17:12:17 Started program from line 1
17:12:23  Current Comp Mode: 400.000000
17:12:23  Current Coord System: 540.000000
17:12:23  G43 Tool Offset:  1.000000
17:12:23  Current Selected Tool: 42.000000
17:12:23  Current Selected Pocket: 42.000000
17:12:23  Current Tool Loaded: 42.000000
17:12:24  Current Tool Index:  42.000000
17:12:43  5063: 249.4924
17:12:44  5070 Probe fail/success: 1.0000
17:12:44  Current Comp Mode: 400.000000
17:12:44  Current Coord System: 540.000000
17:12:44  G43 Tool Offset:  1.000000
17:12:44  Current Selected Tool: 42.000000
17:12:44  Current Selected Pocket: 42.000000
17:12:44  Current Tool Loaded: 42.000000
17:12:44  Current Tool Index:  42.000000
17:12:47 Tool 42: SpeTool Spiral .5" Shank .5" Dia 2" CL 
17:12:47  5063: 249.6003
17:12:47  5070 Probe fail/success: 1.0000
17:12:47  Current Comp Mode: 400.000000
17:12:47  Current Coord System: 540.000000
17:12:47  G43 Tool Offset:  1.000000
17:12:47  Current Selected Tool: 42.000000
17:12:47  Current Selected Pocket: 42.000000
17:12:47  Current Tool Loaded: 42.000000
17:12:48  Current Tool Index:  42.000000
17:12:48  Current Tool Z Offset: 283.399265
17:12:48  Probe Height: -132.8700
17:12:48  Block Height: -99.0710
17:12:48  Probe Result: 249.6003
17:12:48  5063        : 249.6003
17:12:48  Calculated Offset: 283.3993
17:12:48  5070 Probe fail/success: 1.0000
17:12:48  Current Comp Mode: 400.000000
17:12:48  Current Coord System: 540.000000
17:12:49  G43 Tool Offset:  1.000000
17:12:49  Current Selected Tool: 42.000000
17:12:49  Current Selected Pocket: 42.000000
17:12:49  Current Tool Loaded: 42.000000
17:12:49  Current Tool Index:  42.000000
17:12:49  Return to original tool-tip position using new z-offset: -4.486000 , -98.845621 , 85.668160
17:13:12 Machine OFF
17:13:12 Run timer stopped at 00:00:55