[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cf590000 (usable)
[    0.000000]  BIOS-e820: 00000000cf590000 - 00000000cf5e3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cf5e3000 - 00000000cf5f0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cf5f0000 - 00000000cf600000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000012c000000 (usable)
[    0.000000] DMI 2.5 present.
[    0.000000] last_pfn = 0xcf590 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CAFFF write-protect
[    0.000000]   CB000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 100000000 mask FE0000000 write-back
[    0.000000]   1 base 120000000 mask FF0000000 write-back
[    0.000000]   2 base 000000000 mask F80000000 write-back
[    0.000000]   3 base 080000000 mask FC0000000 write-back
[    0.000000]   4 base 0C0000000 mask FF0000000 write-back
[    0.000000]   5 base 0CF700000 mask FFFF00000 uncachable
[    0.000000]   6 base 0CF800000 mask FFF800000 uncachable
[    0.000000]   7 base 0CF600000 mask FFFF00000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000cf600000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009f400 (usable)
[    0.000000]  modified: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000cf590000 (usable)
[    0.000000]  modified: 00000000cf590000 - 00000000cf5e3000 (ACPI NVS)
[    0.000000]  modified: 00000000cf5e3000 - 00000000cf5f0000 (ACPI data)
[    0.000000]  modified: 00000000cf5f0000 - 00000000cf600000 (reserved)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  modified: 0000000100000000 - 000000012c000000 (usable)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 37365000 - 37fef8ed
[    0.000000] Allocated new RAMDISK: 008b5000 - 0153f8ed
[    0.000000] Move RAMDISK from 0000000037365000 - 0000000037fef8ec to 008b5000 - 0153f8ec
[    0.000000] ACPI: RSDP 000f7880 00014 (v00 ITINFO)
[    0.000000] ACPI: RSDT cf5e3000 0003C (v01 ITINFO          42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP cf5e3080 00074 (v01 ITINFO          42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT cf5e3100 050E8 (v01 ITINFO AWRDACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS cf590000 00040
[    0.000000] ACPI: SLIC cf5e8200 00176 (v01 ITINFO          42302E31 AWRD 00000000)
[    0.000000] ACPI: HPET cf5e8480 00038 (v01 ITINFO          42302E31 AWRD 00000098)
[    0.000000] ACPI: MCFG cf5e84c0 0003C (v01 ITINFO          42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC cf5e8380 00084 (v01 ITINFO          42302E31 AWRD 00000000)
[    0.000000] ACPI: SSDT cf5e8b60 003A8 (v01  PmRef    CpuPm 00003000 INTL 20060912)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2429MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008b0db8]    TEXT DATA BSS ==> [0000100000 - 00008b0db8]
[    0.000000]   #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
[    0.000000]   #5 [00008b1000 - 00008b40de]              BRK ==> [00008b1000 - 00008b40de]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [00008b5000 - 000153f8ed]      NEW RAMDISK ==> [00008b5000 - 000153f8ed]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] found SMP MP-table at [c00f3810] f3810
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000cf590
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000cf590
[    0.000000] On node 0 totalpages: 849195
[    0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c1541000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4860 pages used for memmap
[    0.000000]   HighMem zone: 617110 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] Allocating PCI resources starting at cf600000 (gap: cf600000:10a00000)
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 24 pages/cpu @c3000000 s74936 r0 d23368 u1048576
[    0.000000] pcpu-alloc: s74936 r0 d23368 u1048576 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 842559
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=8c516ae1-d11c-4b75-a601-eb7925a7c851 ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] allocated 16985920 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:000cf590)
[    0.000000] Memory: 3330548k/3397184k available (4539k kernel code, 65148k reserved, 1928k data, 620k init, 2487880k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1e000 - 0xfffff000   ( 900 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc0751000 - 0xc07ec000   ( 620 kB)
[    0.000000]       .data : 0xc056ecbc - 0xc0750e68   (1928 kB)
[    0.000000]       .text : 0xc0100000 - 0xc056ecbc   (4539 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:440
[    0.000000] I-pipe 2.6-03: pipeline enabled.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2925.863 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5851.72 BogoMIPS (lpj=11703452)
[    0.004019] Security Framework initialized
[    0.004036] AppArmor: AppArmor initialized
[    0.004041] Mount-cache hash table entries: 512
[    0.004141] Initializing cgroup subsys ns
[    0.004144] Initializing cgroup subsys cpuacct
[    0.004148] Initializing cgroup subsys memory
[    0.004153] Initializing cgroup subsys devices
[    0.004155] Initializing cgroup subsys freezer
[    0.004157] Initializing cgroup subsys net_cls
[    0.004172] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004174] CPU: L2 cache: 3072K
[    0.004176] CPU: Physical Processor ID: 0
[    0.004178] CPU: Processor Core ID: 0
[    0.004180] mce: CPU supports 6 MCE banks
[    0.004187] CPU0: Thermal monitoring enabled (TM2)
[    0.004194] Performance Events: Core2 events, Intel PMU driver.
