ini' INIFILE=/home/maker/linuxcnc/configs/SaberCNC_10/SaberCNC_10.ini VERSION=1.1 PARAMETER_FILE=SaberCNC_10_linuxcnc.var TPMOD= HOMEMOD= TASK=milltask HALUI=halui DISPLAY=qtvcp -v -d qtdragon COORDINATES=X Y Z B C KINEMATICS=trivkins coordinates=XYZBC Starting LinuxCNC... Starting LinuxCNC server program: linuxcncsvr Loading Real Time OS, RTAPI, and HAL_LIB modules Starting LinuxCNC IO program: io Starting HAL User Interface program: halui linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod twopass:invoked with <> options twopass:found ./SaberCNC_10.hal twopass:found ./SaberCNC_10_custom.hal twopass:found ./SaberCNC_10_joypad_jog_speed.hal twopass:found ./SaberCNC_10_joypad_xyz.hal twopass:found ./SaberCNC_10_Probe_setup.hal twopass:pass0: loadusr -W hal_input -KRAL Logitech Gamepad identityKinematicsSetup: coordinates:XYZBC Joint 0 ==> Axis X Joint 1 ==> Axis Y Joint 2 ==> Axis Z Joint 3 ==> Axis B Joint 4 ==> Axis C identityKinematicsSetup: Recommend: kinstype=both hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:16:85:43 hm2_eth: discovered 7I96S hm2/hm2_7i96s.0: Low Level init 0.15 hm2/hm2_7i96s.0: Smart Serial Firmware Version 43 hm2/hm2_7i96s.0: 51 I/O Pins used: hm2/hm2_7i96s.0: IO Pin 000 (TB3-01): InM Input Module #0, pin in0 (Input) hm2/hm2_7i96s.0: IO Pin 001 (TB3-02): InM Input Module #0, pin in1 (Input) hm2/hm2_7i96s.0: IO Pin 002 (TB3-03): InM Input Module #0, pin in2 (Input) hm2/hm2_7i96s.0: IO Pin 003 (TB3-04): InM Input Module #0, pin in3 (Input) hm2/hm2_7i96s.0: IO Pin 004 (TB3-05): InM Input Module #0, pin in4 (Input) hm2/hm2_7i96s.0: IO Pin 005 (TB3-06): InM Input Module #0, pin in5 (Input) hm2/hm2_7i96s.0: IO Pin 006 (TB3-07): InM Input Module #0, pin in6 (Input) hm2/hm2_7i96s.0: IO Pin 007 (TB3-08): InM Input Module #0, pin in7 (Input) hm2/hm2_7i96s.0: IO Pin 008 (TB3-09): InM Input Module #0, pin in8 (Input) hm2/hm2_7i96s.0: IO Pin 009 (TB3-10): InM Input Module #0, pin in9 (Input) hm2/hm2_7i96s.0: IO Pin 010 (TB3-11): InM Input Module #0, pin in10 (Input) hm2/hm2_7i96s.0: IO Pin 011 (TB3-13/TB3-14): SSR #0, pin Out-00 (Output) hm2/hm2_7i96s.0: IO Pin 012 (TB3-15/TB3-16): SSR #0, pin Out-01 (Output) hm2/hm2_7i96s.0: IO Pin 013 (TB3-17/TB3-18): SSR #0, pin Out-02 (Output) hm2/hm2_7i96s.0: IO Pin 014 (TB3-19/TB3-20): SSR #0, pin Out-03 (Output) hm2/hm2_7i96s.0: IO Pin 015 (TB3-21/TB3-22): OutM Output Module #0, pin Out-04 (Output) hm2/hm2_7i96s.0: IO Pin 016 (TB3-23/TB3-24): OutM Output Module #0, pin Out-05 (Output) hm2/hm2_7i96s.0: IO Pin 017 (TB1-02/TB1-03): StepGen #0, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 018 (TB1-04/TB1-05): StepGen #0, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 019 (TB1-08/TB1-09): StepGen #1, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 020 (TB1-10/TB1-11): StepGen #1, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 021 (TB1-14/TB1-15): StepGen #2, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 022 (TB1-16/TB1-17): StepGen #2, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 023 (TB1-20/TB1-21): StepGen #3, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 024 (TB1-22-TB1-23): StepGen #3, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 