[    0.004199] ... version:                2
[    0.004201] ... bit width:              40
[    0.004202] ... generic registers:      2
[    0.004203] ... value mask:             000000ffffffffff
[    0.004205] ... max period:             000000007fffffff
[    0.004206] ... fixed-purpose events:   3
[    0.004207] ... event mask:             0000000700000003
[    0.004211] Checking 'hlt' instruction... OK.
[    0.020808] ACPI: Core revision 20090903
[    0.028006] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.028010] ftrace: allocating 21003 entries in 42 pages
[    0.036544] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.036844] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.040001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.040001] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.040001] ..... (found apic 0 pin 2) ...
[    0.080219] ....... works.
[    0.080221] CPU0: Intel(R) Core(TM)2 Duo CPU     E7500  @ 2.93GHz stepping 0a
[    0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008000] CPU: L2 cache: 3072K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU1: Thermal monitoring enabled (TM2)
[    0.168040] CPU1: Intel(R) Core(TM)2 Duo CPU     E7500  @ 2.93GHz stepping 0a
[    0.168048] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.172015] Brought up 2 CPUs
[    0.172017] Total of 2 processors activated (11704.02 BogoMIPS).
[    0.172448] CPU0 attaching sched-domain:
[    0.172451]  domain 0: span 0-1 level MC
[    0.172453]   groups: 0 1
[    0.172458] CPU1 attaching sched-domain:
[    0.172460]  domain 0: span 0-1 level MC
[    0.172462]   groups: 1 0
[    0.172540] devtmpfs: initialized
[    0.172540] regulator: core version 0.5
[    0.172540] NET: Registered protocol family 16
[    0.172540] Trying to unpack rootfs image as initramfs...
[    0.172540] EISA bus registered
[    0.172540] ACPI: bus type pci registered
[    0.172540] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.172540] PCI: MCFG area at e0000000 reserved in E820
[    0.172540] PCI: Using MMCONFIG for extended config space
[    0.172540] PCI: Using configuration type 1 for base access
[    0.172799] bio: create slab <bio-0> at 0
[    0.173425] ACPI: EC: Look up EC in DSDT
[    0.179695] ACPI: Interpreter enabled
[    0.179697] ACPI: (supports S0 S5)
[    0.179705] ACPI: Using IOAPIC for interrupt routing
[    0.184349] ACPI: No dock devices found.
[    0.184425] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.184494] pci 0000:00:02.0: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff]
[    0.184498] pci 0000:00:02.0: reg 14 io port: [0xff00-0xff07]
[    0.184501] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[    0.184505] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfda00000-0xfdafffff]
[    0.184541] pci 0000:00:03.0: reg 10 64bit mmio: [0xfdfff000-0xfdfff00f]
[    0.184563] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.184566] pci 0000:00:03.0: PME# disabled
[    0.184629] pci 0000:00:1a.0: reg 20 io port: [0xfe00-0xfe1f]
[    0.184691] pci 0000:00:1a.1: reg 20 io port: [0xfd00-0xfd1f]
[    0.184752] pci 0000:00:1a.2: reg 20 io port: [0xfc00-0xfc1f]
[    0.184815] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdffe000-0xfdffe3ff]
[    0.184864] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.184867] pci 0000:00:1a.7: PME# disabled
[    0.184902] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff4000-0xfdff7fff]
[    0.184939] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.184942] pci 0000:00:1b.0: PME# disabled
[    0.184997] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.185000] pci 0000:00:1c.0: PME# disabled
[    0.185057] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.185060] pci 0000:00:1c.4: PME# disabled
[    0.185116] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.185119] pci 0000:00:1c.5: PME# disabled
[    0.185166] pci 0000:00:1d.0: reg 20 io port: [0xfb00-0xfb1f]
[    0.185226] pci 0000:00:1d.1: reg 20 io port: [0xfa00-0xfa1f]
[    0.185288] pci 0000:00:1d.2: reg 20 io port: [0xf900-0xf91f]
[    0.185352] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdffd000-0xfdffd3ff]
[    0.185400] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.185404] pci 0000:00:1d.7: PME# disabled
[    0.185513] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.185516] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.185519] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[    0.185522] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.185525] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b)
[    0.185571] pci 0000:00:1f.2: reg 10 io port: [0xf800-0xf807]
[    0.185575] pci 0000:00:1f.2: reg 14 io port: [0xf700-0xf703]
[    0.185580] pci 0000:00:1f.2: reg 18 io port: [0xf600-0xf607]
[    0.185585] pci 0000:00:1f.2: reg 1c io port: [0xf500-0xf503]
[    0.185590] pci 0000:00:1f.2: reg 20 io port: [0xf400-0xf40f]
[    0.185595] pci 0000:00:1f.2: reg 24 io port: [0xf300-0xf30f]
[    0.185634] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfdffc000-0xfdffc0ff]
[    0.185645] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[    0.185682] pci 0000:00:1f.5: reg 10 io port: [0xf100-0xf107]
[    0.185687] pci 0000:00:1f.5: reg 14 io port: [0xf000-0xf003]
[    0.185692] pci 0000:00:1f.5: reg 18 io port: [0xef00-0xef07]
[    0.185696] pci 0000:00:1f.5: reg 1c io port: [0xee00-0xee03]
[    0.185701] pci 0000:00:1f.5: reg 20 io port: [0xed00-0xed0f]
[    0.185706] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f]
[    0.185766] pci 0000:00:1c.0: bridge io port: [0xa000-0xafff]
[    0.185769] pci 0000:00:1c.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff]
[    0.185774] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfd600000-0xfd6fffff]
[    0.185828] pci 0000:02:00.0: reg 10 io port: [0xdf00-0xdf07]
[    0.185837] pci 0000:02:00.0: reg 14 io port: [0xde00-0xde03]
[    0.185845] pci 0000:02:00.0: reg 18 io port: [0xdd00-0xdd07]
[    0.185854] pci 0000:02:00.0: reg 1c io port: [0xdc00-0xdc03]
[    0.185862] pci 0000:02:00.0: reg 20 io port: [0xdb00-0xdb0f]
[    0.185877] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[    0.185955] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[    0.185958] pci 0000:00:1c.4: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[    0.185963] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]
[    0.186005] pci 0000:03:00.0: reg 10 io port: [0xce00-0xceff]
[    0.186024] pci 0000:03:00.0: reg 18 64bit mmio: [0xfdcff000-0xfdcfffff]
[    0.186037] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xfdbf0000-0xfdbfffff]
[    0.186044] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.186080] pci 0000:03:00.0: supports D1 D2
[    0.186082] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.186086] pci 0000:03:00.0: PME# disabled
[    0.186137] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff]
[    0.186140] pci 0000:00:1c.5: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
[    0.186145] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
[    0.186187] pci 0000:00:1e.0: transparent bridge
[    0.186190] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
[    0.186194] pci 0000:00:1e.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
[    0.186199] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff]
[    0.186214] pci_bus 0000:00: on NUMA node 0
[    0.186218] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.186372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.186425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.186470] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    0.186515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.202477] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.202561] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.202642] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.202724] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.202805] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.202887] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.202968] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.203050] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.203140] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.203151] vgaarb: loaded
[    0.203248] SCSI subsystem initialized
[    0.203325] libata version 3.00 loaded.