025 (TB2-02/TB2-03): StepGen #4, pin Step (Output) hm2/hm2_7i96s.0: IO Pin 026 (TB2-04/TB2-05): StepGen #4, pin Direction (Output) hm2/hm2_7i96s.0: IO Pin 027 (TB2-07/TB2-08): Encoder #0, pin A (Input) hm2/hm2_7i96s.0: IO Pin 028 (TB2-10/TB2-11): Encoder #0, pin B (Input) hm2/hm2_7i96s.0: IO Pin 029 (TB2-13/TB2-14): Encoder #0, pin Index (Input) hm2/hm2_7i96s.0: IO Pin 030 (TB2-16/TB2-17): IOPort hm2/hm2_7i96s.0: IO Pin 031 (TB2-18/TB2-19): IOPort hm2/hm2_7i96s.0: IO Pin 032 (internal): IOPort hm2/hm2_7i96s.0: IO Pin 033 (internal): SSR #0, pin AC Ref (internal) (Output) hm2/hm2_7i96s.0: IO Pin 034 (P1-01/DB25-01): IOPort hm2/hm2_7i96s.0: IO Pin 035 (P1-02/DB25-14): IOPort hm2/hm2_7i96s.0: IO Pin 036 (P1-03/DB25-02): IOPort hm2/hm2_7i96s.0: IO Pin 037 (P1-04/DB25-15): IOPort hm2/hm2_7i96s.0: IO Pin 038 (P1-05/DB25-03): IOPort hm2/hm2_7i96s.0: IO Pin 039 (P1-06/DB25-16): IOPort hm2/hm2_7i96s.0: IO Pin 040 (P1-07/DB25-04): IOPort hm2/hm2_7i96s.0: IO Pin 041 (P1-08/DB25-17): IOPort hm2/hm2_7i96s.0: IO Pin 042 (P1-09/DB25-05): IOPort hm2/hm2_7i96s.0: IO Pin 043 (P1-11/DB25-06): IOPort hm2/hm2_7i96s.0: IO Pin 044 (P1-13/DB25-07): IOPort hm2/hm2_7i96s.0: IO Pin 045 (P1-15/DB25-08): IOPort hm2/hm2_7i96s.0: IO Pin 046 (P1-17/DB25-09): IOPort hm2/hm2_7i96s.0: IO Pin 047 (P1-19/DB25-10): IOPort hm2/hm2_7i96s.0: IO Pin 048 (P1-21/DB25-11): IOPort hm2/hm2_7i96s.0: IO Pin 049 (P1-23/DB25-12): IOPort hm2/hm2_7i96sStarting TASK program: milltask Starting DISPLAY program: qtvcp Shutting down and cleaning up LinuxCNC... Running HAL shutdown script task: 970 cycles, min=0.000009, max=0.010642, avg=0.009826, 0 latency excursions (> 10x expected cycle time of 0.010000s) note: name is 'Logitech Gamepad F310' note: name is 'Logitech Gamepad F310' .0: IO Pin 050 (P1-25/DB25-13): IOPort hm2/hm2_7i96s.0: registered hm2_eth: in hm2_eth_reset hm2_eth: HostMot2 ethernet driver unloaded hm2: unloading Removing HAL_LIB, RTAPI, and Real Time OS modules Removing NML shared memory segments Debug file information: Note: Using POSIX realtime [QTvcp][INFO] Logging to: /home/maker/linuxcnc/configs/SaberCNC_10/SaberCNC_10_qtdragon.log (logger.py:67) [QTvcp][INFO] Base log level set to: 10 (logger.py:68) [QTvcp][DEBUG] DEBUGGING logging on (qtvcp:493) [QTvcp.QTVCP.QT_ISTAT][DEBUG] Machine is METRIC based. unit Conversion constant=0.03937007874015748 (qt_istat.py:150) [QTvcp.QTVCP.QT_ISTAT][DEBUG] TRAJ COORDINATES: XYZBC (qt_istat.py:161) [QTvcp.QTVCP.QT_ISTAT][DEBUG] DEFAULT_LINEAR_VELOCITY = 360.0 (qt_istat.py:341) [QTvcp.QTVCP.QT_ISTAT][DEBUG] MIN_LINEAR_VELOCITY = 30.0 (qt_istat.py:342) [QTvcp.QTVCP.QT_ISTAT][DEBUG] MAX_LINEAR_VELOCITY = 1800.0 (qt_istat.py:343) [QTvcp.QTVCP.QT_PSTAT][DEBUG] BASEPATH qtdragon (qt_pstat.py:95) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for handler file in: /home/maker/linuxcnc/configs/SaberCNC_10/qtvcp/screens/qtdragon/qtdragon_handler.py (qt_pstat.py:110) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for handler file in: /home/maker/linuxcnc/configs/SaberCNC_10/qtdragon/qtdragon_handler.py (qt_pstat.py:110) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for default handler file in: /usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py (qt_pstat.py:117) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Using DEFAULT handler file path: /usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py (qt_pstat.py:120) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in: /home/maker/linuxcnc/configs/SaberCNC_10/qtvcp/screens/qtdragon/qtdragon.ui (qt_pstat.py:142) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in: /home/maker/linuxcnc/configs/SaberCNC_10/qtdragon/qtdragon.ui (qt_pstat.py:142) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .ui in: /usr/share/qtvcp/screens/qtdragon/qtdragon.ui (qt_pstat.py:149) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Using DEFAULT ui file from: /usr/share/qtvcp/screens/qtdragon/qtdragon.ui (qt_pstat.py:151) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /home/maker/linuxcnc/configs/SaberCNC_10/qtvcp/screens/qtdragon/qtdragon.qss (qt_pstat.py:185) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /home/maker/linuxcnc/configs/SaberCNC_10/qtdragon/qtdragon.qss (qt_pstat.py:185) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qss in: /usr/share/qtvcp/screens/qtdragon/qtdragon.qss (qt_pstat.py:192) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Using DEFAULT qss file from: /usr/share/qtvcp/screens/qtdragon/qtdragon.qss (qt_pstat.py:194) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /home/maker/linuxcnc/configs/SaberCNC_10/qtvcp/screens/qtdragon/qtdragon.qrc (qt_pstat.py:213) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /home/maker/linuxcnc/configs/SaberCNC_10/qtdragon/qtdragon.qrc (qt_pstat.py:213) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for .qrc in: /usr/share/qtvcp/screens/qtdragon/qtdragon.qrc (qt_pstat.py:221) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Using DEFAULT qrc file from: /usr/share/qtvcp/screens/qtdragon/qtdragon.qrc (qt_pstat.py:223) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for resources.py in: /home/maker/linuxcnc/configs/SaberCNC_10/qtvcp/screens/qtdragon/resources.py (qt_pstat.py:238) [QTvcp.QTVCP.QT_PSTAT][INFO] Using LOCAL resources.py file from: /home/maker/linuxcnc/configs/SaberCNC_10/qtvcp/screens/qtdragon/resources.py (qt_pstat.py:242) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for translation file in: /home/maker/linuxcnc/configs/SaberCNC_10/qtvcp/screens/qtdragon/qtdragon.qrc (qt_pstat.py:260) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for translation file in: /home/maker/linuxcnc/configs/SaberCNC_10/qtdragon/languages/qtdragon_en.qm (qt_pstat.py:260) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for translation file in: /usr/share/qtvcp/screens/qtdragon/languages/qtdragon_en.qm (qt_pstat.py:267) [QTvcp.QTVCP.QT_PSTAT][INFO] Using no translations, default system locale is: en (qt_pstat.py:272) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for LOCAL about file in: /home/maker/linuxcnc/configs/SaberCNC_10/qtvcp/screens/qtdragon/qtdragon_ABOUT (qt_pstat.py:283) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Checking for DEFAULT about file in: /usr/share/qtvcp/screens/qtdragon/qtdragon_ABOUT (qt_pstat.py:289) [QTvcp.QTVCP.QT_PSTAT][DEBUG] Using DEFAULT about file path: /usr/share/qtvcp/screens/qtdragon/qtdragon_ABOUT (qt_pstat.py:292) [QTvcp][INFO] Building A LinuxCNC Main Screen with: Python 3 (qtvcp:141) [QTvcp][INFO] No handler file specified on command line. (qtvcp:149) [QTvcp][INFO] No HAL component base name specified on command line using: qtdragon (qtvcp:180) [QTvcp.QTVCP.QT_MAKEGUI][INFO] Qsettings file path: /home/maker/.config/QtVcp/qtdragon.conf (qt_makegui.py:97) [QTvcp][DEBUG] Loading the handler file. (qtvcp:250) [QTvcp.QTVCP.QT_MAKEGUI][DEBUG] Adding import dir: /usr/share/qtvcp/screens/qtdragon (qt_makegui.py:290) [QTvcp.QTVCP.QT_MAKEGUI][DEBUG] Module 'qtdragon_handler' imported OK (qt_makegui.py:301) [QTvcp.QTVCP.QT_MAKEGUI][DEBUG] Module 'qtdragon_handler' : 'get_handlers' function found. (qt_makegui.py:307) [QTvcp.QTVCP.QT_MAKEGUI][DEBUG] Registering handlers in module qtdragon_handler object (qt_makegui.py:317) [QTvcp][DEBUG] Adding the key events filter. (qtvcp:260) [QTvcp.QTVCP.QT_MAKEGUI][INFO] Imported resources.py filed: /home/maker/linuxcnc/configs/SaberCNC_10/qtvcp/screens/qtdragon/resources.py (qt_makegui.py:188) [QTvcp.QTVCP.WIDGETS.SCREEN_OPTIONS][DEBUG] Switching to Preference File Path from INI: WORKINGFOLDER/SaberCNC_10_qtdragon.pref (screen_options.py:300) [QTvcp.QTVCP.QT_MAKEPINS][DEBUG] QTVCP: Parsing for HAL widgets. (qt_makepins.py:114) [QTvcp.QTVCP.WIDGETS.SCREEN_OPTIONS][DEBUG] cannot add notifications to statusbar - no statusbar?: (screen_options.py:267) [QTvcp.QTVCP.WIDGETS.FILE_MANAGER][DEBUG] lAST FILE PATH: /home/maker/linuxcnc/configs/SaberCNC_10/nc_subroutines (file_manager.py:205) [QTvcp.QTVCP.WIDGETS.FILE_MANAGER][DEBUG] lAST FILE PATH: /home/maker/linuxcnc/configs/SaberCNC_10/nc_subroutines (file_manager.py:205) [QTvcp.QTVCP.WIDGETS.JOG_INCREMENTS][DEBUG] Linear Current index: 0 Increment: 0 , selection changed Continuous (jog_increments.py:112) [QTvcp.QTVCP.WIDGETS.JOG_INCREMENTS][DEBUG] Angular Current index: 0 Increment: 0 , selection changed Continuous (jog_increments.py:115) [QTvcp.QTVCP.WIDGETS.DRO_WIDGET][DEBUG] axis number 3 not found in available-axis to joint conversion dict {0: 0, 1: 1, 2: 2, 4: 3, 5: 4} of widget: dro_axis_a (dro_widget.py:72) [QTvcp.QTVCP.WIDGETS.STATUS_LABEL][WARNING] lbl_maxv_percent : no option recognised (status_label.py:162) [QTvcp.QTVCP.WIDGETS.STATUS_LABEL][WARNING] lbl_max_rapid : no option recognised (status_label.py:162) [QTvcp.QTVCP.WIDGETS.STATUS_LABEL][WARNING] lbl_runtime : no option recognised (status_label.py:162) [QTvcp][DEBUG] Calling the handler file's initialized__ function (qtvcp:283) [QTvcp][CRITICAL] Retry from Error Dialog Qtvcp encountered an error. The following information may be useful in troubleshooting: LinuxCNC Version : 2.9.0~pre1+git20230208.f1270d6ed7 Traceback (most recent call last): File "/usr/bin/qtvcp", line 508, in _qtvcp = QTVCP() ^^^^^^^ File "/usr/bin/qtvcp", line 284, in __init__ window.handler_instance.initialized__() File "/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py", line 148, in initialized__ self.init_widgets() File "/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py", line 324, in init_widgets self.adjust_stacked_widgets(TAB_MAIN) File "/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py", line 1220, in adjust_stacked_widgets self.w['dro_button_stack_%s'%i.lower()].setCurrentIndex(num) ~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/lib/python3/dist-packages/qtvcp/qt_makegui.py", line 493, in __getitem__ return getattr(self, item) ^^^^^^^^^^^^^^^^^^^ AttributeError: 'VCPWindow' object has no attribute 'dro_button_stack_b' (qtvcp:468) 2912 2965 Stopping realtime threads Unloading hal components Note: Using POSIX realtime ----------------------------------------------------------------------- Info report created by linuxcnc_info: The file: /tmp/linuxcnc_info.txt can be posted to a forum or a web site like: http://pastebin.com in order to provide information about the linuxcnc system and configuration. Date: Sat Jan 25 09:59:36 PM PST 2025 UTC Date: Sun Jan 26 05:59:36 AM UTC 2025 this program: /usr/bin/linuxcnc_info uptime: 21:59:36 up 25 min, 1 user, load average: 1.61, 0.99, 0.68 lsb_release -sa: Debian Debian GNU/Linux 12 (bookworm) 12 bookworm linuxcnc: /usr/bin/linuxcnc pwd: /home/maker/linuxcnc/configs/SaberCNC_10 USER: maker LOGNAME: maker HOME: /home/maker EDITOR: VISUAL: LANGUAGE: TERM: dumb COLORTERM: DISPLAY: :0.0 DESKTOP: lightdm-xsession display size: 1920x1200 pixels (508x317 millimeters) PATH: /usr/bin:/home/maker/linuxcnc/configs/SaberCNC_10/bin:/usr/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games uname items: nodename -n: SaberCNC kernel-name -s: Linux kernel-vers -v: #1 SMP PREEMPT_RT Debian 6.1.124-1 (2025-01-12) machine -m: x86_64 processor -p: unknown platform -i: unknown oper system -o: GNU/Linux /proc items: cmdline: BOOT_IMAGE=/boot/vmlinuz-6.1.0-30-rt-amd64 root=UUID=ba66a5b0-1e89-4d63-b114-d6c12f4ecbf8 ro quiet isolcpus=3 intel_idle.max_cstate=1 i915.enable_rc6=0 model name: Intel(R) N95 cores: 4 cpu MHz: 1700.003 parport: serial: 0000-0000 : serial Versions: /usr/bin/linuxcnc_info: line 154: gcc: command not found gcc: python: Python 3.11.2 git: not_in_PATH git commit: NA tcl: 8.6 tk: 8.6 glade: not_in_PATH linuxcnc_var all: LINUXCNCVERSION: 2.9.0~pre1+git20230208.f1270d6ed7 LINUXCNC_AUX_GLADEVCP: /usr/share/linuxcnc/aux_gladevcp LINUXCNC_AUX_EXAMPLES: /usr/share/linuxcnc/aux_examples REALTIME: /usr/lib/linuxcnc/realtime RTS: uspace HALLIB_DIR: /usr/share/linuxcnc/hallib PYTHON: /usr/bin/python3 dpkg -l '*linuxcnc*': Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-===================-===================================-============-===================================================================== un linuxcnc (no description available) un linuxcnc-dev (no description available) un linuxcnc-doc (no description available) ii linuxcnc-doc-en 2.9.0~pre1+git20230208.f1270d6ed7-1 all motion controller for CNC machines and robots (English documentation) un linuxcnc-doc-es (no description available) un linuxcnc-doc-fr (no description available) un linuxcnc-sim (no description available) un linuxcnc-sim-dev (no description available) ii linuxcnc-uspace 2.9.0~pre1+git20230208.f1270d6ed7-1 amd64 motion controller for CNC machines and robots ii linuxcnc-uspace-dev 2.9.0~pre1+git20230208.f1270d6ed7-1 amd64 PC based motion controller for real-time Linux