[    0.203376] usbcore: registered new interface driver usbfs
[    0.203384] usbcore: registered new interface driver hub
[    0.203402] usbcore: registered new device driver usb
[    0.203497] ACPI: WMI: Mapper loaded
[    0.203499] PCI: Using ACPI for IRQ routing
[    0.203628] NetLabel: Initializing
[    0.203629] NetLabel:  domain hash size = 128
[    0.203630] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.203641] NetLabel:  unlabeled traffic allowed by default
[    0.203662] Switching to clocksource tsc
[    0.203766] AppArmor: AppArmor Filesystem Enabled
[    0.203766] pnp: PnP ACPI init
[    0.203766] ACPI: bus type pnp registered
[    0.204367] pnp: PnP ACPI: found 17 devices
[    0.204369] ACPI: ACPI bus type pnp unregistered
[    0.204372] PnPBIOS: Disabled by ACPI PNP
[    0.204380] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.204383] system 00:01: ioport range 0x800-0x87f has been reserved
[    0.204385] system 00:01: ioport range 0x290-0x297 has been reserved
[    0.204387] system 00:01: ioport range 0x880-0x88f has been reserved
[    0.204394] system 00:0d: ioport range 0x400-0x4bf could not be reserved
[    0.204398] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
[    0.204403] system 00:10: iomem range 0xf0000-0xfffff could not be reserved
[    0.204405] system 00:10: iomem range 0xcf600000-0xcf6fffff could not be reserved
[    0.204407] system 00:10: iomem range 0xfed00000-0xfed000ff has been reserved
[    0.204410] system 00:10: iomem range 0xcf590000-0xcf5fffff could not be reserved
[    0.204412] system 00:10: iomem range 0x0-0x9ffff could not be reserved
[    0.204414] system 00:10: iomem range 0x100000-0xcf58ffff could not be reserved
[    0.204417] system 00:10: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.204419] system 00:10: iomem range 0xfed13000-0xfed1ffff has been reserved
[    0.204421] system 00:10: iomem range 0xfed20000-0xfed3ffff has been reserved
[    0.204423] system 00:10: iomem range 0xfed45000-0xfed9ffff has been reserved
[    0.204426] system 00:10: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.204428] system 00:10: iomem range 0xffb00000-0xffb7ffff has been reserved
[    0.204430] system 00:10: iomem range 0xfff00000-0xffffffff has been reserved
[    0.204432] system 00:10: iomem range 0xe0000-0xeffff has been reserved
[    0.239093] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.239098] pci 0000:00:1c.0:   IO window: 0xa000-0xafff
[    0.239102] pci 0000:00:1c.0:   MEM window: 0xfd700000-0xfd7fffff
[    0.239105] pci 0000:00:1c.0:   PREFETCH window: 0x000000fd600000-0x000000fd6fffff
[    0.239112] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
[    0.239115] pci 0000:00:1c.4:   IO window: 0xd000-0xdfff
[    0.239119] pci 0000:00:1c.4:   MEM window: 0xfde00000-0xfdefffff
[    0.239123] pci 0000:00:1c.4:   PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[    0.239128] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03
[    0.239130] pci 0000:00:1c.5:   IO window: 0xc000-0xcfff
[    0.239134] pci 0000:00:1c.5:   MEM window: 0xfdc00000-0xfdcfffff
[    0.239138] pci 0000:00:1c.5:   PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
[    0.239143] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    0.239145] pci 0000:00:1e.0:   IO window: 0xb000-0xbfff
[    0.239149] pci 0000:00:1e.0:   MEM window: 0xfd900000-0xfd9fffff
[    0.239152] pci 0000:00:1e.0:   PREFETCH window: 0x000000fd800000-0x000000fd8fffff
[    0.239169]   alloc irq_desc for 16 on node -1
[    0.239170]   alloc kstat_irqs on node -1
[    0.239176] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.239180] pci 0000:00:1c.0: setting latency timer to 64
[    0.239187] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.239190] pci 0000:00:1c.4: setting latency timer to 64
[    0.239197]   alloc irq_desc for 17 on node -1
[    0.239199]   alloc kstat_irqs on node -1
[    0.239201] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.239204] pci 0000:00:1c.5: setting latency timer to 64
[    0.239210] pci 0000:00:1e.0: setting latency timer to 64
[    0.239213] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.239216] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.239218] pci_bus 0000:01: resource 0 io:  [0xa000-0xafff]
[    0.239220] pci_bus 0000:01: resource 1 mem: [0xfd700000-0xfd7fffff]
[    0.239221] pci_bus 0000:01: resource 2 pref mem [0xfd600000-0xfd6fffff]
[    0.239223] pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
[    0.239225] pci_bus 0000:02: resource 1 mem: [0xfde00000-0xfdefffff]
[    0.239227] pci_bus 0000:02: resource 2 pref mem [0xfdd00000-0xfddfffff]
[    0.239229] pci_bus 0000:03: resource 0 io:  [0xc000-0xcfff]
[    0.239231] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff]
[    0.239233] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff]
[    0.239235] pci_bus 0000:04: resource 0 io:  [0xb000-0xbfff]
[    0.239237] pci_bus 0000:04: resource 1 mem: [0xfd900000-0xfd9fffff]
[    0.239239] pci_bus 0000:04: resource 2 pref mem [0xfd800000-0xfd8fffff]
[    0.239240] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    0.239242] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[    0.239275] NET: Registered protocol family 2
[    0.239353] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.239586] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.239952] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.240146] TCP: Hash tables configured (established 131072 bind 65536)
[    0.240147] TCP reno registered
[    0.240211] NET: Registered protocol family 1
[    0.240224] pci 0000:00:02.0: Boot video device
[    0.240513] Scanning for low memory corruption every 60 seconds
[    0.240586] audit: initializing netlink socket (disabled)
[    0.240594] type=2000 audit(1665670516.240:1): initialized
[    0.246491] highmem bounce pool size: 64 pages
[    0.246495] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.247592] VFS: Disk quotas dquot_6.5.2
[    0.247633] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.248049] fuse init (API version 7.13)
[    0.248111] msgmni has been set to 1647
[    0.248291] alg: No test for stdrng (krng)
[    0.248330] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.248332] io scheduler noop registered
[    0.248334] io scheduler anticipatory registered
[    0.248335] io scheduler deadline registered
[    0.248366] io scheduler cfq registered (default)
[    0.248476]   alloc irq_desc for 24 on node -1
[    0.248478]   alloc kstat_irqs on node -1
[    0.248487] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.248494] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.248587]   alloc irq_desc for 25 on node -1
[    0.248589]   alloc kstat_irqs on node -1
[    0.248595] pcieport 0000:00:1c.4: irq 25 for MSI/MSI-X
[    0.248602] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.248696]   alloc irq_desc for 26 on node -1
[    0.248697]   alloc kstat_irqs on node -1
[    0.248702] pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
[    0.248709] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.248772] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.248852] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.248902] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.248905] ACPI: Power Button [PWRB]
[    0.248950] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.248952] ACPI: Power Button [PWRF]
[    0.249901] hpet_acpi_add: no address or irqs in _CRS
[    0.249948] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.250033] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.250117] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.250374] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.250487] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.251292] brd: module loaded
[    0.251624] loop: module loaded
[    0.251683] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.251747] ata_piix 0000:00:1f.2: version 2.13
[    0.251760]   alloc irq_desc for 19 on node -1
[    0.251761]   alloc kstat_irqs on node -1
[    0.251766] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.251770] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    0.251803] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.251870] scsi0 : ata_piix
[    0.251929] isapnp: Scanning for PnP cards...
[    0.300840] scsi1 : ata_piix
[    0.301384] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[    0.301388] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[    0.301417] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.301421] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.301460] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.308332] scsi2 : ata_piix
[    0.352580] scsi3 : ata_piix
[    0.352879] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
[    0.352883] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
[    0.352949] pata_acpi 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.352976] pata_acpi 0000:02:00.0: setting latency timer to 64
[    0.352988] pata_acpi 0000:02:00.0: PCI INT A disabled
[    0.353210] Fixed MDIO Bus: probed
[    0.353235] PPP generic driver version 2.4.2
[    0.353283] tun: Universal TUN/TAP device driver, 1.6
[    0.353284] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.353354] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.353369]   alloc irq_desc for 18 on node -1
[    0.353370]   alloc kstat_irqs on node -1
[    0.353377] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.353388] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.353391] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.353412] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.353435] ehci_hcd 0000:00:1a.7: debug port 1
[    0.357323] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.357339] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000
[    0.372370] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.372453] usb usb1: configuration #1 chosen from 1 choice
[    0.372476] hub 1-0:1.0: USB hub found
[    0.372482] hub 1-0:1.0: 6 ports detected
[    0.372532]   alloc irq_desc for 23 on node -1
[    0.372534]   alloc kstat_irqs on node -1
[    0.372539] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.372551] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.372553] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.372577] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.372595] ehci_hcd 0000:00:1d.7: debug port 1
[    0.376492] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.376504] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000
[    0.400434] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.400529] usb usb2: configuration #1 chosen from 1 choice
[    0.400552] hub 2-0:1.0: USB hub found
[    0.400558] hub 2-0:1.0: 6 ports detected
[    0.400608] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.400623] uhci_hcd: USB Universal Host Controller Interface driver
[    0.400662] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.400670] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.400673] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.400699] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.400729] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
[    0.400792] usb usb3: configuration #1 chosen from 1 choice
[    0.400809] hub 3-0:1.0: USB hub found
[    0.400814] hub 3-0:1.0: 2 ports detected
[    0.400845]   alloc irq_desc for 21 on node -1
[    0.400847]   alloc kstat_irqs on node -1
[    0.400852] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.400856] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.400859] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.400881] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.400904] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
[    0.400970] usb usb4: configuration #1 chosen from 1 choice
[    0.400987] hub 4-0:1.0: USB hub found
[    0.400992] hub 4-0:1.0: 2 ports detected
[    0.401022] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.401026] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.401029] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.401055] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.401074] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
[    0.401133] usb usb5: configuration #1 chosen from 1 choice
[    0.401150] hub 5-0:1.0: USB hub found
[    0.401155] hub 5-0:1.0: 2 ports detected
[    0.401187] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.401191] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.401194] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.401216] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.401235] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
[    0.401297] usb usb6: configuration #1 chosen from 1 choice
[    0.401314] hub 6-0:1.0: USB hub found
[    0.401319] hub 6-0:1.0: 2 ports detected
[    0.401352] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.401356] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.401358] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.401379] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.401397] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
[    0.401456] usb usb7: configuration #1 chosen from 1 choice
[    0.401473] hub 7-0:1.0: USB hub found
[    0.401478] hub 7-0:1.0: 2 ports detected
[    0.401509] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.401514] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.401516] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.401537] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.401555] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
[    0.401615] usb usb8: configuration #1 chosen from 1 choice
[    0.401632] hub 8-0:1.0: USB hub found
[    0.401637] hub 8-0:1.0: 2 ports detected
[    0.401710] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.402048] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.402053] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.402106] mice: PS/2 mouse device common for all mice
[    0.402182] rtc_cmos 00:04: RTC can wake from S4
[    0.402212] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.402231] rtc0: alarms up to one month, 242 bytes nvram
[    0.402304] device-mapper: uevent: version 1.0.3
[    0.403748] Freeing initrd memory: 12842k freed
[    0.408483] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.408565] device-mapper: multipath: version 1.1.0 loaded
[    0.408567] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.408666] EISA: Probing bus 0 at eisa.0
[    0.408690] EISA: Detected 0 cards.
[    0.408692] cpuidle: using governor ladder
[    0.408694] cpuidle: using governor menu
[    0.409011] TCP cubic registered
[    0.409129] NET: Registered protocol family 10
[    0.409446] lo: Disabled Privacy Extensions
[    0.409668] NET: Registered protocol family 17
[    0.409691] Using IPI No-Shortcut mode
[    0.409747] registered taskstats version 1
[    0.410111] rtc_cmos 00:04: setting system clock to 2022-10-13 14:15:16 UTC (1665670516)
[    0.410114] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.410116] EDD information not available.
[    0.433768] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.605530] isapnp: No Plug & Play device found
[    0.674798] ata2: SATA link down (SStatus 0 SControl 300)
[    0.742693] ata3: SATA link down (SStatus 0 SControl 300)
[    0.754690] ata4: SATA link down (SStatus 0 SControl 300)
[    0.824121] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.860465] ata1.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[    0.860469] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.876398] ata1.00: configured for UDMA/133
[    0.876541] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
[    0.876679] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.876686] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.876715] sd 0:0:0:0: [sda] Write Protect is off
[    0.876717] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.876741] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.876847]  sda: sda1 sda2 sda3 < sda5 >
[    0.914742] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.914755] Freeing unused kernel memory: 620k freed
[    0.915029] Write protecting the kernel text: 4540k
[    0.915052] Write protecting the kernel read-only data: 1668k
[    0.927413] udev: starting version 151
[    0.982716] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.982732] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.982764] r8169 0000:03:00.0: setting latency timer to 64
[    0.982803]   alloc irq_desc for 27 on node -1
[    0.982805]   alloc kstat_irqs on node -1
[    0.982815] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[    0.983019] Linux agpgart interface v0.103
[    0.983259] eth0: RTL8168c/8111c at 0xf809c000, 00:40:a7:16:f9:18, XID 1c2000c0 IRQ 27
[    0.986389] agpgart-intel 0000:00:00.0: Intel Q33 Chipset
[    0.987046] agpgart-intel 0000:00:00.0: detected 7164K stolen memory
[    0.998815] pata_jmicron 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.998844] pata_jmicron 0000:02:00.0: setting latency timer to 64
[    1.018162] Floppy drive(s): fd0 is 1.44M
[    1.019873] scsi4 : pata_jmicron
[    1.022522] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.023328] scsi5 : pata_jmicron
[    1.023366] ata5: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
[    1.023368] ata6: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
[    1.035824] FDC 0 is a post-1991 82077
[    1.096451] [drm] Initialized drm 1.1.0 20060810
[    1.338616] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.338620] i915 0000:00:02.0: setting latency timer to 64
[    1.340650] mtrr: no more MTRRs available
[    1.340652] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    1.340707]   alloc irq_desc for 28 on node -1
[    1.340709]   alloc kstat_irqs on node -1
[    1.340716] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[    1.340721] [drm] set up 7M of stolen space
[    1.341009] [drm] initialized overlay support
[    1.403397] fb0: inteldrmfb frame buffer device
[    1.403400] registered panic notifier
[    1.403445] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    1.404652] vga16fb: initializing
[    1.404655] vga16fb: mapped to 0xc00a0000
[    1.404657] vga16fb: not registering due to another framebuffer present
[    1.506517] Console: switching to colour frame buffer device 128x48
[    1.753428] xor: automatically using best checksumming function: pIII_sse
[    1.771992]    pIII_sse  : 11314.000 MB/sec
[    1.771993] xor: using function: pIII_sse (11314.000 MB/sec)
[    1.773732] device-mapper: dm-raid45: initialized v0.2594b
[    6.915183] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   11.875926] udev: starting version 151
[   11.990510] udev: renamed network interface eth0 to eth2
[   12.027180] lp: driver loaded but no devices found
[   12.067409] parport_pc 00:0a: reported by Plug and Play ACPI
[   12.067451] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   12.082264] ppdev: user-space parallel port driver
[   12.105088] type=1505 audit(1665670528.194:2):  operation="profile_load" pid=730 name="/sbin/dhclient3"
[   12.105577] type=1505 audit(1665670528.194:3):  operation="profile_load" pid=730 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   12.105847] type=1505 audit(1665670528.194:4):  operation="profile_load" pid=730 name="/usr/lib/connman/scripts/dhclient-script"
[   12.106883] type=1505 audit(1665670528.194:5):  operation="profile_replace" pid=747 name="/sbin/dhclient3"
[   12.107376] type=1505 audit(1665670528.194:6):  operation="profile_replace" pid=747 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   12.107648] type=1505 audit(1665670528.194:7):  operation="profile_replace" pid=747 name="/usr/lib/connman/scripts/dhclient-script"
[   12.148854]   alloc irq_desc for 22 on node -1
[   12.148856]   alloc kstat_irqs on node -1
[   12.148862] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   12.148901] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   12.160710] lp0: using parport0 (interrupt-driven).
[   12.219109] hda_codec: ALC888: BIOS auto-probing.
[   12.220763] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[   12.232437] psmouse serio1: ID: 10 00 64
[   12.248483] r8169: eth2: link up
[   12.248490] r8169: eth2: link up
[   12.279489] EXT4-fs (sda2): mounted filesystem with ordered data mode
[   12.829530] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   13.231115] type=1505 audit(1665670529.317:8):  operation="profile_load" pid=1016 name="/usr/share/gdm/guest-session/Xsession"
[   13.231229] type=1505 audit(1665670529.317:9):  operation="profile_replace" pid=1017 name="/sbin/dhclient3"
[   13.231723] type=1505 audit(1665670529.317:10):  operation="profile_replace" pid=1017 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   13.231999] type=1505 audit(1665670529.317:11):  operation="profile_replace" pid=1017 name="/usr/lib/connman/scripts/dhclient-script"
[   13.719362] CPU0 attaching NULL sched-domain.
[   13.719366] CPU1 attaching NULL sched-domain.
[   13.740550] CPU0 attaching sched-domain:
[   13.740552]  domain 0: span 0-1 level MC
[   13.740555]   groups: 0 1
[   13.740559] CPU1 attaching sched-domain:
[   13.740561]  domain 0: span 0-1 level MC
[   13.740563]   groups: 1 0
[   15.026357] CPU0 attaching NULL sched-domain.
[   15.026361] CPU1 attaching NULL sched-domain.
[   15.048071] CPU0 attaching sched-domain:
[   15.048076]  domain 0: span 0-1 level MC
[   15.048080]   groups: 0 1
[   15.048087] CPU1 attaching sched-domain:
[   15.048089]  domain 0: span 0-1 level MC
[   15.048093]   groups: 1 0
[   22.708008] eth2: no IPv6 routers present
[  228.328014] usb 6-1: new low speed USB device using uhci_hcd and address 2
[  228.503159] usb 6-1: configuration #1 chosen from 1 choice
[  228.514202] usbcore: registered new interface driver hiddev
[  228.526272] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input6
[  228.526361] generic-usb 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[  228.526380] usbcore: registered new interface driver usbhid
[  228.526382] usbhid: v2.6:USB HID core driver
[  322.932018] usb 2-5: new high speed USB device using ehci_hcd and address 3
[  323.066196] usb 2-5: configuration #1 chosen from 1 choice
[  323.108182] Initializing USB Mass Storage driver...
[  323.108308] scsi6 : SCSI emulation for USB Mass Storage devices
[  323.108374] usbcore: registered new interface driver usb-storage
[  323.108377] USB Mass Storage support registered.
[  323.110007] usb-storage: device found at 3
[  323.110010] usb-storage: waiting for device to settle before scanning
[  328.108186] usb-storage: device scan complete
[  328.108804] scsi 6:0:0:0: Direct-Access     VendorCo ProductCode      2.00 PQ: 0 ANSI: 4
[  328.110099] sd 6:0:0:0: Attached scsi generic sg1 type 0
[  328.110269] sd 6:0:0:0: [sdb] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
[  328.111151] sd 6:0:0:0: [sdb] Write Protect is off
[  328.111154] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[  328.111156] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  328.113159] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  328.113165]  sdb: unknown partition table
[  328.117025] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  328.117029] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  359.884736] end_request: I/O error, dev fd0, sector 0
[  389.724835] end_request: I/O error, dev fd0, sector 0
[  404.884354] end_request: I/O error, dev fd0, sector 0
[  452.892452] end_request: I/O error, dev fd0, sector 0
[  518.128897] end_request: I/O error, dev fd0, sector 0
[  568.728492] end_request: I/O error, dev fd0, sector 0
[  571.516190] usb 2-5: USB disconnect, address 3
[  637.376017] usb 2-5: new high speed USB device using ehci_hcd and address 4
[  637.510203] usb 2-5: configuration #1 chosen from 1 choice
[  637.510437] scsi7 : SCSI emulation for USB Mass Storage devices
[  637.510550] usb-storage: device found at 4
[  637.510551] usb-storage: waiting for device to settle before scanning
[  642.508199] usb-storage: device scan complete
[  642.508813] scsi 7:0:0:0: Direct-Access     VendorCo ProductCode      2.00 PQ: 0 ANSI: 4
[  642.509349] sd 7:0:0:0: Attached scsi generic sg1 type 0
[  642.510920] sd 7:0:0:0: [sdb] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
[  642.511405] sd 7:0:0:0: [sdb] Write Protect is off
[  642.511408] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
[  642.511410] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[  642.513414] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[  642.513420]  sdb:
[  642.515906] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[  642.515909] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[  968.162554] I-pipe: Domain RTAI registered.
[  968.162559] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
[  968.162561] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
[  968.162582] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
[  968.162584] PIPELINE layers:
[  968.162585] f8a64e20 9ac15d93 RTAI 200
[  968.162587] c085cb20 0 Linux 100
[  968.176422] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
[  968.176518] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
[  968.176522] RTAI[sched]: hard timer type/freq = APIC/16624720(Hz); default timing: periodic; linear timed lists.
[  968.176524] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2925863000 hz.
[  968.176526] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
[  968.176578] RTAI[usi]: enabled.
[  968.208200] RTAI[math]: loaded.
[  968.312696] abbirb: module license 'unspecified' taints kernel.
[  968.312699] Disabling lock debugging due to kernel taint